Installation on an illegal copy

Similar Questions

• An illegal copy of Windows XP can be upgraded to Windows 7?

  First of all, some context to information.

  About six months ago, I bought a Samsung netbook for the brother of my friend who lives in Thailand. The machine came with a genuine copy of Windows 7 Home Premium. In fact, I paid extra for having him on level compared to the Starter edition to Home Premium.

  Unfortunately, it is a perfect beginner and despite my insistence that he executed regularly AV scan, the computer has been infected with malicious software and became unusable.

  Since he had not made a backup he could restore the OS from, he took the machine to a local repair shop. Instead of tackling the problem, store deleted the installation of Win 7 (without contact with the user) and replaced by what I suspect to be an illegal copy of Windows XP Edition family. I say this because it does not display the Windows logo on startup, but rather a nice picture showing a number of ads.

  As the original operating system can no longer be recovered even if the machine is still under warranty, I am looking to upgrade to Windows 7 Starter. I'm not going to waste money on Home Premium this time well that as a lesson to the user to take over maintenance of the machine in the future.

  However, given that the current installation is probably an illegal copy of Windows XP, my question is, he will still qualify an upgrade?

  Samsung will quite happily sell you a set of reocvery for the original operating system disks - and you should have the means of the provider to be able to upgrade the system again (it's an Express upgrade, probably) - you can call if you are unsure. There should be the key in the paperwork that accompanies the machine (if it includes also a bunch of disk)

  You can borrow an external DVD drive? (or buy one - they should be available for less than $30-40).

  Samsung may have recovery located on a Flash drive - ask them.

• How can I get rid of an illegal copy of windows 7

  My laptop had windows vista.  I installed windows 7, but this has proved to be an illegal copy.  How can I get rid of it and get back to vista.

  Back up your data on Windows 7 (a full backup, not a backup of the image).  Do a clean installation of Windows Vista, including a full format of the drive which is provided as an option during the installation and which will get rid of Windows 7 and all the rest (however do you - with an Installation of Vista genuine, an OEM Installation disc, disc a recovery disk provided by the manufacturer or a recovery Partition if you have one).  Then, you must reinstall all of your software, to reconfigure all the settings of your, to restore the backup to reinstall all updates and service packs...  In essence, start over again as if it was a whole new machine.  If you have any of the disks or the recovery partition (or do not know how to use), contact the manufacturer for instructions and/or a set of recovery (at a modest price) disks and then use them to do the installation. Do a clean install follow these steps:http://www.winsupersite.com/showcase/winvista_install_03.asp (taking into account the necessary adaptations by the procedures of the manufacturer of your computer).  These instructions will work as written if done with an installation disc full Vista genuine.

  I hope this helps.  If the situation is more complex you have validated, after return and explain things in more detail and I'll try to help.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I uninstall an illegal copy of Windows 7 and go back to XP or Vista?

  I asked this question before the past months, but it was never answered or solved by you.

  My son has an illegal copy of W7 in his laptop, it was installed by the dealer, that he bought, which will not exchange it, quite normal in this country corrupt where we live, we can nothing what do about it.  I have explained everything as you when I asked for help on this month.

  He just started to use your MAC at home, but now he needs this laptop for work and he wants to start using it again.  He wants to get rid of W7 and go back to Vista or XP W which was initially about this? We do not know the one that was originally there.    How can it do and can you still download XP, did support, Council of State, which was my favorite?

  Thank you

  In case this link (following Bob Headrick) does not...

  "report to the provider Microsoft such as described here"
  or... https://www.Microsoft.com/en-us/howtotell/CFR/report.aspx

• Reinstalling windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd.

  Setup cannot copy files?

  I did a reinstall of windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd. Please make sure the disk is in the e: drive and try again. I can locate the file and find no problem sound on the disc. Here is a list of the files that gave this same error.

  migregdb.ex_
  icwconn1.ex_
  ICWCONN2.ex_
  INETWIZ.ex_
  icwhelp.dl_
  icwutil.dl_
  icwrmind.ex_
  ICWDL.dl_
  icwx25a. COURIER
  icwx25b. COURIER
  icwx25c. COURIER
  ICWIP. COURIER
  Phone.ic_
  Phone.ve_
  State.ic_
  MSICW.is_
  MSN.is_
  support.ic_
  Msobshel.ht_
  ISIGNUP.ex_
  icwtutor.ex_
  icwres.dl_
  trialoc.dl_
  Oobeinfo.in_
  Oemlogo.gi_
  Mouse.ht_
  ISP.ht_
  Oempriv.ht_

  I know that the volume control does not work, and that the windows sounds are not listed, if you try to change the sounds on the system. As the noise of opening and closing session. The drive installed on a different hard disk on the same computer without error, it should not be dirty or damaged. If anyone can help with this please?

  JOEY

  To the file copy stage of the registry would be game.  It could be a permissions issue, you could mount the drive in a different Windows NT installation type and set the permissions.

  John

• I bought a computer used hp that someone installed an illegal copy of windows 7 and I can't restore to windows vista

  I bought a used computer hp someone installed an illegal copy of windows 7 on and I can't restore to windows vista

  You can order HP recovery disks:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=bph07143

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&DLC=en&docName=c02682650#x0027;destPage=document&CC=UK&DLC=en

• I have Windows 7 on an old laptop that is not connected to the internet. PC says that it is an illegal copy. Not the case! I can give you the serial number. What can I do?

  Windows 7

  The original disc was purchased by me and recorded in Eunice b. Kirkman Microsoft would have a record of it?

  My laptop has been on the shelf for several years unused until I turned on it yesterday.  He tells me that I have an illegal copy of Windows.  I know that's not true.  I want to take it with me when I visit my son in the month of April, but I'm afraid to use it.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I don't have the installation disc for my copy of the student teacher CS5 extended and I do not know which files I have to download for installation?

  I don't have the installation disc for my copy of the student teacher CS5 extended and I do not know which files I have to download for installation?

  The difference between the student-to-teacher and regular versions lies in the license.  The software is the same.

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

• Why whs 2011 installation gets stuck to copy Windows files on the HARD drive?

  I try to install WHS 2011 OEM on a HP EX470 software.  I have tried about 30 times without supervision and welfare facilities in the past 4 months and am very frustrated that I can't succeed and purchase the software was a waste of time and money.  I tried 4 hard drives, properly formatted capacity of 250 GB to 2 TB.  EX470 has the original 1620 AMD processor and 2 GB RAM upgraded and qualifies for the upgrade to a 64-bit system.

  Problem with installation assistance tries: Installation says "Copying Windows files", but after a variable time in hours of waiting, growth remains at 0% and finally says "error in installation.  Try to restart the installation.  Same thing happens with the help of the DVD, or by using a Sandisk Cruser formatted and made bootable 16 GB flash drive with a file cfg.ini the instructions online and also tried without the cfg.ini file.
  Problem with unattended installation attempts:  Process completely blind.  Does not install even if left for 24 hours.  Cannot decipher the flashing lights on the Flash drive and thereafter, no installation nor evidence of partial installation is visible on check the hard drive on another computer.  I suppose that the same thing as the installation attempts assisted.
  Looked for solutions online for 4 months, but nobody does the problem of Windows not to copy the files to the HARD disk during installation and what goes wrong.
  Help!

  Hello

  I suggest you post your question to the link and check.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Computer does not restart during the installation of XP after copying files

  I do a new install of Windows XP on an ASUS laptop A3G of 2005.

  After that he said that the CD has finished copying the files, I've been waiting so he could restart.  Restart the computer, but the screen shows only a blinking white line.  Nothing happened after that so I restarted the computer and the installation process went through again but I found myself stuck in the same exact spot.
  The CMOS battery is broken, so that could be the problem.  Put that side how can I remedy this?

  Without the CMOS battery, youre pc will not work correctly.

  The only function of the CMOS battery is to power the BIOS...

• Xp pro installation gets past the copied installation files and then restarts, rather than continue with install it starts from the beginning again.

  new installation of XP pro on a Dell Inspiron mini

  Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...

  any help much appreciated...

  Hi, Leon,

  Always include computer make and model, please.  Thank you.

  Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)

  If there is a timeout parameter, set it to Max.

  Then, find the boot device priority section

  A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.

  Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

  Install Windows XP from USB key

  • Insert the USB key into the USB port on the computer.

  • Open the "I386" folder and find the file "Winnt.exe".

  Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.

  Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.

  Let the installation program copy the Windows XP installation files on your computer.

  Restart your computer to a command prompt. The Windows XP Setup will continue automatically.

  Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.

  http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html

  Make a bootable memory card or USB key using PEBuilder

  http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/

• Could not find an installation package for the product TrayApp. Try installation using a valid copy of the installation package for TrayApp.msi.

  Yesterday I uninstall a program, the Zynga toolbar and which has not, I lost a google toolbar. I then tried to perform a restore, and that's when I started getting the TrayApp message. Also, I tried to do a restore on my external hard drive device, and that did not help either. The date on the external hard drive was 18/02/2011.

  The google toolbar is active it is not displayed any longer.

  Hello

  "a valid copy of the installation package for TrayApp.msi.

  This is normally a problem with your HP printing software

  Uninstall and reinstall the printer

  and try this

  http://www.ehow.com/how_5269744_remove-trayappmsi.html

  Contact HP support

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/

  follow these steps

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Repair of a Windows 7 OEM installation with a personal copy of Windows 7

  Hello. I have a Dell Inspiron n5050 notebook with Windows 7 Home Premium (64-bit). I ran a few tests anti-virus that has removed thousands of files, and now the laptop will not boot. The operating system goes to screen repair instead of a splash screen options. I ran all available service options, but neither solves the problem. Can I repair the installation clean copy of Windows 7 Pro (64 bit)?

  If you try to use the Professional Windows 7 disc to make an upgrade of the repair, it will install Windows 7 professional.

  Try to create an all in one disk or borrow a disc of Windows 7 Home Premium 64 bit can do an upgrade of the repair.

  Windows 7 AIO DVD - all the editions of Windows 7 on a DVD

  Or use the recovery partition to reinstall Windows 7 Home Premium. Don't forget, this will restore your computer to its original state. If you back up your files and prepare reinstall the programs.

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.

  See also:

  How to: What are my options for Windows 7 reinstall media?

• BIAPPS 11.1.8.1 installation hangs at 0% "Copying files stage 5 of 6 ' under Linux

  Hello

  We are trying to install BIAPPS 11.1.1.8.1 on a Linux system, based on the steps on the installation document link

  https://docs.Oracle.com/CD/E38317_01/doc.11117/e35981/install.htm

  , we proceeded to the stage where you want to install the

  3.3.3 Installing Applications of BI to Oracle using the Business Analytics application Suite Installer.

  Problem: While run us the following command under linux

  . / runInstaller - jreLoc < jdk or jrockit location >

  We are able to move to the stage where provide us the path of the middleware for installation, however once that the ' Copying files stage 5 of 6 "starts and the percentage of installation = 0%. The installation does not any more (screenshot attached). We carried out the following checks

  1. check the necessary Variables

  2 DB, Weblogic, the servers are all running

  3. check if there is any folder created as part of this installation = NO

  Please advice as to what could be the problem

  The log file excerpt:

  *****************************************************************************************

  IAppsInstallAction

  [2014-11 - 10T 23: 17:45.543 + 05:30] [as] [WARNING] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] error in renaming/u01/Oracle1/Middleware/Oracle_BI2/inventory/Scripts/ext/jlib in/u01/Oracle1/Middleware/Oracle_BI2/inventory/Scripts/ext/jlib_platform

  [2014-11 - 10T 23: 17:45.543 + 05:30] [as] [WARNING] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] error in renaming/u01/Oracle1/Middleware/Oracle_BI2/inventory/Scripts/prereq in/u01/Oracle1/Middleware/Oracle_BI2/inventory/Scripts/prereq_platform

  [2014-11 - 10T 23: 17:45.596 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] Version of oracle.bi.biapps in the home of oracle: / u01/Oracle1/Middleware/Oracle_BI2 is: null

  [2014-11 - 10T 23: 17:45.609 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] Version of oracle.bi.biappsshiphome in the home of oracle: / u01/Oracle1/Middleware/Oracle_BI2 is: null

  [2014-11 - 10T 23: 17:45.616 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] Version of oracle.bi.biappsinst in the home of oracle: / u01/Oracle1/Middleware/Oracle_BI2 is: null

  [2014-11 - 10T 23: 17:45.672 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] Version of oracle.bi.biappsshiphome in the shiphome: / u01/software/biapps/biappsshiphome is: 11.1.1.8.1

  *****************************************************************************************

  Hello

  According to the document

  Oracle home directory

  Specify the Oracle Home for BI, for example, Oracle_BI1. Do not specify any other Oracle home or choose to create a new. Oracle home for the BI directory is where the binaries of software for Oracle BI Applications and operational planning Applications must be installed.

  could you please make sure that it is only on Oracle Home

• Customize installation ESXi with a copy of file post install?

  Is it possible to change the ESXi 4.1 installation to perform a post install file copy?  I wish I had some ISO files copied from the installation for datastore1 (local storage) once the installation DVD.

  http://www.dailyhypervisor.com/?file_id=20