Flipp waterproof shell with water?

Yesterday I came home from work and had to walk home in the rain. It was raining heavily. When I was home, I saw my flip shell was wet. I put my phone and saw that there was water inside the shell. The phone is waterproof when the shell is on the right? But how could there be water in my phone? So the waterproof flipshell in water? And Yes, the hull was everywhere well closed.

I would also like to add that, as long as the case has been completely broken down (https://www.youtube.com/watch?v=BEayyMMOZKE). Then, the phone will be water resistant. It is possible that even with the case properly aligned on that water can get behind the back cover. This should not affect the phone or resistance to water. However, I would still recommend that you remove the back cover and dry the phone is off.

-Tom

Tags: Motorola Phones

Similar Questions

  • waterproof to the water and supported? for TX30

    Condensation goes kayaking in Southeast Alaska this summer... rainforest, moisture, drizzle, questions.  TX30 is waterproof to the water to take pictures under water, so does it mean that it will not fog up when you take pictures in the above conditions?  What happened when the scope zoom 10 x is used?

    Will also be in a wilderness area for a few months, and wanted to load with Freeplay Energy Freecharger 12v crank charger that uses a standard plug IGC in... thought if there is a car for the TX30 adapter, may be able to charge properly.  Thoughts?  Otherwise, you will have to buy an extra battery.

    Thank you, community.


  • How to connect to the ESXi shell with domain id

    Hello

    We joined host ESXi 5.0 to active directory. We can open a session of VI client with our domain credentials.
    We want to access ESXi shell with the id of our field.

    Please suggest.

    Hi snjksh,

    Welcome to the fourms.  I think that what you are after is the following:

    User: [email protected]

    Pass: as usual

    Thank you

  • Waterproof ability to water?

    I just wanted to know the weather headphones must be closed or not? If this is not the case, why after I wash my Xperia Z3 using water from the tap it can not be turn on and the moisture begins to fill the camera? I wonder? After a day, now I can turn on my phone. But even there, the humidity. I had to close the earphone plug if I want to use it in water as washing it?

    Hi Zero3hero and all,

    If the device CERTIFICATION IP68, that means that you can dive the water is not more than 1.5 metres, is more than 30 minutes, in no way extra pressure (avoids the harsh jerking under water or strong direct flow to avoid a local strain), exactly what did your friend. Good advice is not to do it, but MANY people have bought this phone for these waterproof capacity water, and there is NO ACCEPTABLE voids of sony warranty so you do, because it's a violation of law of guarantee. They will hang on the fact that you could scuba diving with her, and you can not prove this policy of 'your word against mine, I am a business, you are an individual, you lose' after all, for me, is far from being a great company.

    Another thing, there was a lot of advertisements of sony with people jumping in the pool, not in a soft way precisely. Well well, in most serious countries, capacities shown in vinculates ads (i.e. binds) warranty. That's why sony after so many complaints has removed these ads everywhere.

    Concerning

  • Apple Watch waterproof to the water

    I must do something before I want to go swim with my series 2 Watch? Lock it?

    Hello

    Swimming workouts

    Begin a swim practice in the application of the workout on Apple Watch series 2 models automatically activates the lock of the water, which locks the screen to avoid accidental interactions during your workout.

    To complete your workout and to evacuate all the water:

    • Press the digital Crown and side button at the same time (which makes a break from the workout).
    • Turn the digital Crown, which opens the screen and erases all the water inside of the watch (it can make a sound).
    • Forehand and press end.

    Other swimming

    If you plan to get your Apple Watch series 2 wet in other circumstances that when training of swimming - as to the course of General wear in a pool - you can manually lock the screen first and then drain the water from the speaker subsequently:

    • Slide up from the bottom of the face of the watch to open Control Center > tap water from lock to lock the screen.
    • When you're done: turn the digital Crown to unlock the screen and drained the water from the speaker.
    • The lock can also be unexpected water activated and unlocked immediately after exposure to the water.

    After bathing, make sure to clean your Apple Watch series 2 by rinsing them with hot water from the tap. Watch and the band should be dried with a non abrasive and non fluffy cloth.

    Strips of leather and stainless steel (Milanese Loop and Bracelet links) are not water resistant, so should not be worn when swimming.

    More information:

    Work with your Apple Watch - Apple Support

    On the resistance to water Apple Watch - Apple Support

    https://help.Apple.com/watch/#/apd707b42a5e

  • Bluetooth & waterproof Airpod to water

    Hi all, I have two questions about the new airpod.

    First of all, be impervious to water as the iPhone7 and watch series 2?

    Second, will they use the standard bluetooth to connect to the iPhone. Today, I can't use bluetooth headphones when viewing a movie because there is almost a second a delay between the sound and the image (I have an iPhone6 for now). This will be the same with an AirPod?

    I hope someone has the answer to do this, thank you for your help.

    Hello

    Airpod are not watertight.

    Airpod connect to the iPhone via Bluetooth. When using them, avoid a second delay. If you encounter problems, contact Apple technical support or make a Genius Bar reservation at the time wanted to for assistance.

    More information:

    http://www.Apple.com/Airpods/

  • Why the firefox profile is messed up and does not restore the tabs when you replace the Windows shell with something like bbLean

    I use Windows 8.1 x 64 but I can replace the Explorer bblean shell and when I do that firefox has issues with the profile such that cancel last closed tab or not to restore the tabs at startup.
    I was able to use the replacement of shell of bblean for years in previous versions of Windows, but he always had a weird behavior with firefox. Of course, I am currently in contact with bbLean developers working on the problem, but I would also like to hear what may be the cause of this.
    Thank you in advance.

    @guigs2
    Thanks for responding but I solved it somehow.
    'Replace the shell' means that I have deliberately change value in HKCU NT\CurrentVersion\Winlogon\Shell so it does not point explorer.exe but blackbox.exe.
    After the reset of my installation of windows and get rid of all programs, including firefox now I use firefox portable (not installation of vanilla from the original site) and found, I have no problem with profiles so far.

  • Waterproof to the water/legal/warranty?

    my name is Virgil and I recently bought a sony xperia Z2, I have a question about the warranty.

    I read all the relevant documentation that came with my phone and the only information concerning the marking of the IP of the device is in the brochure 'important information' to the title of the limited warranty, condition number 3 where it says "this warranty covers any failure of the product due to:

    --use in environments as appropriate in the ratings, if any, are outdated... »

    My question is what this means that if the device is used within acceptable limits on relevant IP as the unit sides is covered by warranty in case of failure?

    Technically if we operate the phone within acceptable limits on the ip side, then they should replace right? As it is said so OUTDATED if we do not exceed the sides were covered? I would like to know, not that im going to start diving my newly bought Z2, but snack by saying that we are faced with the rain (we all know how much it rains here in Ireland), I work as a door-to-door salesman so the main reason why I bought this phone was to the coast IP58 as I am often caught in the rain

    OK, that's my opinion

    If the user isn't well close the lids and the phone is in contact with the water, it could get damaged by water and usually be covered (warranty), or if the phone has been used in contact with sea water it might not be covered is

  • Satellite M40-285 - CPU overheating after the accident with water

    Hello everyone,

    I have a Toshiba Satellite M40-285, and 2 days ago, my girlfriend dumped a cup of tea on the keyboard... The computer turns off after a few seconds. Immediately, I put the laptop upside down and disassembled parts. There was some liquid inside (especially inside the speakers under the keyboard and where is the DVD unit). Other parts (CPU, memory, wireless card, hard drive area) were completely dry. I have it with napkings and dry with a hair dryer (later I read that I shoud never use a hair dryer...).

    The turs laptop on one seems to work fine (only the first screen where it says toshiba remains more than normal long (15 seconds or more) before entering windows). But the problem I have is that the CPU gets overheated and the laptop shuts down after 5-15 minits of use. I'm getting attention via the RightMark utility I said "* Core overheating * ' and the temperature always between 45 - 55 c

    I replaced the thermalgrease but the problem remains. The CPU fan works (I think that the two speeds). The heatsink is very hot after the computer turns off (it burns my fingers if I touch)

    What could be the problem? * Is the processor damaged? Can be a problem in the motherboard? *
    I don't know what to don't know because is not woth the money to send it to the technical service, but I can't buy a new laptop now...

    Hey,.

    I m wondering that the laptop is still ongoing and no more parts are damaged. In addition he s very cool that you could fix it yourself and dry. Many people don t know how ;)

    In any case, if the CPU is overheating it seems that something on the assembly or the cooling fan is damaged and must be replaced. Possibly peut t fan run with the highest speed more, who knows.

    Of course, it is difficult to say what is the cause of the problem, but in your case I would try ordering a new fan and the heatsink too. The two parties shouldn't t be expensive and it seems that you can replace yourself.
    So just contact a service provider allowed in your country to order these parts. They can do this.

    Good luck and feedback would be great, I am interested on this! :)

  • connect Oracle using shell with the error log

    Hello

    I need to connect to oracle 10g db using unix shell files. Already I have username, password, hoststring and details is SCOTT/TIGER@TESTDB.
    I need to pass the values of this 3 (SCOTT/TIGER@TESTDB) at runtime only (i.e.) as PARAMETERS. Suppose that I'll give the wrong password or username, I need to capture this error in 1file and send the error details to our dba teams mail identification. Identification of email as [email protected] if its success, I have need to write the 'success' message in 1 file and no need to send a mail to the group.

    Can U please help to solve this problem.


    Thanks and greetings
    Sivaraman.

    kn_sivaraman wrote:

    Sorry! IM new to the forum. I know how to change this dn't topics.

    You must change the forums. No topics.

    This is not the right forum for you topic. Find the Linux forum and ask your question there please.

    Thank you.

  • MacBook Pro corroded with water.

    Before Christmas, I tripped and knocked down 1/2 H2O L on my MacBook open.  After the meeting on a fan for 3 days, I was able to take it to an Apple Store. They checked and everything was dry but corroded, give me a solution of level 4. They said that they can remove and replace for $1250. Since I bought it in 2013 should I go ahead and get it fixed?

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • My xperia z2 is always waterproof to the water after the back of the broken phone?

    Hello comrades xperia z2 users. As the title says; My xperia z2 is still tight, if I have cracks on the back of the phone? My phone is still intact.

    Hope to hear from you,

    Cliff

    I thought that you don't have that a small crack. In this case, I can't say.

  • Through the headphone jack water damage?

    I had my z2 as a replacement for my Z, which was fine and dandy except a week later the main Board is fried. (I sent away for the diagnosis and they wouldn't fix it). so now I have one damaged by water waterproof paper with water weight.

    I want to know if there is some way I can hold responsible for Sony? Why this is not covered by the warranty? I called sony but the rep I spoke to had me send my phone to the outside company...

    I looked at the small print on the tightness of the z2 and I respected everything, water came clearly thru on their faulty decision-making...

    I jut really need help. I am a mother of 3 and I home all the time with no fixed phone and currently do plenty with a stupid salary and talk iPhone... I don't know what to do, there's no way I can just be all that money and no way to fix it or have a business will not return their product...

    Hi, the best thing to do is to contact your local center of new Xperia... this time insist on an EMPTY TEST, as it is the only & best test to determine if your phone is indeed sealed with all the shutters closed...

    Hope this helps

  • Question Pro backpack

    Simple question, I hope:
    Is the Pro waterproof backpack with water or simply showerproof?

    Thank you.

    Hello

    I don't think it's 100% waterproof because it is made with fabric!

    As far as I know also Goretex material is not 100% waterproof!

    Good bye

  • Anyone know how to simulate moving water with your hands using Kinect? (As Milo)

    I would like someone to help me with this... I have to do an application contact with water and to simulate movements... like 'milo '... It's what I hace to do something similar there! Please, help me! and I apologize to you for my English, I'm not so good!

    Anyway, please, help me!
    Thank you!

    Hello

     
    I suggest you to contact Xbox support for assistance.
    Here is the link:

Maybe you are looking for