Flash Builder stops send me errors of compilation or warnings

Similar Questions

• Tecra S5 - 14R: Toshiba Flash Cards stops working: Runtime Error R6025

  Hi all.

  Material: Toshiba Tecra S5 - 14R
  I have a problem with the software Toshiba Flash Cards.
  When it starts I received a "R6025 - pure virtual function call" error, and then microsoft alert that Toshiba Flash Cards software stopped working

  I use Windows Vista Business 32 bit OS and I downloaded the new version of the software Toshiba Flash Cards (v.2.00.05), but this does not solve the problem.

  If someone could help?

  Hello

  It seems that this error is known for support of Microsoft people, and so they have published an article in the knowledge base.
  This error is also displayed if you run the Microsoft Money software.

  Please, try the steps outlined here:
  [Runtime error: "R6025-virtual function call Pure" | ""] http://support.Microsoft.com/kb/240437]

  I would recommend this as:

  1. disable Flash cards
  2. Click Start, type cmd in the search box and press ENTER.
  3. at the command prompt, type the following lines one at a time and then press ENTER after each line:
  -regsvr32 softpub.dll
  -regsvr32 wintrust.dll
  -regsvr32 initpki.dll
  -regsvr32 dssenh.dll
  -regsvr32 rsaenh.dll
  -regsvr32 cryptdlg.dll
  -regsvr32 gpkcsp.dll
  -regsvr32 sccbase.dll
  -regsvr32 slbcsp.dll

  4. again turn on the Flash Card Utility

• Flash Builder - Exit Code: 6-0 fatal Error (s), 6 (s), 4 warning (s)

  Hello

  I can't install Flash Builder or catalyst. They're both part of CS5.

  I had a look at the forum and tried a few things

  · Run as administrator or re-installed Flash Builder and catalyst

  · restarted the computer in a State downplayed, did a scan of the system etc.

  These two methods have not worked for me and I get the same message:

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 6 (s), 4 warning (s)

  WARNING: WARNING: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, because of update patch ITS and a payload of high level is being installed.

  WARNING: WARNING: {68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X 64 will not be repaired, because of ITS update patch and a payload of high level is being installed.

  WARNING: WARNING: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, because of update patch ITS and a payload of high level is being installed.

  WARNING: WARNING: {68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X 64 will not be repaired, because of ITS update patch and a payload of high level is being installed.

  ERROR: A Custom Action for payload {177E1CA1-14CC-4398-AB15-A5746EFE8F22} Adobe Flash Builder returned the error. Failure to comply with this payload.

  ERROR: A Custom Action for payload {E8815668-95B0-443D-AC92-2BFD7DD8F16A} Adobe Flash Catalyst CS5 returned the error. Failure to comply with this payload.

  ERROR: The following payload errors were found during the installation:

  ERROR: -Adobe Flash Builder: installation failed

  ERROR: -Adobe Flash Player ActiveX 10: installation failed

  ERROR: -Adobe Flash Catalyst CS5: installation failed

  -------------------------------------------------------------------------------------

  I am running Windows 7, x 64 (Home premium) with memory of 8 GB and a terabyte of hard drive.

  I'm new to all this, I must admit for any help or advice would be greatly appreciated.

  Cheers J

  By looking at the log you have sent (under separate cover), it seems that your user name contains an ampersand - &.

  I think it is one of the characters that java does not properly handle in railways, reported in the error. Here's a way you can test this theory:

  -connect as another user with a user only alphanumeric name, preferably one with Admin rights machine

  -install FB under this user and see if it succeeds.

  If so, then you can return to your privileged user account and run there instead. In this case, you probably want to change path workspace default FB to a custom path that is not under your home folder of the user, in order to avoid other problems with this sign in the path.

  -Chris

• issues running app with Flash builder 4

  Hi all

  I recently started having issues running in Flash builder.  Projects that had no problem running are now sent me errors as follows:

  1046: type was not found or is not a constant of compilation: Array.

  1046: type was not found or is not a constant of compilation: Boolean.

  1046: type was not found or is not a constant of compilation: function.

  1046: type was not found or is not a compilation constant: int.

  etc...

  If I close Flash builder and re - open, I am able to run the project again, but the problem will come back later.  Even the FullRSSReader sample project has this problem.

  Any suggestions?

  Zymatic

  Hey,.

  This type of problem has bought about a month ago or not. Basically, if you use the QNXStageWebView class in your application it cause all these mistakes, you said. they are not real mistakes just flash builder think there are errors - a bit like a false positive. We propped it up like a bug related to the QNXStageWebView, because it is undocumented and has already been mentioned as really bug.

  Here is a link to the previous thread:

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-Air/possible-bug-repeate-re-building-...

  Also of note, if you go to project > Clean it will clear up all the mistakes albit temporarily. I hope this helps. Good luck!

• Flash Builder 4.6 for PHP and SDK 2 questions

  I have problems with Flash Builder for PHP 4.6 and the Playbook Air SDK 2.0. It worked fine with the Air SDK 1 Playbook, but for 2.0 he moved not (error integration with Flash Builder) and when I try to update in Flash builder I get an error of missing requirements. Flash builder 4.6 works fine with the PlayBook SDK, but not the PHP version. I bought the PHP version after the end of my trial of 4.6 so I could build an app that tied in the server services and to think that both versions are the same.

  Everyone knows this and is at - it a solution?

  Thanks in advance.

  Hello

  Flash Builder for PHP 4.6 is not supported by the BlackBerry Tablet OS SDK for Adobe AIR. Sorry for the inconvenience this has caused.

  Dustin

• Flash Builder cannot locate the required Adobe Flash player debug version

  Hello

  The problem seems to be well known for the last few years and older versions of Flash builder, but I feel that it is still not resolved for Win 7 64 bit, Flash Builder 4.5.

  I have installed:

  -Flash Builder 4.5

  -windows 7, 64 bit

  -The most recent Flash Player - 11.3.r300.257

  Please, let me know how to properly use debugger in Flash Builder 4.5 without error message below:

  "Flash Builder cannot locate the required Adobe Flash player debug version. You need to maybe install the debug version of Flash Player or reinstall Flash Builder"

  SebaR

  This is a known bug in Flash Builder 4.5 and 4.6.

  It will be fixed in the next version of Flash Builder.

  The workaround for Flash Builder 4.5 and 4.6 is to download the two 32-bit & 64-bit debug player.

• Flash Builder 4 of installation failure

  Can't install Flah Builder, bad start...

  Here the message, there is no log to files C:Common, no idea?

  Exit code: 7

  
  -------------------------------------- Summary --------------------------------------

  
  -0 fatal Error (s), 16 (s), 14 warning (s)

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  
  ERROR: The following payload errors were found during the installation:

  
  ERROR:-Microsoft_VC90_ATL_x86: installation failed

  
  ERROR:-Microsoft_VC90_CRT_x86: installation failed

  
  ERROR:-Microsoft_VC80_ATL_x86: installation failed

  
  ERROR:-Adobe Flash Builder: installation failed

  
  ERROR:-Adobe Player for Embedding: installation failed

  
  ERROR:-Suite Shared Configuration CS5: installation failed

  
  ERROR:-AdobeHelp: installation failed

  
  ERROR:-Adobe Flash Player ActiveX 10: installation failed

  
  ERROR:-Microsoft_VC90_MFC_x86: installation failed

  
  ERROR:-AdobeTypeSupport CS5: installation failed

  
  ERROR:-Microsoft_VC80_CRT_x86: installation failed

  
  ERROR:-AdobeCMaps CS5: installation failed

  
  ERROR:-Microsoft_VC80_MFC_x86: installation failed

  
  ERROR:-Microsoft_VC80_MFCLOC_x86: installation failed

  
  ERROR:-Adobe Flash Player 10 Plugin: installation failed

  
  -------------------------------------------------------------------------------------

  You run Setup with the "Run As Administrator"?

  Jason San Jose

  Software engineer, Flash Builder

• App integrated with Flash Builder 4.6 and compiled for iOS, error now when loading to the appstore

  I built a simple application using Flash Builder 4.6 and have successfully deployed to the Android Market (after testing on my own Android device).  I also took this same application and compiled for iOS and tested on my iPad.

  I then did the Release with the final 'Release for App Store Distribution' option in the release generation Wizard.  I have all the certificates supply correct in place and compiled the application in a .ipa file.

  At this point, you use a MAC, I ran the Application Loader utility to upload my app to itunesConnect portal to get it in the appstore.  I already went through the steps to enter metadata, pricing, and screenshots in itunes connect portal and just need to download it for review.

  When I download the .ipa file into the application loader, it gives me the following error:

  "iPhone/iPod Touch: contains executables of the application not supported architectures: arm.

  Anyone have any idea what this means and how I can fix this?  Any help is greatly appreciated!

  Thanks in advance!

  He solved.  Just add the following text in the tag for iPhone in my app descriptor XML file:

  UIRequiredDeviceCapabilities

  WiFi

  ARMv6

  ARMv7

• OSMF 2.0, Flash Builder 4 and Flex SDK 4.6 of compile errors

  So I have and you try to compile a new StrobeMediaPlayer.swf file of the StobeMediaPlayer.as and associated libraries.  I'm getting the following error when I perform an export-> Release Build:

  Met with errors or warnings during the generation of project StrobeMediaPlayback.as

  MulticastNetLoader.as: The definition of base class MulticastNetLoader is not found.

  MulticastNetLoader.as: Overide marked method must override another method.

  VideoInfoOverlay.as: Type was not found or was not a compilation constant: VideoSurface.

  VideoInfoOverlay.as: Access of undefined property OSMFSettings.

  VideoInfoOverlay.as: Access of undefined property VideoSurface.

  VideoInfoOverlay.as: Type was not found or was not a compilation constant: VideoSurfaceInfo.

  VideoInfoOverlay.as: Access of netGroup property possibly undefined via a reference with org.osmf .net: static type NetStreamLoadTrait.

  VideoInfoOverlay.as: Definition org.osmf.media.videoClasses:VideoSurface could not be found.

  VideoInfoOverlay.as: Definition org.osmf.media.videoClasses:VideoSurfaceInfo could not be found.

  VideoInfoOverlay.as: Definition org.osmf.utils:OSMFSettings could not be found.

  StrobeMediaPlayer.as: Access of undefined property isDVRRecording.

  If someone has encountered this.  I know that OSMF 2.0 was recently released.  I could go back to 1.6, but some ABR features are very attractive.

  Hello

  OSMF 2.0 has a CFC included in download to http://sourceforge.net/projects/osmf.adobe/files/OSMF%202.0%20Release%20%28final%20source% 2C%20ASDocs%2C%20pdf%20guides%20and%20release%20notes%29/OSMF.swc/download files - you can use it.

  Please also replace the OSMF1_6_FP10.swc - or do not use this old SWC.

  S.

• Flash Builder random error associated with CFCS 'qnx-screen '.

  Hey all,.

  It's been about 8 months since I finally published my app PlayBook... It's been long since, so I'm a bit rusty...

  I'm seeing my source code, compile it with the new SDK.

  I downloaded the Simulator 2.0, updated the OS on my tablet to 2.0 and installed the new Tablet OS Beta 2.0 SDK.

  I am trying to get my application up and running, and I get this error:

  "Description Resource Path location Type
  "Could not open" / Applications/Adobe Flash Builder 4.5/sdks/RIM/blackberry-tablet-sdk-2.0.0/frameworks/libs/qnx-screen ' PaperRobo unknown Flex problem.

  I use a Mac and Flash Builder 4.5 running

  I use the Flex SDK 4.5.1... and it seems that all the appropriate Blackberry tablet SDK swcs are connected properly... See screenshot:

  

  Any ideas what's not here?

  It also looks that QNXApplicationEvent no longer exists?

  I also tried to create a new project from scratch and get the same error of Flash Builder

  I don't think that there is nothing wrong with your stature. Try to create a new project, as shown in jtegen and see if it works. If this does not work, you can still manually add the .swc files.

  It seems to be looking for them in the wrong place.

  "/ Applications/Adobe Flash Builder 4.5/sdks/RIM/blackberry-tablet-sdk-2.0.0/framework"

  s/libs/qnx-screen'

  Should be "/ Applications/Adobe Flash Builder 4.5/sdks/RIM/blackberry-tablet-sdk-2.0.0/framework"

  s/libs/qnx/qnx-screen

  If you do this be sure to do the qnx - air.swc marked as external.

• Flash Builder compilation bug; What am I doing here?

  Hello

  I recently did a clean install of Windows, and as a result, Flash Builder.

  Now, whenever I try to compile _FOR_RELEASE_ against a good project, I get the below error.

  No error displayed when debugging.

  The project is good and of a long-established date codebase I've been working with for several years.

  HOW TO COMPILE?

  Thank you

  G

  The path location type Resource Description

  com.google.common.collect.ComputationException: java.lang.NullPointerException

  to com.google.common.collect.ComputingConcurrentHashMap$ ComputingSegment.compute (ComputingCo ncurrentHashMap.java:167)

  to com.google.common.collect.ComputingConcurrentHashMap$ ComputingSegment.compute (ComputingCo ncurrentHashMap.java:116)

  at com.google.common.collect.ComputingConcurrentHashMap.apply (ComputingConcurrentHashMap.jav one: 67)

  to com.google.common.collect.MapMaker$ ComputingMapAdapter.get (MapMaker.java:623)

  at com.adobe.flash.compiler.internal.projects.CompilerProject.getCacheForScope (CompilerProje ct.java:701)

  at com.adobe.flash.compiler.internal.definitions.InterfaceDefinition.resolveExtendedInterfac es(InterfaceDefinition.java:123)

  to com.adobe.flash.compiler.internal.definitions.InterfaceDefinition$ InterfaceIterator.analy ze(InterfaceDefinition.java:343)

  to com.adobe.flash.compiler.internal.definitions.InterfaceDefinition$ InterfaceIterator.initF romInterface(InterfaceDefinition.java:325)

  to com.adobe.flash.compiler.internal.definitions.InterfaceDefinition$ InterfaceIterator. < init > (InterfaceDefinition.java:293)

  com.adobe.flash.compiler.internal.definitions.ClassDefinitionBase.interfaceIterator (class DefinitionBase.java:399)

  at com.adobe.flash.compiler.internal.definitions.ClassDefinitionBase.isInstanceOf (ClassDefin itionBase.java:429)

  at com.adobe.flash.compiler.internal.semantics.SemanticUtils.isInstanceOf (SemanticUtils.java:565)

  at com.adobe.flash.compiler.internal.semantics.SemanticUtils.isValidTypeConversion (SemanticU tils.java:220)

  at com.adobe.flash.compiler.internal.semantics.SemanticUtils.isValidTypeConversion (SemanticU tils.java:342)

  at com.adobe.flash.compiler.internal.semantics.MethodBodySemanticChecker.checkImplicitConver sion(MethodBodySemanticChecker.java:560)

  at com.adobe.flash.compiler.internal.semantics.MethodBodySemanticChecker.checkImplicitConver sion(MethodBodySemanticChecker.java:372)

  to com.adobe.flash.compiler.internal.semantics.MethodBodySemanticChecker.checkAssignment (Met hodBodySemanticChecker.java:244)

  at com.adobe.flash.compiler.internal.as.codegen.ABCGeneratingReducer.reduce_assignToNameExpr _to_void_expression(ABCGeneratingReducer.java:3026)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.action_238(CmcEmitter.java:4509)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.dispatchAction (CmcEmitter.java:81 61)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.reduceAntecedent (CmcEmitter.java: 39704)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.dispatchAction (CmcEmitter.java:95 07)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.reduceAntecedent (CmcEmitter.java: 39704)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.reduce(CmcEmitter.java:39681)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.reduceSubgoals (CmcEmitter.java:39 732)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.reduceAntecedent (CmcEmitter.java: 39703)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.reduce(CmcEmitter.java:39681)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.reduceSubgoals (CmcEmitter.java:39 723)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.reduceAntecedent (CmcEmitter.java: 39703)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.reduce(CmcEmitter.java:39681)

  at com.adobe.flash.compiler.internal.as.codegen.CmcEmitter.burm(CmcEmitter.java:39983)

  at com.adobe.flash.compiler.internal.as.codegen.ABCGenerator.generateInstructions (ABCGenerat or.java:232)

  to com.adobe.flash.compiler.internal.as.codegen.ABCGenerator.generateMethodBodyForFunction (a BCGenerator.java:397)

  to com.adobe.flash.compiler.internal.as.codegen.ABCGenerator.generateMethodBodyForFunction (a BCGenerator.java:351)

  at com.adobe.flash.compiler.internal.as.codegen.ABCGenerator.generateFunction (ABCGenerator.j ava: 266)

  at com.adobe.flash.compiler.internal.as.codegen.ClassDirectiveProcessor.finishClassDefinitio n(ClassDirectiveProcessor.java:468)

  to com.adobe.flash.compiler.internal.as.codegen.GlobalDirectiveProcessor.declareClass (Global DirectiveProcessor.java:424)

  at com.adobe.flash.compiler.internal.as.codegen.DirectiveProcessor.processNode (DirectiveProc essor.java:207)

  at com.adobe.flash.compiler.internal.as.codegen.DirectiveProcessor.traverse (DirectiveProcess or.java:189)

  to com.adobe.flash.compiler.internal.as.codegen.GlobalDirectiveProcessor.declarePackage (George alDirectiveProcessor.java:449)

  at com.adobe.flash.compiler.internal.as.codegen.DirectiveProcessor.processNode (DirectiveProc essor.java:224)

  at com.adobe.flash.compiler.internal.as.codegen.DirectiveProcessor.traverse (DirectiveProcess or.java:189)

  at com.adobe.flash.compiler.internal.as.codegen.ABCGenerator.generate(ABCGenerator.java:126)

  at com.adobe.flash.compiler.internal.units.ASCompilationUnit.handleABCBytesRequest (ASCompila tionUnit.java:374)

  at com.adobe.flash.compiler.internal.units.CompilationUnitBase.processABCBytesRequest (ationUnitBase.java:870 mix)

  to com.adobe.flash.compiler.internal.units.CompilationUnitBase.access$ 300 (CompilationUnitBas e.java:107)

  to com.adobe.flash.compiler.internal.units.CompilationUnitBase$ 4 1.call (CompilationUnitBase. java: 309)

  to com.adobe.flash.compiler.internal.units.CompilationUnitBase$ 4 1.call (CompilationUnitBase. java: 305)

  to com.adobe.flash.compiler.internal.units.requests.RequestMaker$ 1.call (RequestMaker.java:22 8)

  to com.adobe.flash.compiler.internal.units.requests.RequestMaker$ 1.call (RequestMaker.java:22 2)

  to java.util.concurrent.FutureTask$ Sync.innerRun (unknown Source)

  at java.util.concurrent.FutureTask.run (unknown Source)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (unknown Source)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  Caused by: java.lang.NullPointerException

  at com.google.common.base.Preconditions.checkNotNull(Preconditions.java:187)

  at com.google.common.collect.CustomConcurrentHashMap.hash(CustomConcurrentHashMap.java:1432)

  at com.google.common.collect.ComputingConcurrentHashMap.apply (ComputingConcurrentHashMap.jav one: 66)

  to com.google.common.collect.MapMaker$ ComputingMapAdapter.get (MapMaker.java:623)

  at com.adobe.flash.compiler.internal.scopes.ASProjectScope.addScopeToCompilationUnitScopeLis t(ASProjectScope.java:1306)

  to com.adobe.flash.compiler.internal.projects.CompilerProject$ ScopeMakerFunction.apply (build lerProject.java:106)

  to com.adobe.flash.compiler.internal.projects.CompilerProject$ ScopeMakerFunction.apply (build lerProject.java:95)

  to com.google.common.collect.ComputingConcurrentHashMap$ ComputingSegment.compute (ComputingCo ncurrentHashMap.java:155)

  ... 54 PlayerSprite.as/RTE_OSMF_Player/src line 37 Flex problem

  Update; I updated the SDK to the current according to the guidelines of this https://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html

  It seems to have solved the problem for now. I'll watch it.

• 1 error when tried to install Flash Builder on Windows 8.  No file to uninstall.  Caught in loop

  I need to install Flash Builder on my windows computer 4.7 8.  I started the installation process, but was soon stopped because of error 1.  The software wants me to uninstall/reinstall the software.  There is no program installed on the computer.  Unable to find persistent cookies in regedit.  You need to install this software.

  Cmccullough2 I recommend you review your files Setup for the specific error message logs.  You can find details on how to locate and interpret your logs to troubleshoot installation install problems with log files. CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are invited to post specific errors that you will discover in this discussion.

• RSL error 1 of 1, Error #2032, 3.6 A Flex, Flash Builder 4.6

  We are in transition from Flex 3. 1 to 3.6 a. Everything worked well for years under 3.1. We tested under 3.6 for a month under HTTP, and everything works. When weinstall to our staging server and run under HTTPS, we get this error and NO OTHER INFORMATION.

  We test under Flash Builder but build production SWF and swc using the MXMLC and COMPC command-line tools. We use the Framework RSL and copy the swf/swz files on our servers as part of the installation.

  Display the MXMLC to compile signup.mxml:

  Loading configuration file C:\Program Files (x 86) \Adobe\Adobe Flash Builder 4.6\sdks\3.6.0\frameworks\flex-config.xml

  D:\Develop\CSM\PractiCal\Flex\null1709033641.xml loading configuration file

  D:\Develop\CSM\PractiCal\Flex\build\signup.swf (174148 bytes)

  Contents of the configuration file "null1709033641.xml":

  <>flex-config

  < compiler >

  false < debug > < / debug >

  < library-path append = "true" >

  element < path > D:\Develop\CSM/CSMCommonFlex/build/CSMCommonFlex.swc < / path element >

  < / library path >

  < / compiler >

  <-static link-TIME-shared-libraries > false < / static-link-TIME-shared-Library >

  < use-network > true < / use-network >

  true <-digestions check > < / check-abstracts >

  < runtime-shared-library-path >

  < element > path C:\Program Files (x 86) \Adobe\Adobe Flash Builder 4.6\sdks\3.6.0/frameworks/libs/framework.swc < / path element >

  Flash/framework_3.6.0.21751.SWZ < rsl - url > < / rsl - url >

  < policy-file-url / >

  Flash/framework_3.6.0.21751.swf < rsl - url > < / rsl - url >

  < policy-file-url / >

  < / DURATION-shared-library-path >

  < / flex-config >

  It's everything I could find on the web:

  1. Make sure that the web server includes extension .swz as type MIME "application/x-shockwave-flash".
     Fact.
     
     
  2. Add a "crossdomain.xml" file to the root of the web server and make sure that it can be read.
     Trying the two secure = "true" and secure = "false".

  <? XML version = "1.0"? >

  < ! DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd" > ""

  < cross-domain-policy >

  < allow-access-from domain = "" * "secure ="true"/ >"

  < / cross-domain-policy >

  As I said, everything works well under 3.1.

  I am dead stuck and have no idea what to try next.

  Please, please, help.

  In the Flex 3 documentation for the MXMLC Compiler, the rsl-url of the option attribute is described as

  "You specify the location of the SWF file to the location of the application deployment.

  For example, if you store a file named library.swf in the web_root/libraries directory on the

  Web server and application in the root web, you specify libraries/library.swf. »

  This clearly indicates that the URL of the library is relative to the swf file.

  The documentation for the rsl-url of the runtime-shared-library-path option attribute is not so clear, however:

  "Rsl - url argument is the URL of the RSL that will be used to load the RSL during execution.
  The compiler does not check the existence of the SWF file at this location at compile time.
  It stores this string in the application, however, and he uses at run time. As a result, the
  SWF file must be available at run time, but not necessarily at compile time. »

  Obviously, both rsl-url attribute should contain a URL to the swf app and the 3.1 Flex MXMLC was store the URL as relative to the web root. I offset this in my config 3.1 files by providing a URL relative to the root, but without the leading slash (/). This bug has been fixed somewhere between 3.1 and 3.6 so my relative to the root URL were now be saved correctly, as app-parent.

  Adding a bar leading slash (/) to my relative to the root URL solves the problem.

  I know - he should be here in the first place.

• Strobe Media Player broke after assets.swc of compilation and compilation project in Flash Builder

  I use CS5.5 - Flash Builder 4.5 and Flash Professional 11.5.1.349.  If I import a new Strobe Media Player 1.6.328 project into Flash Builder and compile, it works as expected and the StrobeMediaPlayback.html page load in my browser and behaves normally.

  Then I load assets.fla into Flash Professional and don't edit and publish a new assets.swc.  Then I go back to Flash Builder and refresh the StrobeMediaPlayback project and recompile.  This time when StrobeMediaPlayback.html loads in the browser, the SWF Strobe is instantiated on the page but is not executed, i.e. no play button and no bar scrub down, just a black box.  The black box right button brings up the Flash menu so the SWF load has it but stopped somewhere running.

  I try to get the debugger working in Flash Builder, but so far without success.

  I hope that someone has seen this before and has some ideas.

  Kind regards

  Tim

  The problem was simply to fonts.  Fonts in StrobeMediaPlayback/assets/fonts must be installed in the operating system.  In my case Windows so just right button on the font file and select install.

• Flash Builder 4 - Configuration error (OSX 10.5)

  I currently run plugin eclipse for Flash Builder 4 under Eclipse 3.5. I installed the plugins are: Subclipse 1.6 and Aptana Studio 2.0. When I have the FB plugin with other plugins all works fine until I reboot OSX. After a reboot when I go to launch Eclipse I am presented with the following:

  Configuration error

  Please uninstall and reinstall the product.

  If this problem persists, please contact Adobe

  technical support to help them and mention of the error

  the code that is shown at the bottom of this screen.

  Error: 5

  I have not contacted technical support Adobe still on this issue. Following the statement I uninstall FB and the same Eclipse and download and install them both but especially every time that I reboot OSX and/or restart eclipse I am presented with the error Configuration screen. Note: when this error message appears I am unable to view Flash Builder related perspectives. That is to say, when I open *.as files that I am presented with a blank point of view. When I try to open all files is below the error in perspective:

  java.lang.NullPointerException

  to org.eclipse.ui.part.MultiPageEditorPart.createContainer(MultiPageEditorPart.java:285)

  to org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:356)

  to org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:662)

  to org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:462)

  to org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)

  to org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:313)

  to org.eclipse.ui.internal.presentations.PresentablePart.setVisible (PresentablePart.java:180)

  to org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select (PresentablePartFo lder.java:270)

  to org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select (LeftToRightTabOrder .java:65)

  to org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart (TabbedStack Presentation.java:473)

  to org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1256)

  to org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1209)

  to org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1608)

  to org.eclipse.ui.internal.PartStack.add(PartStack.java:499)

  to org.eclipse.ui.internal.EditorStack.add(EditorStack.java:103)

  to org.eclipse.ui.internal.PartStack.add(PartStack.java:485)

  to org.eclipse.ui.internal.EditorStack.add(EditorStack.java:112)

  to org.eclipse.ui.internal.EditorSashContainer.addEditor(EditorSashContainer.java:63)

  to org.eclipse.ui.internal.EditorAreaHelper.addToLayout(EditorAreaHelper.java:225)

  to org.eclipse.ui.internal.EditorAreaHelper.addEditor(EditorAreaHelper.java:213)

  to org.eclipse.ui.internal.EditorManager.createEditorTab(EditorManager.java:778)

  to org.eclipse.ui.internal.EditorManager.openEditorFromDescriptor(EditorManager.java:677)

  to org.eclipse.ui.internal.EditorManager.openEditor(EditorManager.java:638)

  to org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2854)

  to org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2762)

  to org.eclipse.ui.internal.WorkbenchPage.access$ 11 (WorkbenchPage.java:2754)

  to org.eclipse.ui.internal.WorkbenchPage$ 10.run(WorkbenchPage.java:2705)

  to org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)

  to org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2701)

  to org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2685)

  to org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2668)

  to org.eclipse.ui.ide.IDE.openEditorOnFileStore(IDE.java:1151)

  to org.eclipse.ui.internal.ide.actions.OpenLocalFileAction.run(OpenLocalFileAction.java:107)

  to org.eclipse.ui.internal.ide.actions.OpenLocalFileAction.run(OpenLocalFileAction.java:76)

  to org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)

  to org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)

  to org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection (ActionContributionI tem.java:584)

  to org.eclipse.jface.action.ActionContributionItem.access$ 2 (ActionContributionItem.java:501)

  to org.eclipse.jface.action.ActionContributionItem$ 5.handleEvent (ActionContributionItem.java:411)

  to org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)

  to org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1598)

  to org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1622)

  to org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1607)

  to org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1396)

  to org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3484)

  to org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3068)

  to org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405)

  to org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369)

  to org.eclipse.ui.internal.Workbench.access$ 4 (Workbench.java:2221)

  to org.eclipse.ui.internal.Workbench$ 5.run(Workbench.java:500)

  to org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)

  to org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)

  to org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)

  to org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)

  to org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)

  to org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication (EclipseAppLau ncher.java:110)

  to org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start (EclipseAppLauncher.jav one: 79)

  to org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)

  to org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  to sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  to java.lang.reflect.Method.invoke(Method.java:592)

  to org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)

  to org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)

  to org.eclipse.equinox.launcher.Main.run(Main.java:1311)

  I have installed and uninstalled the plugin eclipse FB several times in the past without results day. Any help on this will be most welcome!

  ~ Go

  I won't move on me because it took a few days for the problem appears for the first time, but I seem to have fixed.  When I came first on the configuration error I rode back to the beta versions of Flash Builder and CFBuilder, but today when I pulled upward, Eclipse, I was greeted with a warning that says that the beta version of CFBuilder had expired.  I have uninstalled and installed the release version.  After having restarted Eclipse, I got an error message that says: "License for this product has stopped working".  I came across this technical note and began working through the recommended patches.  In the end, I uninstalled all of my Adobe products and removed the Adobe PCD, backup and inventories of caps.  I downloaded a new Eclipse installation and started to re-installed Adobe products.  For the moment, I have versions of Flash Builder and CFBuilder running with happiness as plugins.