Focusing on the entrance of type textfield

Similar Questions

• Connection (or not) the entrance to 'type' of function 'variant data?

  I noticed (again i) assumed that when I connect an output "Data Variant" connector of a VI or a known type indicator, the thread automatically adopt the correct type. Exports means that I don't have to connect a wire to the 'Type' of the 'variant data?

  There are many similar situations where this shortcut does not work. For example, the variant of wiring data function for a bundle by node Name will automatically select the target type of the conversion. I suppose that the index case is a very specific optimization, and this isn't a generally available shortcut.

• TextField focus at the beginning. How?

  Hello. In my project, the TextField is not visible to the user, the fact is that I have an input textfield and a dynamic textfield. When you type in the first textfield entry, the text is duplicated in the second dynamic textfield. I wish that when I run my SWF (or EXE), I don't need to click within the textfield entry to write in it. I want to run the swf file and I directly use my keyboard.

  I don't know how to give the focus to the input textfield, initially... every time, we need to click within the textfield, and then we can write in it...

  Is there a solution, please?

  Focus:

  internship. Focus = textFieldName;

  Unfocus:

  internship. Focus = null;

• How to get the focus and the slider to textfield when the Application loading

  Hello
  In my application, I need the focus and the cursor on a control textInput that soon the application is loaded.
  The Focus can be set by textInputname.setFocus () in the full demand creation event. It works but
  the cursor do not appear there until what the user clicks anywhere in the area of application. Y does it have no way set cursor on
  the textfield on request load so that if the user enter something without clicking, on request, the text should go to this
  TextField.
  I tried the following things, but it do not cursor to textInput, only the focus is set with this,
  textInputname.setFocus ();
  CursorManager.setFocus ("textInputname");
  
  If anyone knows the solution please answer...
  Thank you...
  
  

  ' v Jay"wrote in message
  News:g6ume8$b8e$1@forums. Macromedia.com...
  > Hi,.
  > This logic to set the cursor to the load of the application with callLater do not work...
  > Do you have another idea

  The problem is that the reader Flash itself has not the focus. I think so
  There are hacks JavaScript that you can use to try to correct this, but I have no
  believe that they are reliable.

  HTH;

  Amy

• set the focus to the text fields named incrementally

  I created the many (hundreds) of the fields of text through actionscript. I gradually name them and place them on the stage and then subsequently access to set focus.
  I use create a textfield object:
  var txtbox:TextField = new TextField();
  
  and then use a name incremented to the text field to identify it later:
  
  var txtname:String = txtn + txtcnt; txtcnt is a number incremented variable. txtn is a string variable.
  txtBox. Name = txtname;
  
  I add an eventlistener on stage. The event listener works very well and has a companion function.
  I can identify the text field I want access once the move is running through his name.
  Then I use this .name property to set the focus:
  
  internship. Focus = "txt88";
  
  Again, "txt88" is the .name of the text field.
  
  What I am doing wrong?
  
  ypeError: Error #1034: Type coercion failed: cannot convert "txt88" in flash.display.InteractiveObject.
  to MethodInfo-(200)
  
  
  Also, I tried to use the variable incremented during this step, but get a msg of error affecting the variable this way textfield name.
  var txtname:TextField = new TextField();
  

  Awesome!
  Who did it! I appreciate your help. It is a major obstacle and I went through the help files and books without success. (If it works fine in the AS2 version!)
  Anyway, you are a lifesaver. Thank you.

• keyboard focus to the control of the chain

  I have a sub - VI that is called automatically to the top in many situations in my main VI.  Essentially, the user could use the mouse to interact with him, but I also want the user to have the ability to use the keyboard.  There are control only one string (called display) that the user can type in, and everything I want to do is for the 'focus' on her keyboard so that the user can type into it without first having to click on it.  Is this possible and if so, how?  I tried and so far failed.

  I also have another question about the attached VI.   You'll notice that I use two local variables for the above chain control.  I tried to eliminate the possible race conditions, but always wonder if there is a medium or even necessary to get rid of them.  Please notify.

  Thank you in advance.

  James

  True thread for "property > focus button.

  Ben

• How can I connect 2D Boolean table at the entrance to the structure of the case?

  Hello

  I would like to know how to solve this problem. I try to connect the output of a digital 2D painting and a constant number of 'BIG' before you connect it to the entrance of the structure of the case. An error message appears and it shows ' the type of the source is a 2D boolean array. The sink type is Boolean "."

  I tried to 'disable indexing' on the box of the structure of the case, but the error remains. Would appreciate any comments on it.

  Entry 0 third entry in the index table, not the other.

• Change the focus to the next field in the screen!

  Hi, I have a problem change the focus in the fields, suppose I have a list at least 200 records field and I need to change the focus in the field below (accept button)... remains the path to achieve this? in denavigationde?

  Screen

  -Manager

  -Manager

  TextField - button

  ListView-

  -Manager

  -Button (Accept)

  My screen can be so, but not necessarily be so.

  Thank you, in advance.

  It is relatively easy to divert attention if you know where it's going.  You can just do 'setFocus '.

  It is also relatively easy move focus generically.  For example, in a field, you can do things like

  Manager m = this.getManager ();

  int myIndex = this.getIndex ();

  int managerFieldCount = m.getFieldCOunt ();

  Field nextFocus = null;

  for (int i = myIndex + 1; i)< managerfieldcount="" ;="" i++="" )="">

  Field testField = m.getField (i);

  If {(testField.isFocusable ())}

  nextFocus = testField;

  break;

  }

  }

  If (nextFocus! = null) {}

  nextFocus.stFocus ();

  } else {}

  You can browse to the Manager and get the next field in the Manager of your Manager.

  Hope that gives you some ideas.

• TableLayoutManager doesn´t focus in the Manager with two focusable elements

  Hello

  I m using TableLayoutManager in my project. It is an example of my problem:

  I have this code:

  public MyScreen() {
          setTitle("TableLayoutManager_Example");
  
          VerticalFieldManager vfm0 = new VerticalFieldManager();
          vfm0.setBorder(BorderFactory.createSimpleBorder(new XYEdges(10, 10, 10, 10), Border.STYLE_TRANSPARENT));
          VerticalFieldManager vfm = new VerticalFieldManager();
          vfm.setBorder(BorderFactory.createRoundedBorder(new XYEdges(5, 5, 5, 5)));
  
          TableLayoutManager table = new TableLayoutManager(new int[] { TableLayoutManager.USE_PREFERRED_SIZE,
                  TableLayoutManager.SPLIT_REMAINING_WIDTH, }, null, 0, Manager.NO_HORIZONTAL_SCROLL
                  | Manager.NO_VERTICAL_SCROLL);
  
          LabelField lb=new LabelField("Label1    ");
          HorizontalFieldManager hfm=new HorizontalFieldManager();
          TextField tf=new TextField();
          LabelField lb2=new LabelField("Label2",Field.FOCUSABLE);
          tf.setText("Text");
          tf.setMaxSize(5);
  
          hfm.add(lb2);
          hfm.add(tf);
  
          LabelField lb3=new LabelField("Label3");
          LabelField lb4=new LabelField("Label4",Field.FOCUSABLE);
  
          table.add(lb);
          table.add(hfm);
          table.add(new SeparatorField());
          table.add(new SeparatorField());
          table.add(lb3);
          table.add(lb4);
  
          vfm.add(table);
          vfm0.add(vfm);
          add(vfm0);
  }
  

  The problem is that I have can´t emphasis in the TextField. If I just add lb and hfm components to the table, it works, but if I add other components focuss (as example) I can´t focus in the TextField, the emphasis in Label4:

  

  What can I do?

  Thank you.

  I ve found a good solution. I ve replaced the TableLayoutManager navigationMovement method. This is the code:

  /**
       * Navigation movement to allow for both cell to cell within a columns and row movement
       */
      protected boolean navigationMovement(int dx, int dy, int status, int time) {
          int focusIndex = getFieldWithFocusIndex();
          int dirY = (dy > 0) ? 1 : -1;
          int absY = Math.abs(dy);
  
          for (int y = 0; y < absY; y++) {
              focusIndex += _columns * dirY;
              if (focusIndex < 0 || focusIndex >= getFieldCount()) {
                  //#ifdef BlackBerrySDK4.5.0
                  this.invalidate(); //ref #217
                  //#endif
                  return false;
              } else {
                  Field f = getField(focusIndex);
                  if (f.isFocusable()) {
                      f.setFocus();
                  } else
                      y--; // do it over again
              }
          }
  
          int dirX = (dx > 0) ? 1 : -1;
          int absX = Math.abs(dx);
          for (int x = 0; x < absX; x++) {
              focusIndex += dirX;
              if (focusIndex < 0 || focusIndex >= getFieldCount()) {
                  //#ifdef BlackBerrySDK4.5.0
                  this.invalidate(); //Ref #217
                  //#endif
                  return false;
              } else {
                  Field f = getField(focusIndex);
                  if (f.isFocusable()) {////////////////////////NEW CODE /////////////////////////////////////                    if(f instanceof Manager){
                          int fieldsInManager=((Manager)f).getFieldCount();
                          if(fieldsInManager>0){
                              for(int i=0;i
  I'm looking for a manager within the cell. If I found it, I put emphasis in its elements. It works with a Manager with one or more of the focus object elements.
  
  If you see it is good, you can add this code to your original code
  Thank you.
  		   

• Focus on the multiple field - like task and Notepad

  Hi all, I would like to implement it is something like Notepad.

  I am interested in the thing in particular is that it shows the development in two places, in this case, mainly on the textfield and the ListField.

  When the user types TextField is populated regardless of where the current highlighted the position of the LisfField.

  Advice or direction would be appreciated.

  You are talking about using a KeywordFilterField, there is a sample included in the JDE I belive showing how it works.

• Delay / the entrance of the mouse in Windows 7

  After exhaustive tests with benchmarking and using the exact same hardware with the same exact drivers I arrived at the following conclusion.

  Any entry in the system in Windows 7, takes from 30 to 32 ms longer to deal with.

  My system is an i7 975, 12 GB 1600 mhz DDR3 RAM, a raid 0 2 Velociraptor 10 000 rpm configuration and a HD 5970 graphics card. Which is basically an apex performance from December 2009.

  Why windows 7 have this slightly noticeable lag? Would help resettlement?

  Would it be because of all the above materials?

  Answers would be appreciated.

  Hi Redknave,

  Welcome to the Microsoft Answers site!

  According to your description of the computer hardware is not at all a problem for the delay. This could happen because of the substantive application sometimes. You can check by putting the computer start-up in minimal mode and whether the background application is initially delayed.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you start office check if the problem persists, follow the steps in the article and find out which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  A clean install is always a good option if you have doubts about the operating system. Check if there is any lag in the entrance before installing any third-party application.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I stop Windows Search to steal the focus on the text input area?

  How can I stop Windows Search to steal the focus on the text input area?

  I can type about three characters maximum and then results focus, and I have to click with the mouse to the area of searching at the end.

  For example - I want to get "Img1.bak".

  I type 'I' "m" and then I'm whisked away and the 'g', I typed just takes me to the "great songs by Imogen Heap.txt" or what is the first result starting with g.

  I have to reselect the text box and add a letter or two at a time to get what I need. Very frustrating.

  Hello

  Thanks for the display of the query to the Microsoft Community. I'll do my best to get the problem resolved, but until we start could you give us some more information?

  1. Since when are you facing questions?

  2. you have any antivirus installed on the computer program?

  3. are you aware of any recent software or hardware on the computer changes?

  You can go through the steps in the article and check if it helps. Here is another article to improve Windows searches using the index.

  Hope this information was helpful and let us know if you need help in the future about Windows. We will be happy to help you.

• Tabular forms – test whether cursor/focus in the last line (Apex 5.0)

  I would like to optimize my sub fast data entry form. I have already added dynamic actions for Excel style and down navigation with up and down keys and also auto-insert new line when you press enter on the last field.

  The last thing that I want to achieve is to creata a dynamic action trigger that fires only when cursor is in the last row of tabular presentation. I tried to do that with the function. is() JS, but without success.

  Is there a way to test whether the current row (the row with focus) is the last line in the form of tables?

  Yes, look that I wanted to accomplish was that, if the cursor is in the last line (column_name1) that if the user presses THE button the last row is deleted and cursor is focused on the previous line (column_name2).

  After numerous tests that would be a DA who works for me:

  Event: Down key

  Selection type: jQuery Selector

  jQuery selector: .column_name1

  Condition: Expression JavaScript: (event.keyCode = $. ui.keyCode.UP) & (.closest("tr").is$ (this.triggeringElement) (": last-child"))

  Code:

  $(this.triggeringElement).closest("tr").remove ();

  $('input.column_name2:last').focus ();

• Adjustment of focus and the deletion of a field after the length control

  I have a form I'm working on that requires a few basic length checks but I have a problem with one of my fields. In the case of change, I have this:

  If (xfa, event.newText.match (/ [^ 0-9 /])! == null) {}

  this.rawValue = null;

  xfa.host.setFocus (this);

  }

  ElseIf (xfa.event.newText.length > 9) {}

  this.rawValue = null;

  xfa.host.setFocus (this);

  }

  but it will not draw the field or set the focus to the field when he fails to verify. I'm not sure what the problem is.

  Thank you!

  I use dynamic PDF... the code I gave you behaves exactly how you want it to be...

  the problem with your code when I test it, is because when you use the corresponding method, it does not return true or false, it returns only the first character of the string... you should try using the RegExp object rather...

  In addition, when you try to use (this.rawValue = null) in the case of change, it cannot apply this line of code because the rawValue of the field doesn't have a change not yet, no, unless you have left the field. You should always use the xfa.event when you try to play with the value in the case of change of a textfield...

  So try instead... I hope it will work

  var reg = new RegExp(/[^0-9]/);

  If (reg.test (xfa.event.newText)) {}

  XFA. Event.change = "";

  xfa.host.setFocus (this);

  }

  Do not use else if

  If (xfa.event.newText.length > 9) {}

  XFA. Event.change = "";

  xfa.host.setFocus (this);

  }

• Standard rates and the entrance of the element do not allow to enroll in the NEW program

  I have a problem when creating a new program that has a weekly reference period. Currently I have age on a two-week program that must be moved in the weekly program. (NOT ALL EAS IS MOVED). I'll be the error of:
  
  "You cannot register a person in a plan that includes more than one rate of activity with the same element and the input value. Flat rates ADD - provider - ER and ADD - provider - ER - weekly uses the same element and input value and are attached to the subject of compensation. You must change your configuration so that these rates of activity do not use the same element, the input value and purpose of compensation or register the person in a plan that does not include participation rates with the same element, the input value and object of compensation. "
  
  -NOTE: the entrance of the same element and the input value are used in the same plan for different types of employees already (options) (i.e. service provider, hourly, salary)
  
  Standard rates use the same element and input value, but the object of compensation called a different program and is not the same combination. (EITHER 1. Weekly program-ADD-Service Provider-ER 2. Benefits of the program - service provider of ADD - ER). I need assistance or advice to fix this problem. I'm trying to enroll individuals in the current program so that it will not draw the same entry element but without success. I tried to register for a 'new' employee so that has not already been registered in any program and still receive the same error. Any suggestions?

  Hello

  Either way, I got the same error today and here is what happened in my case: in some sort eligibility has failed and the life event gave eligibility for both options using the same rate. This is why the error message.
  The error message is misleading and makes you look to the configuration of the rate.
  However, the central question is if employee is faulty (in my case) for the two options (Oipls in my case) including standard rates are atatched to a single item, then obviously the system think, you assign the same employee element twice.

  Check if it is the case with you as well.
  To do this, you can do the rates involved as 'dormant' at an earlier date - run an event admin and test. Making inactive will decouple the rate to the eligibility/electability.

  Let me know if this helped.

  Kind regards