For HP Desktop factory reset

Hi I would like to ask what should I do if I want to reset my office because none of my applications on the start menu are working and when I go to settings to do a refresh it says I have to download a bunch of programs that was already on the desktop when I bought (Alcor Micro USB Card Reader Driver programs lot of HP like connected music or updates (, NVIDIA programs to name a few) I did not have a CD inside the box when I bought it. What should I do? I think that just refresh my PC (nevermind making a plant full reset because it will destroy the same things) cause a lot of problems because I'm not sure that most of the programs came 'factory' and if I update my PC everything will be lost, and I won't be able to what whether re-download again. However if I don't do something I can't do anything with the PC because even the store isn't open. Help please!

Do a system recovery will reset on factory installation, including the original installed by HP drivers/software.

http://support.HP.com/us-en/document/c03489643

To read the article here > recovery media creation >Windows 8

Tags: HP Desktops

Similar Questions

  • For Equium L20 factory reset

    Recently I went to run a new anti-virus program that I had downloaded, but it said I didn't have enough room to run it. I went to the list of add or remove programs and essentially removed everything that I have ever used, or he said had not been used since 2005.

    It seems I accidentally deleted something quite important, and now my internet is not working, my laptop is seen probems marketing, and its just be generally slow and not make it as its meant to do.

    I managed to back up everything that I can do a factory reset. the thing is that I bought my laptop used, because I could not afford a new at the time, so I don't have a recovery disk.

    My laptop is an Equium L20 - can anyone help?

    > Other ideas?
    You can try to contact the nearest authorized service provider. Maybe they can help you.

    But to be honest, you need to recovery media. You can use the CD of Microsoft facilities for the installation of the OS. All the drivers, tools and utilities that you can download at Toshiba supports the page.

  • need to floppy disks for starting a factory reset

    Hi, I need to get the diskettes to install for my sony vaio labtop model PCG-71211 L. can you help me. Bob

    Hello

    PCG - 71211L # is the code given by Sony hardware configuration.

    What is the model # computer? Check the following link to locate the model #:

    http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

    However, you can buy the Sony parts recovery discs and accessories team:

    https://servicesales.sel.Sony.com/Ecom/accessories/Web/contact_us.jsp

    Authorized Sony parts distributor:

    http://eSupport.Sony.com/us/Perl/support-info.pl?info_id=927#place_order_9

    If my post answered your question, please mark it as an "accepted Solution".

  • Z10 blackBerry I want to put up-to-date OS 10.3.1 OFF my Z10 phone. Desktop factory reset just reinstall the update?

    Somehow I woke to this update on my phone. IM NOT happy. My phone does not work now. I can't shout. I can't text. For not to mention the battery now drains in 4 hours and get hot super fast. I never had any of these problems before. My battery until yesterday lasted while using the day /. All THE features on my phone worked.

    This new update is * beep *. There was nothing wrong with the previous version. I want this back and cannot get it.

    Suggestions before you throw this phone and buy a Samsung?

    BLACKBERRY - YOU BETTER BE LISTENING FOR YOU CUSTOMERS. I SEE MANY HERE ARE NOT SATISFIED WITH THE SO-CALLED IMPROVEMENT.

    YOU ARE TO LOSE YOUR MARKET.

    SMARTEN UPWARD!

    OK... see:

  • How long HP Pavilion G6 2320 need to factory reset

    Hello

    I have the HP Pavilion G6-2320TX laptop with 1 TB of HDD.

    My machine is a month old.

    Initially, my laptop took 15 or more minutes to start. WiFi and bluetooth didn't work. Takes too much time to install windows updates.

    After searching this forum, I decided to factory reset using the hp Recovery Manager.

    Spent 4 hours and the screen displays "reset your PC (25%). ».

    I want to know how long does take for the complete factory reset? I'm a little worried because here in my region loadshedding is a problem.

    Help, please.

    I've seen reports of recovery taking a night or more to complete. but I've never had it take more than a few hours. If you lose power I hope the battery will carry you through.

    BTW, the questions declare you which led to the recovery can be a sign of hardware failure, usually disk or sometimes the memory. This could also lead to recovery fails. I suggest to use F2 to power on to use Diagnostics to test your hard drive and memory if the recovery fails, or if the recovery ends and you still have performance problems.

  • I bought for the CS6 design standard last year and had to disable and uninstall due to factory reset on computer, now when I open my products purchased to redownload my product, it won't let me? It is grayed out and thre no other links are available

    I bought the standard CS6 design last year and had to disable and uninstall due to factory reset on computer, now when I open my products purchased at re download my product, it won't let me? It is grayed out and there is no other link available for download?

    Download & install instructions https://forums.adobe.com/thread/2003339 can help

    -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

    -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

    -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

    -you will need to enter your original serial number during the installation for non-Cloud programs

    - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

    Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  • I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

    I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

    Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

    You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

    Use iTunes to restore your device to factory settings - Support Apple iOS

    If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

    copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

  • HP Photosmart C4780: Factory Reset for HP Photosmart C4780

    I recently started using a new wireless router after a move, and I'm able to get my computer and my printer on the same network.

    I tried to figure out how to change the network that connects the printer, but I was completely failed. I did a lot of searching around, and nothing seems to work. For what it's worth, I had all the last printer and driver software with the software update feature on my Mac. I am also able to connect to the printer and print using a USB cable. But I'm completely unable to access all the settings of the printer that would allow me to move the printer to the same network as the computer. If anyone has any suggestions, please let me know.

    I think that if I could get the printer to do a factory reset or a hard reset, that might be a better place to start. I think that the printer has some memory kept the old wireless network, because this network name appears on one of these pages, you can print troubleshooting. But if the printer didn't remember any wireless network, then it might be easier to implement on the new wireless network. Unfortunately, I can't find any information on how to do a factory zero either, so if anyone knows how to do, please also let me know.

    Hi @rumsmuggler

    Forgive me for the delay in my response.

    It's strange, that it must continue to blink and only go solid once your computer is connected to the network printers.

    It could be the wireless radio no longer works properly, I will send you a different reset in a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

    Then you can try the steps again.

    Please let me know if these steps solved your problem, or if there is anything else I can do to help.

    I look forward to hear from you!

    Thank you

  • Ask for help on the execution of a Factory reset on a Dell Inspiron 530 running windows Vista Home

    Hello I am a request for help and advice on preforming a factory reset on a Dell Inspiron 530 running windows Vista Home. I've never done this before and I am new on this. I appreciate any help I can get. Thank you.

    Thank you, Robin

  • Factory reset: no where Reset for?

    I've had this computer for a while and you have downloaded many unnecessary programs and unnecessary processes are running reduce my activity down. Time for a factory reset, the only problem is that I do not think I have something that needs to be reset. I wiped the entire hard drive and reinstalled windows and all the drivers. I don't not want to complete this process again because my computer needs special drivers and it's annoying to reinstall them every time. So since I installed windows and all the drivers myself, a factory reset always work?

    I don't see how you could even have a factory restore option that you stated you wiped and reinstalled win - 7 :)

    You would have to create a system image after fully update 7 to have a

    Well maybe you'll base this time :)

    It's free and very easy,

    https://www.YouTube.com/watch?v=KQA7NlLvxg8

  • Real factory reset for OfficeJet K60

    How can I make a real factory reset on an OfficeJet K60? I chose the option of this name from the LCD, but I can still print to the event log with a list of numbers dialed and received, along the speed dial list. Not the kind of thing you'd expect to see in a device you just plant.

    As for motivation, it was the accountant's fax machine. I am trying to be responsible and erase all data of him before that he go to the recycling business. For lack of a real factory reset option, does anyone have disassembly instructions so I can destroy the circuit board?

    Hi Craig,.

    I'm glad that solved your problem!
     
    The reason why I didn't after resetting publicly, it is that it does not apply to all situations of troubleshooting. Resets are the last step after an exhausting standard troubleshooting. If the reset doesn't fix the problem, this usually indicates a hardware problem.

    Reset instructions can have unexpected results if not used properly. These steps are reserved for situations of 'last resort '. Detachment is publicly could owners their products in a complete reset reset is not necessary.
     
    Finally, as with any reset, power cycle returns the default printer and clears the saved settings, it would not be advisable to proceed with this step, immediately.

    Please let me know if you have any questions!

  • Factory reset for Windows 7 will restore my BIOS too to its original state when I bought it?

    I now use Windows 8, I bought my laptop in JULY 2012. It came with Windows Home Premium and I have the recovery disc for Windows 7. I intend to factory reset my laptop because of my disappointment with Windows 8 and supprt for Windows 8.

    I want to know if the "factory Reset" will restore the BIOS of the laptop in its original state. I mean I have my BIOS set to update to the latest. I want to return to its former State. How long is the factory reset also takes? I own edition HP DV6T Quad 7000 with 32 GB WSSD.

    Intel RST does not have anything, my HARD drive is shown in non-RAID and there is no way I can change it to RAID. My last option is to try the Factory Reset and see if it helps. I'm sure that TSRI will work if my BIOS is restored to the original condition with everything so it starts to detect my HDD in RAID.

    Hello

    A factory image recovery will not affect the version of BIOS or current settings. The duration during which the factory image recovery takes wil depend on what type of recovery media that you have. If you have a usb recovery media that it will probably wait maybe thiry minutes. Use you a recovery value disk while recovery might take a few hours to complete.

    Once you start the recovery not to touch the keyboard.

    Make sure that the wireless is turned on before commit you to the recovery.

    Best regards

    ERICO

  • Factory reset for VGN T37GP and how to back up the files of windows before hand

    I have to do a factory reset for VGN-T37GP (Australian model?)

    I need to reload the Windows operating system and delete the previous owners files.

    There is 1 link on which I can click on the Sony site that will do it without too much hassle?

    I don't have a copy of the Windows operating system either, I was wondering if Sony which will provide once I click on the link? (There is a sticker windows with serial details on the back of the Vaio, so I think that Sony will provide it).

    Can someone direct me to where I can find a link to the question above? Thank you.

    Also noticed a lot of heat in the upper left rear of the Vaio. I'm guessing that it may break soon.

    Model VAIO: VGN T37GP

    What is the life expectancy of the Vaio model: VGN T37GP? On average?

    I don't have the recovery disks. They are free to download?

  • Have I not correct recovery DVD for a factory reset?

    Hello

    My laptop is a ProBook s 4540

    When I bought it, it came with 4 DVDs:

    • Application and Driver Recovery DVD (windows 7)
    • Operating system DVD Windows 7 Professional SP1
    • Application and Driver Recovery DVD (windows 8)
    • Operating system Windows 8 Pro DVD

    At some point I want to Factory Reset my laptop and I wonder if this dvd is to do it since I do not have the recovery with the recovery discs manager.

    Have I not correct recovery DVD for a factory reset?

    Hello

    Even better. Factory reset will bring more information, including the bloatware. Two sets of DVD (for Windows 7 and Windows 8) are the BEST companions. You will get your machine under control and you can download other software also under control.

    We all love having two RST for each operating system.

    Kind regards.

  • How to get factory reset disks for Satellite Pro L40?

    Hi all

    Ive got someone other Toshiba Satellite Pro L40 attempt to fix, it got a virus, and the best way to solve this problem is to do a factory reset, so I copied all the personal files on DVD and went to do a factory reset, but told me that I need the discs...

    But apparently, this laptop was given as a replacement by an insurance company, and no records were provided, then how to to get the disks?

    Thank you
    Angus

    Hello

    Not sure if you will be able to order this disc from this page:
    https://backupmedia.Toshiba.EU/landing.aspx

    Sometimes these disks cannot be ordered if the notebook series would be dropped.
    In any case, check out the page and try

    It may be possible to order this disc

Maybe you are looking for

  • iMac screen just turns white

    my iMac screen went white. I turn it on and have nothing else than a white screen. Y at - it shortcuts keys for a difficult stop for these devices? Or does anyone have a real success for this scenario?

  • Autotune in Garageband with MIDI

    Hi, is it possible to autotune voice in garageband by MIDI sequence? Just add singing and force developed by the noon (no external device, only file .mid midi sequence)

  • Try to reinstall Snow Leopard, no disc to install to

    My computer crashed and when I rebooted I got an error which means not only no BONES. I try to use a Snow Leopard disc to reinstall Mac OS X, but when I get to the point where it asks me to "Select the drive where you want to install Mac OS X", nothi

  • Re: Satellite beeps Pro 4 times at the beginning upward

    When I turn on my Satellite Pro it rings 4 times then stops. After a few seconds, that the fan turns off, the power button stays on, but nothing else happens. Can someone tell me what mean the beeps? Thank you.

  • Qosmio G50-129 no sound with HDMI connection

    Hello. I have a Quosmio G50-129. Recently, I tried plugging it into my Sony Bravia LCD TV via the HDMI connection.I have video output but there is no sound on the TV. I tried to set the HDMI as audio device as default and the sound level meter in the