Folders My Documents and my merged pictures

Similar Questions

• Help me REMOVE the duplicate folders My Documents and others created automatically when I install Virtual PC in XP Mode to run older programs. I removed the computer virtual and XP, but it does not remove the My Documents folders duplicate.

  While trying to run some older programs (Corel) in characteristic as advertised XP mode from my new Dell laptop and Windows 7 PC, I created Virtual PC and XP mode Setup.  Somewhere during this process, the system created in double My Documents, my pictures, my videos, files etc. that you can not (no authorization) access through Windows 7.  I understand that they may is accessible while you were in Virtual PC.   I came to my senses after the poor performance of Windows XP/Virtual PC and decided to remove remove these programs (and buy Corel for Win7).  I followed the instructions for a good dismantling of Microsoft who think in the end, these inaccessible files would disappear and I would have a struture of own file again.  However, duplicate inaccessible folders still remain and I can't get rid of them.  Believe me - it's a pain because it's very confusing when you browse folders.   There is no files in these folders, so there is nothing that we need to go.

  Please, for the love of peace in my family, tell me how I can get the PC back where it was when we first install Windows 7.   And - what's the problem of not having a complete control of my pc?  Personally, I'm offended that Microsoft has locked the users so that they cannot use their own brain - apparently I'm not the only one...  If you are willing to share, I would appreciate a detailed response.

  Hello, SuperMomNot

  Where are these records?

  Virtual PC will create only shortcuts to installed applications in XP mode, no records. The ability to open and save files that are stored on the host computer is made via the network sharing of files between the two.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unknown folders in Documents and Settings

  Here is a link to imageshack for two .jpeg files.

  http://ImageShack.us/photo/my-images/13/fdrivedocumentsandsetti.jpg/ and http://imageshack.us/photo/my-images/29/documentsandsettings112.jpg/

  Both are Documents of XP Home and settings folder, one is archived from a disk image of the 24/11/2011, and the other comes from a backup copy of the Documents and Settings folder from 02/02/2012.  It is the second that I have questions, especially since 02/02/2012, system showed signs of an unknown infection affecting the operation with the mouse and the keyboard text write operation.  (Both were slow).

  System restore operation seems to be successful, restarted, but system restore incomplete or successful never appeared.   Features of safety on all security programs program had been lost or disabled to a certain extent.

  Only use was to restore a disk image of the 24/11/2011.  That is why the image of archives of 24/11/2011.

  Any info on what NetworkService and LocalService records are?

  Joe

  Hello
  You can check these links:

  Network service Account

  http://msdn.Microsoft.com/en-us/library/ms684272 (v = vs. 85) .aspx

  Local service Account

  http://msdn.Microsoft.com/en-us/library/ms684188 (v = vs. 85) .aspx

• Import the Word Document and the merging of projects

  Please see this link

  Thank you Rick (Captiv8r).
  New - my intention was not not to annoy people from Adobe. I wanted my question to be seen by other users of forume who may have the same problem I encounter. They may even have some good suggestions.
  I'm open to anything right now.

• Merge document and merge Word using Excel data does not display the result required in the merged document.

  I have created a merge document and mail merge in word using an excel sheet spread as a data source.  Initially, no sign of £ showed in the document among other formatting problems.  I have (finally) found help explaining that I should use MS Excel via a DDE data sheets - I tried this but it seems to corrupt the data so that the column that contains say '1 names' contains "price data", "address" line contains the data of 'comments', making the e-mail merge nonsense.

  If you use an alternative data source is CBO or something all NFL results (which wasn't shown on the worksheet) appear in the mail merge '0' both are unacceptable.

  Surely I'm not the only person to meet these challenges is the software never tested before being sold where is the help manual, I tried to use the online help but will not accept my product key.  All solutions provide the most basic assistance but my documents are fairly complex something computers should be good.  I lost most of today on this.  Sometimes I think it would be faster to type these longhand things than to use a Microsoft product.

  Hello

  Please check with the experts of the Office, Word and Excel here: (just repost your questions)

  Answers - Excel Forums
  http://answers.Microsoft.com/en-us/Office/ee861099.aspx

  Answers - Word Forums
  http://answers.Microsoft.com/en-us/Office/ee861096.aspx

  Answers - Office Forums
  http://answers.Microsoft.com/en-us/Office/default.aspx

  Or

  Discussions in Excel worksheet functions
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.worksheet.functions&lang=en&CR=us

  Discussions in Word Application errors
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.application.errors&lang=en&CR=us

  Discussions in Excel General questions
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.misc&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Discussions in microsoft.public.excel.worksheet.functions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Excel.worksheet.functions&cat=en_us_b5bae73e-d79d-4720-8866-0da784ce979c&lang=en&CR=us

  Discussions at the Microsoft.public.Excel
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Excel&cat=en_us_a09d72a4-715e-4c37-bcd5-75e0fc616b1f&lang=en&CR=us

  Microsoft.public.word.application.errors discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Word.application.errors&cat=en_us_f09268b3-8479-4cea-8037-d168d96833ac&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Several Documents and My Documents folders has HUGE MESS

  I'm having a similar, but perhaps more complicated problem. When I've implemented Windows 7 Pro, I accidentally created a user profile with a name that I didn't. I tried to correct it and I couldn't. Dell technical support allegedly solved the problem, but what they were really doing was to create a new library using the name I wanted. The profile of the user is always the same, but now I have several folders My Documents and who knows maybe how libraries with the same folders and I can't understand what are the default values. -Now when I think that I've updated a document and I'll come back, this isn't the one I've updated. There is no consistency, so some folders have updated files and other folders in the library even not. I need to synchronize sort each of them to have a Documents folder with all subfolders and files with the newer versions of the files. Sync Center tells me that my computer is unable to create partnerships and that my computer may not be compatible. I need to get this resolved so I can move to windows 8 with clean records and files, before the expiry of my offer to upgrade!

  See if that helps to shrink the locations of the files in question,.

  

• Why don't I have access to the files in the documents and settings, etc.. How can I change this?

  Original title: Documents & Settings

  I am the administrator of my new computers.  I just upgraded from XP to Windows 7.  Why don't I have access to all parts of my computer?  i.e. folders in documents and settings, etc.  How can I change this?

  I am the administrator of my new computers.  I just upgraded from XP to Windows 7.  Why don't I have access to all parts of my computer?  i.e. folders in documents and settings, etc.  How can I change this?

  Hello

  Since Windows XP, in the last several versions of Windows, there are many changes for the names and locations of some Windows system folders .

  To ensure compatibility with older programs, these older cases have been replaced by The junction Points. A junction Point is designed to redirect programs more alumni who are hard coded to look for the former name of folder for the new file name and the location in Windows.

  An example is the C:\Documents and Settings folder. The new name and the location of this folder is C:\Users. In Windows 8, you will see a folder C:\Documents and Settings , but it should be noted that this record contains a shortcut arrow on the folder icon. He identifies it as a junction.

  Junction points all than its guarantee of value everyone = access denied.

  Note: Do not attempt to modify the security settings on a junction. This can cause programs to stop work and possibly corrupt the file system.

  Let us know if you have any other questions.

  Concerning

• 'My Documents' and 'My pictures' merge into Windows 7

  I have Windows 7. When I open the "My Documents" library today, there are also the 'My pictures' library in there. When I tried to remove some of the files, they got deleted too in my library of "my pictures". Files do not "copy" on them, and the destination also said computer/photos then same as seen from the "My Documents". Please can you me how to return to the normal mode, so that only documents as contained in "My Documents" and not pictures too?

  Thank you!

  Hello

  If you don't want pictures to see in the document library, and then customize the document library settings. To do this, follow these steps.
  1. click on start, click on computer.
  2. right click on Documents under libraries, click Properties.
  3. on the Documents Properties window, you can include a folder or delete according to your requirement.

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• error code while trying to open the photos include JPEG and BMP files: C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!

  If you open a directory of photos and go to the thumbnail view in Explorer, they display the thumbnails correctly?
   
  I think that you need to reset the file association for programs that open the image files.  Try a right-click on a jpeg file and go to properties and click on the button to edit, and then designate PS elements 8 as the top program open with, and then see if it works very well.
   
  You can also check the settings in the registry for the types of image files.  Seewww.oehelp.com/noimg.aspx , which deals with a related issue.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!

• I've just backed up with an external hard drive for the first time, but my profile with my folders for photos, documents, and movies are not there

  Hello

  So, I finally got an external hard drive. I formatted for Mac (the device has been verified as being correct), and then he started to do a backup, which stated that a full backup would take 95GB. However, it only supported 19GB.  When I have my 'open' backup drive, I saw that only 'Macintosh HD' received support upward, not my user profile with all my folders containing documents, photos, movies, etc...

  I'm quite confused, because I thought that it would save.  I plan on Snow Leopard update to El Capitan, but if something is wrong or I don't like, I'm afraid that I won't be able to restore all my personal files - but only the applications that are on my Macintosh HD.

  Should I delete everything in my backup disk and try again?

  This is an image of what's inside my external hard drive:

  

  You have not indicated how you have saved, if you've used Time Machine then you do things the hard way and you'll find very difficult TM. Please use the Time Machine interface to locate your saved data. You can benefit from the research on:

  Use Time Machine to back up or restore your Mac - Apple, Support the section you want to find is the restoration section.

• I have 7 user folders in C:\Documents and Settings and a single user account. How can I assign the right folder to my account and get rid of the others?

  Recently I got a video card break down. Repair technology installed a new and created a new Documents and Settings folder, which is now using my user account. I don't want these settings, I want the 'old'.

  Please write the command NET USER (at a command prompt) and report the output of the command.

  To find out what profile folder the user uses the command DEFINE the USER.

  To get a list of all users and their profile folders use the script VBS here: shows all the SIDS of the user with the path to copy and paste the script (in the box) to a Notepad file and then save it with a .vbs extension and run it.

  Set up your computer so that it uses an automatic connection, and when you get to the login screen just enter the user name and password of the account you want to use, and you should still be able to open a session with him.  To change the automatic logon settings type control userpasswords2 in the box run from the start menu and select (put a check mark) the option "users must enter a user name and password...". ».  If you use the 'Welcome' screen, you can press Ctrl + Alt + Delete twice to get the login screen and you can then enter the user name and password.

  To remove an unwanted user account and its associated user files use the applet in the control panel user accounts, don't forget about your actions before you delete a user account and its files, it is a one-way street and destruction will be permanent.

  John

• How can I burn the documents and pictures to my CD/DVD combo drive

  I have a cd to format documents and some documents and saved pictures. They seem ready to burn, but I can understand how to burn them.  Windows Vista SP2. Power PC V311 Spec.

  I have a cd to format documents and some documents and saved pictures. They seem ready to burn, but I can understand how to burn them.  Windows Vista SP2. Power PC V311 Spec.

  ======================================
  Maybe the following articles provide some ideas
  How to burn a data CD. :

  Windows Vista - burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Windows Vista - burn a CD or DVD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  Personally, I find the useful free software DeepBurner:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  DeepBurner Free
  http://www.DeepBurner.com/index.php?r=download
  (Free DeepBurner 1.9 2.67 MB)
  (name of the file to download: DeepBurner1.exe)
  (Windows XP/Vista/7)

  The following link might be worth a visit:

  How to burn CD/DVD with Deep Burner
  http://www.ehow.com/how_4494548_burn-CDDVD-deep-burner.html

• I try to open Microsoft Outlook 207 - get repeatedly: C:\Documents and Settings\Admin\My Documents\Personal folders (2) .pst could not be found

  I try to open Microsoft Outlook 207 - get repeatedly: C:\Documents and Settings\Admin\My Documents\Personal folders (2) .pst could not be found

  Fix your broken Outlook personal folders (PST) file

  http://www.howtogeek.com/HOWTO/Microsoft-Office/fix-your-broken-Outlook-personal-folders-pst-file/

  I hope I could help

• How to merge multiple images into a single document and place them on the bottom

  I am trying to merge multiple images in a single document and arrange them on this document and save it.  Is it still possible?  There are five black and white drawings that I've resized at all have the same size.  Tutorials that I looked at, but it seems that everyone has another way to do this and all are very confusing.  Thanks for your help.

  It is not surprising that "everyone has a different way to do this." In Photoshop that is common. Try this:

  1. open a new file large enough to accommodate five drawings.

  2. open each design, click on it in the layers panel and drag and drop it in the layers panel to the new file.

  3. Repeat until all are in the new file

  4. use the move tool to reposition. (They are on separate layers)

  5 flatten the file if you wish (but save a version not flattened for future editing)

• How to convert merge documents and mailing for the docs individual pdf and each with a field record in the merge?

  How to convert merge documents and mailing for the docs individual pdf and each with a field record in the merge?

  What is an actual field or just a piece of static text somewhere? Whatever it is, you can't do this using the Split Document command. You will need to use a script custom read the value of this 'field' and use it during extraction of pages in the file.