fonts will not stay

Similar Questions

• Windows Vista SP2 fails to install and Windows Firewall will not stay

  Hello, I have problems with Vista 64-bit, it will not install service pack 2 and Windows Firewall will not stay. I tried to manually enable ICF manually and it won't turn. It gave me error 6x9D. I ran several antivirus scans malware byte and pc cleaner pro 2012 and the issue has not been resolved. If I could get help would be much appreciated. Thank you

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You have not installed SP1?

  If so, try a direct download of SP2.

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• FreeCell card will not stay up

  When I play freecell, that my card will not stay up in the third blockit falls in can help you

  Hello

  -What version of Windows is installed on your computer?

  If you use Windows 7, follow the steps mentioned below and get back to us with the results.

  Uninstall and reinstall the game.

  a. Click Start, in the start search box type "appwiz.cpl" and press ENTER.

  b. click on turn Windows features on or off.

  c. clear the check mark before the games.

  d. click OK.

  e. restart the computer.

  f. re - turn on the device by placing a check mark before the games.

  g. restart the computer and check if the games to launch successfully.

  Reference:

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I hope that helps!

• My screen saver is set on various photos & first, they light up but they will not stay running

  Original title: screen saver

  My screen saver is set on various photos & first, they light up but they will not stay running, the screen goes black & I do not turn off my computer. I want pictures to be constinltly running.

  Hi mel merrill,.

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you receive an error message?

  4. do the computer in sleep mode?

  Method 1

  See the link below and run them the fixit tool available, check if it works.

  Windows Photo and slideshow problems

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2

  If the previous step fails, then you need download and install the updated drivers for the graphics card on the computer by visiting the manufacturer's Web site.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black vista Windows 2009! system will not stay running...

  my windows system will not stay running and shuts down my computer after maybe running for 10-15 minutes... says also download 3 of 3, but instead of blocking it loads windows and then I have no sound what either.  also used windows open sometimes it always ask if I want to run windows normally know, my computer was repaired and when I came back started all this junk, please if someone can help me send me an email to * address email is removed from the privacy *. and thank you for your help.  Oh yes, it keeps asking me for my windows vista black 2009 key that I do not have...

  Black of Vista is NOT supported by Microsoft.

  Go to where you downloaded from / got fix for support.

  Mick Murphy - Microsoft partner

• Removable shelf guard reset itself! Will not stay! Help!

  Hello

  I have a HP eStation 510a and the detachable tablet will not stay long enough to do something with it. As soon as it turns on it immediately turns off and then turns back on. I followed the steps to do a factory reset on it and successfully completed, but it still does the same thing. The printer itself works fine, it's just the tablet which is defective.

  Thanks for any help you can give me. It's driving me crazy!

  Hi mrsjermain,

  Welcome to the HP Support forums.  I understand that your the C510a zineb will not hold a charge long enough to turn on the Zeen.

  I have included a document troubleshooting when you have problems with the Zeen.

  The eStation, HP Zeen is Unresponsive, Blank or does not turn on

• date and time clock will not stay set gose back to 1999

  time, back gose to 1999 after I have so far for 2012 will not stay this is why?

  I posted when there is no answer here, so I don't think mine is a double post.

• my logo will not stay in the corner

  In the Loo Loo model will not stay my logo in the upper left corner.  When it is in the design phase, it is there, but when I saw it, he puts it as close to the middle in the middle of my background image.  Any advice?

  Hello

  Please make sure that logo is pinned at the top of the page to the left as shown in the screenshot below.

  

  Concerning

  Vivek

• Creative cloud, fonts will not open, wheels of progress turn continuously

  Creative cloud, fonts will not open, wheels of progress turn continuously. I've just updated to the latest version of cloud. I tried to uninstall CS4 and CS5, but I still use CS6. Need help, please I need to be able to use the TypeKit from Adobe.

  Hi Carmen,.

  Please check the help below document:

  https://helpx.Adobe.com/creative-cloud/KB/files-Panel-spinner.html

  Kind regards

  Sheena

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Windows 7 taskbar will not stay on top or will not display

  Windows 7 Pro 64-bit, Dell d830, core2duo t7300, 4 GB RAM

  Windows taskbar settings currently exist:
  Lock taskbar - disabled
  Auto-Hide - verified
  Use small icons - verified
  Location of the taskbar - low
  The taskbar buttons - combine when full
  AeroPeek - verified
  Taskbar won't stay on top of all other windows. In other words, after it autohides, it will not display. I can't say that because I'm not... So it will not display or is display but under other windows. I guess it is less, because when I reduce all windows, it reveals very well by putting the mouse at the bottom of the screen.
  Unchecking / checking options above several times does not change the behavior
  I noticed in contrast to all other versions of windows, stay of the taskbar at the top of the page option has been removed from Windows 7. way to go Microsoft.

  Delete content in C:\Windows\Prefetch. Taskbar "reveals" again.

• HP Office Jet 7612: lid will not stay in position trying to place a document on the scanning of glass plate.

  The top cover does not stay in place, trying to place a document on the scanning of glass plate.

  If not held with a hand he's going to slam closed.

  Y at - there a setting to make the lid to stay until my document is placed to be analyzed.

  I'm not placing books or strange shaped items on the plate scanning, only flat documents.

  If we're not careful the cover (which is heavy) will be slam down and hit someone's fingers or hand if not aware of this problem

  HP notified, they informed me that they would send me a replacement printer. The springs in the upper lid has failed or missing. Even if it took 2 phone calls and more than 2 hours on the phone, I guess it was worth it to get a replacement. It is due to the arrival on 12/14/15

• Missing fonts will not file load

  Problem:

  Picked up a work made by another designer in Indesign. The folder and all the files (including images and fonts folder) live in the working on the network drive and not the computer folder. Tutorial Adobe indicates that if you place the font in the folder with the Indesign document, then indesign will find fonts.

  The fonts are already alive in the same folder, but it will not load the fonts automatically.

  Do I have to have the use of the network and on my computer?

  Concerning

  Carl Rainer

  Reason why it couldn't work are:

  1. Use only fonts Mac on a Windows computer or Windows emulation
  2. InDesign saved the file to a new location, where it does not find the folder of the fonts in the Document.
  3. Opening a file to a previous version before a save in the same place, it opens as a converted file and will not conclude it as new file not saved.
  4. Even as 3, open file to a template file.

• Creative cloud will not stay connected. What's wrong?

  I have problems with the creative application cloud do not stay connected. This problem did not begin until recently. Whenever I click the icon creative cloud, he asks me my email and password. I would connect, but after a short period, it would disconnect again. I'm using MacOS 10.10.5 on a MacBook Pro. It's really frustrating. I have tried rebooting, and nothing I do seems to help.

  Please follow the steps below: -.

  N ° 1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Search for a file Adobe Creative Cloud (as appropriate) and Adobe Application Manager under utility window and trash both folders.

  Step 2)

  Trash Adobe Creative cloud from Applications Eh well.

  Step 3)

  (1) right-click on the icon in the Finder, then select the option "Go-ToFolder .

  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater and OOBE.

  Step 4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.

  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater ,Adobe Application Manager and OOBE.

  Step 5)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and click on ""clean Selected " ."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  Step 6)

  Click on the link below and download the creative Cloud configuration file and use it to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

• Stupid question: why tinytots (and other similar fonts) will not work in Firefox?

  I am a user of Tumblr, if of course if I had to work on a theme, I would like to see the fonts that I have chosen to serve. In Chrome, everything seems as it should usually (relative to the fonts). In Firefox, I respond specifically to these two browsers so my theme seems not completely horrible. In my opinion, only a browsing experience more could be made if Firefox showed fonts such as tinytots for more than just me, but for someone else who is perhaps not brave enough to post about it. This brings me to another question: I'm just ranting or is it possible I can see these fonts and not know about it?

  This isn't a stupid question.

  Google Chrome has its own library of fonts.
  
  Mozilla Firefox runs Windows fonts library.

  To run on Firefox fonts, they must be installed on Windows and then Firefox must be restarted.

  Sometimes, Web sites do not use the correct font name and the police is found, even if it is installed.
  
  A good website designer would design a Web site with backup for users to load fonts if they do not have the installed font.