Flattening of PDF forms after the form has been saved with extended drive features

Similar Questions

• Is there a way to allow to be saved on the name of the PDF (replaced) after the document has been saved at once?

  Once a person has saved a fillable PDF on their computer and entered information, close the document, and then reopen to add more information, they get an error to tell Adobe Reader, "the document could not be saved.  Unable to save this file name.  Please save the document under a different name or in a different folder. "The machines in question using the Windows platform.

  We had the same problem in our society, and the next thread help us solve our problem:

  Thanks to KevinCur.

  Error in saving one. PDF file to a mapped drive

  "It has to do with protected mode."  I don't know if he was turned off by default, & now it's on with the update, but turn off changes in behaviour of Adobe Reader back to what users expect - a guest to warn you if you want to replace the existing file, and then click Yes to replace.

  To disable the Protected Mode:

  Start Adobe Reader

  Edit - Preferences - security (enhanced)

  Uncheck the enable Mode at startup protected

  Close preferences & narrow drive.

  We have disabled the 'enable protected at Startup Mode' box--> Yes--> OK.  Our users are happy now.  ^_^

• I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  It seems that your version is not the latest.

  Check help / about... what version it reads.

  It should be 2015. (9.2.0 build 41)

  Otherwise, please update your version via app updates... or cloud in respect of aid.

• Digitally sign is gray in CD player unless the document has been saved with Reader Extended PDF - option activate more tools in Acrobat. Is the feature to sign without options Reader Extended broken or has it been removed?

  If we just save a PDF document, users with CD Player cannot sign because the option "digitally sign" in the upper part of the certificates bar is grayed out. According to other information that I read, the ability to sign with earlier versions of the player requires the PDF file to be registered as a Reader Extended PDF with the option enable the tools more. If I save the document in this way, our DC users can sign it. We took the latest version (2015.008.20082). This feature - the ability to fill/sign a regular document (no Reader Extended PDF) - has been removed in later versions, or is it a bug that was not shown or even fixed?

  You can use fill & sign on documents without the form fields.

• After the computer has been infected with virus win32/cutwail.BA computer is very slow at startup

  My computer is infected with this wirus and my wirus program can not take it away from the computer, it make the computer very slow at the beginning, what should I do?

  Hi Andersjohansson,

  Method 1: To fix the performance issue, follow the steps mentioned in the link below

  Optimize the performance of Microsoft Windows Vista

  http://support.Microsoft.com/kb/959062

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Run Microsoft Security scanner (MSS) for any threat of remnant and try to correct

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Infected files can be deleted from your computer; There is a chance of data loss.

• Exception of Tomcat may not call sendError() after the response has been committed

  CF 10 Developer Edition.

  Windows XP SP3

  When you submit a page that worked well in CF 7 on this machine, I get an error that I've never seen elsewhere:

  ==================

  HTTP 500 - STATUS

  Description: the server encountered an internal error () that prevents to satisfy this demand.

  exception:

  javax.servlet.ServletException: ROOT CAUSE: java.lang.IllegalStateException: cannot call sendError() after the response has been committed to org.apache.catalina.connector.ResponseFacade.sendError(ResponseFacade.java:451) to javax.servlet.http.HttpServletResponseWrapper.sendError to coldfusion.tagext.io.cache.ehcache.GenericResponseWrapper.sendError (GenericResponseWrappe r.java:91) at coldfusion.filter.FormScope.parseQueryString(FormScope.java:501) (HttpServletResponseWrapper.java:1 20)

  etc., which ends in

  Note Track of the full stack of the root cause is available in the Apache Tomcat/7.0.23 logs.

  ===================

  I can't seem to be able to debug or to locate this error: cfabort placed at strategic locations doesn't help at all, and none of my usual work. Debug information are not displayed when this error occurs (although the server is configured to display debug information, and she normally does).

  Totally puzzled.

  LBPSlava

  Maybe adjust the number Maximum of say 100 to 500 POST request parameters.

  CF10admin > server settings > settings > request size limits > Maximum number of MESSAGE request settings > value

  Not sure, you may have to restart CF10 for change to be applied.

  HTH, Carl.

• "The project has been saved in a newer version of premiere pro and cannot be opened in this version."

  Hi, when I try to open a file first said "the project has been saved in a newer version of premiere pro and cannot be opened in this version."

  The thing is: I opened the file in the latest version on a new computer when I newly installed Adobe so this may not be true... What can I do?

  Thanks in advance.

  

  Are you sure of his on the latest version. You can check this in Help / about...

  It should read 2015.1 (9.0.1 build 174)

  Might want to hit the option updates which is also the title of help.

• I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  Hi rgarden95,

  Can you please confirm the exact version of Muse, you open the file with?

  To check the version of Muse, please click Help-> on Adobe Muse CC.

  Kind regards

  Akshay

• "Kick" application user after the password has been changed.

  Version of Application Express 4.2.4.00.08 apex

  
  I would like to "kick" current application user once the password has been changed in the database.

  I've customized auth which takes the database password.

  Currently if someone enters my application > after that I change his password > it is still able to go through the application and present things

  I want to make is that after I change his password for the current user gets "expelled" from the app to the login screen.

  Para wrote:

  Version of apex Application Express 4.2.4.00.08

  I would like to "kick" current application user once the password has been changed in the database.

  I've customized auth which takes the database password.

  Currently if someone enters my application > after I have change password > it is still able to go through the application and present things

  I want to make is that after I change his password for the current user gets "expelled" from the app to the login screen.

  Capture logon after user/password hash and store it in a part of the application. Create a On Load: before header process application which runs under condition if the hash of password/user session is different from the one currently in the database, the call apex_custom_auth.logout . This will disconnect the user on the first page is rendered after the password is changed, but will (in most cases), save the changes before you do.

• ACDSee... The registry has been tampered with...

  Hello..

  Installed in 3, 2, ACDSee Pro, ACDSee 12, 11, 10, and ACDSee 2009... BUTTTT

  The registry has been always been tampered with (the problem occurs with all versions)

  This problem occurs with (Windows XP, Windows Vista & Windows 7)

  I need a solution

  Hello Samir,

  Check these discussions:

  http://community.ACDSee.com/forums/topic/ACDSee-Pro-25-quotregistry-has-been-tampered-withquot-message

  http://community.ACDSee.com/forums/topic/registry-has-been-tampered-with

• Satellite L300D begins only after the battery has been drained and recharged

  I have a satellite L300D that has a problem at startup. Last week, it closed but got stuck on the "Disconnect" screen for a long time. Finally I manually turn it off by holding down the power button. Don't think no more of him it happened sometimes with my computers. However, when I went to turn it back on - it was nothing. Power lights came to the front of the computer, but not to screen at all. Could not even access the BIOS. Nothing. It was like that for several days.

  Tried all the common solutions - removed battery, disconnect the power supply and press the power button - still nothing. Tried w/o - just AC, just the battery. Even stripped down to the motherboard to see if I could remove the CMOS battery and reset the CMOS but it is soldered on the motherboard. Put all back together, still nothing.

  Finally, I had to recharge my cell phone using a USB adapter and given that the computer had power I tried the usb port and it worked (for example, I could charge the phone - still no screen on the computer). The computer's battery is dead and I plugged it in. That evening, after the battery was full, I tried the computer and it has perfectly worked. Started correctly, shut it down, restarted and it was fine. Unplugged this night there and reconnected again in the morning and... nothing. Just a black screen. No BIOS.

  Killed the battery again then reloaded and now my computer is working again.

  Any ideas on what could cause this problem?

  Thanks in advance.

  Hey Buddy,

  In my opinion her only the only one you can is update the BIOS like Akuma suggested. This problem is not related software so that s the only option you have I think. You can download the latest version of the BIOS here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If this is not the case, contact an authorized service provider please. Guys can fix all this hardware related problems can diagnose this problem. Maybe the motherboard or something else must be exchanged.

  Good luck! :)

• Insert my backed up data after the system has been restored.

  I have a four-year-old desktop HP Pavilion p6226f and am on Windows 7. A few days ago I had to restore my PC to factory conditions. I backed up my data files through the process in the Recovery Manager, on 3 DVDs.

  Is there a utility on my computer that manages the process of insertion of my files on my computer?

  Thank you in advance for your help!

  Update, December 30, 2013:

  Although Jaco has been more than helpful with this issue (read the thread for lots of great ideas and he provided information), I marked by error this issue having been resolved while he was not. I don't know how United Nations brand it, if I add this note.

  I thought, when I got the link to get instructions from HP, I got everything that I had to this summary. That was not the case. So, my apologies. I shouldn't be marked as resolved until what I had followed the process to the end. I'm still stuck in the same exact spot.

  Hello

  Sorry for the inconvenience, but please, use this link. The previous link was for Windows Vista. This link is for Win 7.

  You are the very welcome.

  Happy computing!

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.

  Want Phoenix 810-150se, Intel i7 4820 k
  12 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.

  HP 560z CTO AMD processor / chipset.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.

  HP ENVY 17 t-j000 CTO Quad Edition laptop. Win Pro 8.0

• Space not to be released after the table has been truncated.

  Hi all
  
  I've truncated at a table, but the space is not to be released after the truncation is done. Tried several option for relased back space that nothing works. Please can you help out me.
  
  SQL > select * from v version $;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  PL/SQL Release 10.2.0.4.0 - Production
  CORE 10.2.0.4.0 Production
  AMT for Solaris: release 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production
  
  SQL > /.
  Enter the value for the owner: CMSPRD
  Enter the value 1: WEB_LOG
  4 old: where the owner as ' & OWNER ' AND nom_segment = UPPER ('& 1')
  4 new: where the owner as 'CMSPRD' AND nom_segment = UPPER ('WEB_LOG')
  
  OWNER NOM_SEGMENT SIZE_IN_M
  ------------------------------ --------------------------------------------------------------------------------- ----------
  NOM_TABLESPACE SEGMENT_TYPE NOM_PARTITION
  ------------------------------ ------------------ ------------------------------
  CMSPRD WEB_LOG 601.515625
  OWDATA TABLE
  
  SQL > alter the movement line of table WEB_LOG enable;
  
  Modified table.
  
  SQL > truncate table WEB_LOG;
  
  Table truncated.
  
  
  SQL > analyze table WEB_LOG statistics calculation.
  
  Parsed table.
  
  SQL > ALTER TABLE WEB_LOG DEALLOCATE UNUSED;
  
  Modified table.
  
  SQL > ALTER TABLE WEB_LOG shrink space;
  ALTER TABLE WEB_LOG shrink space
  *
  ERROR on line 1:
  ORA-10635: Type of invalid segment or tablespace
  
  
  SQL > select count (*) in the WEB_LOG;
  
  COUNT (*)
  ----------
  0
  SQL > select sum (BLOCKS) from dba_tables where TABLE_NAME like 'WEB_LOG' and the OWNER as "CMSPRD."
  
  SUM (BLOCKS)
  -----------
  0
  
  SQL > select blocks 'Never used', empty_blocks 'Never used', 'Total of lines num_rows. "
  from user_tables where table_name = 'WEB_LOG '; 2
  
  Never used never used Total lines
  ---------- ---------- ----------
  0 76993 0
  
  SQL > select SUM (blocks)
  dba_extents 2
  3 nom_segment = "WEB_LOG";
  
  SUM (BLOCKS)
  -----------
  76994
  
  SQL > select MIN_EXTENTS from dba_tables where table_name like 'WEB_LOG ';
  
  MIN_EXTENTS
  -----------
  1
  
  SQL > @os
  Enter the value for the owner: CMSPRD
  Enter the value 1: WEB_LOG
  4 old: where the owner as ' & OWNER ' AND nom_segment = UPPER ('& 1')
  4 new: where the owner as 'CMSPRD' AND nom_segment = UPPER ('WEB_LOG')
  
  OWNER NOM_SEGMENT SIZE_IN_M
  ------------------------------ --------------------------------------------------------------------------------- ----------
  NOM_TABLESPACE SEGMENT_TYPE NOM_PARTITION
  ------------------------------ ------------------ ------------------------------
  CMSPRD WEB_LOG 601.515625
  OWDATA TABLE
  
  
  There is no change in the tablespace space remaining before or after truncation.

  What is the result of
  Select owner, segment_name, SUM (blocks), sum (extent_id) from dba_extents nom_segment = "WEB_LOG" group by owner, nom_segment;

  and

  Select num_rows, initial_extent, table_name, owner of dba_tables where table_name = 'WEB_LOG ';

• I can't activate a VM XP, I have a VLK license but the machine has been built with an oem license.

  I can not activate a virtual XP machine.  the virtual machine is a clone of a pc that has since been erased.  the original machine was probably activated with an OEM key.  I tried activating by phone and putting our license key of Volume without success.

  I would be grateful for any suggestion.

  Thank you very much

  Heh!

  The key to the report is an OEM_SLP key, rather than a Volume key-

  The key of COA_SLP supplied with the original computer cannot be used to enable this virtual machine either, because he reuires to use on the original material.

  You can not use a license upgrade for the virtual machine, because there is no base license - so you are limited by the terms of the Windows license using a retail for Pro license, and then upgrade which (if necessary).

  The key here is most likely another valid - but installation is almost certainly classified as non-authentique, due to the presence of the multitude of the OEM.s in the BIOS - unless you use XP Mode in a Win7 machine

• Webcam works only with Windows 7 after the computer has been cleaned.

  original title: Webcams

  I had to get my computer cleaned. After it was cleaned the windows installed person 7. I used Vista. I have a webcam built into my computer. I used to be able to use it to take photos and videos. Now, I can't. When I search for the webcam all I can find general information about it and its properties. Anyone know how I can get my webcam back up the way I used too?

  Hello

  Each manufacturer of system or camera maker provides their own software to control the camera so
  You should check with their support, their books online and ask in their forums (if any).

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.