Flash Builder - launch failed

Similar Questions

• Cannot install Flash Builder 4; Failed to retrieve the latest versions

  I am Windows 7 64 bit on a network where my Documents and my office are related to a roaming profile are applied where the quotas for the use of space. I was unable to install Flash Builder 4 because of this issue, which Adobe is known and apparently corrected (thanks, Chris A.).

  However, I can't even extract Burrito or the FB4.5 draft because the installation exe retrieved automatically on the desktop. Under 4.0, I could change the extraction location.

  Is there a way around this problem?

  Thank you

  Ron

  @Ron - Thanks for letting us know. I'm surprised that anyone encountered this limitation before today.

  Fortunately, there is a solution:

  -Open a command window and cd to the location of the downloaded self-extracting exe file

  -Run the exe with the/d (destination) option, which allows you to adapt the path where the installation program is extracted.

  In my case, the chain of syntax full looked this way:

  FlashBuilder_4_5_LS10.exe /d c:\customExtractionFolder

  -Chris

• Flash Builder - Exit Code: 6-0 fatal Error (s), 6 (s), 4 warning (s)

  Hello

  I can't install Flash Builder or catalyst. They're both part of CS5.

  I had a look at the forum and tried a few things

  · Run as administrator or re-installed Flash Builder and catalyst

  · restarted the computer in a State downplayed, did a scan of the system etc.

  These two methods have not worked for me and I get the same message:

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 6 (s), 4 warning (s)

  WARNING: WARNING: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, because of update patch ITS and a payload of high level is being installed.

  WARNING: WARNING: {68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X 64 will not be repaired, because of ITS update patch and a payload of high level is being installed.

  WARNING: WARNING: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, because of update patch ITS and a payload of high level is being installed.

  WARNING: WARNING: {68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X 64 will not be repaired, because of ITS update patch and a payload of high level is being installed.

  ERROR: A Custom Action for payload {177E1CA1-14CC-4398-AB15-A5746EFE8F22} Adobe Flash Builder returned the error. Failure to comply with this payload.

  ERROR: A Custom Action for payload {E8815668-95B0-443D-AC92-2BFD7DD8F16A} Adobe Flash Catalyst CS5 returned the error. Failure to comply with this payload.

  ERROR: The following payload errors were found during the installation:

  ERROR: -Adobe Flash Builder: installation failed

  ERROR: -Adobe Flash Player ActiveX 10: installation failed

  ERROR: -Adobe Flash Catalyst CS5: installation failed

  -------------------------------------------------------------------------------------

  I am running Windows 7, x 64 (Home premium) with memory of 8 GB and a terabyte of hard drive.

  I'm new to all this, I must admit for any help or advice would be greatly appreciated.

  Cheers J

  By looking at the log you have sent (under separate cover), it seems that your user name contains an ampersand - &.

  I think it is one of the characters that java does not properly handle in railways, reported in the error. Here's a way you can test this theory:

  -connect as another user with a user only alphanumeric name, preferably one with Admin rights machine

  -install FB under this user and see if it succeeds.

  If so, then you can return to your privileged user account and run there instead. In this case, you probably want to change path workspace default FB to a custom path that is not under your home folder of the user, in order to avoid other problems with this sign in the path.

  -Chris

• Flash Builder 4 of installation failure

  Can't install Flah Builder, bad start...

  Here the message, there is no log to files C:Common, no idea?

  Exit code: 7

  
  -------------------------------------- Summary --------------------------------------

  
  -0 fatal Error (s), 16 (s), 14 warning (s)

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ERROR: The following payload errors were found during the installation:

  
  ERROR:-Microsoft_VC90_ATL_x86: installation failed

  
  ERROR:-Microsoft_VC90_CRT_x86: installation failed

  
  ERROR:-Microsoft_VC80_ATL_x86: installation failed

  
  ERROR:-Adobe Flash Builder: installation failed

  
  ERROR:-Adobe Player for Embedding: installation failed

  
  ERROR:-Suite Shared Configuration CS5: installation failed

  
  ERROR:-AdobeHelp: installation failed

  
  ERROR:-Adobe Flash Player ActiveX 10: installation failed

  
  ERROR:-Microsoft_VC90_MFC_x86: installation failed

  
  ERROR:-AdobeTypeSupport CS5: installation failed

  
  ERROR:-Microsoft_VC80_CRT_x86: installation failed

  
  ERROR:-AdobeCMaps CS5: installation failed

  
  ERROR:-Microsoft_VC80_MFC_x86: installation failed

  
  ERROR:-Microsoft_VC80_MFCLOC_x86: installation failed

  
  ERROR:-Adobe Flash Player 10 Plugin: installation failed

  
  -------------------------------------------------------------------------------------

  You run Setup with the "Run As Administrator"?

  Jason San Jose

  Software engineer, Flash Builder

• Failed to launch! ApolloLaunchDelegate.fileDoesNotExist! in Flash Builder when debugging AIR applications

  Hello world

  I use flash/flex builder for years, but have never tried to create an AIR application before.  I tried to create a 'Hello' world app before wearing some of my stuff by following the instructions here:

  http://help.Adobe.com/en_US/air/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118676a28bd-8000. HTML

  "but when I try to debug the code, I get the a dialog box"Unable to launch"with the useless comment! ApolloLaunchDelegate.fileDoesNotExist!'.

  I'm running win7x64, SDK 4.1

  I tried all kinds of different files in the AIR, including the value by default when you create an empty project and the conversion of copies of some of my existing flex projects on the desktop, but they all give the same message.

  Google does not help.  Any ideas would be welcome.

  Kenneth

  EDIT: just tried the same thing on my same version of flash builder on my laptop and it works... The laptop working Vistax64.  The only other different is that when I chose SDK 4.1 in the new project dialog box, he said, AIR 2.0, while on this machine, say, he needed air 1.5

  Post edited by: kennethGilpin

  Hello

  You can check whether a SWF file has been generated in your bin-debug folder? Looking at the code FB, this happens when the SWF file does not exist. (Although I don't know why the error message is incorrect for you. Did pass you to FB 4 to 4.0.1 or are you on an own 4.0.1 install?)

  Try to check your view of 'Problems' to see if there are any compiler errors.

  Thank you

  Rémy

• Export Flash Builder project FXP failed

  I upgraded from Flash Builder 4.5 to 4.5.1.  When I went to import my projects I was warned that the workspace was created in an earlier version of FB and what should I migrate a new 4.5.1 project workspace.  Instructions are here:

  http://kb2.Adobe.com/CPS/899/cpsid_89996.html

  Step 1, "Export the project as an FXP file" fails.  Dialog box looks like:

  

  No further details.

  It does this whether or not "Validate project Compilation" is selected.

  So I shouldn't have launched projects in the workspace in the new version of FB, and I can't migrate projects to a new workspace in the new FB.  How to win here?  Errors do not appear anywhere?  That correct?

  Thank you

  You can send the error log (.log files), you can find in the .metadata folder in your workspace directory.

  Although the preferred method exports, as a solution, you can try to copy the projects from this workspace directory to the new directory of the workspace.

  Thank you

  -Sunil

• Ripple Build: [ERROR] Failed to run launching java.exe.

  Hello BB community

  I have a problem with the Chrome Ripple 0.9.8 extension I could not find such an error in google.

  When I click on the build, it shows error:

  Oh, Snap! Build request failed with the message: [ERROR] failed to run java.exe launch.

  and create the file .zip in the output folder

  I have Java 6, 7 and 7 installed SDK

  The problem was that I moved manually SDK Webworks directory to another location.
  the solution is to change the path to the bbwp.properties file in:
  C:\...\BlackBerry SDK software WebWorks for Tablet 2.2.0.5\bbwp\bin

• Flash Builder 4.6 do not launch

  Just found out that Flash Builder 4.6 and 4.5 do not run. Flash Builder 4 is. Download the logo popping up, but nothing of loading. I would uninstall other versions, but I get an error when I go to my program settings and click on my package of CS.

  Any suggestions?

  UPDATE: I contacted Adobe yesterday and they had me do something that I thought not.

  Launch MSCONFIG

  On the Services tab click Hide all Microsoft services.

  Click on disable all buttons

  Restart your system

  Run Flash Builder (it has now begun)

  I closed Flash Builder and reentered MSCONFIG

  Uncheck Hide all Microsoft (if active) services

  Click activate all buttons

  Restart your computer

  Flash Builder still worked after that. Now, everything is good.

• Update Flash Builder 4.5 Application SDK 2.6 automatic fails

  I developed some applications using Flex Builder 3 and have recently started using the Flash Builder 4.5 for my air applications-applications development. ApplicationUpdaterUI worked well in FB3, but now, in FB4.5, it fails with:

  [StatusUpdateErrorEvent (type = text = updateError updated unknown descriptor namespace id = 16815 + subErrorID = 0)]

  My reading of Application descriptor:

  < application xmlns="""http://ns.adobe.com/air/application/2.6""">

  
  

  So I changed my update descriptor in my Update.xml on server 1.0 (for FB3) to 2.6 as thus:

  " < day xmlns =" http://ns.Adobe.com/air/framework/update/description/2.6 ">

  It gives me the above error...

  If I change the descriptor of the update to 2.5 as thus:

  " < day xmlns =" http://ns.Adobe.com/air/framework/update/description/2.5 ">

  I get the following error:

  [StatusUpdateErrorEvent (type = text updateError = Application names and names of update descriptor are not compatible id = 16831 + subErrorID = 0)]

  I read in several forums that you need to switch the updater return descriptor 2.5 or even return to 1.0. I tried both of them, and it still does not work! Here is my update code. I just put this component flex on the status of my application is started. I think it's all is OK, but please fill me in if I am wrong...

  <? XML version = "1.0" encoding = "utf-8"? >

  < s:Group ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  " xmlns:s = 'library://ns.adobe.com/flex/spark"" "

  "" = xmlns:mx 'library://ns.adobe.com/flex/mx"width ="400"height ="32"" "

  creationComplete = "checkForUpdate ()"> "

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  import air.update.ApplicationUpdaterUI;

  import air.update.events.StatusUpdateErrorEvent;

  import air.update.events.UpdateEvent;

  import flash.events.ErrorEvent;

  import mx.controls.Alert;

  private var appUpdater:ApplicationUpdaterUI = new ApplicationUpdaterUI();

  private checkForUpdate() function :void{}

  appUpdater.updateURL = " ""http://test.example.com/root/updates/update.xml"""

  appUpdater.isCheckForUpdateVisible = false;

  appUpdater.addEventListener (UpdateEvent.INITIALIZED, onUpdate);

  appUpdater.addEventListener (ErrorEvent.ERROR, onError);

  appUpdater. addEventListener (StatusUpdateErrorEvent.UPDATE_ERROR, onUpdateError);

  appUpdater.initialize ();

  }

  private function onError(event:ErrorEvent):void{}

  Alert.show (event.toString ());

  }

  private function onUpdate(event:UpdateEvent):void{}

  appUpdater.checkNow ();

  }

  private function onUpdateError(event:ErrorEvent):void{}

  Alert.show (event.toString ());

  }

  ]]>

  < / fx:Script >

  < / s:Group >

  And here's my update.xml...

  <? XML version="1.0" encoding="utf-8"?>

  < Update xmlns="""http://ns.adobe.com/air/framework/update/description/2.5""">

  < >version1.0.1< /version>

  < url > http:// test.example.com/root/updates/Application_1.0.1.air< /url>

  Description <> <! [CDATA [ ]]

  1.0.1 (20/07/2011)

  Test code update

  [[ ]] > < /> description

  < /update>

  
  

  Help, please!

  You must use

• Flash builder 4 check load useful integerity: failed with code 1

  where to install flash builder 4 on windows 2003 32 x servers

  had this error

  ------------------------------------------------------------------------------------------

  Exit code: 7

  
  -------------------------------------- Summary --------------------------------------

  
  -0 fatal Error (s), 2 error (s), 2 warning (s)

  
  ATTENTION: Payload {7E5AA19B-0B85-4f44-BA26-728851489200} Adobe Flash Player 10 ActiveX is already installed and the payload of the session {5EE868D6-7B6B-49ee-AF60-09B1358AFFD7} Adobe Flash Player 10 ActiveX has no relationship between/conflict with it.

  
  ATTENTION: Payload {40F95A03-885A-45fb-9A14-486BEFEDDF34} Adobe Flash Player 10 Plugin is already installed and load the session useful {FB7F30B6-BFBF-4d2c-9F61-B5533659ACBE} Adobe Flash Player 10 Plugin has no relationship between/conflict with it.

  
  ERROR: Check the payload integerity: failed with code 1

  
  ERROR: Could not get the root of inChildPath
  ------------------------------------------------------------------------------------------ ------------

  who can help me, I will thank you very much

  Hello

  Please, deselect the option of Flash Player in Setup before you begin the installation and see if the installation is successful. (Please uninstall Flash Builder and restart the computer before trying to reinstall)

  If this does not help, please run the cleaning of CS5 with option to uninstall Flash player and FB, restart after having cleaned and now reinstall FB (selection also the Flash Player)

  CS5 tool can be downloaded from http://www.adobe.com/support/contact/cs5clean.html

  Please let us know if this helps you.

  Thank you

  Deeptika

• Installation of Flash builder 4 has somehow broken my launch of running/debugging/profiling of flex builder 3.

  After installing Flash builder 4 neither to him nor to flex builder 3 has been able to launch flex swf:s. After hitting to run or debug flex gives a prompt saying "Flash Player is not found. Flex builder cannot locate the required version of Flash Player. You need to maybe install Flash Player 9 or reinstall Flex Builder. Do you want to try to run your application with the current version? ». The popup itself happened before the installation of flash builder 4. But normally I would hit just Yes and he would use any flashplayer is default.

  Now, if I click Yes it launch command prompt with a path to the installation folder of flex 3 Builder. When running flash builder 4, same happens except the path is the folder of installation of flash builder 4. Flex then begins waiting for connection of the debugger, and after awhile, he invites a timeout message. The title of command prompts is... \workspace\project\bin-debug\filename.swf.

  When you open the SWFs directly from windows, they open fine.

  I used the uninstaller for flash player software and recovered both fp9 & 10 and reinstalled the. That did not help. When we browser everything works fine, the problem occurs only when you launch standalone player. I tried to check the registry settings if there is something wrong, but all the flashplayers paths seem to be ok.

  Is there another hope to solve this problem than to reinstall flex builder 3 and flash builder 4 from scratch?

  You need content installed FP debugger

  http://www.Adobe.com/support/flashplayer/downloads.html download from here and install it and you should see the problem go away

  Download the Flash Player 10 ActiveX Windows control content debugger (for IE) (EXE, 2.03 MB)

• error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

  Hello

  I get this error when you try to run the sample of cards on the corrugation Simulator:

  Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

  The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

  Someone else have this error and know why?

  PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

  PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

  Thank you

  The two directories (in the extensions directory and maps project directory) have permissions to 777.

  But you gave me an idea...

  It turns out that simply by putting

  "Packages".

  in setting output wasn't enough, I need the full path

  for example: "/ Users/username/RippleSites/Maps/packed."

  and presto, now it works!

  Thank you!

• Extension for CS 5, 6 and versions CC in Flash Builder 4.6 fails to initialize

  Hi all

  I develop an extension for Illustrator CS5, 6 and CC versions. I use the versions of Flash Builder 4.6 and Extension Builder 2.1. When I create a new project and add a minimal support for CS5, I am unable to view the design of the project resulting. I don't understand why. If I add a minimal help for CS6, design mode works very well. What is behavior?

  Also, I expect to use datagrid spark in my extension, it supports smooth scrolling. I'm not able to do the same, as the extension never initializes.

  Here's the screeshot of the compiler settings:

  

  And here's what I get the error:

  

  What can I do to make my work?

  Hello

  Unfortunately, the Design view is completely unusable with the Extension Builder 3.4 needed to create a CS5 extension... So, you will see a black screen instead of your user interface. The only solution is to write your code and test. Previous versions of Extension Builder working on a previous version of Flash Builder and Design mode worked as expected...

  Best,

  Luca

• Flash builder 4.6 or 4.5 launch in mountain lion

  Does anyone have any ideas on when they come to the top with an update? I really need to use Flash Builder, and I can't. Thank you.

  I had no trouble 4.6 or 4.7 beta running on Mt. Lion. Do you have

  installed Java yet?

  iBrent

• Flash Builder fails to compile

  I'm trying to bug a project and using a lot of tracing instructions. To debug the file in a browser (Firefox) often don't re - compile with the result that the latest tracing statements are ignored. I tried my recent history of compensation, but it does not help. I use Flash Builder 4.6 on a Mac. Can anyone suggest a solution?

  Project-> Clean does the trick?