Flash drive / impossible to erase the content

Similar Questions

• Flash drive, write protected after the use of Ready Boost

  I have a 8 GB USB flash drive, and I've been using ~ 4 GB for Ready Boost for quite a while now. When I tried to write something on the drive recently, I get a message saying that it is write protected. I tried to change the size of the cache, but has nothing - no error and no change. Tried turning off RB for the drive and nothing. There is no protection switch on the drive, so nothing to break. Tried to restart, refomratting the drive - no joy.

  Only, I could get a new drive because they are so cheap, but this one has a MicroSD in it like a separate disk drive, so I would keep

  Hello

  You can remove your usb flash drive write protection using the method below:
  a. open the start menu, in the search bar type regedit, and then press ENTER. This wil open the registry editor.
  b. navigate to the following location:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  Note:
  If StorageDevicePolicies registry key does not exist, you must create it manually.
  c. highlight StorageDevicePolicies, and then create a new DWORD called WriteProtect (32-bit).
  d. double-click the registration key in the right window, and then set it to a value of 0 in the value data box
  e. press OK
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• error when trying to save to a flash drive "word cannot complete the save due to a file permission error.

  error when I try to record that a flash drive "word cannot complete the save due to a file permission error" (F\:filename)

  Hello

  We have recently launched a Microsoft Answers for Office forum:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Best wishes!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get a flash drive will appear on the desktop when it is attached

  I use a Macbook Pro OS 10.7.5 and when I join my flash drive, it is not

  appear on the desktop.

  I can find the files with the Finder, but I would like to have the device appears on the desktop.

  What should I do for having done that?

  Thank you.

  Look at the preferences of finders.

• How to copy music from a flash drive to another on the mac pro?

  I recorded 7 songs on a flash drive directly entered a fender sound system. How to I transfer these songs to another white flash drive now. I already loaded songs on i-tunes/playlist, but my mac does not burn the usb flash drives, only the cd?

  Drag them to the desired location.

  (139611)

• Using the Flash drive when you use the Mac book Pro?

  I am currently trying to determine whether it would be useful to add an extra cost of £400 for the other half TB of Flash Drive when buying top spec Mac book Pro?

  Depends on your storage needs. You're OK with unloading of LARGE files on an external USB 3 drive? If so, you can save the $$$ and get the 256 GB.

  I have 256GB flash on my retina of MBP 2015 and that's a lot for me. If I start running out of space, I'll spend LARGE files my server or an external USB drive to free up space on my MBP of retina.

• USB flash drives not detected on the Windows XP-based computer

  Original title: flash drives

  I have win - xp on a dell 2400 platform its flash USB 2.4 G & 533 Mhz. readers and cameras are no longer rec. of my USB ports on comp. I formatted & restarted win - xp on the computer to fix this problem without success. Can anyone help?

  Hello

  1. what exactly happens when you connect USB devices to the computer?

  2. you receive an error message when you connect the USB to the computer?

  Check the status of the USB device in Device Manager:

  a. click on start

  b. click on run

  (c) in the Open box type devmgmt.msc

  d. in Device Manager, expand universal serial bus controllers

  e. double-click the device and check if an error message or error code is listed

  Method 1:

  You can run the fix provided in the link below it to solve the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Method 2:

  Remove and reinstall all USB controllers

  a. to remove and reinstall all USB controllers, follow these steps:

  b. Click Start, run, type sysdm.cpl in the Open box and then click OK.

  c. click on the Hardware tab.

  d. click the Device Manager button.

  e. expand Bus USB controllers.

  f. right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  g. restart the computer and reinstall the USB controllers.

  h. connect the removable USB storage device and perform a test to ensure that the problem is solved.

• transfer to a flash drive, of files to the folder "my music"...

  Greetings friends, I am new on Vista Ultimate, and I'm confused as to how to transfer my music from a USB flash files in my music folder... Can someone help me with this problem please?  I would be very happy... Please...

  Plug the flash drive n. Open Windows Explorer, and then open the flash drive. Highlight and select all and right click and drag it to the folder my music. Choose copy here.

• Our AppleTV alcoholic, if we opt for a movie / TV that was bought, we get the notice that it is "impossible to load the content. You need to restart completely to access the content you've purchased.

  We have the AppleTV (4th Gen, 64 GB). Whenever we 'wake up' the AppleTV from sleep, we are unable to access all our content purchased until we start the system. We have never had this problem until a few weeks ago. All software is up-to-date and automatically update, internet is very good, and nothing has changed since we have implemented the AppleTV. Frustrating to not be able to access the content that we have already purchased without jumping through hoops.

  Hello

  I met this time. All I did was to completely close the application TV Shows and reopened. It worked after that without needing a reboot.

• Impossible to access the contents of a window (PopUp)

  Hello
  
  I'm trying to access the contents of a MovieClip I placed inside a PopUpWindow component, but cannot figure out how to do this. I've created the window with something like this:
  var SAedit_win:MovieClip = mx.managers.PopUpManager.createPopUp (_root, window, true, {closeButton:true, title: "Arterias Sistemicas", contentPath: "contentSA"});
  
  With this code, the window IS correctly created and the "contentSA" MovieClip (which is in the library) is properly indicated. However, I wanted to access the objects inside the "contentSA', but I can't find a way to do it. I have already tried:
  -SAedit_win.content (which is read-only...)
  -SAedit_win.contentsPath (which of course did not)
  -SAedit_win.target
  -SAedit_win.contentSA
  
  Can someone help me with that please?
  
  
  Tanks in advance
  
  JLonardoni

  Well, I give up. I looked everywhere on the net and found out that I'm not the only one. It is a not uncommon problem, but I think he has no answer, because all the forum posts I found unanswered.

  So, I have developed my own window with everything I wanted... It is not very OO, but it does the job.

• Upgrade memory, video cards, flash drives? What is the best?

  I have a Toshiba Satellite L305 - S5957 bitb with Windows 7 32. I have a lot of downloaded games I play and my computer and he slowed down a lot. This is what seems to indicate that I can improve the performance by adjusting the Visual effects. A friend suggested to put all the games on a bunch of flash player adding another more Ram.Somebody suggested that I get a video card. How do I p [ay my games and still have enough memory to my computer run?] Here's what I spent my system for graphics.

  Thank you

  Luggiana

  Type of view map Mobile Intel (r) 4 Series Express Chipset Family   Total available graphics memory 830 MB   Dedicated graphics memory 128 MB   Dedicated system memory 0 MB   Shared system memory 702 MB   Display adapter driver version 8.15.10.2226   Resolution of the primary monitor 1280 x 800   Version of DirectX DirectX 10

  Hi Luggiana,

  your laptop is not a true "game system.

  (1) a graphics integrated solution as "Mobile Intel (r) 4 Series Express Chipset Family" is not sufficient for most 3D games. They can work but slowly and far from that possible framerates.

  (2) for most of the games, "available total graphics memory" is a phantom value. The only thing that matters is "dedicated graphics memory. In your case, which is 128 MB. Not bad for older games (2000-2006), but certainly too little for newer games (> 2006). Some games will not work with less than 256/512/1024 MB "dedicated RAM".

  (3) "computer memory" is a minor problem here. The 'shared RAM' will cut certainly some amount of your available RAM total but it won't help in problem gambling, and it is rare to play a game while performing other tasks consuming memory.

  (4) put the games to a flash (SSD) drive is also a strange idea. You will get more benefits if you put your operating system (Windows) on this subject. The operating system must respond to all the interventions of the user and program requests, here the speed is an issue. A game, on the other hand, follows its routines, it must store temporary data much, so relying on a certain minimum of RAM but things like quick / fast writes are not so important.

  "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• Erase the contents of a duplicate table but keep format

  Happy new year to all!

  So I created, in 2015, a table to keep track of my expenses for drugs. The table consists of 10 columns in text format, jump - rises, currency, and date and, at the end of 2015, I got 73 rows with a value of content.

  For 2016, I reproduced the sheet I didn't rebuild the table from scratch and lose data (names and names of medicines from the doctor) populating the menu drop down.

  Unfortunately I'm not sure how to delete content from 2015 while keeping the format for each column. By selecting, clicking clear all or Delete clears the two format AND content.

  Much appreciated for advice.

  

  Hi Frank,.

  Suggestion 1.

  You can keep the context Menus. No need to delete.

  Select a column of pop ups and add an empty element (start vacuum)

  

  The pop-ups will look like this:

  

  Select an embedded menu and choose no (empty).

  Copy.

  Select all the pop-ups in the column and the dough

  All popups in this column will appear white, ready for you to choose another doctor in each line for 2016.

  

  Repeat for all columns of the pop-ups.

  Suggestion 2.

  Consider an input table and a table of results.

  

  

  The results table contains the formulas that you want to keep. No need to delete.

  Suggestion 3.

  If Rx and DIN are the same from one year to another, consider storing in another table and use a type of function LOOKUP to match the name of the drug or something else and automatically enter these values.

  Kind regards

  Ian.

  Edit: Save as template for 2017!

• Windows vista USB flash drive installation AND recover the WINDOWS KEY from the recovery disk

  Hi all

  I formatted my laptop some time ago. Now I want to reinstall windows vista (came along with my laptop). The thing is due to a problem that my CD drive does not work so I would like to install windows vista by using a USB key. Can you get it someone please let me know if this is possible... If Yes, how I've go ahead make a bootable USB.

  As someone can tell me if there is a way to retrieve the WINDOWS KEY from the recovery disc.

  Thank you.

  Hello

  This can help, but you will need a Vista system to create the working bootable USB key:http://www.askvg.com/how-to-create-bootable-usb-drive-to-install-windows-vista/

  As for the product key, it should be on a sticker on the laptop (usually on the bottom). If it is not readable, contact the manufacturer for further assistance. As we said already, the product key is not on the installation disc.

  Replace broken laptop optical drives is not too difficult, you can see this as another option.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• What happens if I forget to remove my key (Flash DRIVE) storage media after the Bitlocker Drive encryption key is responsible?

  I'm new to BitLocker and don't know much about computers in general. I do not have a TPM, so I use a USB key containing the BitLocker encryption key to start Windows. Everything works fine. I don't, however, forgot to remove the USB after that and also when you restart the computer. This could be a security problem if I am connected to the Internet? (I'm alone and therefore am not worried else wanting to access the computer in person.) I'd appreciate any help I could get with this question.

  Hi Tombroilt,

  If you are only using the computer, then it is not a security problem. If you connect to the computer. I suggest you to see the following links for more information.

  Windows 7 BitLocker Executive Overview
  http://TechNet.Microsoft.com/en-us/library/dd548341 (v = WS.10) .aspx

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  http://TechNet.Microsoft.com/en-us/library/ee449438 (v = WS.10) .aspx

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• ESXi installed on a USB flash drive - what happens to the remaining space?

  ESXi requires only 1 GB of the flash player, so I wonder if the remaining space could be used for other purposes - for example, files storage logs or something? Or ESXi reserves the rest of the space?

  The remaining space remains unused. Volumes VMFS as well as scratch location requires storage 'rapid '.

  André