FLEX 3 shows PCI/PCI-e invalid Test & Intel(r) HD Graphics 520 math operations Test Failed

Similar Questions

• PCI-6132 self-test failed

  My card PCI-6132 at some point began to generate error (code error-50400) during the race. It does not pass to the MAX OR self-test with the same error code. As I see that one of the chips, I think it's a shame. We bought a long time ago, so the warranty has expired. So my question is what it can be caused by? And how can I avoid this in the future? Can it be fixed or I just replaced this card?

  I apologize for my previous post, which indicates that this type of behaviour can be expected.  I want to clarify that we certainly do not expect these damage with our products during operation in the specifications.

  I encourage you to contact OR by phone to set up an RMA for the Board so that it can be repaired and futher diagnostic.

• Pavilion 2206TX: hard drive DST short test failed

  Hard drive DST short test failed.

  For a few days, my laptop is not starting.

  Run the diagnostics showed "hard drive DST short test failed.

  I removed the hard drive [brand Toshiba] and connected as an external drive to a Mac.

  I am able to access your hard drive and copy some content from it. So, it looks like a problem with the hard drive.

  Is this a problem with the connection of harrdisk to the motherboard or with the hard drive itself?

  Help, please.

  Hello
  
  Yes, you can use your friend recovery media in your. It should work.
  
  I'm not able to find a recovery media for your model of third-party vendors too.
  
  No, you can't create USB recovery by plugging the old drive as external references to another PC. You have to use HP application recovery manager supplied with your laptop and create a set. I think that you will not be able to do from a failing drive.
  
  Concerning
  
  Visruth

• PCI-5922 self-test error-223431

  I try to reset PCI-5922 OR MAX and get the error code 80040383:

  "There was a problem of resetting the device."

  Then I try the automatic test of NOR-MAX and get the State Code:-223431

  "The self test failed.

  State code:-223431

  Internal software error has occurred in the extended software. Please contact National Instruments. »

  I have tried following th:

  1. reboot the computer

  2. Uninstall and reinstall OR-Scope 15.1.1

  3. change of PCI slot

  After a few tries it turns out that the problem was in the computer. When it is installed in a different computer, the PCI-5922 worked properly.

  Now, it seems obvious: when troubleshooting

  1.) install the Board in another computer

  2.) install another identical sign (if you have one) in computer suspiciuous

  Yonathan

• Can you get a sata adapter and replace it with a PCI Express so I can install a graphics card in the caddy hd for my laptop. Y at - it means to get an internal or external graphics card?

  Hey!

  I know that you can remove a dvd cart and replace it with a HD you can get a sata adapter and change a PCI express so I can install a graphics card in the caddy hd for my laptop. y at - it means to get an internal or external graphics card? I do not have a slot express pci laptop because a laptop is relatively new.
  
  Original title: laptop computer graphics card
  other cool mods I can do for my laptop. I've already upgraded to ssd and ram and processor.

  Hello

  I do not know such an adapter exists, but it's a hardware problem - I suggest you contact the manufacturer of your laptop with this issue, as well as questions about additional upgrades, you could do.

  These are all the hardware problems, and this site deals with software issues related to the Windows operating system. I'm sorry this isn't the answer you're looking for, but...

  Let me know if this helps you.

  Kind regards

  BearPup

• test fails when building - flex-pmd-ruleset

  Hi, I followed the developer documentation for how to generate the project in step 7 that fails because the following tests fail inside flex-pmd-ruleset:

  Tests failed:
  testProcessViolatingFiles (com.adobe.ac.pmd.rules.unused.UnusedLocalVariableRuleTest)
  testBuildMessageName (com.adobe.ac.pmd.rules.core.EmptyRuleTest)
  testProcessViolatingFiles (com.adobe.ac.pmd.rules.naming.WronglyNamedVariableRuleTest)
  testProcessViolatingFiles (com.adobe.ac.pmd.rules.unused.UnusedPrivateMethodRuleTest)

  Tests: 219, failures: 4 errors: 0 ignored: 0

  [INFO] ------------------------------------------------------------------------
  [ERROR] BUILD FAILURE
  [INFO] ------------------------------------------------------------------------
  [INFO] There are test failures.

  I don't know how to correct these failures, clues as what may be the problem? I have run "mvn package" flex-pmd-parent of the command line.

  TIA,

  Magnus

  I use 1.5 as a JAVA virtual machine indeed.

  You can synchronize again, please?

  All the differences using mvn install?

  Xavier

• SMART short Self Test Failed - (error code: WHD16-8NR)

  Hi all

  I had my XPS L520X for 4 years and 2 months. I've never had a problem with its operation until last week. Randomly, it restarted and came with the PCI Realtek issue when it restarts.

  To cut a very long story short Fault find it which is going on, I reinstalled the entire operating system, including formatting of the hard drive.

  The problem of the laptop different freeze/crash and reboot with erros while doing normal tasks has not been resolved.

  I have run the Dell support center software and it shows the auto SMART test failed with the following code (error code: WHD16-8NR).

  Event log:

  Dell Support Center log file
  March 17, 2016 16:53:55
  Overall result: failed

  -------------------------------------------------------------------------------------------------------------------------------------------
  ST9750420AS [ATA:0:0\\?\ide#diskst9750420as___0005dem1#4&34e0611c&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b]}
  -------------------------------------------------------------------------------------------------------------------------------------------

  Seller: Seagate
  Model number: ST9750420AS
  Serial number: 6WS100EG
  Firmware revision: 0005DEM1
  Size: 698,6 GB
  Rotation speed: 7200 RPM
  Cache size: 16 MB
  Temperature: 43 c
  Physical sector size: 4 KB
  Logical sector size: 512 B
  Count of logical sector: 1465149168
  Supported standards: ATA8-ACS, ATA/ATAPI-7, ATA/ATAPI-6, ATA/ATAPI-5
  Specification Version: Rev ATA8-ACS 4

  ----------------------------
  OS - C: [PARTITION:C\\.\C:\]
  ----------------------------

  File system: NTFS
  Volume serial number: 5087-8802
  Volume capacity: 679.00 GB
  Amount of free space: 568,63 GB
  Volume space used: 110,37 GB

  Test of the SMART State

  Test started - 17/03/2016 16:43:57
        
  Finished test:-17/03/2016 16:43:59
  Past

  Test of SMART thresholds

  Test started - 17/03/2016 16:43:59
        
  Finished test:-17/03/2016 16:44:01
  Past

  Targeted reading test

  Test started - 17/03/2016 16:44:01
        
  Finished test:-17/03/2016 16:44:05
  Past

  Try to search randomly

  Test started - 17/03/2016 16:44:05
        
  Finished test:-17/03/2016 16:44:54
  Past

  Funnel Seek Test

  Test started - 17/03/2016 16:44:54
        
  Finished test:-17/03/2016 16:46:14
  Past

  Short what SMART self-test

  Test started - 17/03/2016 16:46:14
        
  Error message:-17/03/2016 16:46:24
  The unit has reported the following State: the previous self-test completed having the read element of the test failed.
  Error message:-17/03/2016 16:46:25
  The first default LBA value is 121243744 and the failure occurred after that the device was working since 8792 hours under tension.
  Finished test:-17/03/2016 16:46:26
        Failed (error code: WHD16-8NR)

  Surface Scan Test

  Test started - 17/03/2016 16:46:26
        
  Finished test:-17/03/2016 16:47:25
  Past

  Surface Scan Test - 2

  Test started - 17/03/2016 16:47:25
        
  Finished test:-17/03/2016 16:48:58
  Past

  I also went in the BIOS BOOT MENU by pressing F12 at startup and ran diagnostics that seemed to have said everything going, however I saw a mistake, faliure in its process that was too fast for me to write the error.

  In a nutshell, my thought is that my hard drive has failed / is corrupted or is about to fail.

  My simple question is, do I need a new hard drive with the information I've provided?

  Thank you very much!

  To all those who read this topic:

  I rang Dell directly and they confirmed my hard drive needs to be replaced.

  8792 power over time, I think that its actually me good.

  Bravo and thanks for the reply ejn63

• Compaq presario v6000 v6409tu disk hard bios self-test fail

  Hello

  Windows xp no my pc compaq v6000 not starting and bluescreen showed a couple of times. I ran the BIOS (phoenix) disk hard diagnosis and the test failed. When I opened my HDD I noticed green rust as deposits into the connector on the hard drive. After cleaning with a brush, computer loaded XP successfully. But an hour later, while I was surfing in mozilla suddenly the mouse pointer started late and showed computer blue screen saying that windows has been closed down to prevent damage.

  I would be grateful if someone can tell me if it's a software problem or hard drive error. If I need to replace my hard drive, what are my options, for example. rpm, capacity, provider? Thank you.

  The only way you could have rusted copper into the connector on the hard drive is if liquid got in there so I am reluctant to try to speculate how much damage has been done. I remove the hard drive and connect it to the outside to another computer and run chkdsk on it to see if the drive itself is bad. As long as there is a problem on the part of connector and the interface with the motherboard cannot really trust the onboard hard drive Diagnostics. You could also get an own another new hard drive adapter.

  http://www.eBay.com/ITM/new-Compaq-Presario-C700-F500-F700-V6000-SATA-laptop-hard-drive-connector-/161297513053?PT=US_Drive_Bay_Caddies & Hash = item258e14ba5d

  If it does not turn on the hard drive is bad, you can replace it with any laptop SATA drive no more than 9.5 mm thick.

  http://www.Newegg.com/product/product.aspx?item=N82E16822145587

  Above is a good thing. It is slim (7mm) but it will still go into the caddy and connect to the motherboard with the connecting piece. If the hard drive itself is always good, and you replace the connector piece but he always bluescreens, so I would not spend money on a new hard drive. I would say that there was damage to the motherboard.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Hard drive test failed in the HP pavilion dm4 1041tx and HDD 0303 fast 1

  starting problem in my laptop,

  showing hard disk test failed...

  Error Msg: "fast hard disk 1"(0303) "

  Hello

  303 error seems to indicate that the drive is defective and must be replaced - it is also compatible with your startup problem.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• What is PXE - 61 media test failed error and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop

  I have a lenovo computer. I began as routine but unfortunately it says error:-what is media test failed error PXE - 61 and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop computer? How do I prevent this.

  Kala

  Hello Mohan,

  ·         You did changes to the computer before the show?

  These errors often occur if there are incorrect BIOS (Basic Input\Output System) settings.

  Method 1: Check if the computer startup options are changed in the BIOS. You can set the hard drive as the first boot device. In addition, make sure that this option "Wake on LAN" or one similar to it is off.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer.

   

  Important : Change/update BIOS can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

• Targeted Read Test failed [error code: WHD16-CSB]

  I use a DELL Inspiron N530 desktop computer. Is my hard drive model: WDC WD2500AAJS-75VWA0 device. When I run a test of hardware of Dell Support Center. It showed the following error:targeted read Test failed (error code: WHD16-CSB)

  The unit has reported the following State: the previous self-test completed having the read element of the test failed.  The first default LBA value is 20750407 and the failure occurred after that the device was working since 23398 hours under tension. Failed (error code: WHD16-CSB)

  Please help me find a solution.

  The reader is 23398 market h years.  Thats 974 days or years 2.67.   If the drive is probably dying if not dead.

  Western Digital WD2500AAJS Caviar Blue drive is very common and inexpensive.

  The standard OEM warranty on these discs is 1 year and the retail warranty is 3 years from the date of manufacture if
  you do not have a retail receipt.

• Dell Latitude c400 laptop IDE Disk/IDE reference check tests fail

  Hi, I'm not a technical expert, but a student of the University 1 forty years. I hope someone can help me. My laptop was fine when I went to bed, when I woke up it was a blue screen with a message about it. with something like the checksum does not match, I ran the diagnostics tree test and the results were:

  IDE Disk Read Test Fail - Error Code ofoo:0244 message block-24794619

  IDE Verify Test Fail error code: ofoo:1 A 44 message block-24794619

  Floppy drive has a line - 1100:012 error Code

  My friend tried to re start for me using an external disc drive, but can't the words show drive not executionable. the external hard drive, I borrowed was a yamaha.

  Thank you for your time: womansad:

  
  

• I spent my evening together on this: status: failure Test failed: ORA-01017

  Hello my friends!
  
  I do not know why this error pops up, but it's here: status: failure Test failed: ORA-01017: name of user and password invalid; denied connection+.
  
  Oracle works well but I can't get SQL Developer to play ball (log in). I have not used the 32 no chance and I tried 64 with the JDK, no luck.
  
  What did I try?
  
  * 1. Google search for hours
  * 2. Tried more than 50 proposals *.
  * 3. Uninstall / re-install *.
  * 4. Change password box *.
  * 5. Check the operational database and listener has the right name in it.*
  
  I read an article about password being truncated box so I change the case.
  
  I read hundreds of threads.
  
  Does anyone know how can I fix?
  
  
  I thank everyone!
  
  
  JMan

  Just what gave you the idea that a computer name is a user name?

  Try the system.

  And I suggest you to read some documents.

• SMART short test failed

  Under hardware Maintence diagnosed and he tells me that the SMART short Test failed what it means and how to fix this

  I think that trying to DEFRAGMENT a hard disk 'default' is the wrong thing to do.

  Compare to the conduct of a dirt road with Bald tires - while the Bald tires may be OK on a dry, paved, road between them work "hard" will result in a failure of the tire.

  Similarly, many files on the hard drive when it is expected to be soon to fail, is also a bad idea.

  Any small computer boss store can sell you a hard drive brand new and may try to "clone" of 100% of the hard drive of the 'old' drive on 'new' disk

  Price?  It depends on the capacity (250 GB? 500 GB? 1000GO? 2000 GB?).

  About US $100, you will have a new disk drive with a capacity greater than your current drive.

  Add $50 to $100 US for the technician:

  Open the computer case,

  * Check the physical size and the capacity of the old-disk drive, to recommend a "compatible" replacement

  * Fix temporarily the new discs,

  * run the software "-disk cloning."

  * delete the old records (and he will give it to you, so that you can literally hammer it, so that no one will ever be able to read one of your folders – think 'security'),

  * connect permanently the new disks.

  * close the computer case,

  * test it.

  It also depends on the "age" of your computer.

  If it is still running Windows XP or Windows Vista, it will be over ten years - REPLACE a computer of this type.

  rather than spend more than US $150 to keep until something else died of "old age".

• Satellite Pro A10 comes with: error IDE #0, PXE-E61media test failed

  I recently bought a used Toshiba Satellite pro A10.
  When I received it, it was working and being a noob I tried to install a network card and create a wireless network with my desktop using XP when it did not work I plugged my ethernet (from my desktop) cable on the laptop and flashed upwards with a small number can not? dll etc etc.

  Now I unplugged the ethernet cable and when I try to boot my laptop it comes up with:

  "ERROR IDE #0".
  Intel (r) bootagent, FE v4.1.09
  Copyright 1997-2002 Intel Corp.
  PXE - E61: Media test failed, check that the cables
  PXE - M0F: Exit Intel Boot Agent
  Insert system disk in drive
  Press any key ".

  HI Tom,

  The error message that you receive indicate that your laptop is trying to start the connection to the LAN rather than from his own hard drive or a CD-ROM. I suggest that you verify that the boot sequence is specified correctly in your BIOS, or alternatively, you can press F12 during your market and you should get the boot device menu sequence appears so that you can specify that you want to boot from your hard drive.

  Kind regards