Font book does not install

Similar Questions

• Font book does not start after new created smart folder

  Hey gang.

  I tried to create a smart folder in the last font book. As soon as I did, he started on me beach ball.

  Since then, it hangs at startup.

  I dropped the file. Any other suggestions?

  B /

  Did you restart the computer after you remove the .plist?

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite

• my mac book does not light and I get three beeps while it tries to start

  my mac book does not light and I get three beeps while it tries to start

  Three beeps is almost always a problem of memory RAM.

• Why is night launch does not install in Firefox 17, download site says it's compatible.

  launch of night does not install as anaddon in firefox 17 even though the download site says that it IS compatible.

  Hello

  What is NASA Night Launch? You can try checking the Firefox updates through software distribution Manager / Update Manager.

  If the problem persists, you can reset Firefox and leave with the launch of the night.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  If you want to take a list of Add-ons, changed the preferences/settings etc. to quickly reproduce the previous mode, please copy it to the Clipboard (to the left of the reset button) and paste in MS Office Excel, or OpenOffice/LibreOffice Calc or Notepad. However, it would be a good idea to check the existence of the number immediately after the reset.

• Satellite P50-B-103 - Cyberlink Powerdvd does not install the update from Toshiba

  So I have an update for my toshiba Satellite P50B-103 for "cyberlink powerdvd" and it does not install, just to unpack and does nothing.

  I left the laptop to operate for about an hour to see if anything installed but it does not, what to do?

  Are you talking about the video player updated v 6.1.2.1 - A available on the Toshiba UE driver page?

  It is an update and requires the Player preinstalled (full version).

  After downloading, you will need to unzip the package (vidpl-20140813100353)
  Then, in the vidpl-20140813100353 package, you will find the TC30704300A.exe file.
  It is also a zipped folder. Right click on TC30704300A.exe and extract the files.
  After that, you will get the TC30704300A containing various additional files where you can start the update process.

• Satellite 2420 - does not install Ethernet

  Installed Windows XP SP2, but the drive does not install ethernet.

  I use a card PCMCIA ENCORE ENPWI-B-RECA.

  Can't find my wireless network

  Hey,.

  > I use a PCMCIA ENCORE ENPWI-B-RECA.
  That means you are trying to install a WLAN PCMICA card or have I misunderstood something?

  Well, I doubt it is a Toshiba related issue and you should contact this PCMCIA card making.

  What you can do is to check the Device Manager if there are yellow exclamations points. Usually, the PCMCIA card must be properly and then you will find WLAN networks in range.

• Satellte C870 (PSC8EE) - display driver for Win8 does not install anything

  Hello

  I have a Satellite C870 bought in October last year.
  I have level of Windows 7 to Windows 8 a first time just before Christmas and has worked well.
  (A few small issues suchas as necessary before installing the display driver, but all Bios Update worked fine)

  A few days ago I had a system crash and the HARD drive died.
  Send the Sateite to replace HARD drive and came with Windows 7

  Has started the last installation of evening back to 8 64 window.
  But the display of the Toshiba site driver does not install anything? Catalyst still not...
  Just get the request to confirm if I want to install the product and then nothing...

  Tried the two drivers offered from the 19/02 and 26/02, but with the same result...
  Tried to install the driver directly from AMD announcement was a message my card was not supported
  I tried Windows 7 driver from Toshiba site for my machine and got the same message...

  Graphics card is an AMD 75610 M

  And of course I have admin access and also tried to run the installation in administrator mode files.
  And other drivers install normally (Lan Drivers, drivers Wifi, Tempro, mode eco etc.)

  Thanks for your help

  Hello

  The driver that you downloaded is a zip package.
  Unzip everything first.
  Then you will see a single .exe file in the unzipped folder.
  This exe file is also a package.
  Therefore, unzip the .exe file too.
  Right click on the exe file and select unpack here
  Now, you will have access to the files together. Now choose Setup.exe or Install.exe

• I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  You probably should have updated to 10.5.8 first.

  Installation or update of Snow Leopard:

  http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

• HP 7 G2 Dose does not install apps on SD card

  I recently that Got a HP HP TAB 7 G2 and it dose not allow me to install apps on SD card.

  I have read and found that Android 4.4.2 dose does not install apps on SD card on HP tabs.

  Y at - it another way I can do it, or I can hope an update or update Android 5.0 will allow me to do.

  I like to play games on the TAB and can install only 1 or 2 big games due to the lack of internal memory (4 GB).

  Any help would be greatly appreciated.

  Hey @ApoorvMishra ,

  Welcome to the HP Forums!

  I understand you are trying to install apps on your SD card instead of internal storage.

  Unfortunately, this is not a feature available on any Android device that does not have root access.

  There are methods available, but most require rooting the device, or by using the APKs HP could not support or encourage.

  Thank you.

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• Update KB961118 continually appears in my system tray, but does not install after that many try. How can I remove it. This has happened for a long time. Help

  Update KB961118 continoulsy appears in my system tray, but the update does not install. How to remove OR install. This has happened for a long time. Help

  KB961118 is an option, not the security update. Feel free to hide it & move on with your life. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• On Vista x 64 German language pack fails with code 2 - proposed patch does not install

  Hello!

  I tried to install on Vista Ultimate x 64 German language pack, but it failed with error code 2. The KB942903 hotfix for x 64 (also tried x 86) does not install with the message "this update does not apply to your system.

  I rebooted several times and tried to erase the directory SoftwareDistribution\downloads, no change.

  The log file is not really favourable, weird things only I see is:

  [...]
  KB94290303:04:16:578: CBS: language pack had error 800f081e. It has been deleted!
  [...]
  03:05:17:152: EC: CbsClient::Error(error=80092004,message="")
  [...]
  03:05:17:167: CBS: language pack had error 80092004. It has been deleted!

  Can someone help me out here?

  Thank you in advance!

  Stef.

  Hi StSz,

  1. What is the service pack installed on the computer?

  This problem occurs if a previous Windows Update process did not cause the computer to be in a corrupted state. This prevents the installation of any language pack.

  I suggest that you reset the Windows Update components and you try to install the pack of language, to check if it works.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  See also the Microsoft article and try the steps mentioned below.

  Full Windows Vista Edition language pack version information
  http://support.Microsoft.com/kb/925471

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Office Publisher KB980470 update does not install!

  KB980470 update does not install!

  Tried several times for 2 or 3 days...

  o here are the steps I took... which I think should work:

  (1) go to the Microsoft Download Center:http://www.microsoft.com/downloads/en/default.aspx
  (2) look for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB974234)
  3) click on the link for the download and then click on download and run. I think you have to accept an agreement, then click on continue or OK
  4) repeat for all downloads that you can not install
  (5) run Microsoft Update new and click search the updates and if updates have been installed successfully, they should no longer appear in the updates that must be installed.

  I don't know if it is not relevant or if it helped me succeed to install updates manually, but before I manually installed my updates I followed the instructions David_O posted under this threadhttp://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f3390e74-9961-4aae-8a05-554c1a9cf1a2?prof=required&lc=1033 . I suggest that first of all try to download manually by following my directions. If it does not, then it's a possibility instructions of David resolved an issue that allowed me to download them manually disable Microsoft downloads site.

  I can't believe all the research and the suggestions of the technicians did not work... sometimes your own research is the best!

  I hope this helps! Good luck!

  "I tried and it works!

• code KB9811433 646 and KB981715 does not install

  code KB9811433 646 and KB981715 does not install

  Sorry, you have problems getting your patches installed. I have a number of things for you to look at.  First of all, your Background Intelligent Transfer Services set to Automaticand started and Windows Update ? You can check these settings by typing services.msc in the search box of the start menu.

  Sometimes in order to get patches to install correctly, you must perform these tasks manually.

  (1) Download Center to visit Microsoft: http://www.microsoft.com/downloads/en/default.aspx.
  (2) search for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB979309).
  3) click on the link for the download and then click on download and run.  You must accept the agreement and then click on continue.
  (4) repeat this process for each download of updates Windows could not install.
  (5) to rerun the update from Microsoft, click find updates.  If all goes well, it will show that you are completely patched.

  If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or erase viruses can prevent the installation of patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and then Quick scan (full scan takes a long time to complete). Try the patches.

  Barbara

• Windows Update does not install SP3 on Windows XP Pro computers

  I have about 400 computers running Windows XP SP2 withIE 6.  It is set to automatic updates on installed every day at 03:00.  For some reason, SP3 is installed automatically never.  If I run the windows update manaully, it offers me to install SP3.  Is it normal?

  SP3 does not install automatically. It's like IE8.

  Perhaps this may also be of interest:

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  TaurArian [MVP] 2005-2010 - Update Services