The power to do more?

Similar Questions

• My iPod stop now, it won't turn even after be plugged into the power supply for more than an hour

  IiPod touch than 64 GB itself now cut an hour plug into the current af it starts

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• I can't start with Satellite P10 by pressing the power button more

  I can't start my Satellite P10 by pressing the power button more.
  Sometimes, very rarely its starts when I hold the power button for a while say 10 seconds.

  I tested the power supply and a battery to my friends P10 (of the same type) and both work very well.

  So it must be a problem with the key.
  No idea what to do?

  Thanks for any help

  The best.

  Tobias

  If it s a button or a power supply electronic problem, then you can't do anything.
  In this case assistance by the technicians of laptop would be necessary.

  But the next time that you should try this option if the laptop turns on not;
  Remove the battery and unplug the AC adapter from the laptop for about 30 min.

  After this short period of time to reconnect the two parts and check if the laptop could start.

  Good luck

• I have an idea on the program application Adobe InDesign to increase the power of sale of Adobe InDesign, by adding an additional menu, with an additional menu that I hear more important for the future of printing.  How can I report directly to the

  I have an idea on the program application Adobe InDesign to increase the power of sale of Adobe InDesign, by adding an additional menu, with an additional menu that I hear more important for the future of printing.

  How can I report directly to the developer indesingn adobe...!

  You can create a feature here request:

  Feature requests/bug reports

• recently, I intend to download, but unfortunately this is already more than 5 attempts. Thanks to the slow connection and the power outage, my download has failed to complete. Would it not possible to download the app again? Concerning

  Recently I wanted to download, but unfortunately it's already more

  only 5 attempts. Thanks to the slow connection and the power outage, my

  to complete the failed download.

  Would it not possible to download the app again?

  Concerning

  A trial version is not different from the full version.  Using your serial number to activate a trial version, the access limit is removed.

  If you get access errors thrown at you when you try to use a download link, check that you have enabled cookies and clear your cookie cache.  If he continues to not try to use a different browser.

• My iPad has been verification of operating system update for more than 3 hours.  Not able to do anything. Cannot cancel or turn off the power. Help please.

  MY iPad has been verification of update of the new version of operating system for 3 hours.  Unable on camel back or cut off the power supply.  What should I do? o

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears.

  Then go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete. Then go to settings > general > Software Update and try again.

  If that doesn't work, try updating through iTunes on your computer.

• Lost the power meter of my office - and it is therefore more 'selectable' inside the 'Settings' box of Notifications. Its information line shows currently in gray (unselectable) text instead of the text in black (of your choice).

  I lost the power meter of my office - this little icon that shows when your laptop is plugged in the current House, and where your battery level is when you're not connected to the power of the House

  The problem I found is that it does not appear in mode 'selection' in the 'Settings' box of Notifications.
  Its information line currently shows the text in gray (unselectable) color rather than black (selectable).

  For unknown reasons, the tutorial of vistax64 does not help, so I don't see why not, there is another way...

  Do a system restore. Choose the date where all the icons in the taskbar were present and functional as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• macOS Sierra - press and hold the power button to enter the mode 'sleep'

  I recently updated my MacBook Air (13 inch, early 2015) model of El Capitan macOS Sierra 10.12. Before the update, hold down the power button / stop for 2-3 seconds, put the machine in standby mode. It does not properly after the update. Release the power button to switch to sleep mode works only once after each time you start the machine.

  I know he has an option to set the mode of sleep using Ctrl + button / stop and by selecting one of three options to restart, sleep and Shutdown, but who needs 3 more click click and is not fast. Also, independently of any application that is open, pressing the button walk / stop worked fine before the update, but now I need to be on the desktop even do Ctrl + Power button work.

  All patches available for it? Miss me the old way of put my Mac to sleep I do not remember if I did some tweak in my Mac, or was it a default feature...

  Greetings jainam2209,

  Thank you for using communities of Apple Support. It seems you want to put the Mac to sleep, but it does not always work.
  I would recommend read you these articles, the first article explains the ways that macOS Sierra is supposed to go to sleep.
  The second article can help if the computer won't sleep when you're trying to sleep.
  

  macOS Sierra: put your Mac to sleep

  macOS Sierra: If your Mac won't go or stay asleep

  Take care.

• L50 - A satellite - state of the power supply is lit, but laptop will not start.

  Hello
  A few months ago, I bought a new Toshiba laptop L50 - A Satellite. He worked incredibly in all directions until about a week ago when it lights. He has been connected to the charger with the charging light but does not illuminate. When I press the power button, the small ring of orange around the button light turns on and will be so all the LED lights on the front of the laptop, as well as I can hear the fan and other work items, but the screen remains black. This has been the case for a little over a week now and at random, two of the times I tried to power on my laptop, he turned on and working but then after that be cut, it wouldn't work again. He has not worked since 5 days and since then I tried to turn it on.

  One of my friends who knows a thing or two suggested perhaps it was the display that was defective and should I try to connect it to my TV via a HDMI cable. This seemed logical, so I gave him a test in the hope that he'd at least let me know what was the problem, but no fixed image displayed anywhere.

  My laptop is almost always connected to the charger and an expensive cooling fan, so I guess that battery and components must still work most of the time, and I've read that this laptop is designed so that you cannot remove the battery, but I do not know how to in any case.

  I tried a few different methods to try to start it as now the Start button / stop and the ESC key for 10 seconds, now back while pressing the power button and pressing the power button while pressing F8 repeatedly. But none of them worked so far.

  If anyone has any ideas or a way to help, that would be greatly appreciated.

  Thank you, Julian.

  Hello

  The L50 - A Satellite supports a stop (hole) switch located at the bottom of the unit.

  Cell phone is freezing, do not start or has a power failure, which cannot be resolved by pressing the button for 10 seconds (force shutdown), please use stop force switch instead of the main battery.

  During a stop by pressing this button force, the behavior of the system is identical to unplug the AC adapter and remove the main battery.

  More details here:
  Stop power switch (hole) for models with one main battery sets
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  Hope this helps

• iMac 2010 freezes, restart by only the power button

  My iMac 21 "early 2010 has been a faithful workaholic but has seen better days of course. The last six months, it was completely freeze but with the ability to move the mouse - seems to be getting more frequent. It must be restarted by pressing the power button. Usually, it's when Safari is open and above (in the current window usage), but not always. My Console is reading the following:

  Diagnostic reports to the user (at the time of the freeze)

  21/03/16 1:29:59.772 Safari [330] PM: KeychainGetICDPStatus: key :-25300

  21/03/16 1:29:59.772 Safari [330] PM: KeychainGetICDPStatus: status: power off

  21/03/16 1:30:00.583 PM WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x14a window is not attached to the window 0x14c

  21/03/16 1:30:06.301 PM Safari [330]: making closing tcp_connection_destination_handle_tls_close_notify 602 due to the TLS CLOSE_NOTIFY alert

  21/03/16 1:30:10.696 PM WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x14a window is not attached to the window 0x14c

  21/03/16 com.apple.WebKit.WebContent [365 1:30:13.570 PM]: CoreAnimation: rendering Error 502

  21/03/16 1:30:16.561 PM sandboxd [146]: com.apple.WebKit (365) ([365]) deny mach-search ATS Query Port 477 (by-pid)

  21/03/16 1:30:16.577 PM sandboxd [146]: com.apple.WebKit (365) ([365]) deny mach-search ATS Query Port 477 (by-pid)

  21/03/16 1:30:17.483 Safari [330] PM: KeychainGetICDPStatus: key :-25300

  21/03/16 1:30:17.483 Safari [330] PM: KeychainGetICDPStatus: status: power off

  Diagnostic System (at the time of the freeze) reports

  WindowServer_2016-03-21-133137_Gazzerks - iMac.userspace_watchdog_timeout.spin

  WindowServer_2016-03-21-133145_Gazzerks - iMac.userspace_watchdog_timeout.spin

  WindowServer_2016-03-21-134800_Gazzerks - iMac.wakeups_resource.diag

  The above system diagnostics are always consistent with the gel, with the exception of the following line which appears sometimes (on a former gel):

  VTEncoderXPCService_2016-03-10-075028_Gazzerks - iMac.cpu_resource.diag

  Any help in locating the problem would be greatly appreciated.

  Thank you

  Gazzerk

  If you can post a report EtreCheckon your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Toshiba NB550-111 - no connection if the LAN cable is more than 2 metres

  Hello

  My newly purchased Toshiba NB550-111(Windows 7 Starter Service Pack 1) has problems with the LAN card.
  If the LAN cable is more than 2 meters, no relation to Allied Telesyn switch (no indicator led on the switch, 2 other desktop computers already connected). I tried not to connect in a different port (one used previously by one of desktop computers), no connection. I tried with 3 cables, still no results.

  Cables (cat5E, so important) have been tested OK before with a cable Tester, and I use both of them without any problem with another 2 desktop computers at home. I set another cable (5 m long, newly purchased) and tested for connectivity. It works very well with the other two offices, no results with the netbook. I tried with adapter it works, I disabled ' energy efficient ethernet "NIC, still no connection properties page. It only connects if the cable is less than 2 meters. I tried to connect the netbook directly to the DSL router, still no connection with a longer cable.

  The device is reported by windows as work very well, and the test Toshiba utility ends there is no problem. Windows I configured in the Control Panel, the Plan balanced for maximum performance in the power options, still no results.
  Any ideas, please?

  Now maybe stupid question but what is with WLAN? You don t want to use WLAN?

• Cinema poster 30 '' Dead - could this be the power adapter?

  Monitor: Cinema Display 30 ''

  Computer: Connected to a MacBook Pro mid 2012 of the retina with a 2.6 GHz Intel Core i7, 16 GB of RAM.

  Graphics card: NVIDIA GeForce GT 650 M 1024Mo

  I got the screen of cinema since 2007. Used with a tower for the first five years, replaced the tower with a MacBook Pro in 2012. The CD went with the laptop using a bolt of lightning > DVI adapter for about 3.5 years, worked ok. Finally, the Cinema Display monitor everything went black. The LED in the corner is always on when powered. I can still use the power on the CD button to turn the monitor on/off, standby system etc. the MBP still sees the CD in monitors when the adapter is plugged. The CD can still push USB devices. But there is no picture, no matter what I do.

  Finally carried the old tower outside and connected to it, just to see if it was something with the MBP the CD. Same results, no image.

  I noticed that the power adapter brick remains cold. If it's just that bad, and I could replace it for a relatively low cost? I see the price of $150/200 on Amazon. Don't want to waste his time with that much more, it's a 9 year old monitor. But I really loved and I want to see if I can get pulled upward again.

  Thank you.

  Looks like either the back lit display is on the way out (you can tell if the monitor is nothing display by shine a very bright light until the front screen and see if you notice any displayed video), or the display is not simply detect the output signal of your GeForce card. I have a NVidia GTX 770 and one of my 3 cinema Display is sometimes the same thing. I end up having to unplug the screen for a few seconds, use WIndows to detect the display, plug the monitor back in and detect the display again to get any video to show on screen. It is intermittent but sometimes quite stubborn. Good luck! If you have two monitors, you can use work to see whether or not your cinema is even detected. If it is, but the screen is always black, it is likely, that you will need the spare parts for backlight.

• Pavilion m6 - stop suddenly and mystery of the power cord

  Hi people,

  I got a very strange problem with my laptop from m6-1035dx Pavilion the past two days. This is a reconditioned unit and have had some problems with it in the past (both hardware and software-related) that I managed to fix me, but this one left me speechless.

  It started yesterday when the computer was placed on a bed (with a CoolerMaster pad below, which I almost never separate the portable device) and immediately turn off the power. In the past, I had problems with heat stops, that I solved with a bit of air in canned and CoolerMaster pad said, so I don't think much. But the same thing happened today, and I noticed that when it has restarted, it does not recognize the fact that the computer is plugged in. Unplugged the cord/AC converter to three points (computer, converter, wall) and tried again, still nothing. Tried another outlet, blew the vents, power off and removed/re-inserted battery, still no recognition of the power. I reinstalled HP CoolSense (which I had removed several months before) and hope that would take care of things. Meanwhile, I shut the computer off again, and the LED power indicator lit on its own.

  Several hours later, the computer was reactivated and placed on a flat surface. Someone tripping over the cord, and the computer turns off again. The LED power indicator is out once more, so I unplugged the power cord and left for a few minutes. Blocked again, and the power was back.

  I am reasonably confident that I should replace the power cord at this point, but I want expert advice before I commit the money that him. It may also be interesting to note that while the power cord did not work, the battery (92%) had about two hours and six minutes of use remaining, which is well below the advertised battery capacity (to be noted that only Chrome was running at the time) and what I saw of the battery in the past. I think that the cable or converter can be shorted, then is it safe to use the computer at all? Wouldn't be a good idea to replace the battery as well? I will provide any other details if necessary and thank you in advance for any help or advice.

  Hi maestro35,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having feeding problems with your Pavilion m6. I'll be happy to help you with this. If it is running with the battery, I wouldn't worry about the replacement of the battery quite yet. As for the fact that it gives you less time announced that it could be the mere fact that the battery life decreases over time. You don't mention your operating system, this is why I have included two links below which will allow you to test and calibrate the battery. This will confirm that the battery is working properly.

  Test and calibrate the battery (Windows 7)

  Test and calibrate the battery (Windows 8)

  I agree that it appears as if the power cord is the question. If you have a similar cord, you might give it a try to see, but there's a chance it might be the prospects of power supply for laptop. If something is shorted, then you shouldn't really use the laptop but without testing actually physically we will not be able to determine if something is put in short circuit.

  Thank you

• Satellite C50D - B - 120 NOT turn on or turn on the power.

  Press the power button and the led becomes just white upward around the power button.

  But he didn't put there nothing else running. No display, no noise internal, nothing.

  Just bought this 5 months or more and done wet a bit more about it.

  Tried to remove the battery by pressing on and now the power button for 30 seconds, then put the battery in the back, but nothing, nothing helped.

  Any help would be much appreciated

  Hello

  Try to remove the external power supply and battery (2 screws) and wait 20-30 minutes.
  The relocation of the pack and try again.

  Good luck
  Tom BR

• MacBook pro 2014 randomly turns off, do not dΘmarre, unless the power button is held down.

  Seems to happen whenever itunes is running.  No warning whatsover, the screen goes black and the music stops.  The macbook turn then back unless the power button is held down for more than 10 seconds.
  ITunes only worked, it wasn't overheating or anything.

  Any ideas?

  Try SMC and NVRAM resets:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  If no success, make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.