Follow-up - what kind of data are followed?

Similar Questions

• What kind of ports are on the top a h8 - 1320t? None of them is a usb 3.0?

  What kind of ports are on the top a h8 - 1320t? None of them is a usb 3.0?

  Hello

  They are the two USB 3.0. You have also two USB 3.0 on the rear panel input-output.

  Jaco

• What kind of ports are

  I would like to put on a 5-in-1 adapter memory in this kind of port you please tell me what it is I'll have it circled in RED

  PS I hope I have as a result image size

  

  you have just provided a location but not the real image of these ports.

  The T61 can have a combination of location pcmcia/CardBus PCMCIA 5 in 1 + location pcmcia/cardbus or expresscard card reader, smart card reader + location pcmcia/cardbus.

• Instances of ticket OAM belongs to what kind of data?

  I'm in the planning phase of the OAM load balancing architecture. Most of the OAM components does not support the load balancing operation read/write of data policy and Configuration (between components OAM and LDAP).
  
  Through the above, here is my question. Instances of ticket OAM belongs to which category (User Configuration or political) OAM database? Can be considered type of Configuration data?

  Hi k,

  It's true - workflow OAM tickets are part of the configuration data.

  -Vinod

• can u please tell me what kind of drivers are use in gateway e4300

  I'm currently updating my windows xp and there is no sound

  Go here: http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=2648 and select your operating system from the drop-down list. It seems that you have a Realtek or a Creative audio chip. You can use something like SIW http://www.gtopala.com/siw-download.php about that. Scroll to SIW 2011 (build 1029) Multilanguage Home Edition.
  Once you determine which audio chipset you have, download the file from the bridge and install it.

  SC Tom

• Where can I find what kind of phone charges are compatible with the CMF?

  I've recently updated one of our CME to CME v10.0 systems

  I noticed that even if CMEv10 the Firmware support page shows how compatible phone for my 7911 phones is 9-2-1TH1-13,

  My 7911 running load phone 8-4-3-16 that all seem to be save and it works very well.

  So I must conclude that 7911 phone charging 8-4-3-16 is compatible with GCE v10.0

  Where can I go to find out what kind of phone charge versions are compatible with GUY or perhaps, at least, where I can find loads what kind of phone are no longer supported by a version of the CME?

  Hi Jared,

  Specific versions of CMF are tested with the versions listed on the doc "requirements" as you mentioned (linked below), but are not limited to these versions of firmware. The phone charges/firmware is completely independent of the CME/IOS version. And it is often appropriate to upgrade or downgrade the firmware of the phone on CME levels and is fully supported :)

   
  http://www.Cisco.com/en/us/docs/voice_ip_comm/cucme/requirements/guide/c...

  I would look at the upgrade of the firmware 8-4-3 for the 7911 BUT you need go to an intermediate version of the midpoint as 8-5-2 at first because of the "important notes" below;

  Questions for SCCP firmware update

  Note for all the firmware updates SCCP firmware version versions prior to 8.3 (3) for version 8.5 (3) or higher, you must first upgrade your firmware to version 8.5 (2). Once you have upgraded to version 8.5 (2), you can upgrade your IP phone to version 8.5 (3) or later.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cuipph/firmware/8_5_3/English/release/notes/7900_853.html#wp57602

  See you soon!

  Rob

• ORA-20001: APP-FND-02604: one or more of the following data are not valid

  Hello
  
  I use the fnd_user_pkg.addResp procedure to add the responsibility of self-service to a group of users with the script below:
  
  Start
  for e in loop (SELECT a domain NAME)
  -dbms_output.put_line (e.name); just to confirm the names are there
  fnd_user_pkg.addResp (e.name, 'BY', 'CBK_EMPLOYEE_DIRECT_ACCESS', 'STANDARD', 'CBK Employee Self Service', sysdate, null);
  end loop;
  end;
  */*
  
  
  eld table contains the names of users to add, in capital letters. When I try to run the script, it fails with the error:
  
  ERROR on line 1:
  ORA-20001: APP-FND-02604: one or more of the following data are not valid:
  APPLICATION_SHORT_NAME =, RESPONSIBILITY_KEY = CBK_EMPLOYEE_DIRECT_ACCESS,
  SECURITY_GROUP = STANDARD.
  ORA-06512: at the 'APPS '. APP_EXCEPTION", line 72
  ORA-06512: at the 'APPS '. FND_USER_PKG', line 2713
  ORA-06512: at line 4 level
  
  
  However when I run the procedure of inserting a single user at a time, it ends without error. A popular thought.
  
  Dula

  Hello

  User_id = this will come from the fnd_user table?

  Fix.

  responsibility_application_id and responsibility_id = this will be retrieved through a query joining the tables?

  You can find it in the FND_RESPONSIBILITY, FND_RESPONSIBILITY_TL tables... See the site for more details--> http://etrm.oracle.com eTRM

  Thank you
  Hussein

• What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images?

  What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images? Missing images are not on my computer, but when the document opens the images are there. I can copy and paste the INDD images in Illustrator. Y files/images/I am able to copy and paste the images that have been incorporated into the INDD file in AI of the INDD file? If this is not what type of image am I copy and paste? Can I take the images that I stuck in there and place them in a new INDD document and have the images to reproduce without problems?

  The images could be anything - check the links Panel.

  What you see (and copy) is just the screen preview, not the actual image data.

• I thought WWDC 2016 TEU June 13 at 10 am PDT. Some sites say that the event is from 13 to 17 June. What is the date on which they will announce if there are new products coming out. What is 13?

  I thought WWDC 2016 was just June 13 at 10 am PDT. Some sites say that the event is from 13 to 17 June. What is the date on which they will announce if there are new products coming out. What is 13?

  WWDC is the 13th week, not a single day. However, at 10:00 13 will be the speech. It's what you want to watch. You can download the application to your computer via: Developer Apple WWDC Watch - WWDC -. You can download the app for iPhone, iPad, or contact via the iTunes Store.

• What kind of Raw we are capture?

  Ask yourself what kind of Raw is saved from camera to recorder AXS - R5?

  Is the sensor-> exit process 14 bit AD converter?

  Y at - it a log curve applied before writing on storage cards?

  How much compression is applied before writing on storage cards?

  There will be an option for different levels of compression in the future firmware?

  Thank you

  Greg

  How do you derive 3.6:1?

  unless you know if it is 10, 12, 14 or 16 bit data and how it's packaged it is difficult to calculate.

  I too heard linear 16-bit uncompressed, but I don't know what that refers to, if it's the computer then converts the 12 bit raw which is encoded in a linear 16 bit newspaper.

• At what stage of the treatment we use a rule to update to apply logic to the way the data are updated in the database?

  Hello

  At what stage of treatment do you use a rule to update to apply logic to the way the data are updated in the database?

  Rahul

  Hello Rahul,

  Update the existing record or a data object

  Thank you

  edynamic expert Eloqua

• What ever the data that we are loading in HFM, how to check if the data are correct or not?

  Hello!

  This is SANDEEP, I loaded data using FDM in HFM. How to check if the data is correct or not, what ever the data I was responsible in HFM.

  Please tell me how to recover the data and what format, clearly can you me the data verification process step by step.

  It would be useful for me...

  Thanks in advance...

  Kind regards

  SANDEEP

  Hi Sandeep,

  I think the best way is to extract data from HFM for the same POV that you have loaded FDM and check if it is the same.

  If you then use HFM 11.1.2.x version

  1. login to the application and go to the menu Administration / extract / data.

  2. set the POV that you have loaded the data, then unzip it. You can open the file unzipped in a notebook

  3. you can compare the file with the data file generated by FDMEE under Outbox folder.

  But what would you give all the data corresponding to the POV that you set. So please ensure that you have the correct POV, defined according to the export FDMEE.

  Thank you

  Chandra

• When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

  When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

  This happens because there is no mask on adjustment and you have selected the Brush tool. You cannot paint on an adjustment. If the masks are not be created by default when you create the adjustment and you want that they be created, select mask add default option in the context menu of adjustments of the

• I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quic

  I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quickly. I'm on vacation and you want to read. Thanks for the quick response.

  Yes, actually I talk about digital editions. Do you know how to solve the problem, as stated in my first mail of Digital Editions? Thank you for your kind cooperation.

• Error: 0x8007000D: the data are incorrect on renaming a folder

  Hi, I am Nader... I have this problem recently when I come to rename a folder, it throws the error "error: 0x8007000D: these data are incorrect. Just at the moment where I click on try key it shows works. If it works, is a little annoying. Would appreciate some help here.

  NSK

  HI naderskhan,

  The problem occurs only with certain folders or all folders?

  Perform these steps and check if it solves the problem:

  Step 1:

  I suggest to create a new user account and check if it makes a difference.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it solves the problem, you can fix the damaged user profile.

  See this link:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Step 2:

  Perform a clean boot to verify if a third-party program or service is the cause of the problem.

  Refer to this article for more information:
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 of article.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.