Windows Vista SP2 fails to install and Windows Firewall will not stay

Similar Questions

• The Windows Firewall will not stay

  I found that my windows firewall turns off on its own.   It's almost as common as each log on and opportunities more often than that, when you are connected is required to check it often. Is this normal?

  OK I got my tri (Jimmerz50) - it is necessary to AVG update - 0 has now got version9 - Version 8 was leaving swap by a virus (trogan)
  I installed AVG V9 and he found a few trogans, erased, and now the firewall remains on no worries mate! also tried this program with all pieces of virus on elephantboy etc etc, but it wasn't big found nothing!

• 800736B 2 of error Code woes. Windows Update (Vista SP2) fails to install a bunch of updates

  I know that this problem was posted a lot everywhere on the internet (even here), but I would like to explain a little better than everyone else and maybe I can somehow get to the bottom of this.

  The problem:

  I am trying to update my acer 4/5 years, grandfathers aspire running Windows Vista. Whenever I try to install the following updates:

  http://i.imgur.com/SBxv8.jpg

  I get 6 updates installation failed with error code 800736B 2. When I turn the computer off, he pretended to go through the process of 'completion' facilities update 6 (you know what I mean, it says after that windows has disconnected the user is installing updates). It takes about 15 minutes, then when I re - turn on the computer and check the updates again the exact same updates are always listed.

  The attempts of a solution:

  I downloaded and used the update tool for Windows Vista (http://support.microsoft.com/kb/947821) system. It shows the exact symptoms of the same as the rest of the updates. It "installs" (which lasts about an hour. Said it was successful. Then I restart the computer, it 'full' Update 1 on 1 which have been installed, when I opened the tool (after reboot), it says that I have to reinstall the same update (KB947821). So obviously it cannot be installed but for some reason any thought that he didn't.

  I also tried to run this tool in safe mode and had an error that says that I can't run it in safe mode. Sweet.

  I wanted to download the updates manually (I was hoping that they would be in the form of some .exe or something) then run their safe mode, since you can't use windows update in safe mode. I looked around online a lot, but could not find a way to download the updates manually. I found a bunch of guides tell me how to do, but non of them work. My guess is that they removed the support for it.

  If anyone has any ideas as to what I can do without having to reinstall windows it would be awesome. My grandfather is really exhausted all of this current vista installation so wipe everying is probably a bad idea. I would like to avoid it at all costs.

  Hello

  You can try the steps in this KB http://support.microsoft.com/kb/883825 for a similar error, but others indicated that they were able to solve this problem by using the KB.

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Vista SP2 fails to install error 0 x 80070005

  Here are the results of accesschk:

  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005\InstallCounter

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000\InstallCounter

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005\InstallCounter

  When it appeared in my automatic updates, I tried to install it and said something like this update is not necessary and disappear so I downloaded SP2 stand-alone version and it fails with the error code 0x80070005. I tried with all security software close along with other applications. I tried in safe mode and have tried all the other things available on the forum. See my other sons for more information.

  Kind regards

  Mike Miller

  Thanks, I tried the first process you suggest and expect a reply when the hard drive crashed. Maybe that's the reason that all the problems have started. I will replace the HD and hope that after all reloading, there is no more problems.

  Please close this message.

  Kind regards

  Mike

• Windows 8 is installed and now itunes will not play movies

  My itunes now asks me to put my password to play movies by saying that he must have this computer is allowed. Even after that I put my pass to successfully the video will not play.

  I uninstalled itunes and re-installed in mode "win7" without effect.
  I would be grateful for any help.
  Thank you
  Hi Harvey.
   
  Thank you for choosing Windows 8 and post your query on Microsoft Community.
   
  I need some information that I approach the solution:
   
  (1) may I know the exact error message?
  (2) is the problem associated with a particular movie?
   
  I ask that post you this question on the link given below:
   
  https://discussions.Apple.com/community/iTunes '
   
  Please answer us for any query related to windows.

• Network discovery and file sharing will not stay

  The bar notification on the screen of the network in Windows explore said that discovery of the network and file sharing are turned off and click to change. After a right-click and by turning on the network discovery and file sharing, the notification bar appears again and said the same thing.

  I have ensured that the services are running, and appears not to have solved things. I am able to ping other computers that I know are on the network.

  I didn't have this problem until a few days ago, and the strange thing is that I am able to access other computers on the local network via the \\computername method. However, access my computer from other computers or devices miss you

  Any help would be greatly appreciated. Thanks in advance.

  I realized that guys on my network have not been able to ping - me, so I did this:

  http://superuser.com/questions/375100/what-happened-to-my-predefined-rules-in-Windows-Firewall-how-can-i-get-them-b

  I activated adding predfined advanced and enabled firewall rules all incoming and outgoing in the file and printer sharing. Now, everything works fine.

• Windows updates for vista sp2 fail to install

  Hello

  13 updates to install all has so I installed the updates one at a time. I went with 2 updates KB2286198 (error code 800719E4) and Ko 2183461 (error code 80242014) are still not! I uninstalled Kaspersky Anti-virus since and none of them will install, still not back to...? !

  is there a round work

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• "Family Vista premium sp2 installed and now printer will not print.__Error message, ' Page too complex" and blank page "print."

  MS installed sp2 on my computer.

  Now, HP Color LaserJet 2840 all-in-one printer, connection direct usb does not print word documents.

  HP printer displays "Page too complex" and prints a blank page.

  USB connected to the printer is established, proven and fully functional until installed sp2.

  I have...
  computer restarted, then tried
  have disconnected and reconnected printer 110 AC, then,.
  printer unplugged 110 AC and USB, computer connection, rebooted, then,.
  removed from all printers in the control panel and the computer restarted, the printer is displayed as connected, but,.

  Always get the error message "Page too complex" and printed white page.

  Help, please.

  Hi livelabel,.

  Please use the forum for answers,

  You can uninstall all the driver/software HP printer utilities.  Visit the HP Web site for the last download driver and utility, reinstall them after rebooting your system.
  Also contact HP any known issue with SP2 for your printer model.  Make sure that file for the print job size is not greater than the printer can handle.

  Let us know if this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Defender will not stay.

  Recently, I realized that I didn't have Windows Defender on my new computer, and it was on my old.  So I downloaded.  Now, every day I put on (if I remember) which I didn't do before.  I have Windows XP and AVG (free) for protection.  I don't have Vista.  When I was reading the other posts, most of them had to do with Vista and McAfee.  I need help for my computer.  How can I keep enabled?  I went to tools, properties, etc... and he said: it's on, but then the next day, I have to restart.

  I recommend that you leave Windows Defender installed, this way if you have any questions, it's a more resources at your disposal. I use AVG and Yes AVG disables Windows Defender, however, I recently received a very bad virus and after working hours to clean and remove the files manually, Windows Defender has found the final key file.  I used AVG and Norton both ran own scans. Finally, I ran Windows Defender and it finds a file viral severe level 1. After that Windows Defender fixed and the content of the file, everything is 100% new.

  She is already here, just keep it as a safety net :-)

• Slider in windows bars will not stay together but immediately slide upward.

  I can't get the scroll bar on exploring or for the volume to hold.  He slides up, so I can't see and select files.  Moves the selection bar (to select a file), but I can't view the file is on, if the file does not fit in the current window.  Volume maximum rest and if I try to down it slips immediately up.  I tried to change the volume in Control Panel and on the windows taskbar.  This problem seems widespread on all windows.

  Hi James,

  Thanks for the reply, but I found that it is my wireless mouse.  It turns out that the roller on the tope of the mouse has been stuck/pushed down and caused this to happen.  My battery kept running out pretty quickly and the issue of the slider bar has been extremely boring.  I don't know if I should buy any type of 'special' battery as it may be related to the power of the mouse.  However, for the moment, everything's fine!   Moreover, I had already done all kinds of tests and cleanups.  I hope that this has improved the total functioning of the laptop.

  Thanks again!

  -Joanne

• Images and text blocks will not stay on-site in a target of composition

  I'm having a problem with the placement of the images and text on a target of composition. What is maddening, it's that I did several times before and it's worked very well. Now, when I place the image, it is still there - even when the user clicks on a new trigger or when the composition is entirely closed. I can provide a link to the site, do not know if this is allowed here. I'm just trying to add a trigger/target more to one of the compositions. All the settings on the images, triggers and targets are the same as they have been for all the previous ones, that I have added in the past. Any help would be appreciated, as the company that I'm running the site is naturally impatient

  Did you try to 'cut' the image, and then select the right target in the nested composition (in the upper left corner of your application window displays the label "target: Normal ') and 'Paste' the image 'in place'?

  (And: are you using the latest version of Muse?) It is a version, which refuses to add several triggers to a composition in designs complex page.)

• date and time clock will not stay set gose back to 1999

  time, back gose to 1999 after I have so far for 2012 will not stay this is why?

  I posted when there is no answer here, so I don't think mine is a double post.

• surcurity essentials does not start, and the windows firewall does not illuminate

  Hello

  I have a problem, he seems to have had a virus on my pc. Essentials of security does not illuminate and the windows firewall will not also turn on, I tried to use the tool to "fix" windows and it doesn't solve the problem.

  the original virus seemed to rename its self as a program existing and renamed the oringinal by a space in the name, for example "adobearm.exe" became "adobearm .exe" there is a space before the dot.

  The virus called his free adobearm.exe icon because it is a yellow / orange with a letter H, at the Center

  different file name her seemed to be part of the virus included "ag7yl5x8.exe".

  If you tried to close them in the task manager that they just either came back or a different file name would appear in the list.

  I also couldn't do a windows update, but I think as the tool to 'fix' as cured this problem.

  Can someone help me please.

  Thank you

  PS can't do a restore either

  I start here, THEN difficulty any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Black vista Windows 2009! system will not stay running...

  my windows system will not stay running and shuts down my computer after maybe running for 10-15 minutes... says also download 3 of 3, but instead of blocking it loads windows and then I have no sound what either.  also used windows open sometimes it always ask if I want to run windows normally know, my computer was repaired and when I came back started all this junk, please if someone can help me send me an email to * address email is removed from the privacy *. and thank you for your help.  Oh yes, it keeps asking me for my windows vista black 2009 key that I do not have...

  Black of Vista is NOT supported by Microsoft.

  Go to where you downloaded from / got fix for support.

  Mick Murphy - Microsoft partner

• My Windows Defender will not remain, it turns off

  original title: My Windows Defender

  My Windows Defender will not stay on, even though I have a scan scheduled @ 02:00 every day. I do not understand why the Defender stops, and I get a warning telling me it's off. It analyzes every day @ 02:00, and I manually do a quick scan when I see the warning icon. Help!
  Thank you for your help.

  Bonnie Mayer

  Copy davidhk129 answer to the question of Windows Defender won't start do not:

  Here's a direct copy...

  If you have
  one of the following AV, antivirus, programs installed, it will stop your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender:

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.