FlashBuilder: Android/Flex components + full graphical screen possible?

Similar Questions

• Flex components do not work after the upgrade to Flash Builder 4

  I just bought Flash Builder 4 and imported my Flex Builder 3 project. Everything worked except my Flex components that have been created in Flash Professional using the Kit of Compoent Flex may not appear at all in my Flex application. The components have been created in Flash CS3 and published to a CFC. I even tried the upgrade to Flash Professional CS5 and publish again, but that did not help. These components work in Flex Builder 3 with Flex SDK 3.2. Anyone know why they do not appear in Flash Builder 4 with Flex SDK 4.1 and AIR 2.5 SDK? I need to work with AIR SDK 2.5 so I can compile for Android. Thank you, Ryan.

  P.S. when I say that they are not I mean that they are not visible in the currently running application. Flash Builder is find in the good SWC because I instantiate components in my mxml file and it compiles without error. -Ryan

  I downloaded the SWC and looked inside.  It is not related with Flex 4

  version of the FCC.  I think you need to check your configuration.  The CFC

  would have a substantially larger size once you get it right.

• blue screen "possible problem with SPCMDCON. SYS

  all about office went< only="" program="" available="" and="" showing="" is="" mcafee=""> bed blue screen "possible problem with SPCMDCON. SYS '.  Hard drive reads accurately but very little available. Get pop up of the AV PROTECTION ONLINE DECLARING PAY 59.95 AND we will solve the problem. also the problem States is due KEYLOGGER ZEUS, please help

  Hello

  1. are you able to boot to the desktop?

  If you are able to boot to the desktop, run the antivirus scan and then run the System File Checker.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If you are not able to boot to the desktop, please start the system in safe mode and follow the steps mentioned above.

• My C drive is full, it is possible to expand the C partition?

  My c drive is full it is possible to extend the partition on the c drive?

  Hi DAVIDLVE,
   
  -Do you have installed the operating system on your C drive?
   
  Here are a few articles that will guide you through the process to extend a partition:
   
  How to extend a data volume in Windows Server 2003, Windows XP, in Windows 2000 and in Windows Server 2008
   
  How to use disk management to configure basic disks in Windows XP

• Hello, I have a problem, after the effects of the charges or starts with a full black screen. Help, please.

  after effects 5.5, mac pro

  After starting with a full black screen-edge. Then I have to force quit. Thank you

• Passing VARs between flex components

  Hello

  How can I pass VARs between flex components?

  
  I try: public var TypeGaleria:String = 'Fotos';

  but does not work!

  You can communicate between the application main and components, as well as between the components using 'mx.core.Application.application' (or parentDocument and parentApplication), but which is considered bad practice, as it results in a loosely coupled application.

  Import mx.core.Application;

  public var app:Object = mx.core.Application.application;

  myComp1 = app.myComp2.myVar;

  For a loosely coupled application, use custom events to pass data autour. Here's my message to Flex cookbook on the use of the custom in a wizard based MVC events:

  http://www.Adobe.com/cfusion/CommunityEngine/index.cfm?event=ShowDetails&ProductID=2&postI d = 11246

  If this post answers your question or assistance, please mark it as such.

• Targeting parents in Flex components

  Hello
  
  I'm pretty new to Flex (< 2 weeks), and I started to build a new site. I basically created a hierarchy of mxml components and actionscript classes. I use the following classes for this issue:
  
  As a class: store.classes.Products
  Parent (Flex MXML Component): store.visual.main.main_products
  Pane view 1 (Flex MXML Component): store.visual.main.products.products_list
  Pane view 2 (Flex MXML Component): store.visual.main.products.products_details
  
  
  I'm trying to figure out how I can target the parent, particularly the ViewStack component, to create a method in my class of products that can be used to change the views of two children; the list view and the details view.
  
  I'm really looking for an explanation of how I can communicate between Classes and parent/child data with Flex components. In Flash, I could use something like _root.main.products_main. ViewStack.selectedChild = productObject.product_Level; to change the battery.
  
  Help would be greatly appreciated...

  You start with the passage of the lingo of the Flash to Flex you can think of what used to be _root as an Application.

  So if you wanted to reach all the way to the top, you should do something like what I have attached. I do not really recommend always trying things in the scope of the Application well. It adds a lot of unnecessary code if your structure is considered to be good enough. If you want to spend store.visual.main.products.products_list to store.visual.main.products you can do this.parentDocument.selectedChild = this.parentDocument.whatever;

  Hope this helps you get started in the right direction.

• Flex components on a project AS 3.0 in Flashbuilder 4?

  Hello guys,.

  I'm a little torn here. I have two Flash Professional CS5 and Flash Builder 4.

  As I got more and more developing Actionscript 3.0, I'm trying to find my land on which program I would be better to use.

  I like the Flash Professional, but find that for the moment, I don't have much use a timeline, I prefer all code on stage and I miss the code window and caregivers tools that Flash Builder is intended for programmers.

  Flash Builder 4 by choosing and learning Actionscript 3.0, I'm done trying to create a new Actionscript 3.0 project.

  Then it dawned on me that I'm missing on all components flex (like for example the TextInput control) which are at my disposal when starting a Flex project.

  Is there a way to get access and appropriate use of these components, while working in Flash Builder project Actionscript 3.0?

  Another option - I hear say you - would be to get into Flex and MXML, which scared me a bit, but I just put my mind to learn AS 3.0 and feel bad to the abandonment of these plans already to learn another language immediately?

  Tips and advice are welcome so more.

  Thanks for reading,

  Kind regards

  Bert

  first of all, under your project in FB actionscript3, go to project properties / and add a reference to the source directory component on the tab of the CBC as opposed to the library (SWC) tab. I tried with Flash CS4, but I also have CS5 I was not looking for with.

  Here's my link at least in the src directory (which contains fl etc.)

  C:/Program Files (x 86) / Adobe/Adobe Flash CS4/Common/Configuration/component Source/ActionScript 3.0/User Interface

  screenshot:

  http://trumpboston.com/graphics001/srcpath.jpg

  test source code:

  http://Pastie.org/1771742

• Flex PDF/JPEG graphics conversion

  We use Flex in our application. However, we need a way to convert a PDF/JPEG of Flash components (or a SWF in full).
  
  We have created a Flex application that allows users to create their own maps and we will have the possibility to generate a single SWF file for each graph (using the command line compiler).
  
  Is there a way (or ideas about a possible) do * any * these things? --
  -Convert a static swf in PDF
  -Convert a static SWF file in JPEG, PNG, TIF, etc
  -Take a 'screenshot' of a Flex component
  -All that would do the job
  
  I looked around for a product that would make all the foregoing, but I can't find anything that could be accessed programmatically (i.e. called via a script).

  Thank you to both of you! Exactly what we were looking for. I am try it now and so far it's good. Flex is going to be incredible for us - this will make our development cycle much shorter.

  I wish that there is a way to avoid the cost of sending graphic back to the server and the server can send back. However, it is still very convenient, especially with the built-in features of PNG conversion. Has Adobe considered adding PDF conversion utilities (in order to keep selectable text & etc..)?

  I can't wait until the final version is available so that we can buy it and get rid of this crazy "Flex Charting Trial" watermark on the charts. It is much more difficult to sell executives on a product/process when the demos have ugly watermarks all over, especially since the watermark isn't scaling and our one inch graph thumbnails each have four-inch watermarks.

  In any case, it's exactly what I needed to know. Thanks again.

• Satellite A300 - 25K - graphics upgrade possible?

  Hey there,

  Sorry I'm a n00b, so forgive me if it has been requested before.

  I have a
  + Satellite A300, Dual Core T6400 @ 2 GHz +.
  my graphics is a
  + ATI Mobility Radeon 3650 + and it is NOT ENOUGH... especially for the full HD video editing

  Q: + it would be possible to upgrade my graphic + (not sure if it's a chip or card)?

  Please read and respond to, your help is greatly appreciated

  tOm

  Hello

  Please read here http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13

  As you can see, Cpu and Gpu upgrade is not a good idea. Even if your motherboard can handle it but the Bios is not pre-tested for her. In any case, you must contact the Asp (SAV), they can tell exactly whether it is supported or not.

• Update full hd screen want k113nl

  Hallo,

  I bought a HP ENVY k113nl (nvidia gtx 850 m. screen hd ready) and laptop.

  I am not satisfied with the quality of the screen and I ' would like to know if it is possible to upgrade to a full HD.

  If so, I bought a specific model?

  Thanks a lot for your answer.

  @donellus

  In response to your request, here is the manual for Maintenance and maintenance for this notebook series:

  HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC HP ENVY Notebook PC Maintenance and Service Guide of m7

  In this guide, here are the panels taken supported for the 15 "model, two of which are HD

  15.6-inch, non-glare, HD, WLED for models of touch computer with bezel 763575-001
  15.6-inch, BrightView, HD, LED to models of computer-screen not touch 763581-001
  15, 6 - in, anti-reflective, Full HD, WLED for models of touch computer with bezel 763576-001
  15.6-inch, BV, Full HD, LED for models computer touch non-ecran with bezel 763582-001

  You can view the guide for more details in the section on how to replace the Panel and at the beginning of the guide in the Product Description, which shows once again the different configuration options for 15 and 17 models.

  I hope this helps.

• Upgrade of 5737 Dell 17r full HD screen

  Hello

  My laptop has a screen of lg 1600 x 900. I would like to ask if it is possible to move to a screen full hd model 5737se 17r. And also can I update a backlit keyboard?

  Thanks to you all!

  Hi JIMARAS001,

  Thank you for the update.

  Well, if you provide me the serial number, I can check the keyboard for you info. Or provide me the keyboard manufacturer. You can check the configuration of the system here - http://dell.to/1n3X2po - enter the service number and check the original configuration of the system.

  For the screen - Yes, ideally it should be a swap of right. On-site parts-people - there is only a single available manufacturer FHD - http://bit.ly/2e9aVX7.

  For some models come with no touch and when needed to be upgraded to the Assembly of the touch screen, then only the complete kit needs to be replaced - such as the lcd cable, bezel, webcam, backcover and hinges with touchscreen lcd display. However, for this model, this does not apply.

  If you need help with the replacement, please contact our team according to the link in my previous post.

  Let us know if you have any other questions.

• Is there a way to map a tag in flex components in multiple directories?

  I posted this question on other forums with nothing is, so I'll give this one a shot. Given a module or a flex application, you can specify a custom like this xml namespace:
  
  "" < mx:Module xmlns:mx = ' http://www.adobe.com/2006/mxml " xmlns:custom =" custom.namespace. * ">
  
  We can then refer to the mxml components in the directory/custom namespace / using the custom tag. For example, if I have the Custom1 and Custom2 components in the directory/custom namespace, I can refer to them as follows:
  
  < custom: Custom1 / >
  < custom: Custom2 / >
  
  Is it possible to map several directories on the same tag? In other words, if I have components in a subdirectory of / custom, as custom namespace / workspace names/sub with the SubCustom1 component, is there a way to change the flex document so that the custom tag can refer to SubCustom1?
  
  Note that a solution I found was to add a new tag for each directory (e.g. xmlns:custom.sub = "" custom.namespace.sub. * ", then:")
  
  < custom.sub:SubCustom1 >
  
  This solution seems to be a hack, however.

  This question has been answered here:
  http://www.ActionScript.org/forums/showthread.php3?t=199432

• Flex ActionScript projects. Flex components

  It is possible to create projects Flex 3 ActionScript uses Flex 3 components/containers?
  
  The goal is to get the same result with MXML, only using only the classes ActionScript in the whole of the project. So far, using Flex Builder 2.0.1 I tried to create an ActionScript project with the main class extending mx.core or mx.containers components. I have reproduced the same source/SWC settings project as a project MXML, but definitely got errors when compiling.

  The errors you get are not compilation errors, but errors of execution. You are getting these errors because extending actionscript components Flex requires more code that you have currently, MXML take care of that behind the scenes.

  To see the action script code that is generated when you write a simple mxml Application button to use the option-keep-generated-actionscript = true duing compilation and the product action script is stored in a folder called generated.

• More high graphics card Possible for early 2009 Mac Pro

  As the title suggests, I have an early 2009 Mac Pro with 12 GB of RAM.

  I want to update my graphics card to something better and I have no idea of what I put in the card. Ideally, I would like to put the last possible graphics card that is compatible for this.

  I don't know what I would look for PCI or PCI - e and what diet I would look for that would support such a computer "arcane".

  Any advice would be greatly appreciated!

  Best wishes

  Sergio

  the 2009 mac 4.1 pro can be upgraded to a number of current spare cards from Nvidia and AMD, but in many cases the cards require custom flashing of the Distributor and custom drivers. You need to buy a card with a distributor of mac because versions "Windows" of these cards will not work out of the box and OS X will not support without 3rd party drivers. This procedure is not recommended by apple that would rather you buy a new mac pro and again I want to say something for $5K, which offers the latest GPU is already 3 years old.

  research on the Web "Mac Pro 4.1 GPU" for more details.