FLASH BACK TO THE WIDE FOR UNDO TABLESPACE?

Similar Questions

• Back to the widi r7-571

  Ok. The r7 is advertised as being capable of widi. I know that's not the broadcom adapter. So I happened to have a processor intel advanced n6235 or two sitting and jumped in. The wireless works fine. Bluetooth does not even appear in the Device Manager. And without ability of widi. Although the check utility intel widi does no upgrade needed. But it says the same thing with the installed broadcom. I can't find anything showing a difference at the level of the pci-e material between the cards. Just talking about bios of some possible oem on a whitelist for some manufacturers. But in this case the intel should not work at all. Any ideas? Even if there was a difference in the interface, I would buy another card. But the 6235 is a solid card I have used quite awhile now, everything's supposed half work in this laptop. And I don't know what other card works better anyway. Thank you.

  Ok. Ive heard stories of people lose widi connectability after upgrade to windows 8.1. So I reinstalled back to windows 8, put my intel advanced n-6235 back, updated drivers and installed the widi windows application 8. Run this application, I know to connect to my netgear ptv3000 widi, and my screen is finally connected wireless on my 42 inch TV. For once for all certainly is possible on an r7-571 acer with windows 8.

• screen freezes during the game, flashing white, go to the desktop, then flashes back to the game

  I need help to yall! So I had this problem when I play games, once from time to time the screen freezes, flashes white, go to the desktop and then back to the game. Seems to happen more frequently when a lot is happening at the same time during the game. I ran the windows performance test and return these errors

  Error

  Symptom: Device drivers are not installed. Cause: A driver has not been installed for this device to operate properly. Details: The device for Universal Serial Bus (USB) driver Controller has not been installed. This device won't be available until the appropriate device driver is installed. Resolution: 1. try to install the drivers using Windows Update. 2 install the drivers located on the installation media that came with the unit. 3. check with the manufacturer for an update pilot. Partners: Explanation of Error codes generated by Device Manager Symptom: Device is not present, not working not properly. or does not all its drivers installed. Cause: A device has a configuration problem that It prevents from functioning correctly. Details: The device, light WinpkFilter filter, report "tv_ConfigMgrErr24". This device won't be available before the question is resolved. The Plug and Play ID for this device is ROOT\LEGACY_NDISRD\0000. Resolution: 1. check that the correct driver is installed. 2. try updating the drivers using Windows Update. 3. check with the manufacturer for an update pilot. 4. try uninstalling and reinstalling the device by using Device Manager. Partners: Explanation of Error codes generated by Device Manager Manage devices in Windows

  I tried their update and uninstall the universal periodic publication of bus drivers. I don't know what to do about the other error. He also told me I need to more memory, but would not fix these errors.  If anyone can help I would really appreciate it!

  Manufacturer	BIOSTAR Group
  	Model	TA970
  	Total amount of system memory	8.00 GB OF RAM
  	Type of system	64-bit operating system
  	Number of processor carrots	4

  Type of view map NVIDIA GeForce GTX 750 Ti Total available graphics memory 5884 MB Dedicated graphics card memory 2048 MB Dedicated system memory 0 MB Shared system memory 3836 MB Graphics card driver Version 21.21.13.7270 Main monitor

  
  resolution 1920 x 1080 Version of DirectX DirectX

  Network card Realtek PCIe GBE Family Controller

  Thank you for coming back to us.

  It could be two or three reasons why you experience the problem regarding the World of Warcraft online game. Windows might need to install all important updates, there could be corrupted in the system, outdated driver files or the size of the memory.

  We suggest you to check and install all important Windows Update.

  If the problem persists you can update graphics cards via the Device Manager.

  • Press Windows key + R, type devmgmt.msc , and then click OK.
  • Double-click display adapters.
  • Double-click graphics card.
  • Click driver , and then select set to update driver.
  • You can select the following:
    • Automatically search for an updated driver.
    • Browse my computer for driver software.

  Let us know how it goes.

  Kind regards.

• Urgent: iPhone 5s boots up the white Apple logo screen, then finally turned his back on the wide...

  So, my 5s has problems with a few apps, so as I normally do, I turned the phone off and tried to turn it back on. (Phone is recharged btw, so not to die because of this)

  When I tried to turn it back on, the phone went to the start screen normal white with the logo of apple in this regard. He stayed there for 10 seconds, then the screen turns off. I continued to try to make it, but with the same result. Then I tried turning on the phone, press and hold the power and the "home" button to reset, but after resetting, it just does the same thing and turned off after having been on the screen of white boot for a few seconds.

  I followed some advice online to hold down home button after trying the reset, or press and hold the volume up button after resetting. Nothing works.

  I tried to do a variation of all the things mentioned above, when you are connected to a power outlet, did nothing.

  I tried to connect the phone to my computer with iTunes open. the phone turns on the start screen, as if acknowledging a power source, but the computer does not recognize the phone and so I can't do anything to reset the phone or do any recovery options mode... because the computer does not even recognize the phone.

  Any ideas? Apple chat will not work for some reason any. I need serious help. I have a week huge lead and need a phone. Impossible to find ideas on the internet, as mine connects to the computer and will not even appear a glimpse of life other than 10 seconds on the start screen.

  My phone got very buggy lately, by habit when you're updating to the latest version of iOS, and I think that's probably the culprit.

  NEVER interrupted or damaged my phone at all, perfectly working physically.

  Hello

  Turn off the iphone

  Make sure that your PC is running itunes 12.3.2

  Connect the USB to your PC wire

  Power button press and hold down on iphone connect to iphone power button pressed

  Until the PC sees iPhone.

  Wait for the restore, you may need to do more than once before it works.

  If you still have problems to make an appointment on apple store.

  See you soon

  Brian

• all paying games it flashes back on the desktop

  I have a laptop of hp 2000 new sound while I'm playing games in the middle of the game it switches back on the desktop, hp y at - it a way to stop this, its very frustrating.

  Ms. washington

  I'm sorry I don't know what specs? I don't know, it seems that something is behind the screen not really sure. the games I play are games of hp. Thanks for the reply.

• How to increase the scope of the Min for a tablespace?

  Hi all
  I exported a dmp file using command from a newer version of Oracle 10.2.0.3.0 expdp with the Version 10.2.0.1.0 = parameter (I should use it because of the Version of Oracle, I want to import to, if it is less than the export version which is 10.2.0.3.0 as I mentioned)
  and then imported it to Oracle version 10.2.0.1.0
  There is no problem with that, but I mentioned it to tell you what I did exactly!
  but when the command impdp finished working the log file tells me that some tables were not imported due to lack of space!
  some of the tables in the schema export had created using tablespace of users and others using a tablespace I created (which is given in error do not import tables into the import log file)
  To fix this, I have created a tablespace with the same name, and then create a user using it and then import the export for this user
  but the command line gives me an error about degrees Min I don't remember what it is, but could any disk space insufficient or something like!
  Now: How do I solve this problem? should I change the space Min scopes? If so, how?
  GOLD: what should I please!
  
  Thank you

  but the command line gives me an error about degrees Min I don't remember what it is, but could any disk space insufficient or something like!

  Normally, import failed because the question of space at the tablespace level when space is not enough to maintain the object (table) inside the tablespace.
  If you have logs you can paste the exact error msg.
  or see the file alert log of database during the time of importation for the error message.

  Now: How do I solve this problem? should I change the space Min scopes? If so, how?

  increase the size of the tablespace by adding or by resizing the data file.
  as
  alter tablespace TEST add datafile 'rental' size 1024 m;

• explain the values for IO tablespace statspack & file

  10.2.0.2 aix 5.2 64 bit
  
  in the section Tablespace IO Stats & Stats of e/s of statspack and awr reports file can someone help to clear up some confusion that I have with the value of AV readings/s-AV Rd (ms). I'll be referring to certain values, I have one of my reports, more than an hour 1 snap shot period, with the first three columns being readings, av rd/s, av rd (ms) respectively for the two sections.
  
  I have the following for the Tablespace IO.
  
  PRODGLDTAI
  466 879 130 3.9 1.0 8 443 2 0 0.0
  
  For the e/s file, I have the following for each file in the tablespace.
  
  PRODGLDTAI /jdb10/oradata/jde/b7333/prodgldtai04.dbf
  32 113 530 2.6 1.0 0 1 302 0 0.0
  PRODGLDTAI /jdb14/oradata/jde/b7333/prodgldtai03.dbf
  30 107 878 1.6 1.0 1 898 1 0 0.0
  PRODGLDTAI /jdb5/oradata/jde/b7333/prodgldtai01.dbf
  32 114 234 5.8 1.0 2 834 1 0 0.0
  PRODGLDTAI /jdb5/oradata/jde/b7333/prodgldtai02.dbf
  36 131 237 5.2 1.0 1 2 409 0 0.0
  
  From there I can calculate that there are on average 129.68 reads every second for the tablespace, and which corresponds to what is stated. But whence the rd (ms) av? If there are 1000 milliseconds in a second and there were 130 reads per second, which does not 7.6 ms by read?
  
  AV Dr (ms), what exactly? That's how many milliseconds it takes on average to 1 lira? I read in the doc Oracle Performance Tuning should not be greater than 20. What exactly is this statistic? In addition, we are currently looking at the purchase of a SAN and we were told that the value should not be greater than 10, which is just a matter of opinion? These values would be little useless on the tablespaces and data files that are not very active over a period of hours of time?
  
  Published by: PktAces on September 22, 2008 08:31

  I replied to this post a few days ago and so I have a watch on the post - but my response seems to have disappeared.

  Yes - "av rd (ms)" is the average time for a reading to be completed. Roughly speaking, it is "total time waiting for the read request" / "total number of read requests.

  20 m/s may be based on the programming of schedules for older hardware (disks 10 000 rpm). If a manufacturer tells you that the average response time for an e/s (for example) is 6 m/s - which equals 160 e / s per second - so it is reasonable to assume that in a multi-user system with a reasonable degree of simultaneity that perceived for a user response time will be about double. (Read Cary Millsap on the theory of queues and Oracle to understand why).

  So the 10 m/s is probably work around this figure of 6 m/s 2 x and enabling caching of the effects a bit. As a very rough indicator of 'it is unhealthy, if the average is more than 10', it's probably a good figure. But you can't be sure that the SAN is healthy if the figure is less than 10.

  It is difficult – without knocking a SAN with tablescans and it will madly in readahead and will produce data very quickly to a single user, while sanctioning other users who make random IO. In contrast, that a cache of SAN can do a lot of work to protect an Oracle of real disk readings because an object is just enough used to stay in the cache of SAN when it can't stay in the Oracle cache. If medium-sized SAN can be very misleading.

  When you enter the land of SAN, you must keep an eye on v$ event_histogram, v$ file_historam, v$ temp_histogram for a time gap of I/O as a better indicator of health.

  In fact, your last comment about "rarely used" objects is a useful indicator. If something is rarely used, Oracle "physical block read" is probably is a real disc read - an indicator of data how fast can detach from the SAN.

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  http://www.jlcomp.demon.co.UK

  "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge." Stephen Hawking.

• HP Pavilion dv6 3105tx: back behind the scenes for HP Pavilion dv6 3105tx

  Dear all,

  How can I buy a back box for my laptop? I m in Sri Lanka. can anyone suggest me a place in the region of the thing or a contact person.

  Thank you.

  Hey kingzmole,

  Please provide additional information. Try this part 604804-001.

  Please let me know.

• Can we use this product key on the back of the laptop for the activation and the windows 7 Professional 32-bit to windows 7 Professional 64-bit upgrade?

  I have a laptop HP originally shipped with windows 7 32-bit professional. Now I want to upgrade to windows 7 professional 64 bit. I don't have with me installation disk. So I thought that it is possible (and legal) to resume an installation of windows 7 professional 64 bit disc from a friend and use this product key on the back of my laptop computer to activate windows after the installation of 64-bit? I'm a bit confused.

  NOTE: This sticker on the laptop has windows 7 pro oa, and a product key to 25 digits (xxxxx-xxxxx-xxxxx-xxxxx-xxxxx) written on it.

  In addition, the product ID in the information system in the control panel is OEM.

  Yes, you can use the product key located on the COA sticker with a full retail version or the version upgrade Windows 7 Professional disc.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:
  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  See also:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• How can I solve this problem: ' Mail delivery failed: message back to the sender "for all recipients of my hotmail (outlook)

  Hello

  I get this email for all my "hotmail.com" recipients (outlook) when you try to send an e-mail to one of them that I had also for a front "msn.com" recipient:

  "This message was created automatically by mail delivery software.
  A message you sent could not be delivered to one or more of its
  beneficiaries. This is a permanent error. Failure of the following addresses:...
  host mx1.hotmail.com [65.55.37.72]
  Error SMTP from remote mail server after MAIL FROM: < [email protected] > SIZE = 8292:
  550 SC-001 (COL004-MC1F10) Unfortunately, the 198.1.119.134 messages have not been sent. As part of their network is on our list, please contact your Internet service provider. You can also consult your http://mail.live.com/mail/troubleshooting.aspx#errorsprovider. »

  Is there something I can do?

  Thank you very much for your help,

  Julie

  As more than first level help desk people, they are idiots! They are lucky to know enough to pick up the phone if it makes a noise.

  If their network or range of IP addresses is blacklisted only they can fix.
  I would ask to have this comeback for someone who knows something.

  It is not your problem, and there is nothing to fix on your computer.

• Back to the top for the camera in order to bypass the password

  Normally, a password is required for access to the iPad. But the password can be bypassed by simple swipe upward to the password screen. Looks like a major security problem.

  If you swipe up, the only thing you can do is access the camera. You can't access anything else on the device.

• How can I get back to the top for CRM Online?

  Original title: Save in crm online.

  How can I get up for CRM Online, do how long it take?

  Hi rosadesiderio,

  The question you posted would be better suited in the MSDN forum. I would recommend posting your query in the MSDN to support forum:

  http://msdn.Microsoft.com/en-us/Dynamics/CRM/bb456483.aspx

• Where is the correct redemption # on the back of the box for Adobe Photoshop elements 11 and Adobe Premiere

  I entered the number where it says scan to activate and it's too long.  All the other numbers on the box are not valid. What I'm doing.  I bought it at Staples.

  Post edited by: barbiedollstars999

  Hello

  There is Web site that you can check if it was bought on the education pricing then please use the link https://www.studentteacherlicensing.com/ and there is a small image given as an example.

  If the serial number does not appear here then you may need to contact Adobe support for your verification of educational documents and then you will get the serial number, please check the contact number http://helpx.adobe.com/contact.html here

  Ankit

• Flash back to the CCR

  Hello
  
  Did someone knows a way to allow the return of flame in a database of cars without removing user access to the database?
  
  Thank you

  I understand your database must be running in Archivelog mode and Flash recovery area must be configured. In an Oracle RAC installation, the flash recovery area must be stored in a file in cluster or ASM system. To set up the two, the database must be in montage mode, so the database closed to asure data integritiy.

  To see if the two are on:

  SQL > SELECT LOG_MODE, FLASHBACK_ON FROM V$ DATABASE;

• Changing data in the undo tablespace or db Oracle buffer cache

  Hello
  
  I have serious doubt in the feature of oracle architecture, when a user issues an update statement, the data blocks are transported to the db buffer cache and where the data changes are made? Made a copy data block is stored in the cache db pads and the changes are made to the block in the buffer cache? or the copy of the data block is stored in the undo tablespace and changes are made to the blocks in the undo tablespace?
  
  In singles, the changes to the data blocks are make to the db or undo tablespace buffer cache?
  
  
  Thanks in advance
  
  Kind regards
  007

  Did you have a look to the Internet for the answer?

  In short, if a trial Oracle wants to update a record in the table, it does:

  -Read the record to be changed in the buffercache
  -Audits (the record already locked, is the update allowed)
  -Put the folder (called image before) in a rollback in the UNDO tablespace segment
  -Writing redo information about this change in the UNDO tablespace
  -Lock the record
  -Write the change in registration in the buffer cache
  -Put the change also in the redo buffer
  S ' sit and wait... (for a commit or a rollback)

  When are committed:
  -Release the lock
  -Empty folder of restoration since the UNDO tablespace
  -Write a record of this change forward in the UNDO tablespace

  When rollback:
  -Release the lock
  -Rinse the record changed the buffercache
  -Read the original value
  -Empty folder of restoration since the UNDO tablespace
  -Write a record of this change forward in the UNDO tablespace

  It of here, some more specific complexity when a checkpoint occurs between the change and the commit / rollback or redo buffer has been emptied for redo files

  Please any other s/n, correct me if I'm wrong...

  See you soon
  FJFranken