@font-face can read fonts of your file system or a jar?

Similar Questions

• How can I change the NTFS file system to say fat so my TV will read the HD Ext USB files? Thank you

  Using Vista, downloaded a movie on 2GB USB flash drive and Iomega 1 TB HARD drive then strove to connect both in TV Grundig.

  Read file ok but wouldn't play film "says cannot read the file format" all clues please? For your info I have 63 years if my grandson was here 6 years old it would probably sort fast time, but I can't! :)

  Hi Norman,

  After you convert a partition to NTFS (New Technology File System), you can not convert back. If you want to use the FAT (File Allocation table) file system on the partition again, you will need to reformat the partition, and this will erase all data on it.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows-Vista/convert-a-hard-disk-or-partition-to-NTFS-format

  Good day!

  Answer please if you face concerns.

• How can I specify who can read my downloaded FolderLink file? (Box)

  I have downloaded a jpg file in box following your instructions, but was surprised that I got the opportunity to choose which users can retrieve the stored jpg. The instructions in the box before you actually download anything refer to choose a
  recipient 'swap', but no option appeared in my record and download. Which is the selection of who can read this jpg file is no longer available in the box?
  Thank you, Ralph M. Deal, new FolderLink and a shared file photo frequent.

  How will box or any other provider who the people are. They do need an account with this provider to see the mail. That's the whole purpose. Anyone with the URL can open it. But only those with the URL, there no process to go through. (security by obscurity)

  Now before you start safety, be aware that your jpg if attached to an e-mail slide all over the internet, so it was getting delivered to plain text, still no required password and certainly no encryption.

• ESX can read a twoGbMaxExtentFlat VMDK file

  Is there anyway that you can convert a twoGbMaxExtentFlat VMDK file in the type of VMFS.

  We cannot read twoGbMaxExtentFlat in our current version of the Client Infrastructure.

  Hello

  Is there anyway that you can convert a twoGbMaxExtentFlat VMDK file in the type of VMFS.

  Yes, use vmware converter or use vmkfstools, the format that you have is called 2gbsparse.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• How can I migrate content from file system to webcenter content using inbound refinery?

  Hello

  How can I move content 'Webcenter content' using Refinery Inboundfile system? There is a lot of content in my system, I want to go to "Content Server" using inbound refinery.

  How can I reach it? Is it possible to do this? If this is not possible using inbound refinery, so how can I do this?

  I use 11.1.1.6 version.

  Help, please.

  Concerning

  REDA

  Hi reda,.

  First - incoming refinery isn't real resources whose content is ingested in the content server. 'S done it by Webcenter Content server that holds / process of all content items.

  IBR is only used for the conversion of 1 format to PDF documents (and some others).

  So, in your case, you must first set up a content server and then install Desktop Integration Suite customer on your physical machine. In this place, you can drag-and - drop all the content of the file system to the content server.

  Links to this documentation are available from the following links:

  Content of the WC: http://docs.oracle.com/cd/E28280_01/doc.1111/e26692/toc.htm

  Desktop Integration Suite: http://docs.oracle.com/cd/E28280_01/doc.1111/e10624/toc.htm

  Please go through the documentation first to get those basic concepts allowed.

  Thank you

  Srinath

• Mode of read only on all file systems

  After the failure of one of the hard drives in RAID 1, all file systems have passed in read-only mode.

  Drive replaced, has spent a regeneration, but the system files are always in read-only mode.

  Management Service fails with the error "/ var/lock...» "is in read-only mode.

  How to convert filesystems in read / write without system restart?

  ESX 3.5 update 4

  Use this command:

  Mount o o ro remount.

  fsck-f/dev/XXXX

  where XXXX is the / device (you can see the name of df)

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• VI Analyzer "a few screws and/or essays have been added or removed from your file system because you have saved changed this configuration file."

  When I run VI analyzer and open our standard configuration file, the message "some screws and/or essays have been added or removed from your file since changed record system this file of configuration." appears. By clicking OK, choose something to analyze and move to the VI Analyzer - select the Tests, the selection of testing control dialog box is completely empty and the Analyze button is grayed out.

  I'm runing LabVIEW 2013 on Windows 7, VI Analyzer worked before and I tried repairing and uninstalling the LabVIEW program (then reinstalling) already. If I do not select a config file or try to reset all the test configurations, control of the Tests remains empty.

  Is it possible to restore the tests or difficulty just the VI Analyzer toolkit?

  The only thing I remember to change since I ran last parser is that I installed the tiara.

  Most likely someone accidentally moved the test record THROUGH by accident

  VIA installs like a Toolbox and would not repair with just a LabVIEW installation

  You could re - install Media Developer Suite if you have that in the opposite case:

  Or the other

  Change > getting started window or

  Tools > find a LabVIEW Addons

  will launch the search VIPM tool

  Search for VI Analyzer

  Download and install

• If you have a valid Windows Vista license, why are there not support which includes downloads of the files we can need to overwrite your file should are corrupted due to a virus or malware?

  I am an unlucky recipient of a laptop with Windows Vista. It came preloaded with Vista... no backup disks or manuals, etc. The restore feature was not turned on, so a restore point has not been set. My WMP will not play wmv or any wmp files. I also have problems with my automatic updates in Windows. I have 10 updates that were not successful, but there are probably pages of the attempts of many times where the updates failed. My Trend Micro Titanium Internet tells me I have a problem in my directory root, which is probably due to an update of Windows that was supposed to protect me from a weakness in Vista, but again once with my updates failed to download successfully, its possible the fix I need is still sitting there... I think it's a shame that MicroSoft is allowed to 'SELL' a product without disk... just a license # and NO manuals. AND not a lot of support for your money... or the other. I spent hours and hours trying to fix myself... using all the resources I can find... look like a dummy, I'm sure, but if I had the software I probably would have deleted from my hard drive and more. It would certainly have saved me MONTHS of frustration. Trend Micro and real human support downloaded the plus version of their software for me and recent, plus a few extras to eradicate certain other pests. To get a human being to help you at MicroSoft? It will be $60, please... Sorry, if I look a little tired, but you guys are supposed to be the best and I feel fuzzy. I have been in sales for a long time. long time AND sold the BEST AMERICAN made cars... CADILLACS, but you know if I take care of my clients after the sale... they would have felt like I do, today... disappointed. If every time they came into the dealership I have loaded the $$ to take care of them, they don't come back to me when the NEW models came out... I made sure they got their cars back washed... and they sent their friends to buy from me. And ILS never thought to buy from anyone else, actually when I left the company, I had a nice little legacy of clients in order to let my protégé.

  Thanks (again) Darin - especially for such a detailed response.

  Looks like you're in the clear, Phyllis :)

• How can read/write on a file and stored in the internal memory of the device, 10 BlackBerry?

  I want to store a string value of my request. After that, I remove my device app & reinstall my app. I want to get the previous value stored in recently installed application.

  I think that if I can write the value to a file that is located in the internal memory of the device. After that, I read the value of this file in any time. I am new to the cascade of Blackberry, so I don't know how to write / read a file.

  Please help me...

  Thanks in advance.

  Hi all

  I solved my problem. I'm using the code below:

  QString call: readFromFile()
  {
  QFile textfile("shared/documents/Test.txt");
  QString str ="";
  If (textfile.open(QIODevice::ReadOnly |) QIODevice::Text))
  {
  QTextStream in(&textfile);

  Str = in.readAll ();
  }
  else {}
  QTextStream out (stdout);
  off<>
  }

  TextFile.Close ();

  return str;
  }

  Thank you all for the valuable suggestion...

• Is there a 64 bit microsoft program that can read .pdf (portable document files) files?

  I saved a file in Word format to PDF. When I tried to open the file, opened it with characters, I don't understand.

  My operating system is Windows 7 Home Premium. Y at - it than a program for pdf files available for my operating system?

  How much does it cost?

  It's freeware and a good PDF reader.
   
  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/

• I just spent two hours on a chat session with Adobe - unresolved - problem, I accidentally uninstalled my Adobe program and I need to install it again so that I can read all my PDF files on my computer.  Can you help me quickly?

  I have a subscription to Adobe PDF of annual export.  I need to download this Adobe software yet.

  Hi josephm.

  You can access ExportPDF directly from the web https://cloud.acrobat.com/exportpdf. But, if you would rather access for Adobe Reader, you can download the reader of this site: https://get.adobe.com/reader.

  Please let us know how it goes.

  Best,
  Sara

• In my Windows xp, neither WMP nor IE 8 can read mts files

  In my Windows xp home edition, Windws Media Player or Internet Explorer 8 can read the mts (HD file with extension mts) files. How can I solve the problem?

  Thanks in advance

  Jangaly

  There is a small chance that you could play the file if you
  Rename .mts in .mpg.

  Also... the freeware VLC Media player may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• I can not open. MYT files

  I tried to open a. Windows and the file MYT says that it cannot open it.

  Vista doesn't have a file association for that file type.  You must add a program that is capable of reading/opening/with the help of this file type.

  This file extension. MVT is associated with MyTraffic X AI Aircraft Traffic Database File (BK & simMarket.com). MYT file type is primarily associated with 'MyTraffic X' by BK & simMarket.com. MyTraffic X works with Microsoft Flight Simulator X. By design, it is built to support the latest FSX has to offer, as gateways of mooring to the aircraft or baggage carts and vehicles maintenance.  Here is more information on MyTraffic, including a current verrsion of the program it says is compatible with Vista: http://secure.simmarket.com/b.-renk-mytraffic-x-pro.phtml.  You need a program that is installed on your system that can read this type of file - such as those mentioned above and perhaps others (although I can't find information on it).

  Where do you have it?  Ask the source what program created the file and what program can be used to read the file.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Help! How can I call the Matlab file with toolbox (matlab 7.1) in labview 8.6?

  Hello

  I developed a file matlab to optimize a system, it's Toolbox. Entries should be in Labview but also the outputs should be included in the labview graph.  The results include arrays. CVI is not installed. My labview is version 8.6. MATLAB is version 7.1.

  (1) is the version of labview and matlab questions in this problem?

  (2) what is the best solution? Matlab script? DLL? Active X?

  (3) if I could use matlab script, I define the type of each variables in labview, including those of the code?

  Thank you!

  Jessie

  Step 1: Learn patience. This forum provides no immediate technical assistance. It is composed mainly of volunteers, and most of us have full-time jobs.

  (1) is the version of labview and matlab questions in this problem?

  Not really.

  (2) what is the best solution? Matlab script? DLL? Active X?

  Any of these will work. If you want to use the script, then you must use the Matlab Script node. This allows you to enter the Matlab code directly in the node, or you can call scripts that you have on your file system. This method requires that you have MATLAB hand whole on the target computer. If you create a DLL Matlab, then you use the node library function call and call the DLL as any other DLL. This method simply requires that you have the Matlab Runtime on the target computer.  I assume when you say that you're referring to writing your own ActiveX ActiveX component?

  (3) if I could use matlab script, I define the type of each variables in labview, including those of the code?

  I don't know what you mean by defining each variable type. You need to create the entries and exits on the Script node Matlab, so you can pass data between LabVIEW and Matlab environment. The help of LabVIEW contains more information on the use of the Matlab Script node. There are also some examples with LabVIEW.

• Windows didn't start because the following file is missing or corrupt: __\WINDOWS\SYSTEM32\CONFIG\SYSTEM___YOU CAN ATTEMPT to REPAIR THIS FILE BY STARTING WINDOWS SETUP using THE ORIGINAL SETUP CD - ROM__SELECT 'r' in the first screen to start repair

  This problem is on my laptop and I can not further only the screen with the above opinion.  I don't have the original disc, since I received the laptop of my mother when she could no longer remember how to use it. I need a repair of xp, or all that it can be called and information how to fix this problem is driving nuts me to have a laptop that is faulty... Please help me.

  This problem happens almost daily.

  You can search the forums for discussions with similar problems (or the same problem) and peruse the threads where the result is a happy ending and examine everything first using these methods.  This will reduce the time to resolution and frustration.

  Something like this example:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/83d5c57f-9836-4f3a-bec8-04c7d81861d3/

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!