I can not open. MYT files

Similar Questions

• In Windows Mail, I can not open .doc files, I get the error that it was not bound

  In Windows Mail, I can not open .doc files, I get the error that it is not associated, and he tries to search in appdata/IE5 for a reason any.  PDF, PPT, XLS all work fine.  I tried unassoc to unassociate file types for .doc and .docx associate then again these via Control Panel and it STILL does not work.  I'm at the end of my home please help.
  Nicki

  I had to remove the regedit.  for some reason the mail windows refuses to unassociate so go to regedit, I don't like playing with regedit, but it worked, I deleted and then again, all ok now.

  Thanks for the help!

• Error "Internet explorer can not open this file or this page.

  __2-so I'm working, suddenly the following problem crosses my path. Told me that "Internet explorer can not open this file or this page. I followed the instructions but nothing happens so I leave and continue on another topic.

  1. when I see "your password is wrong", I'm always sure that this is right PW, so I click OK and it's immediately back 2 or 3 times until I close it and after that I continue to work as if nothing had happened.

  2 - while I'm working I tells me that "knowledge cannot open this page or IIR. I followed the Instructions but nothing happens. So I leave and continue my work on another of the subjects.

  "So I leave and continue my work on other topics.

  You don't say exactly what you are working on.

  Thus, the advice given is for Internet Explorer.

  See if the information below helps you solve the problem/s you have with Internet Explorer:

  http://support.Microsoft.com/default.aspx/KB/936213/?p=1

  "How to optimize Internet Explorer"

  Configuration in Windows Internet Explorer 7 and Windows Internet Explorer 8 settings can cause one or more of the following problems:

  ·    You experience performance issues in Internet Explorer.

  ·    You receive an error message in Internet Explorer. For example, you receive a message error "Internet Explorer cannot display the webpage".

  ·    Internet Explorer stops responding.

  This article describes how optimize or reset Internet Explorer in Windows Vista to solve these problems.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936215

  "How to solve the problems of Internet Explorer in Windows Vista and Windows XP"

  This article explains how to solve any problems that you may experience when you use Windows Internet Explorer 7 or Windows Internet Explorer 8 on a computer that is running Windows Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936214/

  "How to solve compatibility problems that affect Internet Explorer 7 in Windows Vista"

  This article describes how to troubleshoot software compatibility affecting Windows Internet Explorer 7. To help determine which program may be the cause of the problem, you can do the following:

  1 use the mode safe mode with networking

  2. perform a clean boot

  3. use another user account

  4 scan your computer against viruses and spyware

  5. run Internet Explorer 7 in "no Add-ons" mode

  Hope the above helps.

  ·                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also try the Forum from IE:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  See you soon

  Mick Murphy - Microsoft partner

• It can not open PDF files in IE 7 or IE 8.

  It can not open PDF files in IE 7 or IE 8. I have to use firefox. This just started last week. Whenever I try to open a pdf file, IE freezes and no response.

  Are you running IE 7 and IE - 8 on the same computer?  If so, how?

  Uninstall and re - install Adobe Reader should fix.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I have photoshop CS4 and I can not open RAW files. Error message: could not complete your request because of a program error.

  I have photoshop CS4 and I can not open RAW files. Error message: could not complete your request because of a program error.

  Hijimm

  Please make sure that you have the correct version of Camera raw installed and that you use a camera supported supported by Camera Raw devices check the raw version of camera you have help > on Photoshop(Photoshop>>About Photoshop on MAC)

  Check by using Updates.Select > updates (from bar of menus in Photoshop)

  Or manually install here Adobe - Photoshop: for Macintosh: Adobe Photoshop CS4 11.0.2 update - multiple languages

  Adobe - Photoshop: For Windows: Adobe Photoshop CS4 11.0.2 update - multiple languages

  You can check this thread for the other Possible solution

  Also move this thread of Discussion General bridge in Photoshop General Discussion

  Concerning

  ~ Assani

• FRM-10043 can not open the file under LINUX

  FRM-10043: could not open the file.
  I created a form correctly in windows. It works very well.
  Now, I have to use it under LINUX. Then I copied the fmb file in Linux
  where the default test.fmx is placed.
  
  Now, I've run the sub query and got the result can not open the file.
  
  
  [orabif@br bin] $ sh frmcmp_batch.sh userid=CNT/CNT@cmt
  compile_all = Yes module_type = form module = logonfile.fmb
  
  
  10.1 forms (form of the compiler) Version 10.1.2.0.2 (Production)
  
  10.1 forms (form compiler): Release-Production
  Copyright (c) 1982, 2005, Oracle.
  All rights reserved.
  
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  PL/SQL Version 10.1.0.4.2 (Production)
  Oracle V10.1.2.0.2 - Production procedure generator
  Oracle 10.1.2.0.0 graphic virtual system Version (Production)
  Oracle Multimedia Version 10.1.2.0.2 (Production)
  Oracle tools integration Version 10.1.2.0.2 (Production)
  Common tools Oracle area Version 10.1.2.0.2
  Oracle 10.1.0.4.0 Production CORE
  
  FRM-10043: could not open the file.
  
  Form not created
  
  
  Please help me solve this problem.
  
  * I know that there is no need to compile OLB files. but my forms display error that
  FRM-18108 has no dependent objects.
  
  When I use Frmcmp.sh GUI is the compiled form succesffully if there is no OLB attached with it.
  It gives Fr-18108 when OLB is attached with the form that he
  
  Timely help is needed...
  
  Thanks in advance...
  
  with cheers
  Sprity...

  spirty,
  This sounds like it could also be a permissions problem. I'm guessing that when you copy-n-Paste the form on the LINUX Server, you did what Windows Explorer. When they are copied to the server LINUX file will be created with the default privileges defined on the file. I recommend that you connect to the LINUX Server and check the permissions on the file. If your file permissions do not match the permissions of the text.fmb (or other files .fmb you have there) I suggest that you change the permissions so that they match.

  I hope this helps.
  Craig...

  If my response or response from another person was helpful, please mark accordingly

• I can not open zip files!

  I had this problem since day 1.  Whenever I get a zip file, Vista will not open the file instead, he associated with Internet Explorer and sends the computer into a loop of windows which can only be stopped by stopping turn signals.  If I associate the file with any other program, it opens not and goves me a message that the content is unreadable.  I do not get an option to "extract files".

  Help!

  Bschum

  Go to: http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to the ZIP entry and click or double-click on it to launch the association of Zip files repair.  Then restart.  Zip files should now behave as usual.  You will still be able to use 7 - Zip instead of Vista if that is your choice.  All you have to do is change the file association by default for the ZIP files to 7-ZIP inntead of Vista.

  If you have this problem withall the speed of your program, Diecut for entry EXE click or double-ICCT top to run the EXE file association repair.  This should solve the problem of all programs to open under internet explore (if that is the case - I'm not sure I quite understand your situation).

  If the programs are open OK but the problem is that all the icons are all the internet Explorer icons, then perform a rebuild of the cache icon as follows:http://www.vistax64.com/tutorials/117229-icon-cache-rebuild.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Easy transfer gets "Can not open the file" after update from XP to 7

  In Windows XP Sp3, I created the Windows Easy Transfer file on a USB - I see it. I did the Custom installation of Windows 7 that seems successful. When I try to access my data using file transfer, the program will not open the file, although he sees there. Is there a way to retrieve this file?
  I saw similar posts but have not found one with an answer yet.
  Thank you

  Agrivated after myself, I found the problem.  And it's simple!  I hope it works for everyone, always in need of response.  So I upgraded to Win Xp 32 bit to 7 64 bit.  I had a 39 + GB Easy Transfer file.  I was getting the same error, «...» "Cannot open a file... "Well, to solve this problem, I opened the Transfer Wizard, thenm go through your files, using the options"Advanced"and my limited to a size of transfer to 2 GB or less.  It could be a tedious job, but it should work for you, as it did for me.  You can experiment a bit more with the measures, but I've just stuck with 2 GB and was fine.  Good luck to you all

• I can not open raw files three of Adobe Camera Raw to Nik Efex

  Something strange happening never happened before.  I used to be on CS6 but now am on CC with the latest Adobe Camera Raw.  I used to be able to select three photos in camera raw, then click on tools and then I see my Nik Efex plugins and pick the one I wanted.  But I see now is Photoshop under tools at the bottom as an available option to open files.

  How can I open three files in HDR Efex Nik of Camera Raw?  Is there something wrong here or am I just not doing things right.  It seems that I did this before and now I can't.

  It should be listed under Google, because they bought Nik.

• UAC problem - I can not open all files or do anything that requires user account control

  Hi, I have a very annoying problem. I did something to my laptop (which is come with Windows Vista, by the way) and now I can't open any files or do something that requires UAC. When it arises, he asked an administrative password and there is no box or anything for the password and it won't let you click on 'OK '. I'm very confused and I hope someone can answer my question as soon as POSSIBLE. Thank you.

  -Gameslaya99

  Hello Gameslaya99,

  I try to try and return your operating system to the last known good configuration.  I have included the link below with the steps.  Please let us know status.

  Using the last good known Configuration:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Thank you

• Can not open the file

  Hello, after I did a clean reinstall of Win xp Pro, I have a Moose file under my documents that I can't open.

  The file was created on 26/07/2010, when I try to open it, I get the message "Access denied" and it can be write-protected. The file was not encrypted when originally made.

  I also tried dragging it to a shared folder, but the same message.

  How to access this file, perhaps using DOS commands?

  V/r

  Paul

  BZ to you too and thanks for the comments.

• copy my files and once completed they were in zip files, now I can not open zip files, I use vista bussiness... Thank you.

  make backup of my files aand ordibary copy in zip files, they now need to open and I get message cannot open files, etc.

  You must use the restore backup procedure to restore individual files of access - you can not access it just directly from the backup (even if it's possible with 3rd party software - you can check Bing, Google,www.tucows.com and www.download.com).  If you made a backup of the complete picture, you should definitely 3rd party software even be able to do as you cannot access the individual with restore files (only if doing a restore completes).

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup)...

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry smartphones can not open .doc files transferred on my BB Curve 8520

  I am a new user and just bought a BB Curve 8520. Carrier is Virgin Media; Operating system is V4.6.1.314 (Platform 4.2.0.135); Desktop Manager Version is 5.0.1.2.8

  I transferred photos, music and a few documents from my PC to my BB using Desktop Manager successfully. However some .doc files transfer, but I can't open them on the BB. I get an error message indicating that a file cannot be opened because it is an RTF file. I also noticed that when I start to transfer the files, the small window that opens does not me the possibility to convert - it is grayed out. Help please - I am totally new to Blackberry and not an ACE! Thanks in advance!

  You must save the files as real documents Word on your PC first.

  WordToGo on your BlackBerry will open MS Word documents.

• My colleagues can not open my files XD. 'Document type not valid.' error.

  I get an error similar to https://forums.adobe.com/message/8612177 , except that it is not serious what I name it or put the file, it works fine for me. The problem is that colleagues regularly get this error trying to open the files that I hit. We all have all the updates, uninstalled and reinstalled, the works. My colleague even sent me a file XD which worked well for him, and then I opened, brought no change, saved and sent again and it no longer works. What's still happening?

  Thank you!

  

  What version of Adobe XD you have, and what version of Adobe XD your collaborator were they?  If you are still on version "Preview 3", you can see this error message when you try to open a file created in the most recent version "Preview 4".  (In the future, you will see a clearer error message in this situation).

  If you are on an older version, I encourage you to upgrade to extract 4 - which was released a week ago – and see if that helps.

  If this isn't the case, please let us know and we can try to dig what else might happen.

• FixIt can not open PDF files

  I can't open PDFs in Firefox - I get a gray screen stating "this plugin is vulnerable and needs to be updated". I go to updates for Fixit and the link takes me to things that I don't understand. I've been using Foxit Reader and this is my default player. I have no problem with Internet Explorer it works very well, it's just with Firefox which I prefer by far apart from this problem.
  I changed FixIt as my AVG Free software was telling me there is a problem with Adobe Reader XI (11.0.01) and so I got feed with it I deleted Adobe from my computer
  I had several suggestions to support Foxit, but nothing seems to work.
  I have reset Firefox by default given parameters always get the same message.
  Help, please

  Hi - Thanks for that - I just did a reinstall of Fixit as you mentioned, and the problem is always the same.
  I want to emphasize that I had five support proposals Fixit (yours being a) that I made and still the same problem. They're still trying to get out.
  I checked the internet and it seems I'm not the only one, but nobody seems to have the answer. Which makes me wonder if it could be a setting on the computer. But then why is there a problem with IE.

• I can not open Jpeg files or ppsx. I can open xls and PowerPoint 97. How can I open the ones I can't?

  The question is in the title.

  Hi AndrewNordemann,

  1. you receive an error message when you open jpeg or ppsx files?

  2 do you have Microsoft Outlook 2007 or 2010 is installed on your computer?

  3. were you able to open these files as soon as possible?

  You will need Microsoft Outlook 2007 or 2010 to open ppsx files.

  You can open ppsx files using Microsoft Office PowerPoint 2007 Viewer:

  PowerPoint 2007 Viewer

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.