Similar Questions

• Using CONCSUB with default settings

  I need to call CONCSUB, but does not provide all of the settings. Is it possible to take the default values or null? I tried null and who does not. More precisely...
  
  Program simultaneous 'register Extra Information Types (EITs)' HR Admin responsibility to register for a new type of information. Run the program in the forms works fine, but CONCSUB complains about the number of parameters. I tried to pass NULL for the last 3 unused parameters, but he didn't like that. How can I say CONCSUB to use null or default to the settings that I don't need to provide?
  
  CONCSUB apps/xxxx \.
  BY------.
  "xxxx HR Administrator".
  username.
  WAIT = Y.
  SIMULTANEOUS.
  BY------.
  PERREEIT.------
  PER_PEOPLE_INFO_TYPES
  "'Employee of the store additional info' '.
  Yes
  "" United States "
  NULL VALUE
  NULL VALUE
  NULL VALUE

  890898 wrote:
  I need to call CONCSUB, but does not provide all of the settings. Is it possible to take the default values or null? I tried null and who does not. More precisely...

  Program simultaneous 'register Extra Information Types (EITs)' HR Admin responsibility to register for a new type of information. Run the program in the forms works fine, but CONCSUB complains about the number of parameters. I tried to pass NULL for the last 3 unused parameters, but he didn't like that. How can I say CONCSUB to use null or default to the settings that I don't need to provide?

  hope this goes well with you

  To pass null to CONCSUB parameters, use ' ""' without spaces for each parameter null.
  In words: a quote single quote single quote double quote
  Here is an example of syntax CONCSUB with null parameters:
  CONCSUB oe/oe OE "Order entry Super User" JWALSH SIMULTANEOUS XOE XOEPACK 3 4 ' ""' 3
  2. to call a concurrent software using PL/SQL:
  (i) it is enough to insert a row in FND_CONCURRENT_REQUESTS apropriate settings and commit.
  (II) invoke the procedure SUBMIT_REQUEST in the FND_REQUEST package.
  FND_REQUEST. SUBMIT_REQUEST ("AR", "RAXMTR", "", FALSE, "Autoinvoice Master Program", sc_time, FALSE, 1, 1020, 'VRP', January 1st 00 ', chr (0))

  ;) AppsMasti ;)
  sharing is caring

• Use the default values of the parameters when calling FND_REQUEST. SUBMIT_REQUEST

  Hello
  I submit a program concurrent with FND_REQUEST. SUBMIT_REQUEST in pl/sql.
  The simultaneous program settings are attached to sets of value and have default values.
  
  I want to give these parameter values only, which do not have the default when sending the request of pl/sql.
  
  That doesn't seem to work. Is it possible that I can get the defaults settings kick when I submit pl/SQL?
  
  Thank you
  SITA
  
  Published by: user451773 on December 3, 2012 05:05
  
  Published by: user451773 on December 3, 2012 05:06

  You will have to code a "preliminary stage" for it... aka... a function that calls your conc.req.

  the FND_REQUEST. SUBMIT_REQUEST will ask you to provide all the necessary at the start of the conc.req parameters. It's also what happens when you start through forms. So, you will need to code something that checks the settings which are given by you and for those not given not check LOV configuration and query by default.

  This is how you can solve this problem. It will need an additional coding.

  Kind regards
  Johan Louwers.

• Can we use FND_REQUEST twice in the same package

  Hello
  
  In one of my procedure, Iam calling the program fnd_request.submit_request twice after the initialization of the settings.
  
  first time:

  If error_condition Met then 
  
  fnd_global.APPS_INITIALIZE(v_user_abc,v_resp_i d_abc,v_appl_id_abc); 
  
  id2 := FND_REQUEST.SUBMIT_REQUEST 
  (            'TEST',
               'SSPHTRD',
               'Email',
               NULL,
               FALSE,
               v_file_name,    -- 
               lv_conc_program_name,
               p_email_to,
               'POXXXX',       -- Main Procedure Concurrent Program Name
               lv_comment,
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ');
  commit; 
  
  ELSIf no errors then 
  
  select user_id 
  into v_user_abc 
  from fnd_user 
  where upper(user_name) = 'ABC'; 
  
  select responsibility_id, application_id 
  into v_resp_id_xyz, v_appl_id_xyz 
  from fnd_responsibility_tl 
  where upper(responsibility_name) ='XYZ' 
  and language = 'US'; 
  
  fnd_global.APPS_INITIALIZE(v_user_abc,v_resp_i d_xyz,v_appl_id_xyz); 
  id2 := FND_REQUEST.SUBMIT_REQUEST 
  (            'TEST',
               'SSPHTRD',
               'Email',
               NULL,
               FALSE,
               v_file_name,    -- 
               lv_conc_program_name,
               p_email_to,
               'POXXXX',       -- Main Procedure Concurrent Program Name
               lv_comment,
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
               ' ', ' ', ' ', ' ', ' ');
  commit; 

  The POXXXX program is not going to get fired the second time, when this procedure is called.
  
  I use FND_REQUEST even send emails, newspaper is getting printed in view_log.
  
  But the email does not send...
  
  
  Any help is appreciated
  
  Published by: Linus on 11 June 2012 23:29

  The second shipment is an elsif so both programs will never get fired.
  It will be the first or the second.

  Also check if the program is to run, but some other issues prevent e-mail. Try to send another program in the ELSE part.

  Sandeep Gandhi

• Scanning PC settings appears every day

  Whenever I have begin to macOS, I get a window of "Scan-from-PC. It does list some scanners and does not include the option Add / Remove. There is a "Scan of operating Panel settings" button which takes me for a nearly identical and all as useless screen. And there is a? Help button that signals "the subject is currently unavailable.

  Any suggestions on how I can do this, go far? Granted it's only a click, but it's a nuisance that I get to enjoy every day.

  Thank you.

  Uninstall the scanner software - it doesn't seem to be compatible with macOS Sierra.

  You can also check the preferences > users and groups > [you] > login items and remove (with the minus sign) any scanner related Articles.

• Is there a way to read the settings in a .pst file?

  Hi all!

  I looked everywhere for info on this and found nothing. Anyone know how to read the settings contained in a .pst file? I found some that I really like, but would like to know what they are doing. In other words, what are the different used FX and what are their settings? I would use some other users have created as a starting point to create my own channels of FX. Open in a text editor doesn't show something like:

  @^@^@D^@^A^A^@^@^@^@^KEMAGPPST^@^@^A^H^@^@^@^@Âp^@^@^@^@^@^@^@^@^@^@^@^@^@^@¿< 80 > ^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @? < 80 > ^ @^ @@ ^ @^ @^ @

  Is there a way to show somehow what they do and what they use the settings?

  Thank you!

  You're right, the settings file contain only of the code when opened in a text editor.

  But why don't you just open settings in a project, this way of seeing exactly what Plugins are loaded. Opening of the plug-in window will show you their parameters.

  The only restriction is that GarageBand has only a limited view of Plugin window which can not show all settings. To do this you must open in Logic Pro X.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Impossible to change the settings for the overlap of the midi regions

  Hi people

  Trying to change my project settings so that my midi regions overlap or merged.

  However, when I select the different options in the project settings - setting won't change even after choosing, he. All the default to replace & I can't change anything...

  Any ideas?

  1 - ability to select IMAGE options, but as soon as I click on it it goes back... (see image 2)

  

  IMAGE 2

  

  Weird. Since nobody had a suggestion again I'll propose to eliminate most bizarre factors:

  -Check the permissions to read / write to the project folder, you are working, and where the logic is in. You have full access?

  -Detach the Audio interfaces / external MIDI, reboot and external logical beginning without entries/connections

  The same problem happens for tracks Audio parameters too?

• Settings lost VPN - iOS 10.0.2

  I had stored in my iPad VPN settings. VPN connections worked well until the latest iOS update. Now ALL my VPN connections disappeared. To make it even worse-, I am unable to put once again, because there are new mandatory fields: VPN type and shared key. I don't have the slightest idea how to fill them because I never need them when connecting to the VPN through my iMac - please see the screenshot.

  It drives me crazy. I welcome any suggestion.

  Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra

  Preparation for iOS system administrators 10 and macOS Sierra should stop using PPTP VPN connections. Learn about alternatives, you can use to protect your data.

  If you have configured a PPTP VPN server, 10 iOS and macOS users Sierra will not be able to connect to it. iOS 10 and macOS Sierra will remove any profile VPN PPTP connections when a user upgrades from their device.

  Even if the PPTP protocol is always available on iOS 9 or an earlier version or OS X El Capitan and earlier, we do not recommend that you use it for secure, private communication.

  Alternatives for PPTP VPN connections

  Try one of these other VPN protocols for authentication by user that are safer:

  • L2TP/IPSec
  • IKEv2/IPSec
  • Cisco IPSec
  • VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall

• Search iPhone settings for "Auto-Lock" does not work

  Hello

  Does anyone know why the Auto-Lock setting is not to be found when you use the search at the top of the main settings page.

  From time to time, when I'm on a conference call, I like to set the auto-lock on 'Never', so I can leave the visible main phone screen to mute/one-mute the call without having to unlock the phone. I have the memory of a goldfish, so I do not remember that it is in the section "Viewing and brightness" and that is why I use the search at the top of the main settings page field. I would normally enter 'Auto', and it would be "Auto-Lock" for me.

  Since the release of iOS10, the la recherche search can't find this definition more although it still is in the section "viewing and brightness.

  The search for other settings seems to work, but it seems that it is just this one, but I have not actually tried too.

  Any ideas on what is happening and how I could get to find the Auto-Lock in the future?

  Thank you

  B1GPappaSmurf wrote:

  Any ideas on what is happening and how I could get to find the Auto-Lock in the future?

  Seems to be a bug, so nothing you can do but remember where the parameter is and report the bug:

  http://www.Apple.com/feedback/iPhone.html

• Problem with 10.10.5 security settings

  I'm on 10.10.5 Yosemite on an iMac.  I'm trying to give a program permission to control my computer under Security & Privacy / Accessibility.

  When I click on the padlock at the bottom left to 'Edit' and input my user and password, it does not reject the entry as incorrect but it never unlock the field of accessibility for me to make changes.  I don't know that I did this exact process before without problem so I'm confused as to what is happening.

  I tried in two accounts different administrator and nor will I can unlock the lock or little down in the left corner to make changes for accessibility.

  Any ideas?

  I would add just after that I got my admin info there is a very brief moment where the accessibility settings appear to unlock and then it crashes again.  (like maybe 1/3 of a second).

  Also, I restarted the computer one or two times to see if it would make a difference... No.

• 6s unlocked IPhone be locked after erase all content and settings

  6 s unlocked IPhone has been locked after erase all content and settings

  This statement should help you to disable find them my iPhone Activation Lock - Apple Support

• How to set the type of wifi (WPA/WPA2) security settings on my new Apple Time Capsule

  I just got my new 3T Apple Time Capsule and have implemented the new network, but I can't seem to find a way to check if the security settings WPA/WPA2 etc are defined.  How do I do that?

  By default, the settings are WPA2 Personal. There should be no need to change it.

  To view the settings and make changes to them, you need to open the AirPort on your Mac utility.  Are you still using OS X (10.6.3) you specify in your profile?

• Deselection of voice on improvement in Inspector restores the default settings.

  Voice more improvement is a combo of compressor, deEsser, and EQ sound effect. I changed the settings, but when I deselected the effect in Inspector (clicked on the little blue box) to ignore the settings then changed the effect... all the settings changed back to their default values (except for the 'Quantity' slider). This isn't how it's working. Deselection of effect should work as a derivation not a reset. If someone else can confirm this?

  This happens even to the VOE effect when saving file > save Audio effects presets, inserted on clip, unchecked then reselected in the Inspector.

  John

  10.10.4 yosemite

  10.2.3 FCPX

  I see the same thing. I agree that it is not normal.

• Missing language format settings

  Perhaps nobody noticed, but Apple have removed in Sierra and iOS 10 th possible to refine the language settings. In El Cap and before there is a 'Language of Format' parameter in the region and System Prefs/language / advanced.

  Now I get dates like the 00/00/00 00/00-00 and not as month and day names are displayed in the language of the system and NOT on the language of the regions.

  So in my case, the language of the system for Mac OS and iOS is EN but the region is set to Dutch. In the th is I had mints Dutch and the names of days displayed as well as the 00/00/00 a 00-00-00.

  Please bring pulde for iOS and Mac OS settings.

  P.S. many forums MacRumors etc. have noticed this issue too.

  Apple remedy through say

  http://www.Apple.com/feedback

• Settings &gt; general &gt; keyboard &gt; shortcuts toggle?

  I am running iOS 10.0.2 on my Plus 7 iPhone and my iPad 12,9 Pro.

  When I go into settings > general > keyboard IPAD Pro, there is a "Shortcuts" under the rocker switch to "Enable Caps Lock" and above the toggle to "Predictive". (Note that the rocker "Shortcuts" also appears on an iPad running iOS 10.0.2). 2 Air

  On iPhone 7 more, however, there is no such rocking "shortcuts".

  Because, on this same page settings, both devices have an "Alternate text" option that you can type on enter custom keyboard shortcuts, I have no idea what the rocker "Shortcuts" on iPad is for.

  I did on 1 million various searches on Google and you have not found the answer.

  Could someone kindly enlighten me?

  Thank you.

  The shortcuts are for tools to the left and to the right of the top of the keyboard that you see here. The iPhone screen is probably too small to make use of this feature.

  Shortcuts for editing text and paste it from the Clipboard.