FMS3.5.2 supports the entire URL redirection?
Hello
I have a question.thanks for helping me.
1. I entered a url in a video player: rtmp://10.0.0.1/vod/mp4:sample1_1500kbps.f4v
2. this video does not exist in 10.0.0.1 server. It is available in 10.0.0.2.
3. the server 10.0.0.1 connect, play and resource not found.
4 Server 10.0.0.1 knows that this video exists in 10.0.0.2, then redirect the url full to 10.0.0.2. as
RTMP://10.0.0.2/VOD/MP4:sample1_1500kbps. F4V
I am looking for the three plug-ins(access, authorization, file), but I can't find a way to solve it. If I want to ask, FMS 3.5.2 support this redirection?
Thanks again!
This article feels a bit misleading for me - as if you could go all the way to the FMSCore, check if the file is there and if not then redirect. This is not true. You can redirect based on the connection line, knowing that the file from this request will not be there - but it's a little more sophisticated. If you go this route, you will probably want to URI encode this information into your line of connect to make a choice, but then again you may not be able to make that choice in the edge even when adapter. You could also build this logic in the player/server in several ways, but anyway it's a bit of work if the content is not available on this particular machine.
Honestly I would recommend going the ways that make our majority of customers. Either by checking that when connecting they end up in the right place if the content is limited by the FMS. Either that or make sure that each FMS can get the range of content according to the needs and balance the load. Those are the usual approaches.
ASA
Tags: Adobe Media Server
Similar Questions
-
Firefox support only empty new tabs for all web pages, with the blank url bar.
After an automatic minor update (16.0.1-> 16.0.2), firefox is now completely unusable.
Whenever I try to load a page, it shows only a blank tab labeled 'new tab '.
The url bar of this page will be empty if I try to open a link or bookmakrk.
The url bar of this page will be exactly what I typed if I manually typed a url.
Right click on the white pages does nothing: no context menu.
"Troubleshooting information" page DID load correctly however; It is the only page I was able to display at all so far.Restart of firefox has not fixed the problem.
Restart of firefox in SafeMode with addons disabled has NOT set the question - so please don't waste time trying to tell me that it's addons.
Change the settings of the network proxy has not fixed the problem.
There is no connection problem: IE can load pages very well from the same computer.I love firefox mah... but now it's dead... Please help!
Update: resolved:
Firefox works correctly after you restart the entire computer.It is bad form to require restarting the computer for minor updates to browser... and even the poorest not to say so when you do.
(Some of us run the servers in the background that should not be broken).
-
Question
I can't open my email on Firefox, it works on explore. When you go to the page I get this e message "the requested URL /hunter/ajax_login/redirect.php is not found on this server."Reload Web pages, and ignore the cache.
- Hold SHIFT and click reload.
- Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
- Press 'Cmd + Shift + R' (MAC)
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
-
Before that I've upgraded to Firefox 6.0, the URL was displayed in black text.
After the upgrade, it is now showing only the main domain name ( mozilla.com, for example) in the text in black, so that any additional text (like, https://support.) is grayed out.
It is very difficult to read this gray text on my monitor. I would like to make sure the full address is displayed in black text, but I couldn't find any type of configuration setting under Options to change that.
Please let me know if I can change the display of the URLS back to black.
This is a new feature in Firefox to highlight the domain in the URL bar. You can change a preference to do the full URL darkness.
Change a preference:
- type of topic: config in the location/URL bar and press ENTER.
- If you see a warning, accept (promise to be careful)
- Filter: browser.urlbar.formatting.enabled
- in the lower panel, double click on this item to toggle the value false
I don't know if yes or no you must restart Firefox after doing the above to have the change take effect. Test, and if it does not, then restart Firefox and test again.
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You must update some plug-ins:
- Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
-
The requested URL was rejected. Please see your administrator.
Your support is ID: 12371425760646637041
Impossible to allow:
missing service xapi node
Please visit http://www.sony.con/mydash for help with this problem. -
APEX 5 - bug Builder link when the action is redirect URL
Hello
I noticed a strange behavior of the designer of the Page - link generator when the action is redirect URL.
When I try to make a link to the request URL to report who is in form f? p = & APP_ID.:0 : & SESSION. : PRINT_REPORT = REPORT_NAME value is stored without problem.
After that when I click on the target to change the URL there is no display.
If you want to see URL previously entered, the solution is to switch from Page Designer component mode.
Is this a feature or a bug?
Hello
Thanks for reporting this.
I think that this reproduced only for the buttons, can you confirm that you were testing a link to a button?
And it is indeed a bug, where the button of "redirect url" action starting by ' f? p' load a value zero in the dialog link (filed bug #21517098 to follow it). Although it is a bug, it must be said that in the case you cite, I believe that this should rather be defined as an action to the button "Redirect to the page of this application", where you define just page = 0 and demand (in advance) as 'PRINT_REPORT = REPORT_NAME'. Which works very well in 5.0 and is easier to set than the raw URL.
Kind regards
Anthony.
-
How to redirect the output to the entire window in OA 3 Frame jsp?
Hello
I'm working on a 3 OA framework page. In the centre, there is the Cancel button. Clicking on it should return the user to the page source (rather than navigating to the image page) and the response should take over the entire window. . By default, the answer comes to the chassis of the Center. I used the piece of code to set the picture property target of the Cancel button in processRequest of the framework of the Center:
CancelButton OAButtonBean = (OAButtonBean) webBean.findChildRecursive ("Cancel");
cancelButton.setTargetFrame ("_top");
But the answer still comes to the frame of the Center only. How the answer can be addressed to take in charge the browser window all?. Help, please.
Kind regards
AvinashHello
In this case, set the target frame to null and writing property destination url:
OA.jsp?page=/...complete path of the page as (/ oracle/apps/pa/assignment/webui/AssmtPG)
Thank you
Gerard -
Send the page and redirect url
Can someone tell me how I can do the following when the user presses a button. I can do 1 and 2 separate button but don't know how to link to a single button.
When you press a button (example: submit button)
1. send the page, do a few select and insert
2. a url redirection
Thank you very much.
ZenChange the branch that fires after 'Send' to go to a URL instead of a page as you probably now have it.
-
Redirect to the new URL in the same window?
Hi all - I have a SWF embedded in an HTML file. After the film has finished playing, I want a new URL to load. I currently have the following code in the final keyframe of my layer actions:
navigateToURL (new URLRequest (http://www.someurl.com));
.. which works, but the problem is that it opens a new window for the new URL instead of redirect in the same window, which is what I prefer. Y at - it a different command that I can use to force the new link to open it in the same window?
I guess I could use a Javascript redirect to breast HTML of the web page, but it seems safer for me to use Actionscript within the Flash animation. Anyway - thank you very much in advance for any help.
It is roughly the same as what you would do with html...
navigateToURL (new URLRequest ("http://www.someurl.com"), '_self');
-
AFCS.java does not support the http redirection query
Hello team AFCS,
I just tried the java script for external authentication. By default, when you call new CAA. AccountManager (accountURL);, I get an error as follows:
' GET '. http://ConnectNow.Acrobat.com/myaccount?mode=XML & accountonly = true & failed with status 302 ";
Actually this url will be redirected to " " https://NA2.ConnectNow.Acrobat.com/myaccount?mode=XML & accountonly = true & ' for me. .
However, the script handles the http response only when status = 200, or he review the status as error.
So I added following code to http_get () / http_post (), everything is going well until now.
If (responseCode == 200) {}
......
Return connection.getInputStream ();
}
manage the status of redirection
ElseIf (responseCode == 302) {}
http_get (connection.getHeaderField ("Location"), headers) return;
}
else {}throw new Error();
}
Is this something must be corrected in the next version?
Thank you!
Djinn
This problem has been fixed for the next version of the SDK. Thank you!
-
URL redirects can be configured with XE, and what is the HTTP Server
I wish I could the URL redirects. I'm under XE with Application Express 2.1.0.00.39.
I want to be able to have a URL like www.schoolwebsite.com and when the user presses on it - have redirect to the page of the Apex for the application. I thought I had to use a redirect in the configuration file HTTP and that XE used Oracle_HTTP and I have set up this way.
But I can't find an Apache Directory.
1. what HTTP server is used with XE and Application Express 2.1.0.00.39?
2. can I set up for this type of redirection?
3. do I need to install a HTTP server for this?
Thank you
StephenIf you want to achieve without a separate http server, follow this discussion:
Re: Default PageKind regards
~ Dietmar. -
Secondary HA failover of the server URL does not
Hi all
Ive set up a Foglight HA environment but I keep having a problem getting the fail URL to work.
e.g. the IP address of the primary server 10.10.10.1 (active)
When I type the IP address in the browser to test whether it will redirect to the primary server (active), he gives a page cannot be secondary servers display message.
Can some please help?
Concerning
CM
Is this also the case if you primary fails? If the primary is in place and running the day before may be not accepting connections.
Check this box
https://support.quest.com/SolutionDetail.aspx?ID=SOL46114&PR=Foglight
46114 knowledge article
RSS subscription
The solution that you want to subscribe covers a number of software products from Dell. Please choose the one that is of primary interest;
Title
In a Foglight HA installation what URL you hit to access the console?Description
Question: In a high availability installation Foglight what URL you hit to access the console? You have to know which server is primary and hit this one, or if the server goes down you are automatically redirected to the correct FMS?
Resolution
Answer: You need to hit the URL of the primary there is no common URL. Using a proxy is the way to give users a common URL and automatic redirection in the event of failure of the primary.
and this
http://eDOCS.quest.com/Foglight/567/files/FoglightHighAvailability_Field.PDF
"Mode high availability is a configuration of multiple Foglight management servers in a cluster where a Management Server is the primary server and the others are backup servers. If the primary server stops responding, one of the servers in the cluster HA standby takes over the responsibility of monitoring. HA mode uses redundancy and failover to ensure that Foglight monitoring continues without interruption. "
Golan
-
Error object doesn't support property or method "redirect localized broadband."
Whenever I open my computer, I get the same error message.
A yellow triangle with an exclamation with the following message is displayed: an error has occurred on this page of script
line 15
2 tank
Error object doesn't support property or method "redirect localized broadband."
Code 0
URL: file:///C:Program%20Files%20(x86) Microsoft % 20Office/OFFICE11/INTLBAND. HTM
Do you want to continue running scripts on this page
YES NO
If I click on Yes, I can usually continue what I want to do, but I want to get rid of this error message, then I would be very grateful if anyone can offer help in informing them of what means this message and what I need to do to get rid of him.
Thank you very much
Angus Finlayson
Original title: Script error.
Reinstall the Office should solve the problem.
For any reference later yuou should consider 'Office' in the section for office because it is where are the experts.
-
Using the rewrite URL from Tomcat valve
http://Tomcat.Apache.org/Tomcat-8.0-doc/rewrite.html
Looks like the latest version of Tomcat has added support for the URL rewriting similar to Apache mod_rewrite
I can't seem to find any document other than the page above.
Has anyone used this for, for example, from APEX URL rewriting http://Host/apex / ... to http://host/pls/Apex ? Where should we put the RewriteCond and RewriteRule directives?
Thank you
I went if this, spent about two days trying to figure out how to make with only tomcat and abandoned. I found and used urlrewrite... The instructions are right on the main page but are vague. I gave some 'tips' below. My Info assumes that you have renamed ords.war to apex.war. I tried to put all the details of my exploits/trials/troubles using the Oracle blog but it errored out.
Step 1 tell to put the file in WEB-INF/lib. For Tomcat, WEB - INF is the Tomcat application directory, mine was opt/apache-tomcat-7.0.56. Place it in the directory/lib to
. Step 2 says to edit the web.xml file, adding the text of config for urlrewrite. This file is located in
ROOT/WEB-INF copy text and paste just above the tag at the bottom of the /ROOT/WEB-INF/web.xml file. Step 3 edit the file urlrewite.xml, which does not exist. You must create this file in the same directory,
/ROOT/WEB-INF. Here is the content of the mine. rewrite/pls/apex to pls
(/ pls/apex/f\?p(.*) Apex / / f? p$ 1 You can verify that urlrewite works by accessing the page of admin/test of the local host...
: 8080/rewriting registered. The page displays the rule and what he thinks it will do. You must now restart Tomcat and your old URL
/pls/apex should work for users who have bookmarked your old apex applications. He works for the new URL example: /apex I noticed that you also reference the port numbers in the url of your sample. Take a look to this blog post below, specifically the steps 6 and 7 to learn how to redirect to 80, if you do not have to use a port.
-
URL redirects has stopped working
Our site is to have a big problem with the URL redirects does not. The URL is www.fairmontschools.com. We have redesigned our Web site and became operational on 19 March 2015. Before launching the new Web site, we have imported a bunch of redirects to URL - routing traffic to old pages to the new pages. We had at least 10 people test each redirection that was imported - several times. Everything was working great until a few weeks ago. I started to receive information on why the old pages appeared on the Web site. At first, I thought it was just random incidents of people to see the versions of old pages cached. But last Thursday, I looked deeper and found that the majority of the redirects which had been added do not work. I spent hours to speak with a representative to support BC last Thursday. The result? Nothing. After hours of back and forth, he acknowledged that there is a problem. And that's where it ended. I'm the cat with him again now. But I'm not holding my breath for a solution. It is a very big problem for our website because it means our search traffic going to old pages. We're potentially losing business and our customer's confidence takes a hit. If the chat support can't help, who should I speak to?
Hello!
Your file was picked up at the same time to level 2 Support and is currently wanted in.
We will continue the communication on the support ticket.
Kind regards
Alex
Maybe you are looking for
-
Hello I use Firefox 6.0.1 on Windows 7. I installed software player Free Desktop Clock 2.37 and then Firefox was hi-jacked, so I chose carefully the custom displays. Edit: Free Desktop Clock itself does not hi-jack Firefox. This is another program (f
-
NB200: BSOD when installing Win XP in AHCI mode
Good evening I am trying to install xp on my nb200. I have already installed disable the ahci in the Bios, but it is rather slow... If I change the ahci in the bios mode (compatible... ahci) I get a blue screen and reboots xp... I installed the drive
-
The Cliq is stuck on the start screen.
Hey guys, after a normal day of use with my Cliq from 07:00 I got around 17:00 and put it on the charger, as it was almost dead, I went to charge less than an hour with it and now it is stuck on the start screen of Motorola with the small black bar o
-
try to buy the game for the new Flight Simulator addon and it wants to connect to xbox
Connect to Windows Live Market place and there a network connection issue, or I'm sent to xbox.com for account number that I have not ownbut my grandson's.
-
shortcuts saved on Office Open reduced to a minimum
Any saved on my desktop shortcut is opened in a similar small size and window location. Even though I created the shortcut after the launch of IE 8 with Windows XP quick start icon that always starts in maximized IE.