Folio in the Viewer control

Similar Questions

• There is no such thing as a black line on the content of folio in the viewer adobe after update.

  Several days after an update of a shared folio in the viewer Adobe (iPad Retina), there is a black line on the content on the right side of the screen (possibly a the scroll bar that no scrolling). There was also a notification that an update was available (downloaded very quickly, no updates had been pushed in days). This line does not exist when you use the Office Viewer, non-retine iPad or iPhone.

  Please see other threads on the subject.

  It is currently under review

  This seems to be a problem with Content Viewer (v32.5) in the App Store.

  If I build one from the App 32.4.4 Constructor (same v32.5), the bar is in its original position.

  Not a solution, but could be a workaround for some until this problem is corrected.

• Generator of DPS: Disable the View controls

  When I built my application, I wanted to disable the display up and down controls (with the icon home, back button, table of contents...) because I have a clean navigation in my application menu. On the DPS generator (German language), I thought, he must be the field: "aktivieren Randzone, um die Folioansicht-Steuerelemente anzuzeigen. If I check this field.

  IPA - file on my iPad still shows the display controls when I tap on the screen. What I am doing wrong?

  This setting is satisfied, that is something else. You need to check the setting "Hide Navigation Bar in Folio top view".

  Neil

• How to upgrade a folio in the content viewer quickly?

  Hi all

  Thank you first for this great community - he helped us a lot!

  I wonder if theres just a possibility to update your folio in the Viewer application of updated content on the ipad - as I ve article in indesign, press update and if I click on Preview in the folio of indesign generator and it works very well, but only on the ipad, I have to wait at least 1 hour or something to get my folio any update.

  Thanks for your replies in advance.

  and I tried to close the content viewer application and reopen it again to see if the folio update then, but not

  In fact, it will update almost immediately (less than two minutes at most) and lets you know that an update of the folio is available. You will need to close and reopen Content Viewer.

  Now if you want to preview your content immediately without updating the article, use the Preview on characteristic unit in Indesign that will start the Preview on your Adobe Content Viewer.

  http://help.Adobe.com/en_US/digitalpubsuite/using/WS9293e1fb3b977c5c7b1f65ad12f28224932-7F f6.html #WS9293e1fb3b977c5c-625cb4491320399ddf5-8000

• Android native application on the viewer problem

  I have create a native android app. I have create my folio on 1280 x 800 and I also create the application.

  But I have a little problem on how my content appears on the display. When I saw my folio on the Viewer from the office all right but when I open it on the Viewer on the Tablet I have a problem on the appearance of texts. All the text looks as they have been somewhat distorted and the words cannot be read easily. Letters seems to be cut off on the edges. In order to understand what I mean I understand print 2 screens. The first is of the Office Viewer and the second of the viewer of my tablet. Please read the texts. To mention that on my previous experience with legacy app I never had this problem. Any suggestion on why this is happening and what can do to fix this?

  Thank you very much.

  

  Hello

  What device is on where it seems bad? When you use raster, if it gets scaled down, it will look like this. I would say if it's reduced raster switching text in PDF format.

  Kind regards

  Dave

• Features of limitations for the folios on the part of the Adobe viewer

  Hello

  The limitation on the use the same Adobe ID with the viewer Adobe for 25 devices start now? with V25. I didn t find these information in this link - What's new in this version

  Concerning

  __Felipe

  There is no limitation as such, but multiple connections do inetefere with your account performance. If you have a large number of pages in your account, it is advisable to avoid too many connections has a single application. So I would keep the low number of connections unless you have an ID specifically for sharing folios for several people to control.

• Can I change the values of the variables in the variables view control?

  I want to use the variables view control in Labview. I see only the values, but I can't change the values or create new Variables. Will there be a chance to do?
  I use Labview 8.6.1 and Teststand 4.1.1.

  You must activate the edit mode for the ApplicationMgr, by setting ApplicationMgr.IsEditor to true. Note that you must have at least the license of the custom editor for teststand so that it works (otherwise it will prompt the user to activate a license with these privileges).

  Hope this helps,

  -Doug

• is it safe to use a view control of sequence to display the sequence file both for execution

  I have a Teststand UI written in Labview 2012.  It has a single control of sequence, and I use the ConnectSequenceView method to switch between the display just the loading sequence file and the running.  Allow me to reiterate.  When a file sequence is running, the control is connected to the execution Manager.  Otherwise, it is connected to sequenceFileView Manager.

  I begin to suspect that I have questions related to this control, when I do the following.

  1. load a movie file

  2 run Single Pass

  3. the execution ends

  4. unloading and Release sequence file

  5 load a different sequence file

  6. run single-pass

  7 Labview crashes

  Am I missing a step?

  Thank you

  Kevin

  So it seems the crash of Labview, I mentioned in the original post is unrelated to the joint use of display of the sequence control.  However during my troubleshooting, I noticed that I was missing cut from a point of view of control stage before connecting the other view.

  And for the record, I think that there are many things wrong with the architecture used in the complete example, but there also many too many features for what to.  Just need a simple "press a button" and "run a test" for operators.  Everyone uses the sequence editor.

  All right.  Thanks for the comments.

  Kevin

• The hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view.

  The same thing happened to me recently: the hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view. Click on "Show common tasks in folder" but that doesn't change anything. Finally, I tried a restore without success point. No idea how to get back the link "control Panel Home"?

  Thank you very much for your support

  Alain Truchat

  Split from here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/left-hand-pane-on-Control-Panel-missing-XP-Home/6ca7e184-e2be-4709-b865-81e5c3702629#last

  Hi, Alan.

  Reset Control Panel-
   
  Press Windows key + R
   
  Type inetcpl.cpl regsvr32.exe/n/i
   
  Press ok

• Unable to scroll to a control in the view

  Hello

  I work with labWindows code that was written by someone else, a few years ago.

  I'm looking the uir file and you try to view the Timer controls.

  I've had trouble finding the Timer controls, so I made a find.

  When I do a find, I get the message "cannot scrolling for a control in the view.

  I worked on again/off again with LabWindows for some years.

  I've been away from him for probably 2 years, so I'm rusty in my thinking.

  I've never seen this error before.

  So, how would I go on moving the Timer controls so that they would not visible?

  Thank you for your help.

  After rejecting the «impossible...» "message (and dialogue following 'Find') just press SHIFT + F10, to allow you to directly edit the coordinates of the control. JR

• Install the ActiveX control required to view the site

  When I try to get updates from Windows Update site, ask me to install the ActiveX control required to view the site

  The instructions that I can install this active X do not work.

  How to ask a question:
  http://support.Microsoft.com/kb/555375

• Any ideas as to why unable to display the new folio in Content Viewer?

  The content viewer is a novelty and tools DPS (running InD CS6). Able to create folio with the generator of folio and view with the desktop but preview never shows up in the content viewer.

  Thanks in advance for any help.

  Thank you, Neil. Finally someone to Support Adobe's call me and understand the problem with a return to the screen. I can't tell you exactly what the problem was but they changed the suffix on some preference files and that seemed to do the trick. Thanks for the help.

• Why fields view object cannot display in the data control?

  Hello
  Work in jdev 11.1.2.3.0.
  I create two objects from view of the entities under the project module.
  and see the AppModule.xml as follows:
  ..
  < ViewUsage
  Name = "TransAccountVO1".
  ViewObjectName = "Project1. TransAccountVO "/ >"
  < ViewUsage
  Name = "TransAccountBillVO1".
  ViewObjectName = "Project1. TransAccountBillVO "/ >"
  ...
  Under the control of data panel shows these two nodes:
  -TransAccountVO1
  -id
  -name
  ---..
  + Operation
  + Named criteria
  
  -TransAccountBillVO1
  + operations
  + Named criteria,
  
  THE first node is ok, but the second miss (node TransaccountBillVO1) areas.
  Why fields view object cannot display in the data control?
  
  Thanks in advance.

  delete and Add again... the value editable forever.

• The data grid view control

  I want to show the number of records in the data on the web form.

  Dreamweave was similar or any data view data grid control abreast of controls to display the data?

  All conscious control of data in the text box or a label that I can link to the data source or I have to use my code to assign the value of my questions?

  Your information and your help is much appreciated,

  Kind regards

  Iccsi,

  At its core, DW is all just a text editor. All the available controls would be based on the server model you are using. I'm not at all familiar with CF, but I don't think he uses complex types "control". It is a scripting language and DW can generate scripts that can create a grid of output.

  There is usually not much CF knowledge in this forum. Specific questions about Cold Fusion could be better managed in the:

  forums.adobe.com/Community/ColdFusion/

• Empty the Viewer on iPad Test for multi folio iTunes free subscription

  Hello

  I'm currently testing a free subscription, multi folio kiosk app with refunds. However, the viewer opens without any folios - just the tiles of the subscription. I have triple checked the product Apple ID, shared secrets and that all appropriate certificates. I'm at my wit's end! A few questions:

  Should free subscriptions folios be public/free or retail? I read conflicting things.

  I'm a little unsure of the order in which I should publish folios in the producer of folio. This step proceed or follow creating the .ipa to test?

  As the name of the substance actual folios, as long as they are the same? I only need the ID of the product right even for iTunes Connect and App generator, correct?

  I noticed that after entering your shared secret there is a field to enter a url to iTunes in the administration tool. What url do we use? We enter this after the folio is public?

  Thank you!

  Darin

  A free subscription should be public/free, not retail.

  It does not matter what order you publish folios and create the .ipa to test. When you publish the folios as free and Public, they should appear in your app tests if (A) you specify the shared secret, (B) published folios like Public/Free, (C) set up your refunds/folios correctly and d specified free subscription Product ID created in iTunes Connect in the DPS App Builder.

  When you set up the formats for an app of the subscription, the values of name of slip, product ID, and Date of Publication must be the same for all partners and different formats for each set of "rendition". Specify the values of Date of Publication by choosing from the calendar picker.

  Yes, the iTunes URL becomes available when you publish the application.