Floating pool with a soft makes caching on the OS drive

Similar Questions

• Compensation copy in the Cache of the external drive made bootable disk full - where / how to remove?

  My boot drive became full on my Mac Pro (end of 2013 Quad Core, I installed 64 GB 1866 MGz DD3 RAM), OX El Capitan with 250 GB HD running - it was completely full and buzzing constantly warnings etc - then I found that I had used 192,85 GB on my user folder - I have deleted my desktop, downloads and deleted the Recycle Bin.  Properly, I did a few Google searches on how to move the users folders and files of applications on an external drive using the command sudo Ditto.

  I created a new user account and tried to copy the files using Terminal Server (my files are time machine saved).  I get error messages in the Terminal it produces in series through files, noting that start-up disk is full and no space for copy cache (or something to that effect). So I've put an end to the terminal window.

  I deleted an another 10 GB by removing some applications on my HD that I can re - download.

  I tried the same process and got the same error messages as Terminal run the copy command and put an end to the window of the terminal again.  When I search the two accounts, clear Trash, running MacKeeper I can't find where the 10 GB of cache is stored, or how to remove them and I wonder how many GB of cache I.

  Tips on how to find / erase this interrupted copy hiding in order to free up space, and second, alternative ways to move or copy a large WAD of (192,85 GB) files on an external drive without having to complete the cache on the source drive?

  Many thanks in advance,

  Michael

  For advice on where your data is stored and how much storage, it must here > http://pondini.org/OSX/LionStorage.html

  MacKeeper will cause nothing but problems on your Mac > do not install MacKeeper: Apple Support communities

  Uninstall MacKeeper > http://applehelpwriter.com/2011/09/21/How-to-uninstall-mackeeper-malware/

  Create a new user account will have no effect on the overall storage.

  http://www.Macworld.com/article/1165698/Macs/seven-ways-to-free-up-drive-space.h tml

• Did a system restore complete with built-in recovery partition on the hard drive, the recovery went well, but the computer is still slow and freezing.

  Original title: computer always slow and freezing after clean install

  It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.

  Hello

  
  Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
  Step 2: You can also check if the problem persists in the clean boot state.
  
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• LR6 will work with my photos that are in the iCloud drive?

  LR6 will work with my photos that are in the iCloud drive?

  The simplest method is to keep your photos and the catalog on an external hard drive. With LR installed on both machines you can share everything between the two that will be always synchronized. And you won't have to worry about an internet connection to stay in harmony.

  Or take a look at the video of Mike on Dropbox. Dosen t He pictures in the cloud, but his Smart Catalog and previews folder sync to the cloud.

  http://www.tipsquirrel.com/Portable-Lightroom-Catalog/

• Floating pool with Persona mode

  Hi all

  I have a floating pool and you have configured the persona mode. Everything works well except for the credentials Windows Manager does not record its inputs. Whenever a user gets a new virtual machine assigned, credentials Windows is empty.

  No idea why this is happening and how this can be solved?

  Thank you

  Check out this KB.

  http://KB.VMware.com/kb/2052573

• Location of the camera raw cache on the same drive as LR?

  I know that cache camera raw should be the fastest disk for optimal performance.

  I was wondering if it should be on the same drive as the catalog, or isn't it important?

  I wonder whether or not you will be able to detect a difference. My Camera Raw cache is on the same drive with my Lightroom Catalog program. But I installed an SSD. Once Lightroom is loaded and running, I couldn't determine a difference in performance. The program loads faster, but as soon as it is running I could not see a real difference.

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• I'm with Windows movie maker and hurt the sound from a cd to a video of the transition.

  The system is requires me to select audio from the video or CD, if I choose one then I lose the sound on the other.  I tried clicking audio bars and then adjusting the audio in the clip, but even once, I lose the audio on the other.

  Hi AngeSo,

  It seems that you have a problem with the sound from a CD to a video in Windows Movie Maker in transition. In order to quickly provide a solution, please answer this question:

  Did you do changes on the computer before the show?

  I suggest you follow the steps in the article and check if it works.

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  You can also see the following articles for more information:

  Problems with importing files into Windows Movie Maker

  http://Windows.Microsoft.com/is-is/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker

   

  When you use Movie Maker in Windows Vista to try to publish a video file of a recorded screen capture, the publishing process never ends

  http://support.Microsoft.com/kb/923946

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Problem with Direct3D, can make objects in the software WAS.

  Hello

  I use software WAS whenever I try to return something, it displays an error and the program is closed.

  Error reads: -.

  Could not initialize Direct3D

  Error ID "value cannot be null.

  Parameter name: 'Array' Argument is nothing. »

  Hi Isabelle,.

  Thank you for your response.

  I would need more information to help you.

  What is the brand and model of the computer?

  I suggest you to uninstall and reinstall the latest graphics card drivers compatible for Windows 7 on the computer manufacturer site.

  If the problem persists I suggest to create a new user account with administrator privileges.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  For reference:

  https://msdn.Microsoft.com/en-us/library/Windows/desktop/hh309466 (v = vs. 85) .aspx

  Hope this information helps and let us know the State of the question, we will be happy to help you.

• Can I use my secondary drive with operating system installed only on the primary drive?

  I want to install simulator FSX on my secondary drive, I heard that it will pick up the pace. I install Win 7 on my secondary drive in order to make it work?

  Primary-Seagate Barracuda 1 TB Win7

  Secondary-WD VelociRaptor 10000 RPM

  Thank you

  Noobie

  I run my sim card on a Sharp 70 "Led 1920 X 1080 p, its so rude, but I like it. I recently got the GTX 590 to find FSX hate double GPUs.Another lesson learned the bad sense, lol. (soon gtx 680)  Also I saw FSX does not play well with the RAID. The sim card is dependent on almost all CPU but with mem cpu and mobo upgrades I should;(better!) See a significant difference. I see a drop in FPS on such a large screen, are there tips to improve?

  Thanks a lot for your answer.

  (24 gb 1866 mhz mem, Asus p6t7 Mobo, intel i7 975 happen soon.)

  Oh yes, I am running an i7 - 2600 K on an Asus P8Z68-V mainboard with memory 32 GB GSkill, Yes, I use a lot of memory, but my performance is excellent, no bottle no necks here. I read that my favors 1600 MHz cpu, with a card mother dual channel is to have triple or quadruple channel about the latency of memory and cache. I think you should run an i7 - 2600 k or even an i7 - 3770 k and at least a card mother with a Z68 or better (Z77) chipset, I also think that FSX could benefit from the technology of fast storage Intels. In addition, I think you should consider at least a 32nm, otherwise a 22nm CPU. Sandy Bridge or Ivy Bridge CPU are pretty hard to beat. I use my system for games, photo editing and a few VMs running via VMware 8.0 and I'm quite satisfied with the overall performace, with 32 GB of memory, I'm not even under a swap file. In any case, you need to re - consider your choice of material. I have always a way to upgrade with my CPU, hard drives and the GPU.

• How to make programs from the C: drive to another drive in Vista?

  I do not know how to move. I had never done this before.

  * original title - I need to move some programs from my c drive to another drive to make more space, I do not know how to do it please help? *

  Hello

  You cannot move installed programs from one drive to another

  you will need to uninstall them and then reinstall the disk you want to install on these

  During reinstallion of programs you would have the choice of which drive you want to install them on

  _________________________________________________________

  but you can move your files and folders to a different drive

  http://www.vista4beginners.com/move-user-files-folders-to-another-partition

  ________________________________________________________

  and read this topic to make more free space available on C:

  see if this program helps you to determine what is take up space

  http://www.Jam-software.com/treesize_personal/

  by default system restore will have up to 15% of the capacity of the hard disk

  you would like to reduce this amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  also use disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

  • Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

  • System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.

  also scan for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  and read these information from microsoft on windows optimization

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Problems with DVD + R DL disc in the optical drive T500

  Hi - This is a W7 T500 running (2242CTO) / 64 - I downloaded the last Roxio Creator Business Edition and was able to burn a 4.5 GB file to a DVD + R DL disc using its function as data disc, no problem.   After burning, I closed Roxio and inserted the DVD into the player trying to read the content and after training, spun, I saw him briefly the [good] record label (in Windows Explorer), then the reader has become powered off State (Device Manager reports the drive has been "prepared to remove safely').   He turns to eject the tray or by right-clicking and selecting "lit.  It don't turn on even if I physically the disc to eject and reinsert.

  Other formats, CD - R, CD - RW, DVD - R and DVD - RW seem to work well.

  I have to reboot the machine to get the disc back and everything by restarting in this State, W7 is suspended in the shutdown process and I have to force a shutdown with the power button (I had no stop blocking otherwise).

  BTW, the drive is a carpet * beep * a dvd - ram UJ862A, pb04 firmware revision.   I am actively info on this drive and this firmware, meanwhile if anyone has any ideas they would be more than welcome.   Thank you!

  (PS: I tried to put "Mat * beep * one ' in the field 'Tags' of this message and got an error on the word's * t' is not allowed in this community!)

  Suspect bad media - can read brand DVD + R DL but not generics I bought...  Case closed for now.

• Need help with changing PowerCLI script to get the interface driver NETWORK & firmware version?

  Hi all

  mattboren created the script below for a list of BIOS hardware version and firmware version:

  ## Script function: quickly get BIOS date, Smart Array FW version, and iLO FW version for HP hosts in a given location (folder, cluster, datacenter, etc.)
  ## Author: vNugglets.com -- Sep 2011
  
  ## folder in which hosts in which we are interested reside
  #$strHostsFolderName = "myFolder"
  #Get-View -ViewType HostSystem -Property Name, Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo -SearchRoot (Get-View -ViewType Folder -Property Name -Filter @{"Name" = "^$([RegEx]::escape($strHostsFolderName))$"}).MoRef | %{
  ## cluster in which hosts in which we are interested reside
  
  $strHostsClusterName = "Production"
  Get-View -ViewType HostSystem -Property Name, Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo -SearchRoot (Get-View -ViewType ClusterComputeResource -Property Name -Filter @{"Name" = "^$([RegEx]::escape($strHostsClusterName))$"}).MoRef | %{
      $arrNumericSensorInfo = @($_.Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo)
      # HostNumericSensorInfo for BIOS, iLO, array controller
      $nsiBIOS = $arrNumericSensorInfo | ? {$_.Name -like "*System BIOS*"}
      $nsiArrayCtrlr = $arrNumericSensorInfo | ? {$_.Name -like "HP Smart Array Controller*"}
      $nsiILO = $arrNumericSensorInfo | ? {$_.Name -like "Hewlett-Packard BMC Firmware*"}
      $nsiNXdev = $arrNumericSensorInfo | ? {$_.Name -like "nx_nic device*"}
      $nsiNXdrv = $arrNumericSensorInfo | ? {$_.Name -like "nx_nic driver*"}
  
    if ( $nsiNXdev.Count -gt 0 ) {
         $nsiNXdevice = $nsiNXdev[0].Name
    } else {
         $nsiNXdevice = "n/a"
    }
    if ( $nsiNXdrv.Count -gt 0 ) {
         $nsiNXdriver = $nsiNXdrv[0].Name
    } else {
         $nsiNXdriver = "n/a"
    }
  
      New-Object PSObject -Property @{
          VMHost = $_.Name
          "SystemBIOS" = $nsiBIOS.name
          "HPSmartArray" = $nsiArrayCtrlr.Name
          "iLOFirmware" = $nsiILO.Name
          "nx_nic device" = $nsiNXdevice
          "nx_nic driver" = $nsiNXdriver
      } ## end new-object
  } | Export-Csv C:\temp\Production-BLadeG7.csv  ## end Foreach-Object
  
  
  
  
  

  However, I would like to change the driver for the CARD and the version of the firmware but still appear.

  Any kind of help and suggestions would be greatly appreciated.

  Thank you.

  Try like this

  $strHostsClusterName = 'production '.

  Get-view ViewType - HostSystem-Property Name, Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo - SearchRoot (Get-View - Name ClusterComputeResource-property - ViewType filter @{'Name' = ' ^ $([RegEx]: escape ($strHostsClusterName)) $"" "}). MoRef | %{

  $arrNumericSensorInfo = @($_.) Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo)

  # HostNumericSensorInfo for controller table of BIOS, ILO,

  $nsiBIOS = $arrNumericSensorInfo |? {$_. {Name: like "* system BIOS *"}

  $nsiArrayCtrlr = $arrNumericSensorInfo |? {$_. {Name - like "HP Smart Array Controller *"}

  $nsiILO = $arrNumericSensorInfo |? {$_. {Name - like "Hewlett-Packard BMC Firmware *"}

  $esxName = $_. Name

  $esxcli = get-EsxCli - VMHost $_. Name

  $esxcli.network.nic.list () | %{

  $esxcli.network.nic.get ($_.) Name) | %{

  $props [ordered] = @ {}

  VMHost = $esxName

  "SystemBIOS" = $nsiBIOS.name

  "HPSmartArray" = $nsiArrayCtrlr.Name

  "iLOFirmware" = $nsiILO.Name

  "nx_nic device" = $_. Name

  'nx_nic pilot' = $_. DriverInfo.Driver

  "nx_nic driver version" = $_. DriverInfo.Version

  "nx_nic firmware version" = $_. DriverInfo.FirmwareVersion

  } # end new object

  New-object PSObject-property $props

  }

  }

  } | Export-Csv C:\temp\Production-BLadeG7.csv # end Foreach-Object

• When I burn a DVD using Windows DVD maker none of the captions appear

  I made a movie with Windows Live Movie Maker from photos that had captions added to a photo editing program.  It plays very well as a wmv on the computer, but when I burn it to a DVD with Windows DVD maker none of the captions appear.  This can be corrected.  I really want to remake the entire project by adding additional legends in WLMM.

  Original title: AvrilB37

  Hello

  You should report this issue in Windows Live Movie Maker Forums: http://answers.microsoft.com/en-us/windowslive/forum/moviemaker?tab=all&tm=1366473651679

  Thank you.

• You can change safe location from the default value of the c drive cache?

  You can change the default location for the cache off the C drive safely? I want to add an SSD to handle all my caches.

  Lubricant,

  It is generally recommended that you keep the camer gross hiding files in the same place where the catalog is.

  If you still want to change you can check the link below, but the implication of changing the location would be the LR to regenerate the cache for files and would require time.

  Please see the link below for the same thing.

  http://helpx.Adobe.com/Lightroom/KB/optimize-performance-Lightroom.html

  Florian