Flash is required for this?
I have an image which I split into sections. Ideally, I'd like users to be able to hover over a certain task on the image and the image zoom in on that area and a text box expand with info on this particular area.
I read it is possible for me to make the image zoom with jQuery (although I don't know how to to this topic...), but that would not solve my problem with expanding text areas.
Being a novice (so quick to pick it up!), I'm not entirely sure if this is even possible. Any info would be helpful and any help appreciated! :-)
Yes, you can use Flash to do this.
Tags: Adobe Animate
Similar Questions
-
6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package. A program required for this teaching to complete could not be run. Contact your supplier of staff or the package of support ". There is no associated error code. I've never had a previous issue with ITunes updates. Thank you, Debbie
Repair Apple Software Update since the programs & features Panel configuration and then try again.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
Installation package. A program required for this install to complete could not be run. "Help, please.Hello..
Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC
-
There is a problem with this Windows Installer package. A program required for this install to complete, could not be executed. This appears when trying to update
Repair Apple Software Update of programs and features, Control Panel, and then try again.
If not for general advice see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.
TT2
-
Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...
aarruunn, you might want to try Windows Installer Cleanup utility.
http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
Original title - USB - IF xHCI USB Host Controller
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I have a permanent error on my computer and when I run the troubleshooter I get the above message. It says Windows cannot load the driver.
Hello
USB devices remove all you can - restart the computer - is still there, the error? If it isn't
It is related to one of the add-in devices that you removed. If she is still there, then, the question is
either a device internal who can not remove or physically with the USB bus itself.
If it was not there, add devices at a time until it is displayed - keep in mind that it is
possible that there are two (or more) devices in conflict over the issue. Once you
identified the check of the aircraft with the help of the manufacturer.1. to find the control panel - device - device - right-click on it - uninstall - Manager then
Restart the computer to see if it clears.2. same place - double click on the device - driver tab - driver update - to see if that helps.
3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
online documentation and drivers, diagnostics and ask questions in their forums on all known
questions. Update the Bios and chipset or other USB drivers.=====================================
If necessary, we will use these additional troubleshooting methods:
How to fix Code 31 errors
http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
Windows Installer package error
When installing iTunes I get a message error "there is a problem with this Windows Installer package. A program required for this install to complete could not run. "I downloaded Windows Installer 4.5, rebooted and tried again with the same results. How can I fix?
Hello
Important The Windows Installer Cleanup (MSICUU2.exe) utility that was previously referred to as in this article has been abandoned. Although the Windows Installer Cleanup utility solved a few problems installing, it sometimes damaged other components that have been installed on the computer. For this reason, the tool has been removed from the Microsoft Download Center. program install and uninstall problem solving
(http://support.microsoft.com/mats/Program_Install_and_Uninstall)is a replacement for this utility.
"The problems with programs that cannot be installed or uninstalled.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And see if this information helps you install iTunes:
"Not to install iTunes or QuickTime for Windows"
http://support.Apple.com/kb/HT1926
«Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»
http://support.Apple.com/kb/HT1923
If the advice already given does not, please contact Apple for assistance.
"iTunes support-how to use iTunes.
http://www.Apple.com/support/iTunes/
"Contact iTunes Support.
http://www.Apple.com/support/iTunes/contact/
Or ask in the community Apple iTunes:
https://discussions.Apple.com/community/iTunes
See you soon.
-
Missing package?
Hello I'm trying to update my itunes to the latest version of the software. When I start the update process you get about a third or less the way in then an error box appers of reading: "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ". I am running Windows XP Professional and I have contacted Apple support and they asked me to contact Microsoft.
Hello
I suggest you according to the question in this forum and check if that helps:
https://discussions.Apple.com/community/iTunes/itunes_for_windows
It will be useful.
-
Original title: after recent update, the installation software WONT work properly! Help!
- I am in desperate need of aid. I didn't something again on my computer, but these recent software updates. I've recently updated my my itunes and from itunes then will opens not or install it. It was working fine before that was last updated, but now used. I tried to uninstall several times, in a variety of versions. Still nothing. Is not specific to the user and system wide as well.
I get a message saying "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".
Anyone know what I need to do? Or how to fix it?
Hi MxGurl,
If this occurs after the installation of update Itunes, then go to the following link and check if it helps.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
http://support.Apple.com/kb/TS1717
If this does not help, you should contact Apple support or post in the Apple discussion forums.
http://discussions.Apple.com/category.jspa?categoryID=149
You can also check out the following link and try the steps by Suresh I Support Microsoft, moderator and Andre.Ziegler and check if this may help
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
- I am in desperate need of aid. I didn't something again on my computer, but these recent software updates. I've recently updated my my itunes and from itunes then will opens not or install it. It was working fine before that was last updated, but now used. I tried to uninstall several times, in a variety of versions. Still nothing. Is not specific to the user and system wide as well.
-
He said: "there is a problem with this installation package. a program required for this installation could not be completed, contact your provider of batch
original title: itunes is not installed.Hello
Did you change your computer?
Method 1:
I suggest you to see the links and check.
Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/HT1926
See also:
Solve problems with programs that cannot be installed or uninstalled http://support.microsoft.com/mats/Program_Install_and_Uninstall
How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651
I also suggest you to contact the Apple support and check.
-
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Hello
Have you tried to update the drivers as suggested by Basith M?
Method 1:
You can run the fix provided in the link and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/GP/hardware_device_problems
Method 2:
You can also try the procedure described in the link to troubleshoot driver issues.
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
See also the proposal contained in the link and check.
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520/en-us -
Problem Windows install
When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.
I looked at several forums and tried cleaning patches, etc they suggest. I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)
I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!) Someone out there has a solution?
Hello, Atwitsend...,
Try to repair.
Go into Add Remove Programs, then select Apple Software Update > change > repair.If this does not work, try to uninstall. .
Remove and reinstall ITunes, Quicktime, and other software components
http://support.Apple.com/kb/HT1923Download the iTunes Installer and save it on your desktop.
http://www.Apple.com/iTunes/download/
Try to install iTunes using the installer that you saved.
-
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
-
Original title: problems during the installation of products on vista with error message that indicates:
I need help ASAP please! I tried to install the new Itunes software and my Vista laptop just will not let me... any ideas.I have download the new iTunesSetup and click it to start the installation process and the process begins. After 2 minutes, the following message appears:
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.
I already did:
- "To manage my computer' on automatic rather than manual
- Guests of controls too and still no change
This has been going on for about a week or two now, and I really need help.Any ideas or help would be appreciated.Thank youHi once again, fortunately today I bring better news! As a result of a serious lack of assistance from Apple themselves, have no idea of "The Tech Guys" in the world PC and extremely unnecessary hours at Microsoft, I've sorted it me. In other words, the main problem with mine was the Apple Software Updater. Even with "Revo" I was unable to remove it. I decided to download "Windows Installer Clean Up" from there where I could find (it was also free!). I used it and immediately found, I could choose the Apple Software Updater and remove it with very little hassle in all. I proceed to download the new iTunes, and I'm a very happy Bunny! Thanks for nothing, Microsoft and Apple! Hope this helps - Dan
Maybe you are looking for
-
downgrade to a plan 50 GB free storage
Hi, I have subscribed for an archive additional GBP 50, and now that I bought a new phone, I want to downgrade the plan and to stop paying the monthly fees. Any help? Thank you very much in advance M
-
Laptop HP 2000: power on password
I can't find a way to move beyond the power on password. My husband died a few months ago and I do not know the password? Suggestions?
-
I get error code 0 x 643 trying to install an update
How can I fix error code 0 x 643 so I can install a update on my computer
-
How do I put selection Stand By then paralyze the system?
I had to reinstall my Windows XP and I lost the ability to put my computer in 'Stand by' mode, or in Hibernation? How can I activate these features?
-
my wireless connection disappeared