for iteration of loop problem

Similar Questions

• "Setup is preparing your computer for first use" loop problem

  Hello, I was hoping you guys could help out me with a big problem, I ran across when trying to install Windows 7 on a desktop computer new, custom - build. I managed to successfully install my Windows 7 64-bit, it appeared, but when I try to run it, that I will meet a black screen that says "Setup is preparing your computer for first use" and it will stay there forever, I would say. I let it run all night and didn't go anywhere.

  I tried to start in safe mode, and Windows was loading files sys32, he got to "Classpnp.sys" and it froze. After a few minutes, the screen is blacked out, and I got fired the familiar screen "Setup is preparing your computer for first use.

  I bought the copy of Windows 7 nine FRY, there will be no problem with that. My HD is a (new) 240 GB PNY Optima SSD, my mobo is a (new) Z97X-SLI Gigabyte, and I have 16 GB of RAM. All these things have been recognized by my BIOS, it seems that everything is properly connected.

  I tried to install Windows 7 on a second time and exactly the same thing happened. I also tried to repair the installation to start upward, but he finds no problems. Also a check of the memory and the disk has verified without any problem. The only things I plugged are my monitor, keyboard, and mouse.

  Does anyone know of a workaround for this screen loop "first use"? Any help would be greatly appreciated.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are Overclocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.

  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory

  sticks are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/

  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)

  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your hard drive

  Intel® drive SSD Toolbox

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:

  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:

  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  Support PNY: http://www.PNY.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html

  Samsung Magican review:

  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  = Is installed after Windows =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?

  Check their support site for the latest drivers as the CD that came with the computer

  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:

  Download and install the most recent Windows 7 or 8 drivers for your card.

  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx

  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos

  or equivalent ATI.

  Prime 95:

  http://www.Mersenne.org/freesoft/

  It's a stand alone .exe file contained in an archive .zip.

  Simply choose to run the 'stress test' option for 8 hours or more.

  If your PC can pass this test, your memory and CPU

  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:

  The temperature of each core of the processor.

  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect

  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.

  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php

  Watch the clock speed of the CPU under various conditions of loading

  (when using speed step technology Intel EIST).

  #1 Note:

  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory

  and the "SPD" tab shows the nominal speeds for each memory location that is filled.

  #2 Note:

  Compare the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.

  voltages, temperatures, fans speed.

  http://www.CPUID.com/HWMonitor.php

  Speccy:

  Advanced for your PC system information tool.

  Need to know what's inside your computer?

  No problem! Speccy will give you all the information you need.

  Note: May or may not show the motherboard manufacturing.

  Overview: https://www.piriform.com/speccy

  Free version: https://www.piriform.com/speccy/download

  Test of Stress of FurMark GPU (graphics card):

  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/

  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:

  Provides information of the car and has an option (tab scan error) to test your drive.

  http://www.hdtune.com/

  CrystalDiskInfo:

  http://CrystalMark.info/software/index-e.html

  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/

  Monitors the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:

  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.

  It displays your drives model number and compares your drive with other discs of the same brand and model.

  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.

  http://www.almico.com/SpeedFan.php

  GPU - Z:

  A utility light, designed for you give information about your video card and GPU.

  http://www.techpowerup.com/GPUZ/

  PC WIZARD:

  A powerful utility designed especially for detection of hardware, also analyses more.

  He is able to identify a large scale of system components and supports the latest technologies

  and standards.

  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Cursors in PL/SQL for loop problem

  Hello. I have a problem with line 6 in this code. It should write the name of each table as well as the number of tuples on the inside. However, he does not 'row.table_name' as the actual table name.
  
  Declare the cursor tableNames IS select table_name from user_tables;
  numberOfTuples number (10);
  Start
  for tableNames line
  loop
  Select count (*) in the numberOfTuples of row.table_name;
  dbms_output.put_line(Row.table_name ||) « a » || numberOfTuples | "n tuples.");
  end loop;
  end;
  /
  
  ERROR on line 6:
  ORA-06550: line 6, column 46:
  PL/SQL: ORA-00942: table or view does not exist
  ORA-06550: line 6, column 1:
  PL/SQL: SQL statement ignored
  
  Published by: 938330 on 3.6.2012 09:08

  Yes. You must use "immediate execution" here.

  This SQL statement is a dynamic sql, that is, the full text is not known prior to execution.

  If you ask a fixed table as a student, employee, etc... You can query the table directly.

  Here, you generate the table dynamically via a cursor name. So here, Oracle is considering "row.table_name" in tabular form (as a student or employee) and saying table/view does not exist.

  Kind regards
  CSM. S/N

• loop for and while loop with empty table entry

  Hello

  I have a question with loop and loop.

  When a constant empty array (zero element) is connected to the loop For with "allowing the index", there are no interactions performed in loop For. But, if the loop is replaced by any loop, no problem.

  LabVIEW 2010

  Hello

  It is ok. I have no problem at all.

  For the 'loop' For when you connect the table thanks to indexing, the number of iterations is set to the size of the array. The iteration number assigned to N (in your case 10) is ignored.

  For the 'While' loop the number of iteration is defined by the Boolean Condition and the size of the array is ignored.

  Paul

• Equium M50-244: loop problem internal ati2dvag.dll

  I had a M50-244 XP Home Edition (sp2) who have ATI onboard until I uninstalled it completely. The laptop has become totally useless vomit ati2dvag.dll inner loop problem and nothing seemed to heal so I decided to completely get rid of ATI.

  It started with VGASAVE which, with a few adjustments, work is fine and so my machine now. I disabled the video as controller he kept coming up with "new hardware found" and I didn't load the drivers more who would do what he started crashing again.

  Currently its on 'test' and I'm doing everything possible to see if it will crash once again, I hope not.

  Maybe I need another driver and activate the video controller, but I am hated for doing anything more now that his works normally, finally!

  Some said the installation of the graphics driver on the site omegadrivers.net and improves the performance of the graphics card.
  Maybe an installation of the driver from the site could be useful.

  Check it out

• Time for a while loop to run once

  Hello guys,.

  I want to measure the time for a while loop to run once. There is a piece of code raised. So I just created a simple VI to try, please let me know which is the right way to do it?

  And I wondered, when I run the VI without highlighting the execution, he wouldn't give me a number, maybe it's because the code is simple and really fast? I have to highlight all the time?

  Thank you

  Not quite right.  Both get primitive value time will run at the same time.  use an image sequence to force the order of execution, as shown.  I also brought in the relitve of accuracy seconds vi of VI. LIB\utilities because it depends on the clock of the system rather than the mSec timer accuracy.

  

• While why broken arrow will not appear for a timed loop

  Hi all

  I need a little clarification relative to normal while loop and timed looping in labview.

  In labview, if I keep a while loop on a block diagram, broken arrow will appear in the upper left corner of the window indicating the error. It displays error because I have not wired conditional terminal of the while loop.

  But same is not the case for a timed loop. Can someone tell me what is the reason behind this...

  If I release the conditional terminal of the timed while loop, it runs in infinfite time like a normal while loop. Then y labview behaves differently for these two types of loops in the scenario above.

  FYI... I'm using labview 2009.

  Waiting for response.

  Thank you

  Herald

  Ruben,

  the reason is quite simple: call loops are mostly real-time and FPGA targets. Since most of the applications on these targets work continuously (at least this is more often the task), it is possible to create a loop that does not end. So the timed loop by default assumes that there is no need of a stop button.

  The 'normal' while loop needs code for termination (conditional terminal) because normal applications on Windows/Linux/Mac are used to be fair...

  hope this helps,

  Norbert

• Outlook Express 6: your server has unexpectedly ended the connection. The potential causes for this include server problems, network problems, or a long period of inactivity. Error number: 0x800ccc0f

  Original title: Windows XP and Outlook Express 6

  I have a new computer with outlook express and went through the set up instructions.  When I tried to send a test email, I got this error message:

  "Your server has terminated suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'pop.mail.yahoo.com', Protocol: POP3, Port: 110, secure (SSL): Yes, error number: 0x800CCC0F. »

  How can I fix this error message and have e-mail sent via Outlook?

  Hi Jeanette Logan,
   
  Here is an article that addresses this issue. Follow the steps listed in the article for this problem:
   
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

• Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

  Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

  t-4-2

• Windows Live Mail send any emails. "Your server has terminated suddenly the connection. The possible causes for this include server problems. »

  original title: live mail not sending

  My windows live mail 7 stopped sending a reason any.  It has worked very well.  It receives mail ok.

  Whenever I try to send an email I get the following error

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Topic 'task on cognition.
  Server: 'smtp.tiscali.co.uk '.
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.

  Any help appreciated.

  It can be something as simple as turning off email in your anti-virus program that is unnecessary and can cause this. However, if it does not, ask the experts in this forum. Here, few people use this e-mail program.

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• I bought Adobe Acrobat Pro 9.  I used it on my computer for years with no problems.  Today he gave me the following message: "license for this product has stopped working.  You cannot use this product at this time.  You need to fix the

  I bought Adobe Acrobat Pro 9.  I used it on my computer for years with no problems.  Today he gave me the following message: "license for this product has stopped working.  You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. (0)"I then uninstalled and reinstalled using the license key of my package, and I just get the same message.  I contacted customer service and they told me that they are unable to support me and directed me to the forum.  Please help as soon as POSSIBLE.

  Error: "License has stopped working". Windows

• I had to uninstall Acrobat Reader DC and back to Acrobat Reader 11 for software we use for work.  The problem is that after I did my Internet Explorer gives a message that the plugin player DC is missing?  I reinstalled DC and uninstalled again with

  I had to uninstall Acrobat Reader DC and back to Acrobat Reader 11 for software we use for work.  The problem is that after I did my Internet Explorer gives a message that the plugin player DC is missing?  I reinstalled DC and uninstalled again without success.  Any suggestion would be appreciated.

  You can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the full Setup offline reader for the version you want from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• Download for the CF file problems

  Hello, I hope someone here will have an answer to this. I'm having a problem getting two images to upload to the server. The first image will always be mailed, but the other does not. The entry put in the database for the two paths of the image, but I can't understand why the second will not download. I enclose the code.
  
  
  Thanks in advance for any help.
  
  Weston

  For some reason, I never thought to check the permissions on the folders. For anyone having this problem later, double check your permissions of folder on the server. I did have no write permission set so once I changed those he loaded the file.

• Null values for DB2 are causing problems

  Hello
  I have another problem with the link to the database to DB2 on IBM iSeries Access for Linux 64-bit OEL5 with gateway database Oracle and unixODBC 2.2.14.
  DB link works. However, null values for DB2 are causing problems. "The columns Date null on db2 return a date ' 30.11.0002 ', and the columns of characters that are null return an error ORA-28528: heterogeneous Services data type conversion error.
  isql returns the correct results.
  
  How can I fix? May set some parameters for the conversion of the data on the entry door?
  
  Thank you.

  If the driver is not fully ODBC level 3 compliant and functions of the spleen, we are lost. But sometimes drivers ODBC level 3 compliant, but lack the correct implementation of 64-bit. In these cases, we can tell the gateway to use the 32-bit ODBC 3 standard adjustment level in the gateway init file:
  HS_FDS_SQLLEN_INTERPRETATION = 32

• go to the next iteration of loop for and continue execution of the previous iteration

  Hello everyone,

  I want to run a loop with an offset to each iteration. I explain: I want to run a task multiple times (for loop), but with a variable delay in each iteration.

  Thus, if we put t = 0 before you run the loop and I use 3 iterations. I put a writ of execution to the first ieration after 3 sec then skip to the next iteration of course without waiting the end of the previous iteration and run the current iteration after 1.5 s and go to the third ieration (once again without waiting for the latest iteration).

  I conclude: this is a simultaneous execution of a for loop (10 to 50) from different eras (variable time between t = 0 and each running of each task.

  The problem I found in the loop is the fact that I have to wait the end of the time delay in each iteration bfore going on to the next.

  Best regards

  In all languages, a loop iteration FOR happens AFTER previous.  However, go with the parallelized FOR loop can happen to you.