Flash Builder 4 and CF9 - configuration

Similar Questions

• Flash Builder 4.7 Debug Configuration Bug

  I just updated today to Flash Builder 4.7 and came across an annoying bug that does not exist with 4.6. I always get many debug configurations when developing mobile applications, IE. iPhone, iPad, iOS on the device. When I tried to create these configurations this morning, I noticed that it doesn't let me have several configurations of AIR Simulator for various devices. When I change the device on one, it changes the device on the other, both of them doing exactly the same behavior. Everyone knows about this problem? Is there a way around it?

  There is a solution to this problem. To understand workaround, it will be good to understand a little better what is happening with the bug.

  As a result, the problem with this bug is not with the loading or saving of configurations, but rather with a switching between them. It seems that when switching between the two the same (for example, two configurations of Mobile Application), is not properly clear the form data, and because the form is not allowed to go out it does not correctly load the new information in and as such extends the old information. Since the recording of the code still works very well, when you exit it will record the messed up new configuration during the setup of old, good.

  So, technically, it is not the same configuration appears twice, but rather two different configurations which are set up the same because the form did not clearly get out when you switch between the two configurations.

  So now that we have a better understanding of the bug, here's workaround: If you click on something that uses a different form, it will destroy the shape. So for instance, if you have an iPhone 4 and an iPad Simulator Simulator and you have the iPad Simulator selected and you select the iPhone 4 Simulator, first simply click on the Mobile Application and then click on your iPhone 4 Simulator. When you do this all works very well.

  In addition, if you switch directly between the two, know that the configuration you just left is fine. It is only the one that you are currently looking that is messed up, and all you have to do is difficulty that you are looking for.

  So that at least we'll you work around the problem. It is also appropriate to establish just enough different configurations for where you never really need access the menu Debug Configurations. For example, I have two configurations set in place for each device or Simulator that I put in place, one who has the box 'Clear application to each launch data' verified and who does not. In addition, I have four simulators (iPad, iPhone, Android phone, Android Tablet) and one "on the device" installation (Android). Combining these gives me ten different configurations which covers the majority of what I do regularly and it does in so that I don't have need access Configurations Debug menu all that often.

  At this point with that many configurations it is also useful to organize all these configurations in the drop of debugging using the Organize favorites that can be selected in the drop-down list even.

  So, this made for a very long answer, but I hope that it will help you and help out some other people who also run in the same question. It does not change the fact that there is a really horrible bug and Adobe really needs to get on fixing it, but it can at least make sure it can be lived with.

• Flash Builder 4 and Eclipse WTP plug-in

  I need someone to help put me in the right direction as to how to configure the Eclipse WTP plug-in in Flash Builder 4. I have the plug-in downloaded on my desktop with 2 main folders (features and plug-ins) in there. At this point, I'm stuck on where to go from there to get WTP in, or work with Flash Builder 4. I run the standalone FB4. Someone help me please.

  Bliss

  The recommended way of getting to work with WTP FlashBuilder is using the site to update plugins grace-> to install a new software. Eclipse WTP plug-ins are deployed on a p2 Update site that is necessary for installation in FlashBuilder.

  An alternative is to copy the folder that contains the WTP plug-ins and features in FlashBuilder's "dropins" folder

• FlexUnit 4, Flash Builder 4 and Flex SDK 4

  I'm trying to create a project using these in combination. When I created my Tester under 4 SDK, it lacks everything trying to initialize the test. I decided to build FlexUnit 4 with 4 SDK, but it doesn't seem to find the mx namespace.

  Is there a version of FlexUnit 4 built for 4 SDk? If this isn't the case, are there some rules for the conversion of a project so it can be built under 4 SDK.

  I know that Flash Builder 4 will build FlexUnit and rune TuirnKey FlexUnit tests if I leave it with SDK 3.2, but I'm looking forward to learning and using SDK 4.

  They FlexUnit 4 library can e compiled under the Flex 3 and Flex 4 SDK, work too well either.

  The error you see actually is realted to the rider of the user interface. If you use in your project, you will not have a problem. (With Flex4 technically unnecessary one because the results can be reported by the plugin FlexUnit in Report Designer)

  If you don't want a UI 4 Flex, there is a prototype in SVN

  http://opensource.Adobe.com/svn/opensource/FlexUnit/branches/4.x/FlexUnit4UIRunnerSpark/

  However, I'm sure that there are several bugs because it has not been updated in a month or two, it was just a POC.

  Mike

• Flash Builder 4 and Adobe Application Manager

  I installed a trial version of Flash builder, but every time when I want to open/run it it gives me this error: "Adobe Application Manager is required to run this test, download Adobe Application Manager of www.dobe.com '... I searched for this download, but I can't. Can anyone please help, send me a link where I can download it, if I have to download to make it work.

  Try this (assuming you are using Win)

  -Download Fb Installer, locate the top-level folder containing set - up.exe

  -Now open the command prompt with ""run as Administrator " mode"

  -Go to the folder that contains the set - up.exe

  -Now, run the Set - up.exe - mode = 'silent' to repair Adobe Application Manager.

  If the problem persists, share newspapers %temp%/PDApp.log

• OSMF 2.0, Flash Builder 4 and Flex SDK 4.6 of compile errors

  So I have and you try to compile a new StrobeMediaPlayer.swf file of the StobeMediaPlayer.as and associated libraries.  I'm getting the following error when I perform an export-> Release Build:

  Met with errors or warnings during the generation of project StrobeMediaPlayback.as

  MulticastNetLoader.as: The definition of base class MulticastNetLoader is not found.

  MulticastNetLoader.as: Overide marked method must override another method.

  VideoInfoOverlay.as: Type was not found or was not a compilation constant: VideoSurface.

  VideoInfoOverlay.as: Access of undefined property OSMFSettings.

  VideoInfoOverlay.as: Access of undefined property VideoSurface.

  VideoInfoOverlay.as: Type was not found or was not a compilation constant: VideoSurfaceInfo.

  VideoInfoOverlay.as: Access of netGroup property possibly undefined via a reference with org.osmf .net: static type NetStreamLoadTrait.

  VideoInfoOverlay.as: Definition org.osmf.media.videoClasses:VideoSurface could not be found.

  VideoInfoOverlay.as: Definition org.osmf.media.videoClasses:VideoSurfaceInfo could not be found.

  VideoInfoOverlay.as: Definition org.osmf.utils:OSMFSettings could not be found.

  StrobeMediaPlayer.as: Access of undefined property isDVRRecording.

  If someone has encountered this.  I know that OSMF 2.0 was recently released.  I could go back to 1.6, but some ABR features are very attractive.

  Hello

  OSMF 2.0 has a CFC included in download to http://sourceforge.net/projects/osmf.adobe/files/OSMF%202.0%20Release%20%28final%20source% 2C%20ASDocs%2C%20pdf%20guides%20and%20release%20notes%29/OSMF.swc/download files - you can use it.

  Please also replace the OSMF1_6_FP10.swc - or do not use this old SWC.

  S.

• Burrito of flash builder design mode is a white screen and does not not all components

  Hey guys, for some reason none of my components appear any, when I go to design mode in flash builder burrito, and the screen is white. When I run the app, it works very well and seems very well my only problem is that I don't understand what is happening in "Design Mode". Someone has a similar problem to this, also, I don't get any errors about not being not able to load the design view just a pop-up that says that it takes a while to load and to continue or not. The only time I see a component is when I go to the source and highlight a component then go into design mode, then u see a blue outline of the component. You can see in my screenshot above. Any help would be great, thanks in advance.

  Thanks again,

  Brian

  Design mode does not work if you include qnx libraries in the path of the libraries due to a bug in FB, there is a flag to uncheck (qnx libraries) in the project to BBT properties

• Maximum activations exceeded CS6 Master Collection and Flash Builder Premium 4.7

  I have reinstalled my OS on my MacBook Pro without disabling my CS6 and Flash Builder programs and now I can't turn it back on. I have soap operas for the Master Collection 5.5 and 6, as well as Flash Builder Premium of 4.7. How can I get the old activations removed from my account?

  You need to contact Adobe support via chat and ask them to reset your activations

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Issue of Java and Flash Builder

  Hey all,.

  Is there anyway to import my Java classes to be used with Flash Builder 4 and if so how can I go to? I'm running using the Eclipse platform. Thanks in adavnce.

  Do you mean that you want to have your Java projects in your standalone Flash Builder workspace? You will need to install the JDT plugins in Flash Builder. I just wrote a post here http://blogs.adobe.com/jasonsj/2010/06/java_development_in_flash_builder_4_standalone.html.

  Jason San Jose

  Software engineer, Flash Builder

• Flex components do not work after the upgrade to Flash Builder 4

  I just bought Flash Builder 4 and imported my Flex Builder 3 project. Everything worked except my Flex components that have been created in Flash Professional using the Kit of Compoent Flex may not appear at all in my Flex application. The components have been created in Flash CS3 and published to a CFC. I even tried the upgrade to Flash Professional CS5 and publish again, but that did not help. These components work in Flex Builder 3 with Flex SDK 3.2. Anyone know why they do not appear in Flash Builder 4 with Flex SDK 4.1 and AIR 2.5 SDK? I need to work with AIR SDK 2.5 so I can compile for Android. Thank you, Ryan.

  P.S. when I say that they are not I mean that they are not visible in the currently running application. Flash Builder is find in the good SWC because I instantiate components in my mxml file and it compiles without error. -Ryan

  I downloaded the SWC and looked inside.  It is not related with Flex 4

  version of the FCC.  I think you need to check your configuration.  The CFC

  would have a substantially larger size once you get it right.

• Adobe Flash Builder 4.7 plugin utility does not install on Eclipse

  I try to install Flash Builder 4.7 Plugin in Eclipse. I downloaded Flash Builder Premium via Adobe Creative Cloud. I also installed Eclipse Indigo. I'm running this on Mac OSX.

  According to a tutorial, I found that I need to go to the Utilities folder in the Flash Builder, install and run the Adobe Flash Builder 4.7 plugin Utility. It seems to work very well. Afterwards, you should be able to see "Flash Builder" in the Help menu of Eclipse. However it is not. You should also be able to Flash Builder preferences under window-> Preferences. Flash Builder is also not visible here.

  According to the tutorial there are also this file ' fb-4_7-plugin - encoded.link ", created in the eclipse's" dropins"folder. This file is created. However, it is empty.

  I looked in the Setup log and it there was only a single message about.

  Move File: Destination: /Applications/eclipse/dropins/fb-4_7-plugin-encoded.link 
  Status: WARNING 
  Additional Notes: WARNING - There was a problem moving /Applications/eclipse/dropins/fb-4_7-plugin-encoded.link 
  

  I'm not sure what it means that the documentation seems to be quite rare. However, it seems to be the only problem in the whole installation process. Any ideas or suggestions on what could be causing this error would be great.

  Hey,.

  I actually solve this problem.  I forgot to come back and respond.  Hope this helps to Stefano.

  I went in dropins/fb-4_7-plugin - encoded.link and edited to say the following:

  path=C:/Program Files (x86)/Adobe/Adobe Flash Builder 4.7
  

• How can I really associate .as ActionScript with Flash Builder file in Windows 8?

  How can I really associate .as ActionScript with Flash Builder file in Windows 8?

  In Windows 7, you have to go to preferences - Flash Builder - File Associations, etc. There is no file Associations in the Windows 8 version: (see image)

  Adobe made a web page that indicates that you must use Windows Explorer to associate FlashBuilder.exe .as files, but it does not work: http://helpx.Adobe.com/Flash-Builder/KB/unable-set-default-file-associations.html

  FlashBuilder.exe does not support opening a file .as like that. Flash Builder attempts to launch a new process and requires a different workspace to be able to open a Windows file. So either Adobe should add support for binding to the Windows 8 file in Flash Builder, or it must be a setting that prevents the Flash Builder to open a second instance of process.

  

  I found a solution. I used a Windows 7 machine that is the file association appropriate and observed the key of Windows registry using regedit.exe. I exported the key and made a .reg file and copied on my machine Windows 8. After installing registry keys, the associated file did not immediately because Windows 8 has this key to the user choice that always associates the file .as with Flash Professional. So after installing the underside of the keys, then I used Windows Explorer to associate files with Flash Builder .as and my file associations work as expected. It is an Adobe specific integration problem that must be fixed on the end of Adobe to support file associations in Windows 8.

  Success as follows:

  (1) install the registry keys below

  (2) use the Windows Explorer to always associate FlashBuilder.exe .as files

  ========================================================================================

  copy the below into a file with the .reg extension. Then use the "Merge" command to Windows Explorer to install in the registry

  ========================================================================================

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\.as]

  @= "FlashBuilder.ActionScript".

  [HKEY_CLASSES_ROOT\.as\ShellNew]

  "NullFile"=""

  [HKEY_CLASSES_ROOT\FlashBuilder.ActionScript]

  [HKEY_CLASSES_ROOT\FlashBuilder.ActionScript\DefaultIcon]

  @= "C:\\Program Files\\Adobe\\Adobe Flash Builder 4.7 (64 Bit)\\eclipse\\plugins\\com.adobe.flexbuilder.ui_4.7.0.349722\\icons\\fb_as.ico.

  [HKEY_CLASSES_ROOT\FlashBuilder.ActionScript\Shell]

  [HKEY_CLASSES_ROOT\FlashBuilder.ActionScript\Shell\Open]

  [HKEY_CLASSES_ROOT\FlashBuilder.ActionScript\Shell\Open\Command]

  @= hex (2): 22, 43, 00, 00, 3 a, 00 5 c 00, 50, 00, 72, 00, 6f, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 20,.

  00,46,00,69,00 6 c 00, 65, 00, 73, 00, 5 c, 00, 41, 00, 64, 00, 6f, 00, 62, 00, 65, 00, 5 c, 00,------.

  41,00,64,00, 6f, 00, 62, 00, 65, 00, 20, 00, 46, 00, 6 c, 00, 61, 00, 73, 00, 68, 00, 20, 00, 42,------.

  00,75,00,69,00 6 c 00, 64, 00, 65, 00, 72, 00, 00, 20, 34, 00, 2nd, 00, 37, 00, 20, 00, 28, 00,------.

  36,00,34,00,20,00,42,00,69,00,74,00,29,00 5 C 00, 46, 00, 6 C, 00, 61, 00, 73, 00, 68,.

  00,42,00,75,00,69,00, 6 c, 00, 64, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 22, 00,------.

  20.00, 2d, 00, 6F, 00, 61, 00, 6 d, 00, 65, 00, 20, 00, 22, 00, 46, 00, 6 c, 00, 61, 00, 73, 00, 68,.

  00,20,00,42,00,75,00,69,00 6 c 00, 64, 00, 65, 00, 72, 00, 22, 00, 20, 00, 2d, 00, 2d, 00,------.

  6 c, 00, 61, 00, 75, 00, 6F, 00, 63, 00, 68, 00, 65, 00, 72, 00, 2nd, 00, 6f, 00, 00, 65, 70, 00, 6e,------.

  00,46,00,69,00 6 C 00, 65, 00, 20, 00, 22, 00, 25, 00, 31, 00, 22, 00, 00, 00

  [HKEY_LOCAL_MACHINE\SOFTWARE\.as]

  @= "FlashBuilder.ActionScript".

  [HKEY_LOCAL_MACHINE\SOFTWARE\.as\ShellNew]

  "NullFile"=""

  [HKEY_LOCAL_MACHINE\SOFTWARE\FlashBuilder.ActionScript]

  [HKEY_LOCAL_MACHINE\SOFTWARE\FlashBuilder.ActionScript\DefaultIcon]

  @= "C:\\Program Files\\Adobe\\Adobe Flash Builder 4.7 (64 Bit)\\eclipse\\plugins\\com.adobe.flexbuilder.ui_4.7.0.349722\\icons\\fb_as.ico.

  [HKEY_LOCAL_MACHINE\SOFTWARE\FlashBuilder.ActionScript\Shell]

  [HKEY_LOCAL_MACHINE\SOFTWARE\FlashBuilder.ActionScript\Shell\Open]

  [HKEY_LOCAL_MACHINE\SOFTWARE\FlashBuilder.ActionScript\Shell\Open\Command]

  @= hex (2): 22, 43, 00, 00, 3 a, 00 5 c 00, 50, 00, 72, 00, 6f, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 20,.

  00,46,00,69,00 6 c 00, 65, 00, 73, 00, 5 c, 00, 41, 00, 64, 00, 6f, 00, 62, 00, 65, 00, 5 c, 00,------.

  41,00,64,00, 6f, 00, 62, 00, 65, 00, 20, 00, 46, 00, 6 c, 00, 61, 00, 73, 00, 68, 00, 20, 00, 42,------.

  00,75,00,69,00 6 c 00, 64, 00, 65, 00, 72, 00, 00, 20, 34, 00, 2nd, 00, 37, 00, 20, 00, 28, 00,------.

  36,00,34,00,20,00,42,00,69,00,74,00,29,00 5 C 00, 46, 00, 6 C, 00, 61, 00, 73, 00, 68,.

  00,42,00,75,00,69,00, 6 c, 00, 64, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 22, 00,------.

  20.00, 2d, 00, 6F, 00, 61, 00, 6 d, 00, 65, 00, 20, 00, 22, 00, 46, 00, 6 c, 00, 61, 00, 73, 00, 68,.

  00,20,00,42,00,75,00,69,00 6 c 00, 64, 00, 65, 00, 72, 00, 22, 00, 20, 00, 2d, 00, 2d, 00,------.

  6 c, 00, 61, 00, 75, 00, 6F, 00, 63, 00, 68, 00, 65, 00, 72, 00, 2nd, 00, 6f, 00, 00, 65, 70, 00, 6e,------.

  00,46,00,69,00 6 C 00, 65, 00, 20, 00, 22, 00, 25, 00, 31, 00, 22, 00, 00, 00

• Flash builder 4.7 for students

  I am currently using Flash Builder 4.6 standard with student permit. Is there one for Flash Builder 4.7? The usual student license Web site http://freeriatools.adobe.com/ is down so I can't get any information.

  Thank you.

  Please see the following statement:

  Statement:

  The program to offer free copies of Flash Builder Standard to the students, faculty and staff is removed.  You can subscribe to a free subscription to the cloud of Creative Adobe to access Adobe Scout, a new profiling and optimization of Flash and AIR content tool;  Kit SDK of Adobe Gaming, a collection comprehensive frameworks and examples of code;  Flash compiler C++, games C/C++ cross-compilation to run your game in Flash Player; 2 GB of file storage;  and versions of Flash Builder trial and other Adobe tools.  More on: http://gaming.adobe.com/getstarted/

  Question:   Why this program was discontinued?

  Response:   This program was created to encourage the use of Flash Builder for the construction of the RIA (rich internet applications).   Since Adobe is no longer the Flash Builder for RIA development, this program is obsolete.

  Question: I build games so why Adobe can¹t provide these tools to the students, faculty and staff for game development?

  Response: Adobe recently announced a new set of tools available for free through the cloud of Adobe Creative game development.  Game development tools Adobe includes Scout from Adobe, Adobe Gaming SDK, Flash the c++, 2 GB of file storage and access to versions of Flash Builder trial and other Adobe tools.

• Destroy... What would cause a Flash Builder crashing repeatedly on the same. MXML file?

  Hello

  I'm building a pretty simple application and I changed something in a .mxml file pretty simple and all of a sudden whenever I open the file for editing, Flash Builder crashes and dies horribly.

  If I have all the code in comment and reopen Flash Builder, I can open and edit the file correctly. I can even put all the original in the code and test the application successfully.

  But...

  When I put all the code back in and then go back to edit the file, Flash Builder exterminates in a sort of permanent and irrevocable while I comment on all the code to make it work again...

  I tried to export, delete, import to reset the project, but the problem is recurring.

  Then...

  It is clear that I wrote something in my .mxml file that sends Flash Builder in an infinite loop of godawful or another dead end, but I'm at a loss to say what, as it is very MXML very base and direct without (far as I can tell) something unusual... and I've been professional programming with Flex for a number of years and built some _big_ Meanwhile applications...

  If someone has experienced something similar? Any ideas what I could do?

  Thank you

  G

  Found the little git.

  Somehow, I had marked "Enable design mode" and the designer was attempting to make a wide range of custom controls that she had no idea what to do with.

  I think, I _may_ have tried the design mode for about five minutes about five years ago and decided it wasn't for me... If so, this opinion still stands.

  I have "Enable design mode" Unflagged and suddenly everything plays well again.

  G

• I have some difficulties to export a mobile application with Android Adobe Flash Builder Burrito

  Hi, eveybody.

  I do a simple mobile application with Adobe Flash Builder Burrito, and it works well on windows.

  Then, I want to export it as a .apk and install on the android emulator. But I failed. I have received a few messages as follows:

  E:\android\a\android-SDK-windows\platform-tools > ADB install Twitter.apk
  594 KB/s (875316 bytes in s 1.437)
  pkg: /data/local/tmp/Twitter.apk
  Failure [INSTALL_FAILED_INVALID_APK]

  Then I download AdobeAIRSDK2.6, unzip and copy the files in the sdk (D:\Program Adobe Adobe Flash Builder Burrito\sdks\4.5.0).

  "I change < application xmlns =http://ns.adobe.com/air/application/2.5> to < application xmlns ="http://ns.adobe.com/air/application/2.6">."

  Then he can't export it as a .apk...

  Thank you!

  Are you using the pre-release version of Burrito which was released to the MAX?  If so, I doubt that will support 2.6.  You can apply for the pre-release program get the latest versions.