Flex in a week: run the mxml, but nothing shows

Similar Questions

• Why do I receive flag showing that I have a problem and insert the disc. but nothing shows

  Why do I get a red flaag showing I have a problem and to insert the blank disc aa, what I do, but the flag persists?

  Hello

  • What disk you insert?
  • What are the instructions?
  • How long have you been faced with the question?
  • Are there changes to the computer?
  • The problem is present in Safe Mode and clean the boot?
   
  I suggest you run the Analysis System File Checker and see if TI the problem still occurs. To do this, please see the following article.
  http://support.Microsoft.com/kb/929833

• My bluetooth and wlan refused lights. I've linked enabling the setting but nothing shows up there. What can I do to fix this...

  I tried to activate the console bluetooth, WiFi or just off bluetooth completely. I tried to use the command Setup but nothing happens. Wireless bluetooth and wlan settings are simply empty.

  Is there a hardware button or a FN key on your keyboard? It might look like a satellite dish or even signal bar, please understand this part. But if there is a button, press it and check if all of the parameters of return on.

  Concerning

• 5210 kodak printer, when I print the document runs through the printer, but nothing prints, suggestions. worked fine until today after a move

  everything looks ok, but when I print the paper passes through the printer but nothing prints, suggestions. worked fine until today after a move

  Check with Kodak support or website to see if there's a test or a diagnostic process that you can run to identify the problem with the printer.  It is not likely to be a problem of Windows at this point.

• My laptop recognizes the drive but does show that two files named "My Data Sources" and "Bootsect.

  original title: old Hard Drive Access

  I have recently had problems with my pc, I decided that I will buy a new Tower, but I really need to get some files off the old hard drive, I bought and pregnant for the SATA drive out of my old pc. I'm now trying to get the files on my old drive through my laptop. The laptop is running Vista. My laptop recognizes the drive but does show that two files named "My Data Sources" and "Bootsect. When looking at the properties it shows that the majority of the disc is full, only 30 gigs for free the 160 GB drive. I don't understand why I can't access to find one of my old files. Help, please!

  Hello

  ·          These files are encrypted?

  Step 1: Step 1: temporarily disable the security software and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-vist/disable-antivirus-software

  Note: Make sure to allow him to return so that your computer is protected.

  Step 2: Run a check disk.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• My macbook bettery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happened.

  My new book mac early 2015, battery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happens.

  You can try another charger?

  Also-

   - Press the Option button and click it - system info - Power - post what is shown on the battery please

• Run each VI but then show after a different action by the user

  Hello everyone,

  Sorry for my English in advance, you will see some errors probably: 3 I hope you understand anyway!

  Well, I am a beginner with labview and I work in a project on a system that may take measures of speed and strength.

  I have already created several VI:

  -One for speed

  -One for the force

  -One to make a report

  - and another at the choice of the type of the event.

  To summarize, the system having to control 2 types of measures: 24 mph and 28 mph and we must conform to this 2 different tests, obviously.

  The goal is:

  (1) see the first VI: type of measure and leave the choice to the user about 24 or 28 miles an hour and then Labview tell if it complies or not after the measurement.

  (2) display the VI that show measures speed for users;

  (3) display the VI that show measures of force;

  (4) and finally the last VI to carry out the report: I have integrated checkbox, etc..

  I would like to help users switch in this VI through the buttons "previous" or "next".

  I already write a 'hand '. If I run the main I had a first push button to go in a VI, and then I had a few 'next' buttons to display the next VI.

  But now I have different problem and even if I try to tackle him I really don't understand how...

  I will develop my problems:

  -The main problem is execution of these screws: the test is in the 0, 6s. So I would run each VI during the test, record data and only then to show different for users through these VI data as I explained before. For the moment, as I understand it, my work just run different Vi when I click on the 'Next' button and finally I don't want to do that.

  -Another problem is that, in fact, the user can navigate between different VI, but they are not yet delete when the user clicks 'next' Finally it does nothing actually. In the example, I want the user to look at the speed of data, write them on another file, and then click Next, sign before removal and next show, write to another file, click Next, etc... and I do not understand how it is possible...

  -Finally, I think it's possible, but the best thing for me would be that different data stored in a file, with everything which is located on the front panel. If I had a graph, I would like the graph in a file, etc. And in the example for my last VI, the report, thanks to the box. If something is check, writing to a file, and if it didn't ignore it.

  Sorry for this very long text and my bad English. I hope you understand my problem... I really need help-_ - I am disappointed, this is an important project for me (learning) and I tried a lot last week, but I ask you cause now I have really idea more...

  Thank you in advance,

  I join my project to receive a little help and explanations for this problem

  Hello

  With your architecture, it is obvious that you can't go back.

  I would be more appropriate to have a main.vi with a State for example machine calling Subvi through sub - VI supanel controls front themain.vi.

  Here are a few documents:
  http://digital.NI.com/public.nsf/allkb/D587067E18E0E70186256D44007B91FE

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/loading_panel_in_subpanel/

  Adrien

• to plan for weekly defrag disk defragmentation but it shows as my last manual defragmentation was last run.

  I tried to plan the disk defrag to defragment every week, but it shows last run as my last manual defragmentation. I followed the instructions in this URL http://www.howtogeek.com/howto/windows-vista/configure-disk-defragmenter-schedule-in-windows-vista/, but still it does not work, showing my last manual defragmentation, I have windows 7, can you help me
  Please

  [Moved from comments]

  Hi Alicia,.

  We would like to know more detail from you to help you better.

  (1) have you tried to run the Disk Defragmenter using Task Scheduler?

  (2) was your computer when you had scheduled disk defragmentation?

  If you use a specific program on a regular basis, you can use the Task Scheduler Wizard to create a task that opens the program for you automatically on the schedule you choose. For the task, automatic disk defragmentation to happen of the computer or the Scheduler to work must be powered on.

  Write us with the details asked. We will be happy to help you come.

• Cannot run Windows Update. Keeps saying to re-record the files but nothing helped.

  Funny but I seem to just receive this error message when I run windowsupdate.com

  "Files required to use Windows Update are longer registered or installed on your computer. To continue:

  Click option 1: register or reinstall the files for me now (recommended)
  Click on option 2: Let me read on other measures that may be required to solve the problem. »

  By clicking on option 1 sets as it is something useful, then goes back to the screen Windows Update offering Express (recommended) or custom. Whichever you choose, it sends you back to:
  "Files required to use Windows Update are longer registered or installed on your computer. "To continue:

  By clicking on the option 2 doesn't send you a place that helps you solve the problem, it sends you to a screen where you can "SEARCH FOR YOURSELF" from scratch!

  I tried a few solutions as re-register DLL files, but not to prevail. It has not changed.

  I tried force windows update agent installation, but nothing works. It's really frustrating.

  I am running on a Windows 2003 Std Edition Server. "I would have preferred direct product. Any day. And twice on Sunday. "Director Steven Spielberg

  What are the files DLL have you tried re - record exactly?

  Have you tried to register MSXML3?
  "regsvr32 msxml3.

  You can also try to run the "sfc/scannow" command and let Windows try to repair system files.
  Best regards
  Claus Codam
  Consultant - Coretech c/o - Blog
  MCP - CCENT

• Is there a new 'fix' for a 9 year old XP Home computer that runs a lot slower than it used to? I do the interview, but nothing works

  In 9 years. I re XP 5 times because it was the ONLY done fixthat my Dell Dimension 8250 run fast. I kept all the updates, ran the cleaners of files, defragmented the hard drive, put the parameters to performance don't not Visual, even added more than 512 MB ram (1 GB total) that has MADE for a month or 2 really speed things up, but it is also to slow. The last time I put the XP disk in there was this msg: "Setup cannot continue because the version of windows on your computer is newer than the version on the CD. ANY HELP is HIGHLY appreciated as this is the measure of my ability of fix - it - happy to post here any info you need to diagnose this bottleneck problem, thanks, Patrick

  Do yourself a favor. After your next relocation and after you get it until you're happy with it (install SP3 and all subsequent security patches, install all the programs that you use regularly, install a good antivirus, install the latest versions of Adobe Flash and Java, etc.), make an image of your hard drive. This way you will EVER need to reinstall your OS again! Acronis and Paragon are good programs. DriveImageXML is a good gift (but doesn't have as many features as imaging programs paid).

  About the General slowness, here are the usual causes:

  1. malware (malware). You need to rule out first! This page has excellent information:

  http://Web.archive.org/Web/20080610163247/http :// www.elephantboycomputers.com/page2.html#Removing_Malware

  2. some programs aimed at combating malware (for example, Norton and McAfee). Ironically, they can slow things down because they use simply much too many resources. Sometimes they cause conflicts with other programs. And their default mode is to scan your entire hard drive whenever you start. Fortunately, there are other programs of anti-malware software available that use much less resources (p. ex., NOD32, Avast and Avira).

  3. too much of certain types of programs still running in background - with or without your consent. (Then again, a lot of programs running in the background of the consequences trivial.)

  To determine each program and process, you are running, use the task (Ctrl + Alt + Delete) Manager and click the processes tab. You should be able to sort by CPU usage or memory usage for a good ideas that are resource/memory hogs. You must write the names of all the processes for future detective work (or take a snapshot and print it).

  Use these sites to determine what these programs are, and learn how configure them to not always run when starting:

  http://www.PACS-portal.co.UK/startup_content.php#THE_PROGRAMS
  http://www.bleepingcomputer.com/startups/
  http://www.AnswersThatWork.com/Tasklist_pages/Tasklist.htm

  Sometimes, it is recommended to use msconfig to configure programs to run at startup. A better, more thorough program is Autoruns:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  But before that, you must use the settings preference of the program in question. Otherwise, for some programs, they will return to the list of startup anyway!

  If you do not want to use msconfig, it can be accessed in this way:

  Start | Run | Type "msconfig" (without the quotes). Enter (or OK)

  4. not enough RAM, causing the PC too rely on the pagefile. A quick way to determine if what is happening is to open (Ctrl + Alt + Delete) Task Manager, and then click the performance tab. Then the three values under Commit Charge (k) Note: in the lower left corner: Total, limit and peak.

  The Total number represents the amount of memory you are using right now. The vertex figure represents the maximum amount of memory you made since the last boot. If these figures are lower than the value of the amount of physical memory (K), then you probably have lots of RAM. In case you want to study it more, you can run the Page queue Monitor for Windows XP:

  http://www.dougknox.com/XP/utils/xp_pagefilemon.htm

  5. you can also verify that the access mode of your hard drive has not changed from DMA to PIO:

  http://www.technize.com/2007/08/02/is-your-hard-disk-CDDVD-drives-too-slow-while-copying/

  and

  http://winhlp.com/node/10

• Click on the creative cloud icon, but nothing appears. It runs in the background, but nothing appears.

  I'm trying to download the trial version of InDesign, and before I could do that I had to improve my creative cloud. Once updated, my computer freaked out, acted like it was stop, then has not.

  Now, I click on the creative cloud icon, but nothing appears. It runs, it will appear in the 'process' when I do the Task Manager, but in fact, nothing is displayed.

  I seriously got creative cloud, ha.

  Please refer to:

  The problems of download

  https://helpx.Adobe.com/creative-cloud/KB/troubleshoot-CC-installation-download.html

  Concerning

  Baudier

• I have re-installed Photoshop CS5 and have tried to run the update, but encounter an error message indicating that "there was an error downloading this update. Quit and try again later.

  The error occurs with updates for Bridge CS5, Extension Manager CS5, Photoshop CS5, and Photoshop Camera Raw updates. I tried to run the update multiple times and it appears to download updates and then fails with the message above. Internet connection is OK. Does anyone have any ideas as to why this could happen?

  The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• LightBeam shows as open and I see the little icon in the bar of the Addon, but nothing happens

  I am running Mac OS 24.0 FF 10.8.5. By clicking on the icon has no effect. The Tools menu displays 'close Lightbeam', but nothing happens.

  Never mind. This add-on - it's not worth. Thanks to anyone who has put in tine trying to help.

• computer is connected to the airport, but nothing else does

  My time capsule airport is plugged in and the light is green.  My iMac is connected to the network via wifi without problem, but nothing else will connect.  My iPhone and apple TV to see the network to connect to, but when I select keep just try and custom actually connect.

  We just moved and the internet was created just to our new home, but nothing has changed.

  What is the number and model of your modem?

  When you set up the new Internet service, you you connected your iMac directly the modem?  If you did, it's probably the problem.

  What operating system runs the iMac?  If you are not sure, click on the Apple icon in the upper left corner of the screen and click on in respect of this Mac, then poster is back with Version of OS X number that you see there.

• empty the trash, but windows show as full

  Sometimes, the icon of the Recycle Bin from my desktop is full but when I open it to see what files are inside just takes blank form. I mean that when there is no trash in the trash, it's show as complete. What should I do?
  I use windows vista ultimate sp1

  for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  Hi Pavilion,

  Thank you for using the Microsoft Windows Vista Forums.

  Click Start > all programs > Accessories, right-click guest, and then click run as administrator.

  2. type the following command and press ENTER:

  RD /s /q C:\$Recycle.bin

  (This removes the record of $Recycle.bin the C:\ partition.)

  3. type exit to close the command prompt window

  4 reboot your system.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.