Why the firefox profile is messed up and does not restore the tabs when you replace the Windows shell with something like bbLean

Similar Questions

• Why my Intel wireless adapter is disconnected and does not restore until I restart the computer?

  Very randomly while I'm connected my computer won't go to any link and said I have no connection. I then try to solve the problem and it says to turn on my wireless adapter, but button is pressed and the light is on, so I turn it works without success. Then he tells me to check my router or a modem that always works so my ISP is not the problem. When this occurs, the computer does not have network connections, and has a red x beside the bars wireless not saying no connectivity, even give me the possibility to see the available wireless networks. The problem will persist until the computer is restarted, or the windows Explorer is restarted.

  Any ideas? Thank you.

  Pavilion dv6-3225dx
  Windows 7 Ultimate House
  Intel i3 M 350
  XY980UA #ABA

  Hello:

  The latest driver for your WIRELESS Intel network card is v 13.5.0 from 04/03/11.

  If this is the driver you have, then this is the most recent.

  If this isn't the case, you can give it a try, since you have nothing to lose. You shouldn't have to put up with unstable connections. I hope that the last version of driver if you are not running currently, solve your connection problems.

  I have included two versions of ILO since you listed only you had W7...

  W7 32-bit:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19855&ProdId=3199&lang=eng&OSVersion=Windows%207%2c%2032-bit * & DownloadType = software % 20Applications

  W7 64-bit:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19856&ProdId=3199&lang=eng&OSVersion=Windows%207%2c%2064-bit * & DownloadType = software % 20Applications

  Paul

• Network type changes 'Public' and does not return to work when the default gateway is detected

  Original title: Type of network not restored on ethernet cable reconnect.

  I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

  Hello

  You have any other network assets wireless (specifically) running on the computer?

  Have another active network connection could also cause this.

  Allows us to follow the methods mentioned below and see if they help.

  Method 1: Run the network troubleshooter.

  When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

  See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2: check if network discovery and file sharing options are enabled in the network and sharing Center.

  See the following steps:

  a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

  b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

  Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

  Collapse this includes this ima

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  
  Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network adapter, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Firefox remember my hotmail username and does not have a box to make it to work in Internet Explorer

  Very frustrating. FF started acting a few days previously. He started by showing my user id in hotmail. The next time I checked the mail, (I didn't shut down the computer) it was empty. I filled in and then my password. When I turned off the computer and tried the next day. He asked if I wanted to remember my name, sign in. I said, Yes. After that, FF never remember my user name and has never provided a box to do this. I had not changed anything in FF since download 5.o several weeks ago.
  It works fine in IE. I find no answer anywhere that offers a solution. I even uninstalled 5.o and reinstalled. It still does not work.

  On all browsers-hotmail problem - they changed their security - go here-> http://windowslivehelp.com/thread.aspx?threadid=514780f4-dbdc-4633-adc7-d0e368e8cff6

• Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

  Original title:

  My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

  I get a windows notification that says-

  "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

  I have Vista 32 bit OS on my laptop.

  My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

  I tried to look for a download of update on the site of Logitech & only found:

  6.32.20 set - point it did nothing to help.

  I also tried to move the receiver to the other 2 ports USB w / still the same results.

  Are there other downloads or solutions that will help w / this problem?

  You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

  Also try the steps below to reset the power of USB:
  (a) the laptop off, unplugged from the wall outlet.
  (b) remove the battery for a few minutes, then reinstall it.
  (c) then restart the laptop.

• Help, please! Why this code work in 6i form and does not work in forms 11g

  I tried to fix this thing for weeks and for some reason that I can't understand how to operate.

  Here are the error codes I get:

  FRM-41219: can not find the report: invalid ID (this pop on the screen I then click on the ok button the next show at the bottom of the screen)

  FRM-40738: Argument 1 of builtin RUN_REPORT_OBJECT cannot be null

  Basically, this code is supposed to call a report that puts another screen pop up and display the report.

  Here is the code behind the button on the form "File Print".

  :OVERALL. THE_NUMBER: =: REQUEST_SEQUENCE;

  IF : REQUEST_AMOUNT<100000 THEN : TEXT_ITEM83: =: request_amount;

  ELSIF : REQUEST_AMOUNT> THEN 1000000 : TEXT_ITEM83: =1;   / * I think the ELSIF should be replaced with ELSE IF don't know * /.

  END IF;

  : TEXT_ITEM74: =:GLOBAL. THE_NUMBER;

  THE_REP;

  Here is the code that is behind the box of quere.

  Start

  : global .qry_rep_val: =: quy_rep;

  : display_item78: =: global .qry_rep_val;

  If: global .qry_rep_val = '3' then null;

  elsif: global .qry_rep_val = 1 then

  run_vba_rep1;

  elsif: global .qry_rep_val = 2 then

  run_report_for_last_query;

  elsif: global.qry_rep_val = 4 then / * Yes, there is an extra space between the two, the 'val' and '='. Should I delete TI * /.

  Call the form ('/ export/home/oracle/Middleware/Oracle_FRHome1/forms/vba_tda_qry ', HIDE, NO_REPLACE, QUERY_ONLY);

  end if;

  : qry_rep: = 3;

  end;

  I guess that the problem is in the run_report_for_last_query procedure. There will be something like run_report_object. Could you post this code?

• Firefox does not recognize groups tab when it starts after a crash.

  I am running 29.0.1 on Win 7/64 - laptop HP dv9843cl with 4 GB of RAM (the max that puppy will support). I use TabGroupsMgr (which I love) with about 100 pills spread over 5 or 6 groups and periodically FF delivers a message that it is running out of memory (entirely reasonable). After the third time I get the message, I stop FF and after a minute or two, I start it upward, choose to restore the previous session. It comes up with a tab in a tabgroup and an another tabgroup with all the rest inside tabs. She does every time at startup. If I can do SessionManager/tools/BackupSessions and select the previous browsing Session, it restores the program perfectly with all the groups tab and the tabs to its seats in the right-wing groups. Weird, Yes?

  Looooove Firefox...

  Without Tab Mix Plus, all TabGroups loading properly with the restoration of the previous Session. Thus, Tab Mix Plus is the culprit. Thank you for pushing me to the root of the problem...

  I have since warned the author of Tab Mix Plus, asking him to check it out...

  Thank you again...

• The Task Manager does not appear, nothing happens when you select it

  It is very difficult to get help. Now, I'm not sure if this is the right forum and place to be. I need help to get the Task Manager which has disappeared from my computer. I click right on the taskbar, and then click on task manager and nothing appeared. Please advise on how to find him.

  Hi disillusionedvery,

  If you're not, try to login as an administrator and see if that makes a difference.  If so, we still have a problem, but at least we know the Task Manager is here.  If you have any other user accounts on the computer, try connecting them and see if they all have the same problem or if it is limited to one account.  Your profile may be damaged and if this is the case, post back and I will provide procedures about how to fix it.

  Try pressing CTRL-ALT-DEL all at the same time and click Task Manager on the screen that appear and see if it works to access the Task Manager.

  If this does not work, let's try the following:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If it does not, then thanks for posting error messages in the event viewer on the Task Manager (Start / Control Panel / administrative tools / Event Viewer).  Look in the system section.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  Do you know when this problem started?  If it has been reasonably recent, try a restore of the system to a point in time BEFORE the problem started. If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If this does not work, you may be infected with malware.  Update and run a scan complete with any security software you use.  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx.  If you find something, especially something you can't delete, then after return.

  That's enough for now.  One of these procedures will be hopefully resolved or at least identify the problem.  If this isn't the case, please post back with the answers to the above questions, results of the tests and procedures that you did (including copies of errors if any found), your version of Windows (for example, 32-bit Vista Business SP2) and anything else that you think may be useful.  We will then decide where to go was from there, armed with more information and know what and did not work.

  I hope this helps.

  Good luck!

• Apple Watch does not a Ding noise when you plug in the charger

  Recently my watch Sport Apple stopped making noise "ding" when I connect the charger it. This is happened after I changed the bands and noticed two green lights on the back of the watch as I turn off the watch. I checked the volume on both the watch and the app on my iPhone 6 Plus and they are correct. Has anyone experience this problem?

  Hello

  Try to restart or if it does not help, force the reboot - your watch:

  -Restart: Press and hold the side button until you see the cursor off the power; slide it to turn off; Hold down the side button until you see the logo.

  -Force the reboot: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

• Firefox is constantly stopping, aging, and does not when on the home page yahoo uk, Manager of the tasks is that means to stop it, no event will block

  Latest version of Firefox, keep up to date. 8.1 Windows running on del optiplex 620, 2 GB of ram, 80 GB disk partitioned with Win10 on the other. Panda free av and malwarebytes free running. Never had any problem with Win 8.1 up to now, I have returned to it because of many problems with Win 10. Did you check Event Viewer, nothing, checked for crash report, nothing. No malware not reported. Whenever the only solution is to stop Fox with the Manager of the tasks and then restart when Fox goes back to where she was.

  https://UK.Yahoo.com/ I noticed no problem in the last two sessions, perhaps the problem is resolved, will not display rear reccurrence as appropriate.

• Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi. The time capsule disconnects from the network periodically and does not restore I have to restart to reconnect. What problem I have

  Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi and the backup. He constantly falls the internet connection and I have to restart the so he can reconnect. What problem I have?

  What brand and model of your Internet modem you have the Capsule Time (TC) by Ethernet? What exact model of the TC do you have? ... and who is your ISP?

• Audio default HDMI output goes to "not connected" when the receiver is turned off and does not reset as defdault when the receiver is turned on

  I have an NVIDIA HDMI output connected to audio receiver 7.1 Onkyo TX - NR. 818.  It is defined as the default output.  When connected, it works well.  When I turn off the receiver, the output goes to "not connected" and scene of my returns instantly becomes the default.  When the monitor is switched on again, the HDMI out remains "not connected" and audio is directed to the monitor.  If I unplug the pc HDMI cable and reconnect it, the HDMI from the receiver instantly responsive as default device.  How can I stop her from doing this change, whenever I have turn off the receiver?

  Hello

  Try this: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio-e-g-Windows-8/Nvidia-HDMI-Output-quot-Not-plugged-in-quot-Audio-not-going/m-p/1001191#M16981

  Good luck.

• Applications using cmd + tab switching does not work (reverse return) when you use several spaces in the Sierra

  I usually have a lot of apps open it in full screen across a number of different areas.  In El Capitan, when I used cmd + tab to switch apps, it would just go directly to the application in the entire app was opened in.  Now, he tries to switch to the app, but then IMMEDIATELY switches to the space, in that I was already.  It's like if someone is sitting there playing this cruel on me joke where whenever I try to go to the app, it shows to me and then immediately sent me immediately.  Everyone knows something similar to this?

  To re-create the problem, have a few apps open it in full screen in different spaces, then try to switch to another application in another space using cmd + tab or try to switch to an application that is just open on the main office space.  It comes immediately rebascule on your original app!  I'm ready to tear my hair out!

  Feedback: Apple http://www.apple.com/feedback/

  With your same Apple ID, you can register for a free developer account and start a conversation with Apple engineers

  Bug Reporter https://bugreport.apple.com/

• Smartband talk is disconnected and does not restore

  1 week old and it comes up with 'Samrtband is disconnected, you may be off' is 8 inches away, restarted my z3 xperia and always the same, both fully charged.

  It sets I removed the smarttalk app and reinstalled and chose the pair manually option. Not happy for a device/new application go awol however. Thanks for the help

• Error message: "the Task Scheduler service does not appear to start" when you back up files.

  Original title: error in Vista Task Scheduler

  Hello. I am running Vista Home Basic. I'm trying to back up my files, but get an error stating that "the Task Scheduler service seems not be started. Please start the Task Scheduler service and try again. "I don't know what that means and I couldn't save my files before. Do you know how I can fix this problem? Thank you

  Hi MK_806,

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Check if there is information in Event Viewer which may help us to solve the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  For more information, you can also consult the following article:

  Troubleshooting Task Scheduler

  Hope this information is useful.