FM 9 change the data model as requires it

Similar Questions

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• To change the data type of control/led

  Is it possible to change the underlying data type of the indicator or a control?  I a VI that I want to use that accepts any type of data (essentially data varriant) and display it accordingly.  I have different controls selected to display data of different types in the sense of data vs decimal boolean data vs integer, but certain types of data will be of type uint32 vs int16 vs uint64 etc..  Is it possible to programmatically change the data type, so I need to have all the combinations of indicators?

  The short answer is no. The long answer is that LabVIEW has not 'generic' controls that allow you to display any type of data (apart from the variant of course). There are several ways to address this problem, but all require you as the programmer to manage explicitly each type of data you could possibly meet. Here are some possibilities (in no particular order), please let me know if you would like to help a particular implementation of these.

  1. Force incoming data to variant, use the info option to determine the data type of the original data in a case structure (open G can do this VERY easy), have an indicator on the front panel for each type of data you want and hide those unused
  2. Use a sub-group of experts on the front panel and sub - vi call of to view specific types (that lends itself very well to encapsulate your data in a class and you leave OOP allows to expand into different types of data)
  3. Use a tab with the variant (similar to option 1) control put each kind of data in its own tab, enable only the current
  4. Do a Control-X to accept a Variant option 1 under the hood
  5. Just as a string of format and use a string indicator

  That's all I can think of right now, once again, let me know if you need more information/help on the options.

• I had no success to determine how to change the date, time, attributes etc (although the name can be changed) files in Vista Home Basic that I was able to do in Windows 98 Second edition. __Is their a reasonable solution to this? __Thanks

  It is my first visit to this feature of Microsoft Internet.  It defines a model for constructive citizen of the world form a more perfect union.
  Thank you.

  A "more perfect union"? Really? I'm not terribly interested in forming a union with a person, perfect or not, but I'll gladly try to help you with your it questions. To do this, you will need to provide more information about your computer and your questions clearly and concisely in the body of the message, not in the subject line. These links will help you with your next post:

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Change the date and time of Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-the-clock

  Don't know what you mean by "attributes".

  You change a file name in Vista right click on the file and then left-click 'Rename' or by clicking the file to select it by pressing F2. MS - MVP - Elephant Boy computers - don't panic!

• [JDev12c, ADF] Changing the data in the database tables (not)

  Hallo,

  a form obtained from a datacontrol created from a VO based on a query can moidify data in the tables used?

  In general, change tables af:forms to press the button "validate"?

  Some explanation would be appreciated.

  Thank you

  F.

  A commit writes the changes made on the current transaction in the DB. To make changes to the current transaction, you need to change the underlying model. If you use adfbc, that means that you need to make changes to the entity objects. As 1000723 says, vo that does not rely on an EO cannot change the model layer because there's no EO.

  Timo

• The relationship "designed to" make visible in the Data Modeler?

  Hello

  I was wondering about the following topic:

  When I create (engineer), a table based on its entity, there is a relationship between the entity and the table.

  So to speak: a relationship "carried out by".

  This relationship can be demonstrated in Data Modeler?

  If so,.

  -can we use them to navigate a table to the entity and vice versa

  -can we maintain, in the case of design changes and changes to the execution table?

  I know that the relationship is available in the xml file that stores the table (Table > generatorID), but I am unable to see / use the relationship in the Data Modeler itself.

  Kind regards

  Art

  Hi Art,

  There is a section "Impact analysis" in the entity and table dialog boxes. Under the 'Mapping' node you will see mapped objects and can open the box from there.

  You cannot create or modify the mappings manually for now.

  Philippe

• Change the DATE FORMAT in a data store

  I created a few projects with the help of a Teradata technology using tables that allow to CREATE_TARG_TABLE the Yes option.
  
  Model / data store, there are DATE fields, but I can't change the DATE FORMAT, change the field.
  
  When the process starts and creates the table in the database, create using FORMAT of DATE "AA-MM-DD" and I would like to create as "YYYY-MM-DD".
  
  Y at - it a step that I am doing wrong, to be able to change the DATE FORMAT?
  
  From already thank,

  Hello

  --> Physical Architecture topology--> Teradata--> data types, create a new data type (or modify the existing DATE data type), then set it to the desired format of the syntax 'Create Table' and 'Format data type accessible writable.

  That is to say DATE FORMAT "YYYY-MM-DD".

  Then all your tables created will use this format. (I just tested it, it works).

  Let us know if you have any problems.

  See you soon

  BOS

  Published by: Bos July 12, 2011 15:50

• "Deploy the data model for LCD screens" period

  Hello

  My Jboss is time-consuming while deploying the data model for LCD screens and it's initially Flash Builder 4 to display the error "Read Timed" out. How can I increase this timeout value?

  Thank you

  Houda

  Hello

  Please follow the steps below and see if it helps:

  1. in your Flash Builder click on the item in window menu, click on Preferences

  2. in the Preferences window, select Adobe-> RDS configuration

  3. Select your configured server and change/set Timeout

  I hope this helps.

• Calculate the fastest path between 2 nodes with the data model for the Oracle network

  Hi all,
  
  I have Oracle 10 g 2.
  
  My problem is the following:
  
  I created a network named ITALIA_NET in the data model for the Oracle network.
  The table of links of this network is named: ITALIA_NET_LINK$.
  The table of the nodes of this network is named: ITALIA_NET_NODE$.
  
  The table ITALIA_NET_LINK$ contains a field named COST that contains links (in meters) lengths.
  
  I've already calculated the SHORTEST PATH between two nodes of the network, by using the method of shortestPath() (using the Java API) as shown on "Pro Oracle Spatial for Oracle Database 11 g" manual. Infact, this method makes reference to the COST field for $ ITALIA_NET_LINK to make this calculation.
  
  Now, I want to calculate the FASTER PATH between two nodes of the network. I have the links (in hours) travel time to make this calculation.
  
  My idea is to create a new field in ITALIA_NET_LINK$ named Cost2 containing the travel time from the links and then do the math by using the shorthestPath() method, referring to the Cost2 field to $ ITALIA_NET_LINK COST field instead.
  By default, I know that the shorthestPath() method returns the COST field for $ ITALIA_NET_LINK. Is possible to change this setting and do that this method refers to the Cost2 field?
  
  In the alternative, is another way for the calculation of the fastest way?
  I want to leave the creation of another network as last solution, because I will have other costs of field (Cost3, cos4t,...)
  
  Thank you much in advance.

  Your approach is good. You will have two networks and you can read them in memory and analyze of shortest path. The shortestPath method is static for the class of NetworkManager. You can use the same method for both networks, once they are read into memory.

  ...
  read the network with time as cost of link
  NetTime network = NetworkManager.readNetwork (dbConnection, 'ITALIA_NET_TIME');
  read the network length as cost of link
  Network netLength = NetworkManager.readNetwork (dbConnection, 'ITALIA_NET_LENGTH');

  calculate the quickest way
  PathTime path = NetworkManager.shortestPath (netTime, startNodeID, endNodeID);
  calculate the shortest path
  PathLength path = NetworkManager.shortestPath (netLength, startNodeID, endNodeID);
  ...

  In the future, if you upgrade to 11g, network data model provides a load on demand (LOD) API that loads only the scores of necessary network in memory during the analysis. This command removes the restriction of the memory of the 10g (in memory API you use) API. API of LOD can handle very large networks and offers more features analysis and modeling capabilities.

  The following link contains the tutorial of NDM LOD API ready for download. Just for your information.
  https://spatial.SampleCode.Oracle.com/servlets/ProjectProcess?PageID=0Zl7oV

  Kind regards
  Jack

• update the model in the data model generator

  I was wondering how to upgrade the data model in the model generator (MS Word), so that I must not close word every time I have change the query (e.g. adding additional fields) - if anyone knows?
  
  Thank you
  Trent

  Try to reload the data file.

• Need to use values from the first query in other queris to the data model

  Hello
  Here is my requirement-
  
  I use the data model to run multiple queries. The first query, I get 10 records. Now, I want to use these 10 records in the second query to get my final result. I am not able to use the sub query as the two motions are quite long and complex.
  
  Select distinct Bishop of emp
  
  Select empno, emp where Bishop in (: Bishop)
  
  I can't use: Bishop because it will give only the last value stored at Archbishop. Is it possible to be able to use all the values from the first query in the second query using the data model?

  Hello

  Are you sure that you have your "dataStructure" configured correctly? Try this simple example:

  Hope this helps

  Andy

• Why I can't change the dates of reminder in the calendar

  I was trying to extend a stay to add one day more to a reminder I had set up on my calendar, but couldn't stay.

  After changing the date it to show the dates of trip corrected for about 2 seconds and then return to the original date of travel.

  Any ideas as to why it is not working properly.

  Thank you

  Maybe this will help.

  Calendar may not enter the new event.

  Calendar may not enter the new event (2)

• Can I change the Date on the pictures App?

  So I imported a few pictures and the date are false. Can I change the dates of the Photos for Mac app?

  Use the Image in pictures menu: Image > setting Date and time

  If you select several photos at the same time, the date and time will be shifted as much for all the selected photos.  This is useful, if the date and time of the camera was malfunctioning and all photos should be adjusted by the increment of time even

• How to change the date in the media browser?

  I had to take additional steps to get this media in FCPX - because of these additional steps, the date, that the images were shot in fact was replaced by date (today) that I had to do an additional image transcoding. I want to change the files under "3 June 2016' to be ' 26 May 2016',"may 27, 2016", etc.»» How do I manually change the date in the media browser or move the files to their appropriate date?  Please see screenshot. Thanks in advance. See you soon.

  

  UUse edit > Adjust content created date and time

• Is this ok to change the date of a photograph to the 1800s?

  I think I need to change the dates on about 400 pictures.  Enter a return date in the 1800s would cause a problem with the computer?

  This part of my family history project, which I had completely organized events in iPhoto, Photo is now a bunch of totally random photos.  They were initially examined in groups as I found them over a period of years - so in Moments - a big mess.  I had them in events either by individual or their own cell family, and of course I could merge or add however that I had to.

  Don't know yet, but I think that my best option now is to modify the dates first, just to try and get some semblance of order to it, then try to work out a system with Albums.

  Thank you

  Lynne

  I used "Set Date & Time" to put back the date of the year 1000, with no ill effects.

  

  I did to split times - it is very convenient to separate them all just by moving a few photos in time by 1000 years. So to adjust the dates for 200 years should be no problem.

  To adjust the dates of sins, I use this script: see this tip to user: Script: batch change Date and time on a fixed Date

  https://discussions.Apple.com/docs/doc-8421

  This script allows you to set the date and time of the selected photos to a fixed date, incremented a constant interval, for example a minute. I use it, if I don't know the exact date and time, but I just don't want the time, so photos can be sorted by time.