. DAT and. EXE

Similar Questions

• Not will not be up-to-date and exe. files as well as several other programs won't work after that I removed the Trojan horses today.

  I have two problems that first will not to day and exe. files as well as several other programs will not work after removing six Trojans today. I got the old fake security / you're not protected message led me to run McAfee and anti-malware that I solved the problem. It allowed me to meet Explorer but I tried to open the accessories of the calculator and it will not work, nor will my Rossetta stone. I can open these types of files under other users account on this computer. Help please.

  I suggest that you create a new user account for yourself (save all your files first of all that I hope are not damaged etc.). Then, you delete the old user account (but keep the files). Probably most of the programs have been installed for all users, so it should not be (I hope) a problem.

  Recently had to clean a computer infected with one of these software etc. rogue security and creating a new account (Administrator) so that the user has finished up and transfer its files to the new account. He was lucky. I hope you are too.

  Perhaps others may have other suggestions for you.

  Please make sure that the computer is clean of any infection etc.

  K

• HP EliteBook 840 G3: Impossible to find acquisition of ICP data and Signal Processing controller, memory controller, PCI and SM...

  Hello

  I can't find acquisition of ICP data and Signal Processing controller, memory controller PCI bus controller SM for HP EliteBook 840 G3 running Microsoft Windows 7 Enterprise (64-bit).

  Any help is greatly appreciated!

  Hello:

  See if this driver works...

  FTP://ftp.HP.com/pub/SoftPaq/sp74001-74500/sp74152.exe

• HP 15-r212nv (Energy Star): acquisition of ICP data and Signal Processing controller

  There is a device in the device manager that recognizes my phone and I can't find drivers! Acquisition of ICP data and Signal Processing controller.  I searched the web, but nothing.  My laptop is HP 15-r212nv model and I'm under 64-bit Windows 10.

  Thanks in advance

  Hello:

  See if this driver works...

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71262.exe

• Is function like the function of date and time picker in the ICB 8.5?

  I need the function as "date and time picker control" used in activeX, but my operating system (windows 7 Bits without office software) is not the «Microsoft date controller» and time picker I am looking article in the internet which mention this register the MSComctl2.ocx in the windows\system32, but he could not operator in my operating system (it's not allow to save the controller). Help me, please.

  Already, I discovered that the problem on the service of DTP in the 64-bit Windows 7 could not used. Because, the DTP is 32 bits, it should use the administrator to register the 'mscomct2.ocx file' which must be replace in the % windows/SysWOW64 and used the 'mscomct2.ocx regsvr32.exe"in console windows.

• "The backup file contains unrecognized data and cannot be used.

  Original title: - what are MS provides a BKF recovery tool? "The backup file contains unrecognized data and cannot be used.

  I'm trying to restore BKF files created by NTBackup.exe after the crash of a hard drive running XP Pro. The new hard drive is the same brand (WD) goes into the same computer Dell Inspiron and the same OS. No catalog file is available and trying to recreate the NTBackup recovery gives an error message.  No catalog cannot be created for many, but not all of my backup BKF files.

  I do not consider the solution of SysTools $89 for a large part of the answer. This problem is not uncommon and I hope MS has or can tell me a free tool to allow me to restore from any of my BKF.

  Thank you.

  You can take a look here: http://www.fpns.net/willy/msbackup.htm#NTBKUP

  I have no information other than what is on the web page.

• How to include the install date and time in the registry keys

  Hi all

  I hope someone can help me. I'm creating a Setup program that includes properties in the construction specifications. I also wannt to include certain registry keys to add during installation:

  1. I understand the application installation directory by providing the key to [INSTALLDIR] value. This seems to work fine and I have no problem with that.

  2. the other key I would include (but I don't know how) indicates the date and the time of installation. Is it possible to automatically include this in a (similar to INSTALLDIR) registry key?

  I look forward to your expert advice!

  Kind regards

  Larry

  Larry,

  You can configure an exe must be run after Setup is finished. So, you can write a small application using the registry functions of Windows that retrieves the current timestamp and store it in some key.

  Norbert

• problem running programs and .exe files

  computer has been corrupted (by clicking on kids')-tried malwarebytes' anti-malware scan, when I rebooted, nothing works.  I tried microsoft security, but could not access the program.  I tried the system restore, but that no longer works.  If I try to download a program, do not automatically work .exe files and my computer asks me what kind of program to run it - nothing done!  I am missing shortcuts, applications, and system files.  I can't go to the Help Center to try a new date of system restore because application helpctr.exe is not found.  Any help?

  It is likely that your .exe and other extensions have changed my virus/malware.

  There is a simple fix as long as you can open regedit from the start > run box.

  As long as you can then go (I hope I'm not breaking rules here - url not mine but very helpful)

  http://www.dougknox.com/XP/file_assoc.htm

  Download the .reg and .exe association fixes. Use ' file > import ' option in regedit for each of the downloaded files. This should solve your problems. Best regards, Dave.

• My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.

  My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.
  Recently in Egypt, changes of daylight has been cancelled and I guess that's the cause of the problem!
  Any ideas?

  If time was recently cancelled, you can go to your control panel:
  Panel-> data and time-zone (tab) >
  and uncheck the "automatically adjust clock for daylight saving time.

  Otherwise, you probably need to adjust your zone settings on your computer using Microsoft time zone Editor.

  TZEdit: <> http://download.microsoft.com/download/5/8/a/58a208b7-7dc7-4bc7-8357-28e29cdac52f/tzedit.exe >

  HTH,
  JW

• Date and time system continues to change each time the system starts.

  I noticed that the time and date of my home PC gets changed every time the system is booted. The default date is set for Jan. 2008, when in fact it should be July 2014.

  Also, my PC became slow death. I use Windows 7 on 1 GB of RAM, 250 GB PC. I used last my home PC 2 years back, but there has always been someone to use it.

  It shows the OS disk to 7 GB of free, when in fact I never installed or anything unnecessary stored on the disk of BONE; Whatever unnecessary programs were there, I uninstalled them recently, keeping just a few essential ones. After uninstalling, it shows to 7 GB of free, when in fact it should be more than that.

  I use Avast anti-virus, which I think is unnecessary, that its not to protect my PC and as other programs, too, is quite dead slow.

  The system is infected by viruses? Manually, I checked the system for viruses and clean the system of all unnecessary and, program files, but I'm still not sure whether it is a virus or a PC problem.

  I am a COMPUTER analyst, and's just done it 2 days that I use my PC at home. I could format my PC, or where applicable be buy Windows 8 with a new processor.

  Please advise.

  Thank you and best regards,

  Ralph Davidson.

  Hello

  You really need a minimum of at least 2GBs of RAM to run Windows 7 well enough.

  As you have only 1 GB of RAM, which seems to be one of the reasons why it is slow.

  Increase the physical RAM or try ReadyBoost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  Looks like you have some problems.

  Wrong Date/time

  If after you set the Date and time, and then stop and restart your machine and the time returns to the year 2008, and she did this whenever you reset, then restart the PC you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  ________________________________

  For hard disk space:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  And for general maintenance on your machine:

  You should have used Malwarebytes in previous advice here on hard drive

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary make mode safe mode with networking: AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Can restore the computer to an earlier date and now get on the desktop.

  I went to use the computer yesterday and it updated. HP laptop with windows 8.1. Then it says update failed. Today I tried to restore to a different date and it failed. Today, I tried again and came back a month. I only have windows 8 and mechanic system on it. I use to connect remotely to work. Now, when I restart it goes to a system recovery option and I have no date to select.  He asks for recovery disk, but I did not. What are my options

  I had a similar problem. I updated my computer to windows vista 7 and wanted to go back but could not not because vista wasn't a registered earlier version. Then I accidentally deleted my slui and rundll.exe and couldn't get them back because there was no previous version. Given that I have not configured a backup, I couldn't restore the computer to its previous versions or any folder.

  The only way for you to restore is if you had implemented a backup and took the opportunity to finish the backup. The backup must be on an external drive, because when you configure a backup for PC, it requires an external backup. In my case, no backup copy has been implemented. If you remember where the backup was the installation, it is what she wants.

  Since you say that there is no recovery disk, I would contact with via phone, Microsoft to see if you can return to windows 8, 8.1 No.

  As an alternative, if you look at the underside of your laptop, or on the side of your PC, you will find the product code.

  Go to http://windows.microsoft.com/en-us/windows-8/upgrade-product-key-only here.

  Download the version of windows you had when the program is in place, insert the product key and just follow the instructions the site to make you say

• International date and time

  Last week, I was in the United States and took a lot of pictures.  Now that I'm back in Australia, Photos has automatically adjusted the time and date of the pictures to what was the time in Australia, not the time it was when I took the pictures.  It's incredibly annoying.  Does anyone know how to fix this please? Thank you very much.

  Hello! I had the same problem. I took photos in Asia, some on them without location data. I imported on my Mac at home in France. And then, something went wrong with the date and time. As I've learned here for photos without location data, Photos uses the time zone of the place where you perform the import. If had imported the photos in the same zone where I took them, everything would have been fine.

  The solution was to select all the photos and then manually set their time zone in Malaysia where I took them. You can do this with "setting date and time" to the 'Image' (or 'Photos' menu, or however, it is called in English).

• Evil of the formats of date and currency in the Sierra

  I'm on MacOS in English, but I want the region settings to reflect the country I live in.

  After the passage of El Capitan in Sierra, date and currency formats broke. For example, if you set the region of Finland, the date format should be 26.9.2016 instead of 26/09/2016. Also the currency symbol must appear after the value, 4 €567,89 instead of €4 567,89.

  Days of week and months are untranslated.

  Have you checked the tab 'Advanced' for date and time formats?

  Just after the upgrade, I found that the short format for the date has been reset to include slashes, whereas I had previously removed them.

  

  My region is set to the Germany, but with the main system language set to English, the months and days of the week are in English. I can't find a way to change this.

• Can I change the date and time on my account?

  Is there anywhere on this site where I can set the details of the date and time?

  When I posted a recent issue, the date and time were incorrect IE not my country date & time.

  Thank you

  Sylvia

  PS Sorry if this is the wrong place to post this question, not that the possibilities of passage are really there?

  The date and time are universally on us Pacific time zone. You can't change it.

• How long does take to set up the date and time

  How long does take to set up the date and time

  Less than a minute.

  Settings > general > time zone > set automatically

  If this does not work, try the help in this support article > If your Apple TV will stop to display date and time on startup - Apple Support