PowerConnect 5448, how all the trunk of physical ports and allow all the VLAN tags to pass transparently

Similar Questions

• How detect the NFC tags and features?

  Hi all

  Does anyone know how to connect with NFC Tag. I want to apply as if we put my phone blackberry on NFC tag while entering the call. So my request should end this call and send an sms to the caller.

  Please let me know if anyone has an idea about this Protocol of NFC tag. How detect the NFC tags and features?

  Thank you & best regards

  Neeraj Chauhan

  Hi Neeraj

  There is a code library and items at your disposal. An article is precisely tag reading and writing, and there is an application open source in our GitHub repo.

  See the next page for a list of all of our resources for NFC developers:

  http://supportforums.BlackBerry.com/T5/Java-development/NFC-article-and-code-index/Ta-p/1538775

  Concerning

  mwoolley

• PowerConnect 5448, how to restrict DHCP BOOTREPLY messages to a specific LAN port?

  In order to counter the effect of the DHCP server that is not allowed on my Ethernet network. I need to restrict DHCP BOOTREPLY messages on a specific LAN port on which the authorized DHCP server resides.

  I tried to read the section "Configuration DHCP Snooping" of the 54xx User Guide, but does not get a clear idea. This description in the user guide seems rough and intuitive for me to understand.

  'Trusted Interface Définition' help? I think I need feature 'port of trust '. I hope only trust ports 5448 can receive DHCP BOOTREPLY packages, while BOOTREPLY arriving in untrusted ports is rejected.

  

  Daniel finally understand the missing link after an exchange of emails with me.

  I have to add

  Console (config) # ip dhcp snooping vlan 1

  to finally make it work - even if I don't yet use the VLAN.

  See you soon.

• How to stop Firefox playing mp3 files and allow me to save the file

  I've upgraded to Firefox v28. I want to record an mp3 file to play later as earlier versions of Firefox. When I click on the file, it starts playing and does not give me the option to save the file.
  In the Options, the settings of 'application' for the file MP3 is on "save file". The quicktime plugin is disabled.
  The media.windows - media - foundation.enabled is set to false in: config
  How can I restore Firefox behavior to be like the older versions
  Thank you

  That fixed it! Thank you!

• VLAN Tagging (VST) and VLAN native on the same vswitch

  I'm trying to figure out if its possible to put running the VLAN tagging for a vswitch if our virtual machines are currently in the vlan 1 (vlan native) on our cisco switches. I don't know why it's set up this way, but change is not an option at this time.

  Ultimately what I'm trying to accomplish is setting up a group of servers that differ on one VLAN, but under the same vswitch. I'm assuming that VST is what I need, but I don't know if I can simply specify how vlan 1 as the vlan 1 is not marked on cisco switches and my understanding is that VST requires to carry a label.

  Your help is greatly appreciated.

  NuRD.

  With the vSwitch connected to a trunk on the physical switch port, create the port groups and you need only configure the ID then VLAN for the port groups that do not use of VLAN native. See for example http://kb.vmware.com/kb/1004074

  André

• Need help to configure the VLAN on a powerconnect 5448

  Hello world

  I am currently working on 2 switches PowerConnect 5448 but I'm completely lost in configuring VLAN.

  My bow:

  

  My needs are:

  -J' have 2 different networks that need to be isolated in different VLANS

  -I want to port 11-14 to use for network backup, all others must be used for the production network.

  -This 2 networks must pass through the port 48 (fiber)

  How can I configure this kind of network on the powerconnect interface (or via telnet)?

  My understood are the following, I have to create 2 different VLAN tag all ports, switch to safe mode all ports of the entitlement each port to the VLAN voted. Am I wrong?

  How the fiber port?

  Thanks in advance for your help on this matter.

  Since your 2 VLAN need not communicate with each other, you should be able to get this working.

  The easiest way to do this would be to have your production on VLAN 1 and VLAN 2 second network.

  Assign an IP address to the switch with the command IP #.

  Assign a default gateway with the # ip default-gateway command.

  Create a VLAN 2:

  Database console (config) # vlan

  Console (config - vlan) # vlan 2

  Set 11-14 ports to access the mode for VLAN 2

  Console # switchport mode access

  Console # switchport access vlan 2

  Set 48 on trunk or general mode ports.

  Console # switchport mode Trunk

  console # permit trunk switchport vlan add 2

  You should get pretty close to a work environment. You may encounter some problem with VLAN 2 contacting 192.168.1.0, maybe just need to put it up and test.

  Here are a few links to software packages and manuals that can help.

  Firmware.

  http://Dell.to/1tz8tW0

  Manuals.

  http://Dell.to/1yqV4DJ

  Keep us on how will your configuration.

• Dell Powerconnect 5448 a reference on the vlan by default

  Hello

  Just a question.  A Dell Powerconnect 5448 switch will act as a home if its interfaces are configured with 1 interface connection to a primary switch that has the interface is 'access to the interface mode' by default with a vlan?  It will work with all its switches on vlan interface of uplink or would you need to configure both as the trunks to allow access vlan to work and this switch uplink?

  The 5448 is a layer 2 switch, which by default has a VLAN native of 1 with all interfaces in access mode for the native VLAN 1. On the VLAN native all frames are frames unmarked. So now that your uplink to the other switch port, all the info will be sent without label, which means the other switch will receive the unmarked data and then place it in the VLAN that is in access mode. Communication should work this way.

  However, I think using a network connection between the switches. The trunk port is used to connect the devices up-to-date with the switches / VLAN together and allow several VLAN tagged fell on it. Looks like you already have several VLANs on the network, and having a network connection will allow you to expand on it. At the same time everything that is on the VLAN native is always through the trunk to the other switch and will stay on the VLAN native.

• How can I put the Windows XP firewall in a port configuration 'allow all' and only block some ports?

  Without going into the details of why I need to do this, I'm putting the firewall of Windows XP in one allow all the configuration of ports and only refuse some ports I have in a list.

  I train this script via the command-line batch with the netsh firewall add portopening command.  From what I've read, if enabled the firewall denies all traffic and only allows ports with exceptions, so through batch scripts, I opened all the 65 000 + ports TCP and UDP, essentially with the firewall turned on but in a configuration of "allow all the»  I don't deny the 100 or so ports to my list that I want blocked after they are all open.

  This strategy seems to work, but the problem I waited and I now see is that svchost.exe takes 50% of my CPU time, have to deal with constantly these firewall rules.

  "From what I've seen on Windows XP, there is no way to have the firewall ON, and in a configuration of" allow all the "" because the XP firewall may not have defined port ranges, they must be defined one by one.  It looks like Windows Vista or 7 would be much easier because the firewall has got a re vamp of advanced features.

  Does anyone have a suggestion on how to realize this "allow all", deny some' strategy?  I know it's a strange use of the Windows Firewall, so let's please jump in front of a 'why would you do this incredibly stupid thing?"messages.

  Also, if it was the wrong forum (or website) to post on for this kind of question, I'd appreciate a recommendation of a more appropriate forum.

  Hello

  See the steps in the following article.

  How to manually open ports in Internet Connection Firewall in Windows XP?

  http://support.Microsoft.com/kb/308127

• Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Try this:

  Ctrl + alt + delete > bottom left on the Page, click, accessibility > uncheck, magnifying glass, keyboard

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• How to uninstall vista delux home system, and then reinstall system without losing all the programs, files, etc. ?

  How to uninstall vista delux home system, and then reinstall system without losing all the programs, files?

  Hello

  You cannot do a clean install, which is what you hear in your question, and maintain programs

  programs will have to be reinstalled from the original media

  and you will need to back up your files:

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  ___________________________________________________

  You can make a good repair facility

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• How to distinguish the physical interface and logic (subinterface) interface to the Cisco router/Switch?

  Hi Expert,

  How to distinguish the physical interface and logic (subinterface) interface to the Cisco router/Switch? Can you please clarify a formal way for this so have?

  A physical interface is numbered with the same name of the interface when printing on the physical port. For example "GigabitEthernet 0/1" corresponds to port 1 of the 0 module (or the base unit).

  A logical interface can be a subinterface on a routed port and will have a point ("". "") preceding the number sous-interface (ex. GigabitEthernet 0/1.1). It can also be a loop or a virtual interface (on a router this could also include interfaces like the tunnel and virtual tunnel or VTI types). A switch may also have a VLAN logical interfaces (e.g. interface vlan 1) which are used as layer 3 virtual interfaces of type.

• How to export a user instance data and import it into another instance of a directly without storing the physical file.

  Dear all,

  I need your help I need to export data from user a (1 instance) and import it on another an instance without storage on location.

  I used to do as an export of data about the physical location and then import into another instance where I stored the dump file on physical location.

  Now I don't want to follow these method (standard method), is there any way possible means kindly share with me. Thank you very much in advance.

  Dear VA Napoleon,

  Thank you for your immediate response. If it's possible means gives the example script.

• How to find out really currently used physical memory and swap space of hard disk to the virtual computer running?

  Suppose that I'm leaving WinXP hostOS a guestOS. Then a part of this guestOS remain in physical memory and another part is deployed on hard drive in the swap file resp swap partition.

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  Perhaps only a *.vmdk 800 MB / 3GB is really responsible. But these 800 MB could be extended to 2 GB, because the content of these 800 MB is not compressed during load or guestOS drivers allocate additional memory.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Matt

  mattad wrote:

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  The vmdk is not loaded into memory, because it is the drive of the virtual machine.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  Yes, of course not. The memory used by the client is not related to the size of hard but the RAM assigned in the options of hardware reviews.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Open the Task Manager and find a task vmware - vmx.exe or vmware-vmx - debug.exe.

  The swap file should be used if you have chosen to allow that VMware Workstation is authorized to Exchange. The file where swaps to door expansion .vmem Workstation. Search folder of comments.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How diseble the fields all based on button

  Hi.......,
  
  If I press the button I want to disable all the field how
  Here the two blocks is 1. control, 2. control_main
  If I press the control to find control_main button block off all the field how
  Please you know me
  
  concerning
  Maha

  Hello Maha

  1 pls create WHEN-BUTTON-PRESSED Trigger

  
  SET_ITEM_PROPERTY('block_name.item_name' ,Enabled ,PROPERTY_FALSE );
  

  I hope this helps...

  Kind regards

  Amatu Allah

• How to analyze all the data of the particular tag in the xml file

  Hi all

  I have a xml file, who like tags, code, rev_num, type... volunteers. I want to analyze the XML and save all data (code, rev_num...) the unknown tag in a text file. I tried to use a node matching vi, but I do not get the output I have need.attach is my attempt, can someone suggest me or help out me. (Sorry Cant join the XML so I recorded it in a text file.)

  Thank you

  Ankit G

  You must replace the instance of "resource" with "resource [type = 'unknown']." Did you do it?