Flashing the backlight with iPhone 5 s

Similar Questions

• Cannot Flash the BIOS on Satellite L500 due to low battery

  Hey all,.

  Obtained as Satellite L500 (PSLS0A-084002) here. I have the battery not charging issue and everything what I find point to an update of the BIOS.

  Of course, there is a new BIOS for download from the drivers of laptops. So I have the file WinPhlash "sl500 (mv) _bios_w210.exe. However, by running the fact falling before flashing the BIOS with an error number: 144.

  It is because of the battery is bellow 10% charge however I can't it above 10 percent fee that the laptop does not recognize it.

  There must be a way of to WinPhlash running without check. I read that you can run it with the "/ forceit" switch and who will be ignoring the error, but that was for some time and it seems WinPhlash have changed this as she always spits the error.

  I read running back help but after creating a boot cd back, he claims the exe cannot be run from BACK (ffffuuuuuuuu!).

  Any help appreciated. Thank you =).

  Maybe it sounds silly now but there at - it something serious, why you want to update the BIOS on your machine? I mean if everything is OK, why do you need new BIOS?

  In any case, I'm don't know if this will help but please try to remove the battery and check if the update of the BIOS starts if your laptop works on AC only.

• Satellite M40 - how to reflash the BIOS with the same version?

  Hey guys read the forums trying to find a solution for my problem. After that I reformatted the hard drive with the original CD every time you restart computer that wifi will go down, even if the switch is turned "on" and will not come on until you turn off manually and powered.

  The last time I fixed it by the BIOS update (newer) 1.70 this time I can't reflash BIOS since it's flash-based window and it verifies that I have 1.70. I reinstalled the latest drivers and software for all. I have searche too many old BIOS files if someone older mind Sending via 1.60, 1.50, for this computer would be nice greatrly it is M40 (PSM40E), it is the model with the video card Nvidia 6600.
  Or any idea how can I reflash 1.70 again?

  Thank you, Daniel

  Hello!

  Flashing the BIOS with an equal or older version is not possible. Therefore, you must go to an authorized service provider.
  Technicians can relfash with a same or older version.

  If you don't know where is the nearest ASP you should look on the Toshiba site. There you can search for it.

  Good bye

• Reading/Controlling Arduino with iPhone Dashboard

  Hello

  I'm new using Dashboard OR so please bear with me.

  I'm working on the installer is a TCP/IP connection between my computer and an Arduino with WiFi shield. The computer has a VI that connects to the Arduino, currently the Arduino is the server and receives data from sensors that it displays in graphics and medium. VI also adjustable a yellow and Red limits for data from the sensor, and when the latter is reached, a stop test command is sent to the Arduino.

  I am trying to add a smartphone to the current configuration. Initially, I had planned to write an application with a custom telnet but I thought that the dashboard could better work (such as graphics display). I downloaded the dashboard for iPhone but were unable to establish a connection to the Arduino when it is not connected to the computer VI. The connection itself has no effect on the side of the iPhone app shows continually links and nothing else. The only way I know that a connection has been established, it's that the Arduino is defined in the light of an LED only when connected.

  I have three major concerns are:

  1. are there any documents to be able to use the dashboard with iPhone? If not, is the iPhone Dashboard more limited than the dashboard iPad for which there is of the documents? I have not been able to find a lot of documentation for dashboard with iPhone, iPad only (http://www.ni.com/white-paper/13757/en/).

  2. relying on Q1. is it possible to add controls to the iPhone (I have to be able to send a command to stop the phone if the installation should work) of dashboard?

  3 should. the dashboard be connected to a computer running a VI? My original plan to was to directly connect to the Arduino. skip the command stop via the computer, it is doable but diverted.

  Hope to hear from you,
  Yusif Nurizade

  The version of the phone has 'charts', but not 'graphics '. In LabVIEW terminology this means that you can see the latest data and history, but history is stored locally in this table (not the server). You will see that the history of data points that your client has received. In the version of phone we also do support the scalar data types, which means that you can see only one of the data point. Basically, this means that it is not enough for streaming of signals. The dashboard will update the table by adding a single fixed-rate data point (as described here: http://digital.ni.com/public.nsf/allkb/DF058CF63BC25E29862579EB0062E828). No matter what the server made the dash displays only data to the fixed rate, and it will drop all intermediate values arriving between the last update and the next update. It should only be used to see a preview of the last value and certain values passed.

  There are several ways to see the differences between the versions, but perhaps not in the form that you are missing. First of all, this page describes the data types supported for each version:

  http://digital.NI.com/public.nsf/allkb/D9B247551BE7F46A8625795000552CDE

  This page shows the new features available in version 2.x (which is available on the tablets):

  http://www.NI.com/white-paper/14033/en/

  Whatever it is described as a new feature on this page is not available in versions of phone, which are based on the 1.0 version of the application.

  "2. my current setup is Arduino as the server and the client computer. I have to back to allow the phone access to the data on the computer? "You said that theDashboard does not need to delve into TCP/IP at low altitude, so I wonder if there is a way to connect to the VI computer without involving the Arduino or reversal of the client-server relationship.

  I'm assuming that the data that you actually care comes from the Arduino, so at some level, the Arduino could still be considered a server. The concept of client and the server gets a little fuzzier when you introduce an intermediary, i.e. what would be your LabVIEW application. From the point of view of the Arduino the LabVIEW application would be a customer (it connects to the Arduino). From the point of view of the phone the LabVIEW application is the server (the phone connects to it). How your application is connect to the Arduino using its Protocol, acquire all relevant data, convert it to an appropriate data type and publish it in a way that is accessible to the application of data dashboard (i.e. a shared variable or a web service).

• Lenovo 3000 N500 4BG, flashed the BIOS and cannot start more!

  Hi there, bought a N500 yesterday I was updating drivers, everything worked ok and then I tried to Flash the BIOS with BIOS 6get12ww on site (today) and then after a stop, nothing works anymore.  It ends with the Blue error screen Windows.  I tried many ways to get the system up, so I can copy the old BIOS from HDD (WPHLASH seemed to make a backup before flashing), nothing works.  None of my Linux can start the machine, they are all stop in the middle of the process, Linux Mint starts, but the screen is not readable.

  Also, WinXP and Lenovo CD may not start in windows or the recovery console.

  So, how can I get a copy of old BIOS, or how I can recover from such a problem? No floppy drive, nothing can read hard drive (no CD or DOS or Windows Flash boot floppies could reach the hard drive).

  System has 4 GB of RAM, 250 GB drive HARD and cpu T3200.

  Help, please.

  People, problem has been found and resolved.

  It seems the old BIOS flashing, BIOS setting has changed the HDD SATA type was changed to something other than ID and correct that, regardless of the type of BIOS resolved the problem and the system works now.

  Paymaan.

• Is the new lightning-> adapter Jack works with iPhone 6?

  Is the new lightning-> adapter Jack works with iPhone 6? Or is it only compatible with iphone 7?

  Hello

  It is also compatible with the iPhone 6.

• The T-mobile iPhone 7 would work with all sim cards in the world?

  Hello

  I've been to order/buy an iPhone 7 since the US site and there FREE no. SIM OPTION!

  Currently I do not have any sim on contracts in the United States. I take this iPhone abroad, in Asia, and use it with the SIM local I'd be living here.

  SSO, I wanted to ask you if I choose the option from T-MOBILE out of the 4 options of sim, would the iPhone 7 work perfectly without a sim card and then work perfectly in ALL COUNTRIES in THE WORLD WITH ANY SIM CARD?

  Thanks yo

  Yes, about as long as the cell service supports the type of SIM card used in the iPhone. If you pay the full price for the iPhone T-Mobile, it is unlocked.

• The EarPods come with iPhone 7?

  The EarPods come with iPhone 7?

  Hello

  Yes - iPhone 7 comes with EarPods with a lightning connector.

  It also comes with a lightning to 3.5 mm Jack adapter, so that the EarPods can be plugged into a Socket 3.5 mm on another device, if you wish.

• Airpod will come in the same package with iPhone 7 in October?

  I heard they arrive in October, but they will come with iPhone 7 in the same package? I will be able to choose between Airpod and EarPods?

  Hello

  No - Airpod are a separate purchase.

  EarPods (wired, with lightning connector) are provided with the iPhone 7 and 7 more.

• The AirPod are compatible only with iphone 7? Or we can use it with more than 6 s... or any android device?

  The AirPod are compatible only with iphone 7? Or we can use it with more than 6 s... or any android device?

  Here are the tech specs: http://www.apple.com/shop/product/MMEF2AM/A/airpods

  They are bluetooth devices, so they work with the iPhone 5 or more.

  See you soon,.

  GB

• My iPhone 6 loads very slowly and sometimes it takes like two trials for the symbol with the lightning to appear. I think he might have a problem on the port of loading

  My iPhone 6 load very slowly. And sometimes other cables works instantly on my iPhone unlike my sister who has the same phone as me. My sister does not have this problem with our cable. Also the battery becomes low too quickly.

  In the last months, I use as a class a lightning because here in the Philippines, original iPhone cable cables look like $25. My sister also uses the same cable as me but she has no problems

  How to fix this please? Can I go to any apple centre and check my phone to see what happened?

  Hello

  Follow the steps here, including the verification of the charge for debris socket:

  If your iPhone, iPad or iPod touch won't charge - Apple Support

• iPhone 5s stuck on the loading with the apple logo bar

  my iphone 5 s is currently blocked on the loading with the apple logo bar, my home button does not work (I normally use assisstive-touch), ive tried connecting my phone to a laptop and then connect to itunes, but when I connect to itunes it say «to allow access, answer on your iphone» I don't know what to do and need my phone. Help, please.

  You must get the repaired Home button in order to connect to iTunes to sync or restore data.

  Help here > repair - official Apple iPhone Support

• VZW iPhone is unlocked? Means it can be used with a SIM card, anywhere in the world with any other SIM card from another provider, including the United States

  VZW iPhone is unlocked?

  Means it can be used anywhere in the world with any other SIM card from another provider, including in the USA?

  Yes, only bought it for full price directly from Apple.

  Buy from anywhere else or under contract with Verizon means that he will probably be locked.

• Firefox crashes after the Flash videos play with black screen

  Everytime I play a video with Flash, the screen is black, even if the sound is played. Then, Firefox crashes.

  I use the latest Version of Firefox (28.0) on Mac OS 10.9.2 (new Macbook Air) and the latest version of Flash. I tried safe mode and disable my plug-ins to make sure it is Flash.

  I have re-installed Flash and installed, but it did not help.

  My Firefox crash reports say "hang." libsystem_kernel.dylib@0x15a3a ' signature and ' EXC_BREAKPOINT / 0x00000002 "due to the accident."

  Have you tried to disable hardware acceleration in Flash Player?

  • http://helpx.Adobe.com/Flash-Player/KB/video-playback-issues.html

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene