flashVars Boolean

Hello

Work on a site that uses the flashVars. I could not work with variables numbers no problem, but I have a Boolean value which is proving more difficult than I expected. Any help would be appreciated!

the HTML parameter is "isMetal".

I've tried a few things and that's what I have now...

var isMetal:Boolean;

function init (): void

{

true if 'isMetal' is set to '1'; false otherwise

isMetal = loaderInfo.parameters.isMetal! = « 0 » ;

}

Then I try to use the Boolean value to choose between the layer blend modes and filter settings... Unfortunately, it always uses what happens after 'else '.

If (isMetal! = 0)

{

color = new AdjustColor();

Color.Brightness = 100;

Color.Contrast = 10;

Color.Hue = 0;

Color.saturation = - 100;

loadLogo.blendMode = BlendMode.SCREEN;

}

on the other

{

color = new AdjustColor();

Color.Brightness = 0;

Color.Contrast = 10;

Color.Hue = 0;

Color.saturation = - 100;

loadLogo.blendMode = BlendMode.MULTIPLY;

}

all flashVars are strings.  Use it as a string:

if(isMetal!="0")

{

etc.

Tags: Adobe Animate

Similar Questions

  • Undefined FlashVars

    I just upgraded (finally) to Flash professional 8 version and I can not get any FlashVars to load by using the following syntax:

    < param name = "FlashVars" value = "thumbheight = 100" / > "
    < embed src = "slideshow.swf' FlashVars =" thumbheight = 100 "

    They have just not defined. I tried the _level0. and _root. scopes and they are not defined in these areas either.

    I tried to publish for Flash player version 7 and 8 and no luck with either.

    Anyone got clues or similar problems?

    OK solved now - all FlashVars appear to be strings and that was causing problems.

    Numbers must be cast with Number() and since version 7 of the Flash player than Boolean() don't convert in number everything first before of evaulating a string where 0 will evaluate true - and will be 'false' and will be 'no '.

    To cast to a Boolean value 0 use Boolean (Number (showCaptionHeader));

  • operator Boolean browser.tabs.onTop missing some about: config in firefox 31.

    I have three computers running firefox 31. I have just installed it on a pc running windows xp, but cannot know the Boolean operator 'browser.tabs.onTop' in: config. I tried to make a new Boolean operator by right click and choose new/Boolean, but it has only created a channel operator.

    In fact, you have already installed Ctr. In the Options dialog box, there is a control to move the tab bar. You can get the options on the page modules. Either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons

    In the left column, click Extensions. Then on the side right, you will find classic theme restaurateur and his Options button.

  • Caveat "the formula uses a Boolean value instead of a number" would dismiss

    Hello!

    I do a "Calculator" to get estimates of price for the projects, according to which processes the customer wants.

    Rates for each process are added in another table, and I use the list of control buttons to enable or disable the various processes.

    Here is an example of a formula:

    D3 determines if the part of the project modeling is performed, so the price will be or will not be calculated.

    If D3 is true, the result is multiplied by 1, give me a positive amount. If false, the result will be multiplied by 0, 0, so nothing to add to the final cost he send me some.

    Same for B4 in the same formula.

    This formula is repeated all over the chart, with minor changes to add more complex options, but it's all the same.

    Everything works fine, but I got those blue triangles warning me of "the formula uses a Boolean value instead of the number". That's fine with me, I like the use of the Boolean types, and they make my formulas work well in my calculator. How can I reject the blue triangles?

    They are a little annoying. And they do not really correspond with the general style of my calculator.

    I saw someone talking other types of formulas, with SEARCH and yews, but who is really complicated and I don't know how to do... Especially for a simple calculator

    Is there a way to simply do not display warnings?

    Using the version 3.6.2 on a MacBook Pro, OSX El Capitan 10.11.5

    Thank you!

    Hi Sinshassan,

    I don't know a way to escape your blue flags except to make a formula which is consistent with the expected numbers. It is not difficult.

    My formula D2 = yew (AND(D1,B2), C2, 0)

    The IF statement tests the two D1 AND B2. If they are true, then it indicates the value of C2 your carbon Modeling::High Poly #1, if one or both are false (unchecked) then 0 is displayed.

    Give it a try.

    Quinn

  • Network.protocol - handler.external.magnet type = boolean value = true

    Associate files of the magnet with firefox and qbittorrent

    With firefox 3.x the following entries about: config works great.
    Network.protocol - handler.app.magnet type is string value is/usr/bin/qbittorrent
    Network.protocol - handler.external.magnet type = boolean value = true
    Network.protocol - handler.warn - external .magnet type = value boolean = false

    With 4.0 they do not, and I see the problem is that 4.0 won't accept "Network.protocol - handler.external.magnet type = boolean", because it constantly changes its type to string.

    So, how do links magnet, transferred to qbittorrent via firefox 4.0?

    I found the solution. Previously, when I right click the topic: config page and select New to create the entry of Network.protocol - handler.app.magnet , firefox would immediately follow with a second window asking the access path to the torrent app and qbittorrent/usr/bin/qbittorrent already entered for me (who tells me that firefox has already known qbittorrent is the application to use). I click on OK, and firefox would be error when I clicked on a link magnet.

    This time, I deleted the default/usr/bin/qbittorrent, then pasted the same exact value into the box and click OK. And now it works. The only difference between the two methods; in the method that fails, the path/usr/bin/qbittorrent is highlighted when I click OK, in the method that works, the path is not highlighted.

  • First HP axis line bug in Boolean expressions (Adv. Graphing App)

    When the graphic representation of an inequality and excluding a part of it using Boolean expressions, there is a bug where the first will be graphic axis lines are part of the solution by using 'AND NOT '.

    An example of this is that if you were to graph a circle of RADIUS < = 5 and remove a circle of RADIUS < = 4.

    Example:

    V1:=(X^2+Y^2<=5^2) AND NOT (X ^ 2 + Y ^ 2 < = 4 ^ 2)

    Axis lines X - there exist in the excluded (X ^ 2 + Y ^ 2 < = 4 ^ 2) and can be traced back as if it were part of the solution of V1.

    Interestingly, if V2 is set to be equal to V1 (X - 0.5, Y - 0.5), axis lines are no longer aligned with the axis of the grid, but are rather shifted-0.5 on the X and Y as well as the rest of the V2.

    In this case, the equation can be modified to work around the bug by removing the NOT and change the sign of the circle radius 4-more of:

    V1:=(X^2+Y^2<=5^2) AND (X ^ 2 + Y ^ 2 > 4 ^ 2)

    Does anyone know if there is a reported bug?  Where I might be able to look to see a list of known issues?

    Thanks for the detailed examples. It took me a while to see what you were talking about, but once I did I had the info the graphic calculator expert.

  • unique table boolean Boolean

    Hello world
    I'm working on a project concerning the Modbus using the "Modbus on desktop.vi. In Vi, the "values of coil to write" type is an array of Boolean. I want to change it to a single Boolean value. is this possible? I get a screenshot of the Panel front and block diagram.

    Thank you.

    You can simply use the array to build with a "single Boolean value.

    This will give you an array containing a single element.

    Steve

  • Boolean index in the array

    In Matlab, often use a Boolean array to access the specific values in a table.

    It is a good way to reduce the itterative loops and improve the speed of the code.

    I'm trying to find a way to do this in a Mathscript node, otherwise the code takes forever to run.

    Common code in Matlab and Mathscript:

    a = [1,2,3,4,5]; % This is normally a much larger range

    b = [1,0,1,0,1]; %I whether Boolean, but by default it's double

    c = b > 0;  b change % to boolean

    d = [9,9,9,9,9];

    The Matlab code is:

    d (c) = a (c);

    d

    > d = [1 9 3 9 5]

    If I run the above in Mathscript, I get the following error:

    In Mathscript, to achieve the same result "d" I currently have this:

    for i = 1:length (d)

    If c (i) == 1

    d (i) = a (i);

    end

    end

    d

    > d = [1 9 3 9 5]

    A slightly faster version is:

    for i = 1:length (d)

    j = 1;

    If c (i) == 1

    e (j) = c (i);

    j = j + 1;

    end

    end

    d (e) = (e);

    d

    > d = [1 9 3 9 5]

    Any ideas?

    Thank you

    Hello

    The code you have posted works fine in the MathScript in LabVIEW 2009 node as well as in the MathScript window and the MathScript node in LabVIEW 8.6.  As such, I'll assume that you have found an error in the window of MathScript in LabVIEW 2009.  We have already identified this problem and currently filed the bug report 151999 for her.  You see error message did not come through in your post, so I guess it is-90026: ' indexes for an indexing operation matrix must be real and positive integers. "  The problem is that we do not treat the indexing variable 'c' as a boolean type.  As a result, it reports an error when it tries to use the index 0 instead of a fake.  We are working on a fix for a future version.

    To work around the problem in the MathScript window, you can use find instead of any Boolean indexing command.  It should integrate more quickly than the implementation of loop that reference you.  Instead of
    d (c) = AC;
    use
    d (Find (c)) = a (find (c));

    Grant M.
    Staff software engineer | LabVIEW MathScript | National Instruments

  • Control relay with Boolean switch using DAQ assistant 9481 - problems

    Sorry for what may be a stupid question but I'm stuck in quicksand.

    I use a relay module 9481 and have two external relays connected lines 0 and 1.

    When I create a digital output 0 line by line, I can run the test inside the express and activate the relay and turn off without problem.

    The generated block DAQ expressed expects a Boolean input of 1 d. (See attached photo).

    I want to connect a Boolean switch relay line disk 0. You can connect live not because the switch is Boolean and the input is Boolean 1 d - I'm a conversation in the pict.

    All plumbing lines display results, the relay never active.

    Any bunch would be greatly appreciated! Thank you

    Mr._Mechanical,

    Welcome to the Forums of switch OR this forum is generally intended for products OR-SWITCH [such as the NI PXI-25xx & NI SCXI-11xx], I think I know the answer to your question.

    I think the reason why it's a failure is the conversion you make generates a table of 16 Boolean [as the 'boolean to (0,1)' function creates a data I16 type] with your data more false data points 15.

    When you try to control the relay, he sees 16 datapoints are you Commander to a single port [channel] and so error out.

    My suggestion would be to use normal DAQmx digital output screw [with, he set up as ' Digital > single channel > single sample > Boolean (1 line) "] rather than the DAQ assistant.

    If you use the daq assistant, simply by using the function 'Building the table' will transform your simple Boolean data point in a Boolean array containing a single element.

    While the DAQ assistant is very easy to use, I recommend that you use the DAQ assistant, because this reduces the features and increases the execution time.

  • Apply the custom scale and add Boolean if I can connect on demand

    Hello

    I have a problem adding my custom code scale. I have a pressure sensor that works in the range of 4-20mA. So, I made a custom scale as you can see in the code and tried to connect the name of custom on the DAQ.mx scale. Which doesn't seem to work any suggestions?

    Another problem I have is I want to be able to log on to the application with a Boolean button. How to do that if I want to keep the ability to write data only to a determined time interval?

    Greetings

    DP


  • How can I trigger a Boolean control from a Boolean indicator?

    Hello

    I want to trigger a Boolean control (like a button) to a true value as soon as my indicator (LED) Boolean Gets a value of true.

    Can someone tell me how to do this?

    You can use either a local variable or a value of property node to define a control value.

    Right-click on the control and create/Local Variable or Create/property/value of the node. Change the property node or a variable to write mode by right clicking on it and selecting "modify to write." Local variables can default to write (do not remember) but I know that failure of nodes of property for the playback mode.

    I prefer the nodes property simply because they have a mistake in and out, so I can control the flow.

    [Edit:] Remember that you must pass instead of locking for the mechanical action. If you need a locking Boolean control and need programmatically set its value, then you need to reset the State after reading using either a local node or property.

  • Boolean reference table

    How do I create an array of Boolean reference?

    Steve

    Hi 4BoysDad,

    You are eager to create an array of Booleans in LabVIEW?

    If so, you can place a constant matrix down, then place a Boolean constant inside the empty array. This will turn it into an array of data type Boolean. Then you can stretch the table to add/remove the number of items in the table (or use the up/down arrows index).

    If you try to do that in something else than LabVIEW, let me know.

    Also, for any future reference your post will get more action if you post them in the appropriate sub-forum. This forum is for our DSA material, post it in the forum LabVIEW will result in faster responses.

  • Boolean ignored in a journal file vi

    Hi guys,.

    I'm trying to write a VI that generates a file delimetated tab, add text to it for the titles of colum and then log data digital pannel before him once per second. I got it to work but am having a few problems with the structure.

    in the current provision of the VI ignores the "log data" button, if you set before you run the vi that it works, but if you set during the vi execution he sees as false. But I tried to put the button more in the loop and then it works, but the stop function stops working.

    I have attached a picture of the program. Thank you Zac

    You still have serious data flow problems.

    1. broadcast as false.  The value is not really false.  False is the default for a Boolean data type.  You will notice that the probe is grayed out.  This means that he has not been read yet, given that the probe has been placed.  This is because the program has probably already entered your home while loop at the time wherever you placed the probe.  You have really no way to stop this inner while loop.  The condition for the Terminal stop comes from outside of the loop.  So it will be run once, if this value is True, or forever if this value is false.  This is because the structure of the event will run only once before from the inside, while the loop is entered.

    2. to a boolean in a loop, you have a cut wire.  It's because you try to force the data flow to the rear.  The second fram of the structure of sequence can run until the end of the first image.  However with your son, your demanding that data of the Boolean control as part of the 2nd before executing the code in the first frame.  A logical impossibility.

    Get rid of internally while loop in the 2nd frame.  Move the turn record out outside while loop.  Change the data type on your initialization of registry of shift of the entire blue wire to the Double orange wire.

    What you do, you should watch a state machine architecture.  Search the forums for examples.

    Also, I recommend watching the LabVIEW tutorials online
    LabVIEW Introduction course - 3 hours
    LabVIEW Introduction course - 6 hours

  • generate the subset of the decimal table to an array of Boolean

    I have a decimal table 1 2 3 4 5 6, and I have a boolean with the same table size 0 1 0 1 1 0.

    How can I retrieve the subset of the decimal table of the corresponding "1" position of the table of Boolean (in this case 5 4 2)?

    The value of the Boolean table are editable (casting either 1 00100), so the size of the array decimal subset is not fixed (1, 4).

    (I assume you mean digital Board. "Décimal" is just a specification of formatting and irrelevant for this)

    Try something like the following (the FALSE case has just wired table in the whole unchanged):

    (In case you're dealing with huge paintings, a few performance modifications should be made so that everything goes more in place.)

    (Sorry for the spelling errors, ignore them )

  • Cluster of Boolean controls does not expect update

    Hello

    I'm confused about the following question: in the joint Test Cluster of Boolean controls Functionality.vi, I have a Boolean controls group, some disabled and grayed out, other permits. If I click on one of two Boolean controls permits, and then on the other hand, I want the Boolean selected first control to False. Update Cluster indicator shows the desired behavior. What confuses me, is that the new value does not update accordingly. When I clicked at least once on two Boolean values, the new value remains [TRUE, TRUE] at all times, and the structure of the event runs.

    I have a work around, as shown in the Test Cluster of Boolean controls feature Workaround.vi, but it looks like 'Nice' no, because it's more complicated than necessary. Anyone know why the new value refreshes as expected? Please notify. Thank you.

    Best regards

    Peter

    Here is a simple solution.

    Of course, you can use a container of radiobutton instead of a cluster for simpler code. Try it!

Maybe you are looking for