Flex 3 bases of data and large Html files

Similar Questions

• Importing a large HTML file

  The solution, of course, is to divide a large HTML file into smaller pages. But I wonder if the error was down to RoboHelp or my system configuration.
  
  The HTML file is 470 KB, extracted from a database table.

  The solution, of course, is to divide a large HTML file into smaller pages. But I wonder if the error was down to RoboHelp or my system configuration.

  The HTML file is 470 KB, extracted from a database table.

• Why have a clue and main.html file?

  Hello

  Yet another question. Why have an index.html file and a file main.html for the same web page? It seems to be different from the other...

  Thank you

  Mobie Boy

  index.HTML is a home page.

  main.dwt is a Dreamweaver template page and never needs to be uploaded to a server (unless you share the file with anyone). TPL files are only used by Dreamweaver to create child pages based on them.

  main.HTML is probably an example of child page from main.dwt (and not a secondary home page, at least, not intentionally). When you have a site defined in DW and a model defined for the site (a file .dwt in the site Templates folder), you can create pages based on the .dwt by selecting file > new > Page from the template. That selection will create a completely new page, based on the .dwt file where only the areas defined as editable regions in the .dwt will be editable in the child page. When you work with templates in DW, you can make any changes to a non-editable region in the .dwt file and it will propagate to all child pages based off of him.

  It's a nice way to make changes large site for small Dreamweaver sites. I would never recommend using a file .dwt for sites approximately 15 to 20 pages. This is where SSI should take over and make life much easier in the updating and editing Department.

• Sending data and downloading a file using as3.

  Hello
  
  I have a job application form where I users basic info such as name, email, phone not with this I'm asking him to download his CV (file doc ang)
  
  How can I publish all the data on one subject. I use PHP on the backend.
  
  I can send data and download file separately. ISIT possible to download the file and submit data at a time.
  
  Can I send additional variables with the file reference object.
  
  

  Hi guys

  I found the solution to

  http://www.flepstudio.org/Forum/flepstudio-utilities/2265-email-form-pictures-Flash-CS3-pH p.html

  Take a peek inside.

  Thank you

• Peformance Gain for a different drive for the SQL Server data and log (VM) file?

  Hello

  It is suggested to separate SQL Server 2012 data and log files in different drive for VM.  Is there a performance gain if two of them resided in the same logical (Partition VMDK) unit number?  OR should they (different dives) in different LUNS (Partition VMDK)?

  Thank you

  The General mantra in the physical world goes as follows:

  For optimal performance, you need to separate logs and database of transactions on different physical disks (e.g. disks) stacks.

  
  

  This general concept applies naturally agnostically to virtual workloads as well. It essentially translates to:

  For performance, you should put the files of database transactions on various resident on different LUNS VMDK or use separate RDM. You should also use a separate vSCSI controller to each VMDK/RDM as the controller has its own IO queue.

  There is a point more important which is often neglected in the physical and virtual world in particular:

  Ideally, you should make sure that your physical LUN for logs and DB are not a group of common disk same stacks of physical disks. This violates the general concept above.

• Date and time of file Excel data import

  I'm running into problems of import of dates-hours format 15/03/2010 21:30 using SQL Developer. In step 1 of the import data wizard, the data preview window displays all fields date dates Excel (for example, 40252.89583 instead of 15/03/2010-21:30). I can SQL Developer to recognize the data in the format of date and time, rather than convert them to decimal values?

  When you import from Excel, I have not found a date format model that would transform their decimal number into a date Oracle. But the following seems to work well:

  1. save the Excel page in a CSV file, and then in the import wizard SD, you can enter the date format for this column model.

  2. in Excel convert this column of text. (Highlight your date column, choose the menu item 'Data', 'Data tools' group choose the 'Text to columns' tool, click next / next / then click on the 'Text' button, click on 'Finish' and save your xls) Now in the import of SD Wizard simply enter the date format model that corresponds to the column of 'text' Excel with your dates.

  Anyway seems to work for me.

• Cannot find the Panel bases of data and links. How to connect to my databases on the other?

  Hello

  I'm a noob in Web development and I have this problem that is mentioned in the title. I triied to install the add-on, but it did not work. I want to read my data from my database. What can I do?

  OK problem solved, installed the extension. Thanks for your help. Please close theard, thank you.

• superimpose the date and time of file mts

  It is possible to superimpose the date information and time is embedded in a file during playback mts

  Well sort off: timecode. Under the key in the program monitor, you will find the overlay and Overlay settings.

• Add XMP data and store the file

  Hi, I tried with the following code. But unfortunately the datas added is not stored.

  Where I did a little bit?

  int main(int argc, char* argv[])
  {
      if(argc != 2)
      {
          cout << "Invalid numbers of arguments!" << endl;
          cout << "Usage: " << argv[0] << " [FILENAME]" << endl;
      }
  
      // initialize XMP Toolkit
      if(!SXMPMeta::Initialize() || !SXMPFiles::Initialize())
      {
          cout << "Failed to initialise XMP Toolkit!" << endl;
          return 1;
      }
  
      XMP_OptionBits opts = kXMPFiles_OpenForUpdate | kXMPFiles_OpenUseSmartHandler;
      SXMPFiles file;
  
      string fileName = argv[1];
      string transcriptionFileName = fileName.substr(0, fileName.find_last_of('.')) + ".txt";
      string transcription;
  
      cout << "Opening files " << fileName << " and " << transcriptionFileName << endl;
      // first check if files exist
      if(!fileExists(fileName.c_str()))
          return 1;
  
      transcription = readStringFromFile(transcriptionFileName);
  
      bool ok = file.OpenFile(fileName, detectFiletype(fileName), opts);
      if(!ok)
      {
          cout << "No smart handler available for " << fileName << endl;
          cout << "Trying packet scanning..." << endl;
          
          // Now try using packet scanning
          opts = kXMPFiles_OpenForUpdate | kXMPFiles_OpenUsePacketScanning;
          ok = file.OpenFile(fileName, detectFiletype(fileName), opts);
      }
  
      if(ok)
      {
          // preparing variables
          SXMPMeta meta;
          char buffer[255];
  
          cout << "Retrieving metadatas..." << endl;
          file.GetXMP(&meta);
          
          meta.AppendArrayItem(kXMP_NS_Script, "dialogSequence", kXMP_PropValueIsArray, NULL, kXMP_PropValueIsStruct);
          meta.SetProperty(kXMP_NS_Script, "dialogSequence[1]/xmpScript:character", "SPRECHER", NULL);
          meta.SetProperty(kXMP_NS_Script, "dialogSequence[1]/xmpScript:dialog", transcription, NULL);
  
          string schemaNS, propPath, propVal;
          SXMPIterator iter(meta);
          while(iter.Next(&schemaNS, &propPath, &propVal))
              cout << schemaNS << " " << propPath << " = " << propVal << endl;
  
      }
      else
          cout << "Failed retrieving metadatas!" << endl;
      
      cout << "Closing file..." << endl;
      file.CloseFile();
      
      cout << "\n=== Finished ===" << endl;
      return 0;
  }
  

  Could you be it anyone of you please tell me why the file is not updated. Maybe I was wrong with 'meta. SetProperty "?

  Floh Cu

  Found the solution.

  Before closing the file I had to add the following line:

  file. PutXMP (meta);

  Now, the data is written to the file.

  Floh Cu

• Access the Blob of Table data and save to file local system

  I have a table that has a blob column in which most of the regular file types are downloaded and stored.
  
  What is the best/better way to select/query this table and write all of the content of the BLOB in a local file system?
  
  Using oracle 10.2.
  
  Is it possible to sort the batch and save them on my local drive?
  
  Any help is appreciated.
  
  Thank you.

  Try to reset the l_pos to 1 for each iteration in your loop of file name:

  create or replace procedure save_to_file_third
  is
   l_file      utl_file.file_type;
   l_buffer    raw(32767);
   l_amount    binary_integer := 32767;
   l_pos       integer := 1;
   l_blob      blob;
   l_blob_len  integer;
   myfile_name varchar2(250);
  
   cursor c1 is
    select id from security where file_name1 is not null;
  
  begin
  
   for i in c1 loop
    -- Get LOB locator
    select file1, file_name1
      into l_blob, myfile_name
      from security
     where id = i.id;
  
    l_blob_len := dbms_lob.getlength(l_blob);
    l_pos      := 1;  --re-init l_pos var
    -- Open the destination file.
    l_file := utl_file.fopen('MY_FILES', myfile_name, 'wb', 32767);
  
    -- Read chunks of the BLOB and write them to the file
    -- until complete.
    while l_pos < l_blob_len
    loop
     dbms_lob.read(l_blob, l_amount, l_pos, l_buffer);
     utl_file.put_raw(l_file, l_buffer, true);
     l_pos := l_pos + l_amount;
    end loop;
  
    -- Close the file.
    utl_file.fclose(l_file);
  
   end loop;
  exception
   when others then
    -- Close the file if something goes wrong.
    if utl_file.is_open(l_file) then
     utl_file.fclose(l_file);
    end if;
    raise;
  end save_to_file_third;
  

• I want to display and print HTML file I recorded on my hard drive.

  On the Symantec Web site, when I clicked for more information, he has opened a web page, but the Firefox menu did not appear in the upper right corner. I wanted to print the page. I right click to save the page on my hard drive. I still want to print it. What should I do?

  In almost all situations, Ctrl + p should call the print dialog box. (Unfortunately, there is not a similar shortcut to go to preview before printing, so you can see what you will get.)

• . DAT and. EXE

  My first app, I have just thinapped.

  I read earlier on. DAT files created with. EXE files if they become too big.  Well, my first app thinapped created the. DAT and. EXE files.

  I also read that you can simply rename the. DAT file. EXE.  Is this wise?  I'll always have two files, either. DAT and .exe or two .exe files.  Is this correct?

  It is correct that. DAT files are actually "renowned". EXE files. They are very practical if you have for example a bubble office and you want to make the included separate accessible applications. Have word for example being "large container" means that anyone can start word...

  If you check the package file, you will see that it references the local CMD.exe. It is a question also then it is possible to navigate within the 'bubble' and possibly extract information such as operas or similar (if you are not aware, it's possible). If you have a dummy application (we created one) you could include this in your bubble and redirect the reference, so that it shows only a ' sorry, this is a placeholder... Please start the applications of link! ".

  If there is interest in the 'dummy app/space reserved", to speak and I will attach it...

  Kind regards

  Michael Baars

• How can I the date and time using regular expressions

  Hi all

  I have depolyed filtering the log agent. While setting properties, I would like to recover the file that is generated at the present time, but along the way, I am unable to define, what regular expression that I provide retireves date and time specific file...

  Leave with kindness, men know is it possible to do?

  Thanks in advance.

  Shiva

  This seems to be the same question I can't add a timestamp in logfilter, so I'll answer in this thread. Please check the two wires as "Answered" when the issue has been resolved.

  Kind regards

  Brian Wheeldon

• How to load the date and time from text file to oracle using sqlloader table

  Hi friends
  
  I need you to show me what I miss loading date and time text file in a table oracle using sqlloader
  
  It's my data in this way (c:\external\my_data.txt)
  

  7369,SMITH,17-NOV-81,09:14:04,CLERK,20
  7499,ALLEN,01-MAY-81,17:06:08,SALESMAN,30
  7521,WARD,09-JUN-81,17:06:30,SALESMAN,30
  7566,JONES,02-APR-81,09:24:10,MANAGER,20
  7654,MARTIN,28-SEP-81,17:24:10,SALESMAN,30

  my table in the database emp2
  

  create table emp2 (empno number,
                    ename varchar2(20),
                    hiredate date,
                    etime date,
                    ejob varchar2(20),
                    deptno number);

  the code for the control in this path (c:\external\ctrl.ctl) file
  

  load data
   infile 'C:\external\my_data.txt'
   into table emp2
   fields terminated by ','
   (empno, ename, hiredate, etime, ejob, deptno)

  This is the error:
  

  C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
  
  SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Commit point reached - logical record count 5
  
  C:\>

  any help that I enjoyed
  
  Thank you
  
  Published by: user10947262 on May 31, 2010 09:47

  load data
  INFILE 'C:\external\my_data.txt '.
  in the table emp2
  fields completed by «,»
  (empno, ename, hiredate, etime, Elysa, deptno)

  Try

  load data
   infile 'C:\external\my_data.txt'
   into table emp2
   fields terminated by ','
   (empno, ename, hiredate, etime "to_date(:etime,'hh24:mi:ss')", ejob, deptno)
  

  This is the error:

  C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
  
  SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Commit point reached - logical record count 5
  
  C:\>
  

  This isn't a mistake, you can see errors in the log file and bad.

• The html file size

  Hello

  In dreamweaver how does one check the size of the file and the html file?

  Bob

  Rik is quite right, but that number may be misleading because it does not include scripts, images, and other files of dependant who uses the page.  For example, a 6 KB html file could really be 419 KB when loading in browsers.

  If you want a free analysis of the actual size / speed of your page, have a look at the link below.

  http://www.websiteoptimization.com/services/analyze/

  Nancy O.