flashing mouse cursor somewhere a little different at the entrance where the screen is actually

Similar Questions

• Satellite Pro 6100: cursor moves out of control on the screen

  Hey guys,.

  I'm seriously going crazy right about now... my problem is the following:

  I have a Toshiba Satellite Pro 6100, Windows XP Professional with SP2, memory: 512 MB.

  About two weeks ago my cursor began to move up and down whenever I pressed the space bar. It has gotten worse since. My cursor moves out of control across the screen (there are usually in the upper right or lower left) and I can not recover. I know for a fact that it has nothing to do with my external mouse (optical), because this problem also occurs when I use my pointing device. Even in safe mode.

  The thing I've tried:
  Ran Spybot: Search and Destroy
  Ran Adaware
  Xoftspy RAN
  A ran Symantic Antivirus 10 (complete analysis of the system in safe mode)
  New keyboard
  New motherboard

  Nothing helps. I'm this close to format my pc. Does anyone have a suggestion of what to do?

  Thanks in advance!

  Hello

  I put t he understand. You have changed the keyboard and the motherboard, but you did not recover the OS with the Toshiba Recovery CD.
  The first procedure that you should do is the new installation of the OS before you change or replace anything on the laptop.

  Unfortunately, it is not easy to say why it occurs. A friend of mine has a similar problem with the cursor. The cursor has jumped on the screen and it was not possible to open applications. It has (or service) resolved with the replacement of keyboard.

  If the new installation OS doesn't fix this strange cursor, so I recommend you contact Toshiba.

• flashing mouse cursor as occupied permanently

  Hello

  I have a laptop sony vaio 17 ".

  yesterday, I did some update "VAIO Care". After that my mouse cursor is keep flashing with circle occupied.

  It shows the normal cursor when I hit something or that my mouse is on the line.

  but every time that come from my mouse on its default icon begins to Flash

  a few months back I am facing same problem so I just restore.

  Please help me solve this problem

  For me, it was the center of game nvidia causing flicker.  I killed the services of updated nvidia and it worked.

  This announcement just in case anyone else gets around the internet looking for an answer.

  NVidia GeForce GTX 275 Windows 7 card

  I had the same problem and disabled Nvidia Streamer Service and finally stopped :) flicker

• Why can't I find the same theme of mouse cursor that I used it since the beginning of the 1990s on each upgrade of computers I've had since then with the exception of Windows 7?

  Hi, I have used the same system of slider for years and had no problems to find on the Net, or put in my computer over the years, except for this new.  It is the set of mouse cursors when the sliders are all the mice for different functions.  There are other sets in the package, including a dance theme and a theme of Rameau, but I do not remember the others included.  If anyone can help find something similar, I would be very grateful that I HATE the "stuff" regular, ordinary! Thank you

  Hello

  The only thing I can suggest would be to keep looking for a compatible version of Windows 7 that will meet your needs. Compatibility with Windows 7 is the responsibility of the software developer.

  There are tons of these cursor there plans.

  Edit: More information.

  It seems that the standard cursor file ( .cur ) w will work under Windows 7. How to install these may be different from previous versions of Windows. Here are some links with precision.

  How to install & customise cursors in Windows 7 | Windows Club:
  http://www.thewindowsclub.com/how-to-install-customize-Windows-7-cursors

  Top 10 of the best mouse for Windows systems. 7 tutorials:
  http://www.7tutorials.com/top-10-best-mouse-cursor-schemes-Windows

  Eye of ox mouse - homepage:
  http://archive.msdn.Microsoft.com/Bullseye

  Search for Windows 7 cursor plans:

  http://www.bing.com/search?q=%28Windows+7+and+cursor+schemes%29&QS=n&SK=&form=QBRE

  Concerning

• The mouse cursor changes to hand instead of the text tool when I hover over the text.

  Normally whenever I have fly over the text in an e-mail or on the web, in order to highlight to copy and paste, the mouse cursor becomes a text tool.  However, now every time I have fly over the text, it remains on the hand tool.  Whenever I click on the mouse button, there just cause the hand to shake.  I can then move the page and everything I want to get off.  The only problem is, I want to highlight the text with the text tool, not handle the page with the hand.  My question is how to change the mouse cursor to get the text tool when it flies over text?

  Normally whenever I have fly over the text in an e-mail or on the web, in order to highlight to copy and paste, the mouse cursor becomes a text tool.  However, now every time I have fly over the text, it remains on the hand tool.  Whenever I click on the mouse button, there just cause the hand to shake.  I can then move the page and everything I want to get off.  The only problem is, I want to highlight the text with the text tool, not handle the page with the hand.  My question is how to change the mouse cursor to get the text tool when it flies over text?

  I wonder if this will help...
  Right-click on an open office space > Personalize > mouse pointers > pointers tab, click on use default > apply/OK

  t-4-2

• Cursor starts to move all over the screen. How to stop it?

  Original title: cursor/mouse creeping

  I saw it everywhere and it could be here. How can I get rid of the 'MOUSE CREEPING SYSDROME". It is started without any particular reason you cursor around homelessness to the screen you upwards, downwards, means on the side, that you do not? Anyone know of a cure.

  Hello

  Visit the link of the manufacturer HP and select 32-bit or 64-bit of Windows Vista you have.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3644726

  Try to download the

  HP Enhanced Multimedia Keyboard Driver Update

  2008-02-13, Version1.0.7.1, 5.71 M

  HP Enhanced Multimedia Keyboard Driver update fixes an issue with incorrect displayed language

  Try the following steps to check the edition of Windows Vista you are using:

  1. click the button start , enter the computer in the search box, right click on computer and then click Properties.

  2. look under Windows edition for the version and edition of Windows your PC is running.

• my mouse works correctly, it moves all over the screen on its own

  It started this morning very well, then unexpectedly, he starts slowly his way around the screen that I have never had this before, I use a trackball mouse, I already tried rebooting but also tried another mouse and even tried just unpluging the mouse and pluging it back

  Have you tried to use canned Air to clean the mouse?

  Using the uninstall/reinstall driver?

  Is the mouse still under warranty?  Contact manufacturer for a replacement

  There are nearby facilities that could conflict with the mouse?  Router, cell phone, phone?

  Yet away from the system.

  Here are links to support Logitech on the same issue

  See the latest response/resolution on the first thread.

  http://forums.Logitech.com/T5/keyboards-and-keyboard-mice/erratic-mouse-behavior/m-p/325613 
  http://forums.Logitech.com/T5/mice-and-pointing-devices/erratic-MX-performance-mouse-issues/m-p/711968

  http://forums.Logitech.com/T5/mice-and-pointing-devices/anywhere-MX-cursor-moving-on-it-s-own/m-p/663284

  http://forums.Logitech.com/T5/mice-and-pointing-devices/bought-a-Logitech-MX620-wireless-laser-mouse-erratic-mouse/m-p/344362

• Mouse click is not what is on the screen in Windows 7 large text format

  It is a strange question, we discovered. We use Windows 7 Enterprise, and some of my colleagues have changed the resolution of the screen in LARGE print (right click on desktop > screen resolution > make text and other items more or less > Larger - 150% > Apply). When they do this and try to use InDesign CS5.5 (7.5.1), the mouse is essentially useless in InDesign. When they click on something in the application, it does not at all or does something different. What we have deduced, is that it is to show an enlarged version only visual of the interface, but the mouse itself is always clicking in a smaller version of the text of the request that our eyes cannot see. This occurs only with InDesign - not Illustrator or Photoshop.

  Everyone comes through this and if so, no work around?

  It is a known problem. Don't use an Aero theme or set the font size to 100%.

• Shows scrolling differently on the screen/monitors of different sizes

  Hello

  I use DW mx 2004. I would like to know the following:

  -How to make scrolling of this doc fullness show any monitor or screen view it. I have the

  -I would like to know how to have a side table, while it does not move. It would be separate from the main table, but on the right.

  I hope this make sense...

  is attached to the web page and I'll post the code here as well.

  Akaya00 wrote:

  -How to make scrolling of this doc fullness show any monitor or screen view it. I have the

  Is not possible. The rendering of HTML page is dynamic and it is normal that it looks different at different screen resolutions, in different browsers,... the different operating systems. If you have a paragraph or a line of text in the view, use anchors in the code to move immediately to them.

  -I would like to know how to have a side table, while it does not move. It would be separate from the main table, but on the right.

  Create a DIV element and set its position to be fixed or static. Please see the help or a reference site on the internet for CSS style definitions and attributes.

  Mylenium

• Different unlock the screen for incoming calls?

  This weekend, I noticed that my unlock screen differs for incoming calls. I admit, I was in the cardiac ward at the hospital, but I'm now at home and it's always the same. Instead of throwing away them from side to side, they are upstairs and downstairs. It still works the same, but the layout is different.

  Did you perhaps install an app that does this and you don't know that he had this feature?  I think it's kind of cool.  I want my phone to do.  Thanks for sharing the photos too.

• The display is a little big for the screen, and I can't seem to shrink! Miss me some of the features of the browser page?

  The full Firefox logo is missing the upper part of the logo at the top left and the characteristics of the side.

  You are using the full screen? Press F11 and see if they come back

• Can I use a symbol animated acting as a mouse cursor?

  Hello
  I would use a lively symbol dashboard (a magic wand blinking) as my mouse cursor (hide the original cursor) which remains on the scene all the time at some point in the timeline panel and when clicked on one area reactive, goes to a different mount point where the symbol are acting more like a cursor of mouse. I used the following code suggested in the thread following YOSHIOKA Ume
  Re: How I got a lively symbol follow the coordinates of the cursor when you click it?
  

  1: create a symbol called "Symbol_1".

  
  2: Add this code on Symbol_1 - Timeline.complete.

  //delete this instance when timeline complete. sym.deleteSymbol();

  
  3: Add this code to document.compositionReady.

  //on/off mousemove event handler method

  sym.$("Stage")  

  .mouseover(function(){    

  sym.$("Stage").on("mousemove",draw);  

  });

  //create instance of Symbol_1 on stage.

  function draw(evt){  

  var instance = sym.createChildSymbol("Symbol_1", "Stage");  

  instance.getSymbolElement().css({    

  position:"absolute",    

  top:evt.clientY,    

  left:evt.clientX   });

  }

But the problem is, the symbol is being repeated/drawn one after another according to the above code, which I don't want. Changing the cursor using CSS requires a URL of a image file, not a symbol inside EDGE as it seems. How can I get back the normal mouse cursor in another point in the timeline (and go back to the animated symbol mode again if needed?). If I click on another hotspot element on the stage, do I actually click on the attached symbol as a cursor? Or the hotspot?
Also, how can I put a constraint on the cursor so that it stays within a certain rectangular area smaller than the stage?

A suggestion is much appreciated.


 


  Here's an example, I had to move a symbol like a mouse cursor and play a different part of the chronology of symbol based on the user action.

  mouseCursor.zip - Google Drive

  Constraints the symbol of the stage space, check for x and y values in the case where the callback function before you move the symbol.

  To return to the normal cursor redefine the css on default

  ex: sym.getSymbol('Stage').getSymbolElement () .css ({'cursor': 'default'});

• Zoom hides the mouse cursor

  In Captivate, I added as well a zoom and a cursor in the same blade. The zoom area hides the mouse cursor, which is a problem because the idea of the zoom area has been to highlight mouse click! Yes, the mouse is above the zoom area.

  My idea is to have a small size video, with zooms on the areas I want to talk to.

  Hi again

  Okay, so it looks we are hurt to understand what you want.

  Initially, I assumed that you were unhappy that the width or the height does not reflect changes in the frame on the right for the same area.

  Am I right to say that you want to see the following behavior?

  Suppose that you have inserted a zoom area. The Zoom destination is located at 200 x 200 pixels. The Zoom area is set to 100 x 100 pixels. You change the area of Zoom 100 x 50 pixels (effectively reducing the width or the height of 50%. So, you want to verify that the Destination of Zoom is also affected by 50%. If the new Destination of Zoom and then automatically might change 200 x 100 pixels.

  What are you willing? If so, outside calculation methodically and configure manually, there is no way for that to happen. You (and those who want to achieve) must submit a form would ask.

  Until then, your best bet is to zoom in an image and not a region.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• No cursor on the screen to connect to the start or restart

  Hello, my missing cursor problem is a little different from others, I have not installed VMware, or use a wireless keyboard/mouse. And happen randomly when using the laptop. Also the alarm clock is correct because I only need to enter a password, don't choose between accounts.

  My 13 "mid 2012 retina not MBP was having no problem connecting with 10.11.1. But when I upgraded to 10.11.2 I started having a problem. After that my lap top boots and I just login/password page, there is no mouse cursor for me to click on the user account icon for the password box. This only happens at the start or restart. It occurs only if I got my MBP in hibernation for a few hours and restarted (I run Onyx to clean and a restart is recommended), but now it happens if I had turned it off overnight.

  If I close the lid and put it to sleep for 5 to 10 seconds, and then reopen the lid. I get a black screen for about 5 seconds then the normal login screen returns with a slider and I can connect normally I remember once having to close the cover once more.

  I 'fix' this during a few days by turning off bluetooth in sys. Pref. For some reason, upgrading to 10.11.2 re-enabled bluetooth. But a few days ago the missing number of slider reappeared.

  Today, I tried something different. I used the trackpad to drag the top slider of 'invisible' to the left corner where he usually is at the start and crept above where to seat my account icon. I guessed correctly (had) and was able to click the icon cursor haha. So connect is not buggy, just no cursor.

  If this sounds familiar to anyone or anyone has any advice, I would really appreciate it. I prefer not to do a clean install. Maybe safely remove a demon plist or launch work? Thank you!

  Same problem on a MacBook Pro (15-inch, mid-2012).  El Capitan 10.11.3

  No solution, but the problem for me is very sparatic and doesn't happen very often.

• Tecra M5: Moves the pointer of the mouse to the corners of the screen - cannot be moved

  Had this problem intermittently on my Tecra M5. The mouse pointer starts to crawl toward the edges/corners of the screen, then picks up speed quickly, he will bring back zipper in the corners and no amount of mouse movement. happens if I am rooted in a docking station or not. have tried on many mice with the same effect. Will and without explanation.

  Also tried various re-boots, changes to the pointer settings in Vista. Everyone knows this?

  One of my friends had a similar problem. Without a serious reason, the mouse pointer moved at the edge of the screen and it was not possible to control the mouse cursor.
  Finally, EPA has replaced the keyboard (possibly the touchpad too don t know exactly) and this fixed the strange cursor movements

  Then maybe you should contact the ASP in your country and ask for help.

  Best regards & good luck