For a single table import failed...

Similar Questions

• Remove duplicate for a single column table

  Hi all

  So I try to work on a problem here. I searched the forums but I did find something that works for me. Here's my problem... I have a chart (conversion to a .csv file) with a lot of lines and columns. Each line is a log for a specific serial number file. The amount of columns is fixed. But, I must create a vi to go through the table and remove the duplicates under the original and create a new table. For example, my table might look like this (I added a header desc for clarity):

  Job, Tech, SN

  1827, SJ, 23827

  1825, SJ, 23827

  1827, SJ, 47384

  1827, SJ, 57483

  1827, SJ, 37473

  1825, SJ, 37473

  But I want a table attached like this:

  Job, Tech, SN

  1827, SJ, 23827

  1827, SJ, 47384

  1827, SJ, 57483

  1827, SJ, 37473

  Can someone help me?

  Thank you

  Ryan

  Here's a version that works if duplicates are not necessarily adjacent. As a side effect, the output array is also sorted by serial number.

  

• How to restore a single table from a DP Export to a different pattern?

  Environment:
  
  Oracle 11.2.0.3 EE on Solaris
  
  I was looking at documentation when importing DP trying to find the correct syntax to import a single table of an RFP to a different schema export.
  
  So I want to load the table User1. Table1 in USER2. Table1 a DP Export.
  
  Looking at the REMAP_TABLE options:

  REMAP_TABLE=[schema.]old_tablename[.partition]:new_tablename
  
  OR
  
  REMAP_TABLE=[schema.]old_tablename[:partition]:new_tablename

  I can't see where to specify the name of the target schema. Examples were the new table name residing in the same pattern with just a new name.
  
  I looked at the REMAP_SCHEMA but the docs say matter the entire schema in the new schema and I want only one 1 table.
  
  All suggestions are welcome!
  
  -gary

  I thought I tried this combination and it seemed to me that the REMAP_SCHEMA somehow too rolled TABLES = parameter > and started to load all the objects.

  If it does not fail (and it shouldn't) then please post details here and I'll see what happens.

  Let me back in the tray to sand and try again. I admit I was a bit of a rush when I did the first time.

  We are all in a hurry, no worries. If it fails, please post the details and the log file.

  Does make any sense that a parameter would be substitute another?

  No, this should never happen. We have tons of audits to ensure that labour cannot have several meanings. For example, you can not say

  Full schemas = y = foo - what you want, or a full export list export schema, etc.

  Your suggestion was the first thing that I thought would work.

  It should work. If this isn't the case, send the log with the command and the results file.

  Dean
  Thanks again for the help and stay tuned for my new attempt.

  -gary

• DV import fails after 6 months

  Since last September, I use FCP x 10.2.2 on 27 "new screen Retina 5 K, many extra horses and external HDs, some vintage for a reason.  Until today, video DV was fortunately imported from my Panasonic AG-DV2500 Pro player who manages mini and standard cassettes.  Even if the import window seems to take the fine electrons with the clock digital delay until manual termination, there is nada when I look in the compartment of the project in the creation of records every day.

  (in full disclosure, the content of my project involves sometimes get analog 3/4 "- or 8 mm video transferred first in DV until he could become a digital asset for Final Cut")

  In this case, however, nothing other than original DV is originally evil in my workflow.  Digital connections of my project are: FW400 an ext LaCie HD recorder with its FW800 output for the stroke of lightning-to-Firewire adapter to my a / v indicates a path of import to FCP.  Again, I have no real teams, beyond a steep learning curve in the reconstruction of many of the third party 7 - x utility for migration couldn't have worked since the update of major league last fall.  Remember, my problem clips seem to be important, as always, but when I look into the GUI container or in the folder of destination media X on the disc hard ext 4 TB of Seagate, not a single one of the attempted 3 duration 03:00 capture is stored where X masters media usually go.  My last catch recorded was 12 Feb.

  Does anyone have ideas - or similar experience - why import fails to do its job and create new files as usual?  My free space above the primary HD of Lacie is TB 1.84.  I got cold that it recharges on the computer and I/o devices.  Always intrigued.

  OK, I found that my 3 capricious matter in a folder to create project Date dated 2003-02-06, but not found in the main folder of media X.  Well.

  I think that recording-over on a legacy mini-DV tape segment should have kept original timecode of the cassette to the mystery date.  It's a work around, but not a problem hardware or software, so please ignore the above.

• Make error trying to 'Examining data' for some physical tables in SPR

  Hi all:

  I'm having a problem when you try to use "Show data" option for some physical tables RPD.  Note, when I use "the number of rows updated" is not question and the number of rows is updated correctly.   As I mentioned, the issue happening with little and NOT all tables in physics.

  Error I get is:

  "State SQL NQODBC: HY000 nQSError: 10058 a general error has occurred."  [nQSerror:43113] The message returned by OBIS.  [nqserror:43119] "Query failed: [nQSerror:43093] an error occurred during the processing of the statement Execute physical."

  Appreciate any comment about it.

  Thank you

  Delete the tables on what all you get and import each one separately, it will work.

  Check if helps,

  Thank you

• import fails while trying to import userdefinedfields.xml

  All,

  I'm trying to import userdefinedfield.xml from dev to QA environment and import fails with the error message below.

  [11:36:44:892 EAST of xx/07/13] 00000051 SystemOut O ERROR, 15 July 2013 11:36:44, 892, [XELLERATE. DATABASE], CHANGE ALTER TABLE USR

  java.sql.SQLException: ORA-00904: invalid identifier

  [15/07/13 11:36:44:907 EST] 00000051 SystemOut O DEBUG, 15 July 2013 11:36:44, 907, [XELLERATE. SERVER], class/method: tcDataBase/substitute is entered.

  [11:36:44:907 EAST of xx/07/13] 00000051 SystemOut O DEBUG, 15 July 2013 11:36:44, 907, [XELLERATE. SERVER], class/method: tcDataObj:handleErr - data: poError.isAction - value: F

  [11:36:44:907 EAST of xx/07/13] 00000051 SystemOut O DEBUG, 15 July 2013 11:36:44, 907, [XELLERATE. SERVER], class/method: tcDataObj:handleErr - data: poError.isCode - value: SDK. MODCOL

  [11:36:44:907 EAST of xx/07/13] 00000051 SystemOut O DEBUG, 15 July 2013 11:36:44, 907, [XELLERATE. SERVER], class/method: tcDataObj:handleErr - data: poError.isDescription - value: error editing a column.

  [11:36:44:907 EAST of xx/07/13] 00000051 SystemOut O DEBUG, 15 July 2013 11:36:44, 907, [XELLERATE. SERVER], class/method: tcDataObj:handleErr - data: poError.isRemedy - value: check for the valid column length variation

  [11:36:44:907 EAST of xx/07/13] 00000051 SystemOut O DEBUG, 15 July 2013 11:36:44, 907, [XELLERATE. SERVER], class/method: tcDataObj:handleErr - data: poError.isDetail - Value: com.thortech.xl.orb.dataaccess.tcDataAccessException: DB_WRITE_FAILEDDetail: SQL: ALTER TABLE USR CHANGE Description: ORA-00904: invalid identifier

  SQL State: 42000Vendor Code: 904Additional Debug Info: com.thortech.xl.orb.dataaccess.tcDataAccessException

  [11:36:44:923 EAST of xx/07/13] 00000051 SystemOut O ERROR, 15 July 2013 11:36:44, 923, [XELLERATE. DDM. [IMPORT], error, editing a column.

  [11:36:44:923 EAST of xx/07/13] 00000051 SystemOut O ERROR, 15 July 2013 11:36:44, 923, [XELLERATE. DDM. IMPORT] Exception when importing

  com.thortech.xl.ddm.exception.DDMException: cannot save the DataObject for SDC

  at com.thortech.xl.ddm.instance.TableInstance.finishDataObject (unknown Source)

  We are not able to reproduce the problem in other development/test environments.

  Please suggest if you have some idea on what may be the problem.

  Thank you

  Olivier

  can disable you the caching of metadata, restart the server of the IOM, and then try importing the xml file.

• CSV import failed

  Hi all
  
  I am currently working on a project to import that requires to import a huge csv file. The file has 425 columns and will contain 13000 lines. Now I'm under test for this is important and we use the available data import function when we right click. But we noticed that, when the file is too large, the import fails every time... I tried to use the sql * option table loader that creates the control files, but this failed as well. I was wondering if anyone else had this problem before and how this has been resolved in fact. I don't want to start coding java just to make this import... or create a task of talend.
  
  Thank you very much for your help.
  
  Kind regards
  
  Carl

  To generate a script in 2.1, on the last page of the wizard, click the send to the box on the worksheet.

  In 3.0, select the method of load as insert the script.

• Office automatic however, patch cumulative for Activex killbitts for windows XP (KB2736233) has failed. error code is 0 x 80070017

  During an office automatic however, patch cumulative for Activex killbitts for windows XP (KB2736233) has failed.   error code is 0 x 80070017... How to fix this?     He tells me that the installation failed, and when I close it, it asks me to install the update even.   Thanks in advance for the help.

  Hello

  1. have you made changes on the computer recently?

  2. What is the security software installed on the computer?

  3. are you able to install some other updates?

  4 is that the problem is specific to this update?

  I suggest you to follow the steps in this article and I would like to know the status.

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: '0 x 80070017': http://support.microsoft.com/kb/956704

  Important: While performing the check disk on the hard disk, if bad sectors are, check the drive will try to repair this sector. All the data available in this area may be lost.

  I hope this helps.

• Security update for Windows XP downloads but fails during installation that gives 0x8007F0F04 error code

  Security update for Windows XP downloads but fails during installation that gives 0x8007F0F04 error code

  FixIt, reboot, try again not useful

  How can I get the security properly installed?  or what happens if I don't?

  Original title: 0x8007F0F04

  Hello

  1. what day you're talking about?

  2. what Microsoft fixit you talking?

  3. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/958051

• Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) update - fail with the error 800b0100 Code

  Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R

  Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.

  Hi Alan,

  Thank you for visiting Microsoft Community.

  To resolve the problem with the installation of the updates, follow these methods:

  Method 1:

  See the article and check if that helps:

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  Method 2:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest that you follow the steps described in the article and try to reset Windows Update components:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• EPMA Batch Client import failed

  Hi all

  We have a planning application which is EPMA and we have implemented of scripts to automate the loading of files of ADS using EPMA Batch client. WEA re do this as part of our 11.1.2.2 migration towards 11.1.2.3

  11.1.2.2, we have all the components of EPMA installed on a server but 11.1.2.3 we EPMA distributed on 2 servers services

  EPMA, planning installed in PRDPLN001 and we see lot-client installed in PRDFND001 where most of the Services of the Foundation is installed

  We have scripts in PRDFND001 server and we get the below error

  2015-04-20 04:52:57, INFO coming out with return code 407 - 420 run import Failed

  2015-04-20 04:52:57, 422-thank you for the INFO using EPMA Batch Client!

  This is the step where it fails

  Set bpmaserverurl ='http: /PRDPLN001/hyperion-bpma-server';

  set workspaceurl =' http:// PRDFND001 : 19091/awb /';

  Run the import Parameters (profilename, filename, importtype, waitforcompletion) Values ('flatfile', 'TEST_BU', 'E:\InboundFiles\HYP_BU_EXPORT.ads','true');

  quit smoking;

  However, we are able to succeed the 'Validation' and the 'deployment '.

  What could be the possible reasons for the error

  Concerning

  Amarnath

  Just for everyone. I solved the problem

  In fact, I forgot to mention the error I wanted to come earlier. Apologies for this

  2015-04-21 10:23:02, 829 ERROR java.io.IOException: the system cannot find the path specified

  We have a batch separately script that calls the script mentioned above (according to the original post) and it looks like below before (not working version) and after (after a change of work)

  Front - Batch file

  off @echo

  echo % date of BU_LOAD: ~ 10% date: ~ 4, 2% date: ~ 7, 2%

  Set resultfile=ResultFile_BU_%date:~10%%date:~4,2%%date:~7,2%.txt

  E:\QA\Oracle\Middleware\EPMSystem11R1\products\Foundation\BPMA\EPMABatchClient\epma-batch-client.bat-CE:\Scripts\DIM_LOAD\TEST\TEST_BU_LOAD_ADS.txt-R"E:\Scripts\DIM_LOAD\Log\%resultfile%' - STrue

  CD /.

  Front - EPMA Script file

  Set bpmaserverurl ='http: / PRDPLN001/hyperion-bpma-server ";

  "Set workspaceurl ='http://PRDFND001:19000 / working space."

  login username, password;

  Run the import Parameters (profilename, filename, importtype, waitforcompletion) Values ('flatfile', 'TEST_BU', 'E:\InboundFiles\HYP_BU_EXPORT.ads','true');

  quit smoking;

  After

  off @echo

  echo % date of BU_LOAD: ~ 10% date: ~ 4, 2% date: ~ 7, 2%

  Set resultfile=ResultFile_BU_%date:~10%%date:~4,2%%date:~7,2%.txt

  CD ' E:\InboundFiles

  E:\QA\Oracle\Middleware\EPMSystem11R1\products\Foundation\BPMA\EPMABatchClient\epma-batch-client.bat-CE:\Scripts\DIM_LOAD\TEST\TEST_BU_LOAD_ADS.txt-R"E:\Scripts\DIM_LOAD\Log\%resultfile%' - STrue

  CD /.

  After - EPMA Script file

  Set bpmaserverurl ='http: / PRDPLN001/hyperion-bpma-server ";

  Set workspaceurl = "http://PRDFND00119000/workspace";

  login username, password;

  Run the import Parameters (profilename, filename, importtype, waitforcompletion) Values ('flatfile', 'TEST_BU', 'HYP_BU_EXPORT.ads', 'true');

  quit smoking;

  I've done below to solve the problem

  As the EPMABatch was not able to identify the location/path of the file ADS. I gave a CD command to go to the inboundfiles directory and called the EPMABatch directly from there, giving the file name directly. This time the file got loaded without any problems

  Not sure why it is not able to identify / detect the full path of the file. It worked very well in 11.1.2.2 version though. He had to dig to find the reason for the question

  Concerning

  Amarnath

• Dreamweaver several graphs in single table cell

  Dreamweaver is having problems when I try to combine multiple charts in a single table cell. Some are separated by two end just "" entries, while others do not accept these separators. Pleas you show me the right way to handle this.

  Jack,

  • Tables should not be used for web page layouts.
  • Tables for tabular data such as spreadsheets and graphics only.
  • Today, we use an external CSS file for the layout, typography and other styles.

  Please show us what you are trying to do by copying and sticky code in a reply from the web forum.

  Nancy O.

• Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' table

  Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you

  Oh dear.  It turned into a terrible mess of a thread with opinions and advice.    You do your layout with Word.  In my experience, Word is a nightmare when it comes to positioning many areas of text and images.

  You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file.  But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen.  Dows following?

  How big are the pictures you used in Word?  They probably didn't need to be very large, because each image is only an impression at a relatively small size.

  First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF

  It will keep the text in the form of scalable vector objects which allows printing at any size.  However, I don't have the knowledge of how Word uses images.  I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images.  Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter.  You need to do some research on it, because it might make you save a lot of time.

  You have Publisher?  Editor certainly reference the drive images, and friezer downsize to fit the page.  I suspect that you can import a Word into Publisher document, which would put you best part of the way with it.  I would like to test it, but I use it as a loyal user of Adobe InDesign.   If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop.  Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels.  When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)

  Good luck

  

• Cannot import ap_invoices due to this error 'VALIDATE by DEFAULT IMPORT FAIL'

  Hi all
  

  
  

  During the import of ap_invoices_interface bills, bills was rejected (status).
  The reject_lookup_code is 'VALIDATE DEFAULT IMPORT FAIL' in ap_interface_rejections.
  
  We do not know the meaning 'VALIDATE by DEFAULT IMPORT FAIL'.

  
  

  You encounter this error? do you know how to fix this?

  
  

  need your help, she paralysed once part of the business process...
  

  
  

  RDBMS: 11.2.0.3.0

  Oracle Applications: 12.1.3

  
  

  Kind regards
  

  Hello

  Versions and FND log would be useful for understanding. The code excludes APPLICATION of PAYMENT information in the cursor. Because you don't have any of those to be imported, I can exclude it there a problem with the type of imported invoices. Now, I need to know where the failure, the FND log should show me.

  Cheryl

• single table hash clusters

  I created a hash cluster single table like this:
  
  create tablespace mssm datafile 'c:\app\mssm01.dbf' size 100 m
  Segment space management manual;
  
  
  create the cluster hash_cluster_4k
  (id number (2))
  size 8192 single hash table is id hashkeys 4 tablespace mssm;
  
  --Also created a table cluster with the line size such as single record corresponds to a block and inserted 5 records each with a separate key value
  
  
  CREATE TABLE hash_cluster_tab_8k
  (number (2) id,)
  txt1 tank (2000).
  txt2 tank (2000).
  tank (2000) txt3
  )
  CLUSTER hash_cluster_8k (id);
  
  
  Begin
  because loop me in 1.5
  Insert in the values of hash_cluster_tab_8k (i, 'x', 'x', 'x');
  end loop;
  end;
  /
  exec dbms_stats.gather_table_stats (WATERFALL of the USER 'HASH_CLUSTER_TAB_8K' = > true);
  
  
  Now, if I try to access the folder with id = 1 - it shows 2 I / O (cr = 2) instead of the single e/s as provided in a hash cluster.
  
  
  
  Rows Row Source operation
  ------- ---------------------------------------------------
  1 ACCESS HASH_CLUSTER_TAB_8K HASH TABLE (cr = 2 pr = 0 pw = time 0 = 0 US)
  
  
  If I run the query, even after the creation of a unique index on hash_cluster_tab (id), the execution plan specifies access hash and single e/s (cr = 1).
  
  This means that for a single e/s in a single table hash cluster, we create a unique index? It will not create an additional burden to maintain an index?
  
  What is the second I/o necessary for in the case where a unique index is absent?
  
  I would be very grateful if gurus could explain this behavior.
  
  Thanks in advance...

  user12288492 wrote:
  I ran the query with all 5 id values and the results have been more confusing.

  During the first inning, I had VC = 2 for two values of keys, the Czech Republic rest = 1
  During the second inning, I = 2 for a key value, the Czech Republic cr rest = 1
  In the third set, I had VC = 1 for all values of keys

  The effects vary depending on the number of previous runs and the number of times you reconnect.
  The extra CR is a cleansing of the block effect. If you check the access of the buffer (events 10200-10203), then you can see the details. Simplistically, if you create your data, then connect and interrogate one of the lines (but not id = 5, because that will be cleaned on the collection of statistics) you should be able to see the following numbers:

  cleanouts only - consistent read gets                                        1
  immediate (CR) block cleanout applications                                   1
  commit txn count during cleanout                                             1
  cleanout - number of ktugct calls                                            1
  Commit SCN cached                                                            1
  redo entries                                                                 1
  redo size                                                                   80
  

  On the first block visited, Oracle made a visit to buffer to untangle a YVERT cleaning (ktugct - get the commit time). This cleans up the block and caches the acquired RCS. The rest of the blocks that visit you in the same session should not be cleaned because the session can use the updated SNA caching to avoid needing a cleanup operation. Finally all the blocks will have been cleaned up (which means that they will be written to the disk) and the extra CR stops happening.

  There is a little quirk - drain plug seems to apply to the format block calls - and I do not understand why this was did not each row inserted thereafter.

  Concerning
  Jonathan Lewis