Flash mobile banner extensible HTML5 canvas? HOW? ALL THE WORLD?

Similar Questions

• How in the world does Mac loses its universal as shortcuts CmdC (copy)?

  How in the world does Mac loses its universal as shortcuts CmdC (copy)?

  Lost the feature universal paste. Manually add them back in keyboard shortcuts. They do not work in all programs. If I copy and paste a url in a browser, it is not paste in ANYTHING. What an absolutely frustrating experience! The most common features have disappeared and now they don't work well. Really? Come on Apple! This is not what Mac users are accustomed to Apple.

  Run disk utility to see if the startup disk needs repair.

  You can also try a Safe Mode boot that removes the system caches that can help...

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to copy / paste keyboard shortcuts.

• I have an a box opened with Adobe.  Why cat would be closed at midday on a Tuesday? How in the world I can thanks to their?

  I have an a box opened with Adobe.  Why cat would be closed at midday on a Tuesday? How in the world I can thanks to their?

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  This forum is mainly for questions about the download and installation.  If your problem is to download and install then you should fill in the details of it so that the correct contact information may be offered.  Apart from what the cat can be a difficult animal to tame so follow the advice of cookies/browsers and keep at it.  If all else fails try to send a message private to any members of the staff are listed at the top of the page view of all Participants and they might be ready/capable of organizing the contact.

• Conversion of .fla in html5 Canvas - how 'start' to work again?

  I'm converting my old files, .fla to html5 Canvas and the published file (html5) autoplays. The old output (.swf) did not begin until the included button has been activated. How can I get this feature back (it was action script). I'm not very good with Flash so please explain for a dummy ;-)

  Thank you

  Hanna B

  For anyone following, this.stop () was the correct code to stop the animation, but the animation was all in a movieclip in a main scenario 1 frame. () This.stop had to go inside the movieclip.

• [HTML5 Canvas] How to change the scene?

  Hello

  I have an animation created in a HTML5 Canvas document. When seen in the browser, it is displayed in the size of the document, which is not surprising, but what I want to do is display the full window size, scaling to fit. Basically, I'm looking for the equivalent AS3 scaleMode and align with the SWF in height and width to 100%. The publication settings is not all the options related to the scaling, so I don't know where to look. How should I do this?

  Thank you!

  -Aaron

  Hi all

  Sensitive scaling options are now part of the HTML5 canvas publication settings in the latest version of animate CC (2015.2)

  See here: new feature summary (June and August 2016)

  Creating ads with CC HTML5 animate: canvas reactivates the scale. Animate Adobe blog

  Update your copy of Animate through the creative application of cloud and try it now!

• HTML5 canvas how to use movieClips created onstage goToAndPlay()

  I created a simple slide show and a series of small navigation buttons on the platform of html5 canvas. The goToAndPlay() function works OK on the main timeline, but not on timeline timeline navigation buttons. I don't know enough createJS to find a workaround. Journal of said browser gotoAndStop is not a function. I just want to do a mouseover and mouseout/mouseouthandler() managers, the button can play the role of his chronology.

  Any ideas?

  You must reference the movieclip.

  for example, if you try to control the movieclip as well as one that contains the code, use:

  this.gotoAndPlay ();

  not

  gotoAndPlay();

• HTML5 canvas - export of the problem images.

  When I create Flash CC html5 canvas banner, after the publication (without the "convert pictures to spreadsheets" checked) Flash kind of renders new images for each image used. Is it possible that it moves just as the used original images in his case without making (to much larger sizes in KB)? Im not using 'export all bitmaps to the worksheets' because the result is ultra heavy. I thought that its only because logic software used for the creation of ad After unchecking this option Flash will take the prepared files and use them with their sizes and formats (or jpg, png8 gifs - according to what is best in the particular case).

  That's all just ridiculous prepare the images with the lowest possible sizes to meet the specifications and limits of size of the whole creation, and then after the publication, they are replaced by heavy substitutes... WTF? You really want to send all non-programmers, non-webmasters, non-codeurs of packaging and to change trades? I have no skills of the programmer. IM used to prepare graphics and act as a query designer. With this awkward behavior of FLash CC when it comes to html5 sound simply ridiculous.

  And while I can do a workaround solution by replacing the file oversized (in KBs) with original file when they are two .png files, changing the png in compressed jpg of origin with the optimal size will get delicate - what I need to change the published scripts and html file? Seriously? Html5 cant use jpg? I don't think it's a problem... Then why the hell noone thinks about when any company ads is moving to html5? Portals custom suddenly double their size limits for ads. How do I now just huge ad campaigns? Vous attendez que quelqu'un va attendre des semaines pour que, bien que nous éditons chaque fichier html et script pour remplacer le freaking png en jpg compressé original et traiter avec des tons d’autres problèmes ?

  Edit: did not use the jpg in this case tho so maybe I am mistaken and it won't get replaced with png huge fat, but again, the files small replaced png8 with double its file size is ridiculous

  In the settings of publication under Export Options, you can uncheck that box [] images. Then, once you've optimized your images, you won't have to worry about flash crush them with larger files.

• out of HTML5 Canvas flickers at the beginning

  Hello

  I'm reformatting Flash for html5 canvas via animate. Works very well, but after you publish the animation to eject at the beginning (not during operation).

  Any idea?

  Thank you and best regards

  Before your graphics load, if you do not have a preloader it will be a "flash" of just the background color of the canvas before appear the graphics.

  If please try my suggestions above and let me know how they work for you.

• Flash video not working does not, despite all the previous solutions

  On some embedded flash video sites do not work properly. Strangely enough, youtube works very well.

  I've browsed the forum and have tried the following solutions, none doesn't seem to work:

  -Disable Realplayer (which is not installed on my computer)
  -Downgrade to Flash 11.2
  -Switch to Firefox 14

  How does it work, is to run Firefox in safe mode. This means that one of my custom extensions/add-ons gives me a hard time. Safe mode stops all my Add-ons, and obviously this isn't what I want. So I went to my list of Add-ons and the disabled one by one, trying to figure out what the troublemaker. Oddly enough, even when I disable all the manually, the problem is not resolved. So somehow safe mode stops more that I can do it manually. Does anyone have an idea how can I know what are the causes of the problem?

  Hardware acceleration is also disabled in safe mode.

  Try turning off hardware acceleration.

  Options > advanced-> general - navigation

• PowerConnect 5448, how all the trunk of physical ports and allow all the VLAN tags to pass transparently

  I would like to achieve such a goal, do all acts of switch ports 5448 as 'trunk', that is, just as an entry-level switch. Yes, I want all the tags VLAN through seamlessly.

  Let me explain more clearly. If

  • With MAC1 PC1 is connected to switch port 1 (port 1) in short, PC2 with MAC2 is connected to port 2.
  • PC1 sends a packet with vlanid = 30 ethernet VLAN tag,.

  I want the ethernet packet must be SENT to port 2 without modification, i.e. 2 PC will receive the package with exactly the same byte packets that PC1 sends.

  Currently, I want to configure all ports from the switch to act like this, but how to do this? Can someone tell me the more concise CLI commands to achieve? Alternatively, it is possible via the web interface?

  I must again complain the poor manual, which talks about this concept and this notion over and over again (both of ambiguous statements that the author of manual does not), BUT doesn't explain them not at the level of the content of the packages, so I'm totally at a loss.

  I tried the web interface. Simply together port 1 and 2 for access mode or general mode does not work.

  Please help me. Thank you in advance.

  Thank you, Josh, you begin to point me in the right direction.

  Now, I know just affecting a Trunk port, or general mode is NOT sufficient.  I have to give what kind of package VLAN (i.e. what VLAN ID) are allowed to pass through.

  To do this assignment, I have to take 2 steps. say first of all, the database "vlan" to recognize a VLAN ID in the world, then say that some specific port is allowed to pass through with this VLAN ID specific packages.

  Thus, in order to pass packets VLAN with VLAN ID 18-25 no modified (marked packets in packages marked on) g7 to the g8 to port port, I have to do:

  Console # config
  Console (config) # vlan database
  Console(config-VLAN) # vlan 18-25
  Console(config-VLAN) # exit

  Console (config) # interface ethernet g7
  Console # switchport general mode
  Console # switchport General allowed vlan add the tag of 18-25

  and again for the g8. And if I want to 48 ports to act like that, I have to write this kind of order 48 times right? All the shortcuts?

  Some useful links for me: http://hasanmansur.com/2012/10/14/powerconnect-switchport-modes/

• Why the new version of Adobe flash (20) collapse in my computer and all the paintings are froozen for me?

  I use window 10 64 bit on a pc with 16 GB of RAM and 20 to 32-bit version of flash from adobe and mozilla firefox on the edge of microsoft and google chrome all pages that use adobe flash not working and collapsing.

  Message editado por: borja mc

  

  

  Message editado por: borja mc

  It was suggested that the 64-bit version of Firefox may relieve this problem for you. Which can be found here https://www.mozilla.org/en-US/firefox/beta/all/ . Install with all the default values.

  Since you're on the 64-bit version of Windows 10 that you can take advantage of that.

  The explanation as to why this is happening are in a post from jeromiec83223024 this thread here

  and additional results here: Adobe 20 crashing on Firefox 43

  You should now see two instances of flash player not to run out of process in the Task Manager.

  Hope that helps

  Best regards

• Flash player 18 esr - as it contains all the features of the fp 18?

  With the jump to version of fp 13-18 esr, I'm trying to find information on the question of whether we should do thorough testing on the new version of flash player 18 esr, but it seems unclear to me if the new version of esr is identical to the full version, or if it's just 13 esr with a new number and the last security fix. Does anyone know where to find information about this?

  Hi m2cv,

  Yes, ESR version 18.0.0.232 contains all the features and security fixes. Note full version, for every single version output is available here helps Flash Player | Release notes.

  --

  Maria

• VE20-USB or Bluetooth? ALL THE WORLD?

  Never messed with bluetooth or USB with the ve20.  Today, I bought a motorola usb adapter. Do I need a cable specific bluetooth? Im not sure. I can access my phone as a storage on USB but get an error on the phone saying Cant access files or something (quick pass). But on my computer, I see all the directories on the but not files in one of them.  But they ARE there. I rechecked the phone itself. The reason why I bought this cable was simply to download photos and vids of the ve20 to my computer.

  And bluetooth does not work, niether sees the other. Then stuck there too.

  Any help appreciated

  Thank you

  jt_west

  Can you explain a little more clearly what USB adapter you bought?

  • with the right USB cable you can access additional memory installed on your phone card
  • pages 78 and 79 of your manual

  BlueTooth is a wireless connection...

  • allows you to connect to other BlueTooth devices, such as a helmet, another phone, BlueTooth compatible computer and others.
  • BlueTooth must be turned on in your phone to use
  • pages 79-84 of your manual

  Here's a link online for VE20 Support Pages with additional links to the user's Guide.

  Poko

• Flash for html5 canvas - how to target instances "cloned".

  I have a Penguin object that I duplicate several times throughout a quiz of canvas, html5, with code like this (Simplified):

  function newPenguin() {}

  var clonedBlock = new lib.peng ();

  root.addChild (clonedBlock);

  clonedBlock.x = 100;

  clonedBlock.y = 100;

  clonedBlock.name = "Penguin" + count;

  slideAbout (clonedBlock);

  }

  Whenever a new issue is reached a new Penguin is added to the screen and the 'slideAbout' function it allows to drag around independently on the screen. So at the time wherever you get to q10 there are ten penguns all independently sliding on the ice. Everything works well.

  What I want is, if a question is answered correctly, all these penguins jump up and down both on occasion.

  I can do the jumping animation, but I can not understand, the main script, how target these dynamically added penguins.

  If I had added them manually, I could just have targeted the with the name that you add in the Panel of the label, one as the name for AS3 "instance".

  But when they are added using the "new"lib"above method I can't find a way to get them to hold them. The "name you can add with '.name' doesn't seem to work as the 'instance' name - I just get a js error if I try to use it."

  I hope someone can help me - thanks in advance!

  There are a few methods to achieve this.  It would be to add the penguins to a parent who has children of Penguin and another would be to use an array to store the references of Penguin.

  the last submission:

  this.penguinA = [];

  function newPenguin() {}

  var clonedBlock = new lib.peng ();

  this.penguinA.push (clonedBlock);

  root.addChild (clonedBlock);

  clonedBlock.x = 100;

  clonedBlock.y = 100;

  clonedBlock.name = "Penguin" + count;

  slideAbout (clonedBlock);

  }

  so you want to reference your penguins, loop in your table

  function jumpF() {}

  for (var i = 0; i)<>

  do whateve with this.penguinA [i];

  }

  }

• Fill Flash and margins CC HTML5 Canvas

  Set up a canvas of HTML 5 CC Flash and when I saw in the browser, it offers a padding around her and I want to align to the top left of the browser. Is there a way to set up within Flash or do I have to change the style with in the. HTML file?

  It's pretty easy. Add this code to the first keyframe:

  bodyStyle var = document.body.style;

  bodyStyle.margin = 0;

  bodyStyle.padding = 0;