NB200: BSOD when installing Win XP in AHCI mode

Similar Questions

• BSOD when installing Win XP on Satellite L350-16 b

  I followed the procedure with F6 for the SATA controller and the Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller has been selected.
  Then he began to copy the files as usual, but shortly after order while he was the GUI I got BSOD and would not continue due to protected operating system. The CD was tested on another computer and it worked very well.

  I also use Acronis to make backups, and there is a CD that I can start on and restore from an external drive.
  This CD will not start on the computer, it has been tested on another computer, he worked were very good. It's as if the CD/DVD drive cannot read it.
  I would be grateful if someone could please tell me where is the problem.

  Would it be in the BIOS there is a setting that must be 'twisted '?
  If yes where?

  Thank you
  John

  Are you sure you are using the correct SATA driver? Check it!

  The BIOS must not be twisted, but it would be interesting to know if the same problem occurs if you select the compatibility mode in the BIOS (so you do not need a SATA driver).
  If the same error occurs, it s a problem the CD/DVD player and if not it s bad driver SATA.

• Satellite Pro C660 - 21 d - BSOD when installing Win XP

  Hi all

  I bought 5 Satellite Pro to join my domain name which is a network of Server 2003.
  I am wanting to downgrade windows 7 home windows XP Professional laptops, but I'm having no luck.

  I tried to boot from CD but I have the blue screen of death.
  I also used a windows 98 Startup disk to format the HARD drive, but I still get the error message on blue screen.

  Hoping that someone could help me with this problem.

  Thank you very much
  [email protected]

  Hello

  You must load before installation of WXP start is SATA driver.

  Check, please follow the documents from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Re: Satellite L300-1AP BSOD when installing Windows XP

  I have a new L300-1AP and would like to intall XP Pro but when I try it I get the stop message 0x0000007b.

  Made a new installation disc integrated with all updated sata drivers, I still get the message. I'm not sure about how I would install drivers of third party on the F6 function because it has not a diskette and cany to find how to do the same thing in a CD anywere.

  I appreciate that we should all try to use the vista OS that came with it, but it is a problem of compatibility with older software that I use.

  Can anyone help please?

  In the Microsoft Knowledge Base is an article about it:
  http://support.Microsoft.com/?scid=kb%3ben-us%3B324103&x=17&y=8

  I think that there is something wrong with the SATA drivers. My Satellite L300 works with XP without problems or BSOD when installing.

  The SATA drivers are in this package, and the Intel Storage Manager you can download on the Toshiba site.
  You can create your own installation with nLite (http://www.nliteos.com/) disc.
  If I have integrated the SATA drivers, you do not have to press F6. The HARD drive will be automatically recognized.

• When install win vista family premium 32 with sp1 with any victory at time on a new os hd level is instlled ok but when sp1 installs it freezes

  freezesistalling on a new os installed hd ok sp1 vista freezes causingimproper install

  When install win vista family premium 32 with sp1 with any victory at time on a new os hd level is instlled ok but when sp1 installs it freezes causing no adequate facilities

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• BSOD when installing XP Pro on my HP PC

  Hello

  I have the BSOD while I was installing my XP Pro. Screen saying "computer shut down to avoid the computer being too bad... etc, etc...."

  for the study I want to install xp pro or win server 2003 enterprise edition... Although I installed win Server 2003 successfully but later found that some readers like Ethernet, pci device, controller, sm bus controller Controller & usb mass storage device fail. I tried Realtek manufacturing, but can not find one that is suitable for server enterprise edition. So I go back to installing xp but BSOD stop nowhere getting me and stuk

  MY PC INFO are here

  brand: Pavilion

  model: p6205uk

  Processor: intel celeron e3200 @ 2.4 Ghz

  RAM: 3 GB

  OS: Win 7 Home Premium 64-bit

  SATA IDE BIOS

  I have only IDE to SATA in the BIOS... and 3 GB of RAM, I think that two of them are eligible for XP Pro... are'n they?

  Please help me, what should I do to install XP Pro... would be so nice if you find me way out of this...

  Thanks in advance

  I understand you are trying to install XP on a system initially provided with Win7 and a SATA hard drive. (?)

  If so, you will need create an installation disc custom XP who 'slipstreamed' the disk SATA drivers.

  How to integrate the SATA drivers in the XP Installation disk

  Tutorial video YouTube

  * If you have the option in the BIOS to disable the AHCI / SATA mode and use Compatible SATA / IDE mode then you should not use the method of installing integrated at all.

  If you found my answer helpful please say thanks by clicking on Kudo.

• Blue screen when installing Win XP Pro on the Satellite A100-211

  Hi all.

  I'm started to get really desperate here! I just bought my new Satellite A100-211 and now I want to install my own copy of Windows XP Professional (as the laptop comes with XP Home). But, when I try to boot from my Win Xp Pro CD (with no SP1 or SP2 integrated), I get a blue screen of the STOP just as the installation application reached the phase "the installation program starts Windows! The STOP message says something about a file named "pci.sys".

  I don't know what the problem is or how to install XP Pro! It should be so simple! I even tried the SATA drivers from intel and load the Windows XP Pro install the program installation (F6) with a floppy, but I always get the same blue screen at the same stage of the installation.

  Can someone help me please? Can someone explain how to install Win XP Pro on this laptop?

  Thank you very much in advance! I'm really really freak out with this
  Octavio.

  Hello

  Did you get this error message?
  "stop error 0x7E in Pci.sys".

  I found information on the Microsoft site that you need the latest Microsoft service pack.
  http://support.Microsoft.com/?kbid=839641

• Satellite L750 - error when installing Win XP 0x0000007B

  Hi all

  Urgent help to install Win XP on a laptop Toshiba L750.

  I tried Tosibha support and they will not help unless I pay a fee.
  I asked them what happened to support apparently you must pay about $146 each year for the software support and if you told me this before, I bought the laptop I him would not have bought a toshiba.

  So now I'm stuck with this laptop which is useless unless some experts out there.

  Can tell me how to install Win XP on the laptop?
  Please help thanks

  Camo

  > I tried Tosibha support and they will not help unless I pay a fee.
  > I asked what happened to support apparently you must pay about $146 each year for the software support and if you told me this before, I bought the laptop I him would not have bought a toshiba.

  I've never heard of it but first I have to say that this laptop was not delivered with Win XP and so maybe there's no direct support for this OS on this laptop Toshiba.

  Second, if you want to install Win XP Add SATA driver to the Win XP CD or installation Setup because new specifications to support the new type of controller SATA HDD and this controller has the SATA drivers that are NOT part of the Win XP.

  You should check this FAQ from Toshiba:

  * SATA and AHCI Intel Matrix Storage Management Software: "the installation program found no hard disk units installed in your computer" Error Message during Manual Installations *.
  http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm

  * How to integrate the AHCI driver during Windows XP installation
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  * How to integrate a SATA AHCI driver into a Windows XP Setup CD *.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Could not find a HARD drive when installing Win Xp on a new machine VM

  When I used the VC to create a new VM on the ESX Server 3.5 machine I followed the Wizard completed successfully, but when I turned on this new machine VM and began installing win xp it responsible for windows from the CD files and then stopped at the part where we select the HARD drive to install saying there is no HARD drive to install windows to

  Hello

  Servers Windows automatically takes iSCISI HARD disk drivers because vmware speacially for servers...

  In the case of windows XP please download ISO for the driver (vmscsi - 1.2.0.4.flp) and connect the ISO image of the floppy disk on your VM.

  Start with the diskette and press F6 to install an iSCSI   driver disk (flv) , then continue on your XP installation.

  Thank you

  Konate

• TouchSmart 300 Crash when installing Win 7 OS

  Hi all

  I have a HP TouchSmart 300-1025. It came pre-installed with Windows 7 (Home) 64-bit. I have repeatedly tried to install Win 7 (home) 32 bit. Whenever the system is close to complete the installation of the OS, I get a blue screen that indicates very briefly on the screen. From what I see during his momentary appearance, mentions blue screen and memory dump physical. I can't the system to complete the installation of Win 7 (home) 32-bit. The collision process is repeated. Anyone would be able to provide some useful tips? This system is not designed to receive one other than its image as a stock OS install? I have a hardware problem? I run a diagnostic check in the bios. All controls of spend. I would appreciate help, if none is available.

  Thank you for your time.

  Hello dendriform:

  Of course it goes crashing, you can not install software for Windows 7 32 bit on a 64-bit operating computer you need to stick with Windows 7 64 bit software there is a big difference in OS OK. If you want to run the older version of the software on your 64-bit Windows 7 computer you can always but not all software work can you get grade Windows 7 home 64 bit for Windows 7 Ultimate 64-bit and once that is downloaded will go to microsoft website and download windows xp mode. These computers are not 32-bit computers. That's your problem, and that's why it crashes. Back to Windows 7 home 64 bit software. As you cannot install software 64-bit on a 32-bit computer with a change of 3d parts of computer hard drives and cards that never need to change the.

• BSoD when installing driver display on Satellite P200D - 11 L

  I just installed Windows 7 and everything works fine but I decided to install the drivers of Toshiba and when I was installing the display driver (for ATI mobility radeon HD 2600) I've got the so-called 'Blue screen of death '. Then every time that windows starts, he gets the same blue screen. Windows start repair corrected this by using the system restore.
  I think that windows 7 installed a different driver and they interfere with each other. The other driver works fine for now.

  I also tried to uninstall everything first, but then would not even to begin the installation.
  So, what should I do? I think it's fine, but I want to ask someone with more experience first.

  Hello

  You what version of Windows 7, 32-bit or 64-bit?
  The Toshiba page shows only a tested Windows 7 32-bit driver and it should work on the laptop.

  You can also post the exact code of BSOD? Maybe the Microsoft Knowledge Base can provide an answer for this code?

• Satellite A300 BSOD when installing Windows XP

  Bought a new Satellite A300 that ships with Vista and a load of other rubbish.
  Set the BIOS to boot from the installation CD of Windows XP, but just after loading the drivers and files and just before
  from Windows XP installs, crash with blue screen advising me:

  A problem has been detected and windows has shut down to prevent damage to your computer,
  blah, blah. In other words blue screen of death that ends with this message - STOP: 0xF78D2524, 0 x 00000000, 0 x 00000000

  Now, I've had quite a few machines over the years, but never something like that before you encounter when you try to
  install an operating system.

  Any advice appreciated, otherwise unit will have to go back to the seller.

  Thank you

  Joe

  Access the BIOS-> SATA mode choose and is compatible-> save the changes and exit the BIOS.
  Then try to reinstall Win XP with SP2.

• Old computer BSOD when installing XP and randomly after installation

  I'm repairing an old computer (5-6 years old) who has problems.  Originally, it was full of viruses and was completely sunk, so I did a cleanup of the HD and reinstalled windows... However, increasingly, the owner complained to get BSOD once in a while.  It happened during my installation of windows as well.  The disc to load everything upward, and when he is at "Windows Installation", he gave me a BSOD error:

  STOP 0X0000006F (0XC0000020, 0X00000000, 0X00000000...)

  I did a Memtest86 + to verify memory, and after 10 passages, there was no error.  I also cleaned all the dust in the computer, which helped me to get windows installed, but has not fixed the random BSOD would happen after installing windows (this happens rarely, making it difficult to reproduce).

  At first I thought it was the hard drive, because the hard drive is old and use IDE cables, but he spent under UBCD Disk Diagnostic tools.  In addition, on a hunch, I tried the first 95, and of course it enough it crashed the computer.  What is the cpu?  Or something else going on?

  Single Minidump file has been generated, but I am including here:
  http://CID-676f5f905e0a077b.Office.live.com/self.aspx/minidump/Mini021611-01.dmp

  I think that it is likely that the CPU or the motherboard is at fault. If it's a very old PC, not worth the effort/cost to recover. I recommend a new PC.

• Cannot run XP sp3 on x 61 Tablet - BSOD when installing

  I'm trying to install XP pro sp3 on my X 61 Tablet, but every time I try I get a BSOD with an 0x0000007B error.  I've tried everything

  I see:

  (1) replacing the sata BIOS ACHI <-->compatibility mode
  (2) copy an installation of XP in a VM on the HARD drive (gave me the same BSOD)

  (3) f6 to insert ICH8M SATA drivers for the XP installation process

  (4) slipstreaming ICH8M SATA drivers in the XP installation using nlite

  I run win 7 on this machine perfectly (it came with vista, which sits on the recovery partition).  In addition, I would install XP from an iso on a USB key using the iso pendrivelinux multiboot (it's grub). I don't have a CD player, I can use with this machine.

  I use the latest version of bios 1.24.

  Here are somethings, that I have not tried:

  (1) install the drivers for x 61 in a virtual machine, and then copy the virtual disk on the real disc.

  (2) using a real CDROM

  (3) buy lenovo xp recovery discs (they want $80, which seems a lot to me). However the support of people said there was no guarantee that would work either.

  Someone at - it ideas?

  
  

• New hard drive for HP6930 - BSOD when installing the OS

  I recently bought a new hard drive for my HP6930 so I can switch between my work and home demands (they cannot reside on the same hardware).

  Both drives are Fujitsu SATA 160 GB.

  After swapping the drives and boot from CD to install the operating system - I get a BSOD, hardware failure - "the system was arrested to prevent damage...". "with a comment about the check of the hard drive.

  Can anyone provide insight into what I'm doing wrong?

  Thank you

  Dave

  You can integrate the drivers Sata (ICH9M-E/M SATA AHCI) and burn a new cd XP with nLite .

   

  Here is a guide showing how to integrate and here drivers Sata. 7-ZIP or Universal Extractor are good at unpacking the installer.