Network.protocol - handler.external.magnet type = boolean value = true

Similar Questions

• Why Firefox fixed Network.protocol - handler.expose. (Protocol) to 'true' at each startup?

  I want to make FF open "file://"-links with Windows Explorer.
  It works if I put "Network.protocol - handler.expose.file" false
  and "Network.protocol - handler.external.file", true.
  But "Network.protocol - handler.expose.file" is missing in the topic: config after a reboot. So I put in my user.js. Now I can see the variable, but its still set to true no matter what happens in my user.js. Why the FF is leading my config?

  Try locking Preferences .

  Thank you

• Does not save the Config parameter: Network.protocol - handler.expose.file

  In "subject: config" I put
  Network.protocol - handler.expose.file = false
  in order to open the files and folders in external applications, and not in FF.
  But when Firefox closes it removes this setting of prefs.js
  When Firefox starts and it is WRONG in prefs.js then it sets it to true.
  How can I curcumvent that?
  I want to keep it FALSE.
  Thank you.

  27 FF and don't offer me to Australis.

  I found the solution: the value "noscript.fixURI" = false (in "subject: config" or in prefs.js).
  Problem was caused by too defensive noscript.

• By default not listed as alternative external protocol handler

  In Windows, I recorded my own Manager for an external Protocol in the registry. When I click on the link in Firefox or Thunderbird, I show the dialog box "launch the Application' in which I should choose an application for the management of the Protocol, but the program that I saved as default handler is not listed as an alternative, that is the only entry in the list is"choose Application ".

  Comments:

  • I'm never shown a message indicating that the Protocol is unknown, that is, the registry entry is
  • The links work as expected in Internet Explorer.
  • If I sign up to the application to another of my programs I get an entry in the dialog for some programs, but not for others. I found no difference in programs that would make them appear or not. The icons are never displayed in the dialog box, although defined in the protocols registry settings.
  • If I put an illegal program path in the registry, I get an entry in the dialog box.
  • The same problem occurs regardless of the protocol identifier that I choose
  • The behavior is the same no matter if the Protocol is registered under HKEY_CLASSES_ROOT or HKEY_CURRENT_USER\Software\Classes
  • If I change "Network.protocol - handler.warn - external-default" in subject: config false my program is successfully launched when you click on the link
  • Running on Windows 7 Starter Edition, but the same thing happens on other versions of Windows 7 and Windows Vista 64-bit

  I found the cause of the problem. It was caused by the applications version information in my case. My applications are created with Delphi 2010.

  If I create a small test project and do not check the project "Information to include in the draft version" option, the application will appear in the dialog box (in fact the arguments and the path of the applications appear as defined in the registry).

  If I check the project "Information to include in the draft version" option the application appears only in the drop-down list if I put the text in the FileDescription field.

  I think Firefox should always show the application regardless of version information. If missing the FileDescription Firefox should failover using the software "productName" or the path of the applications.

• The default value for a property with data of type boolean

  Hi all

  Is it a system preference setting, where the default value for a property with data of type boolean can be a Virgin? I want to keep the value by default in a vacuum, but every time I save the property even after empty selection, the default value changes to FALSE.

  

  In this case Boolean doesn't help you, you mayneed to create a chain of ownership and have true/false / "" as your list of values

• Caveat "the formula uses a Boolean value instead of a number" would dismiss

  Hello!

  I do a "Calculator" to get estimates of price for the projects, according to which processes the customer wants.

  Rates for each process are added in another table, and I use the list of control buttons to enable or disable the various processes.

  Here is an example of a formula:

  

  D3 determines if the part of the project modeling is performed, so the price will be or will not be calculated.

  If D3 is true, the result is multiplied by 1, give me a positive amount. If false, the result will be multiplied by 0, 0, so nothing to add to the final cost he send me some.

  Same for B4 in the same formula.

  This formula is repeated all over the chart, with minor changes to add more complex options, but it's all the same.

  Everything works fine, but I got those blue triangles warning me of "the formula uses a Boolean value instead of the number". That's fine with me, I like the use of the Boolean types, and they make my formulas work well in my calculator. How can I reject the blue triangles?

  

  They are a little annoying. And they do not really correspond with the general style of my calculator.

  I saw someone talking other types of formulas, with SEARCH and yews, but who is really complicated and I don't know how to do... Especially for a simple calculator

  Is there a way to simply do not display warnings?

  Using the version 3.6.2 on a MacBook Pro, OSX El Capitan 10.11.5

  Thank you!

  Hi Sinshassan,

  I don't know a way to escape your blue flags except to make a formula which is consistent with the expected numbers. It is not difficult.

  

  My formula D2 = yew (AND(D1,B2), C2, 0)

  The IF statement tests the two D1 AND B2. If they are true, then it indicates the value of C2 your carbon Modeling::High Poly #1, if one or both are false (unchecked) then 0 is displayed.

  Give it a try.

  Quinn

• HP Envy 700-414: lack of network protocol

  Problem of local network access.
  Hello
  I have a problem to an ASUS 10 Windows computer on a local network with Windows Explorer. I get the error
  "One or more network protocols are missing on this computer."
  This computer means one which makes access to or that I'm trying to access?
  I have no problem accessing a Vista laptop or drive MY Book external drive on the same network.
  I also noticed a mistake in the Broadcom 802.11 network adapter even if it says it's working properly.
  The Broadcom driver is 7.35.336.0
  Computer HP Envy 10 700 - 414 - Windows

  Any suggestions will be appreciated.

  Frank C

  

  Yes, I think it might have something to do with Windows 10 that many have network problems.  Since WiFi as a single screen shows that it is not connected, I would start with that.

• Sharing of Boolean values across while loops

  I'm new to Labview and I try to use an angular encoder as a type of switch.

  I want to take measures continuously from the angle of the encoder and turn on an analog output signal, each time comes in a certain angle. When the encoder drops from this angle, I need the signal to turn off.

  To do this, I try to run two parallel while loops. We measure the angle of the encoder, while the latter creates the output signal. What I want to do is to put a logical statement in the measurement loop that will record 'true' if the maximum angle is reached. I try to get that 'real' statement in the loop of generation of signals as a trigger to turn on (using a case structure and the "DAQmx Start Task.vi") output. The question I have, is that the 'real' statement cannot exit the loop to measure up to the end of the loop. But since I'm running it continuously, the loop ends. Thank you.

  Create a local variable of the Boolean in anxiety.  Right-click on the local area and select change reading.  Put this inside the loop else local.  If you have a loop that writes to the Boolean value and a loop that reads from the local.  Now you can remove the wire that comes from a single loop and feeds on the other.  Then your curls will work in parallel (if there is no other dependencies of data between the two loops).

  As an alternative to local variables, you can use a queue to transfer data from one loop to the other.  A loop (the producer) will write to the queue.  The other loop (consumer) reads from the queue.  See the examples on the architecture of producer-consumer for more information.

• Install network protocol: Windows TCP/IP

  I tried to intall a professional printer to my PC and I get the following message.

  Install the following network protocols:

  Windows TCP/IP

  I found the location on the network Conections where I supposed to insert a number, but what number shoud I type in?

  Make sure that your computer is connected to a network. You install a network printer. If you are not connected to a network, use the option "add a local printer.

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  -If the printer has a display area, you might be able to access a menu option to view or print the printer, including the TCP/IP address configuration information. Other printers may allow you press a specific button, or other mechanism to print configuration information. Check the documentation that came with the printer to see what options are available to you.

  I hope I could help

• Guests of type Boolean in BI answers

  Hi all

  I have a question about the guests of type boolean of creation in BI answers.

  I want to do the "Allow corrections" variable prompt @{CorrDecl} with selection buttons 'Yes' / 'No' in the suite, use the value selected in the formulas in my analysis.

  I tried to make it with CASE-construction:

  CASE @{CorrDecl} WHEN "Yes".

  THEN Formula1

  Of ANOTHER Formula2

  END

  but I got an error-State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27004] Unresolved column: "Yes" (HY000)

  Could you give me an advice, how can I make my work quickly?

  BTW, the error in your formula is, probably, because you are missing single quotes in your presentation variable

  CASE @{CorrDecl} WHEN 'yes '.

  THEN Formula1

  Of ANOTHER Formula2

  END

  It should be "@{CorrDecl}"

• Getting the value of a Boolean value defined in the pageFlowScope...

  I have a link on one of my feeds defined task as a java.lang.Boolean with a value type of #{pageFlowScope.isAdmin}.  For the test, in my PageDefFile, I have the parameter defined as: < parameter id = "isAdmin" value = "false" / >

  In my managed bean, I'm trying to access the value of the "isAdmin" binding as follows:

  Boolean isAdmin = (Boolean) flowScope.get ("isAdmin");

  
  

  This gives me a caused by: java.lang.ClassCastException: java.lang.String cannot be cast java.lang.Boolean when I try to run the action.

  What I'm doing wrong here?  I know it's something stupid, but it's just one of those days... Thank you!

  write as

  to get the value in use of pageflowscope below

  ADFContext adfCtx = ADFContext.getCurrent();

      Map pageScope = adfCtx.getPageFlowScope();

   String appScopeValue=  (String)pageScope.get("vinay");

  Read more: http://www.techartifact.com/blogs/2012/10/setting-the-value-in-different-scope-in-adf-in-programmatic-way.html#ixzz30ISmbA9S

  to try to channel Boolean value as

  Boolean value = Boolean.parseBoolean (strBoolean);

• can I store the output of boolean values in a table?

  the codification output here is '1' and '0'...
  I want to store only '1' and '0' in a table...
  
  but I can't do it please help me...
  
  How to store?...
  
  DECLARE
  EID VARCHAR2 (20);
  BOOLEAN BL: = TRUE;
  BEGIN
  SELECT EMP_NO
  IN EID
  OF LEAVE_FORM
  WHERE EMP_NO = 1;
  BL: = TRUE;
  DBMS_OUTPUT. Put_line (sys. DIUTIL.bool_to_int (BL));
  insert into t1 (BL) values; - error
  EXCEPTION
  When no_data_found then
  BL: = FALSE;
  DBMS_OUTPUT. Put_line (sys. DIUTIL.bool_to_int (BL));
  END;
  
  Published by: 794244 on February 9, 2011 03:11

  No, you can't. BOOLEAN is no SQL, PL/SQL data type. You did not post structure of table t1. Assumimg t1 column has the number value, use:

  DECLARE
      BL BOOLEAN := TRUE;
      N  NUMBER;
  BEGIN
      N:= sys.DIUTIL.bool_to_int(BL);
      DBMS_OUTPUT.PUT_LINE(N);
      insert into t1 values(N);
      BL := FALSE;
      N:= sys.DIUTIL.bool_to_int(BL);
      DBMS_OUTPUT.PUT_LINE(N);
      insert into t1 values(N);
  END;
  /
  select * from t1
  /
  
          BL
  ----------
           1
           0
  
  SQL>  
  

  SY.

• A Boolean value of switching

  Cave of the var: Boolean;

  Cellar = true;

  If (cellar == true) {trace ("true") ;}

  If (cellar == false) {trace ("false") ;}

  cave_hit_area.onRelease = function () {}

  cellar = false;

  }

  Hi, I have trouble getting this work.

  All I have to do is flash to realize that the Boolean value is passed from true to false so that I can make another magic happens.

  I was hoping that changing just he would work... but now I think I'm probably missing something, or I'm going the wrong way on it... but I do not know... Hense why I need help on this one

  Any help on that would be great.

  See you soon

  If it is the way that you do makes sense to you or not, that does not work elsewhere. If you need to change your way of thinking a little bit. Your code becomes more complex (not in a good way) and becomes harder and harder to decipher and remember what it means and what is the case. And using things like _root make you so that it will be much more difficult to make changes in the future.

  So forget what I said earlier about how to manage a bunch of them, but if you have not a lot of them come back later. You'll be much happier.

  The part that I spoke only have an event handler is what is important. Do not try and assign two event handlers. Just assign one that handles both cases. So let's just do this as simple as possible. Forget all the other things you might want to do. Let's just do the star show and hide when you click cave_mc.

  First if your cellar or cave.value (not sure since you seem to continue to add properties) is just to keep track of know if the stars visible or not, why do you need that? You can just ask:

  trace (cave_star_mc._visible);

  Who will trace the value true if the star is visible, and false if it isn't. Do not try and follow something with another variable if you do not need to do. So we won't make any property of cellar.

  If the simpler version of the code would probably be:

  {cave_mc.onRelease = Function ()}

  cave_star_mc._visible =! cave_star_mc._visible;

  }

  The! means taking the opposite of what is the current value. So, if the star is visible now, it will be invisible and if it is invisible, it will be visible.

  If you have the variable for something else, and it might have a different value of the visibility of the star, then by all means make a new varaible. But give it a better name.

  Cellar and cave.value really are not very descriptive. And the code that you are showing seems to mix them. Or maybe that's not?

  If I ask someone "Cellar?" and they answer 'True '. That makes no sense. But if I like someone "isVisited?" or "isActive?" and they answer 'True '. It makes more sense.

• Cannot convert the value &amp; quot; down &amp; quot; a Boolean value

  I am trying to establish why this example gives me an error, it is intended to demonstrate the ability to return one data type other than a Boolean value to a UDF but doesn´t seems to work. Why is this? I'm using cfmx7 who shouldn´t of importance that the UDF are cf5 + thank you for any response
  

  Hydrowizard wrote:
  > Thanks for the reply Phil, sorry I forgot to put the error message is
  > "unable to convert the"inferior"to a Boolean value. The return is partly false in
  > the code I got rid of him now, I thought that it was always
  > Thank you for this comment.
  >

  Have your resolved your error?

  If not, or for others in your so first paragraph:
  

  You not compare function for anything so try to SEE
  convert the returned value "below" in this case true or false.
  that is a Boolean and failing value. If she tells you that it cannot
  convert "down" to a Boolean.

  Now, it would give him no problem.

  But then I don't know what is really stable.

• How to pass the Boolean values of a façade in other block?

  Hi all

  I have a main façade with several Boolean button for example:

  N1-dncc-01

  N1-dncc-02

  N1-dncc-03

  -

  -

  -etc. And for each option, I event structure that calls the other program of labview in subgroup of experts.

  So now that my problem is when I pressed the button dncc-n1-01 its Boolean values should be passed to the program which I am calling the Sub-group of experts.

  So, it is possible? I tried with ref and property of node, but I failed. I guess that I am not on the correct path.

  Thanks in advance

  Pals