For JavaScript code completion included?

Similar Questions

• Someone secure for dynamic code information includes?

  I found a few messages out there on how to dynamically change a php include to say

  <? php require_once('.. / Connections/connStr_pots_db.php');? > to
  <? php require_once('.. / Connections/connStr_pans_db.php');? >

  using a $_SESSION, $_GET or $_POST etc. But since they are all so fearfully speak of security, and given that so many people want to know the deployable without wading through facts and yoke back together 15 screens of "almost correct", "corrected", 'Oops I forgot', 'Yes it's good, but here's your disaster... "forum messages, is - that someone (you know who) were all VERY SOLID and SECURE CODE by which we lesser mortals can remove the main php code (i.e. PRE - <!) DOCTYPE html PUBLIC "(-//W3C) from a dynamic page, save it as an include file, for 2 or more pages of php code head and then select the correct page dynamically passing parameters to the page destination.php, which would then show the correct information and we connected to the correct databases?"  It would be SOOO useful. I already understood how to get the code, save it, and reinsert it, it is the easiest part, but what about the rest?

  As always,.

  Thanks for the Forum from Adobe

  The key to security on the basis of the output on dynamic parameters is to check that the setting is an expected value. For example:

  session_start();
  $valid = array('pots', 'pans');
  if (isset($_SESSION['db']) && in_array($_SESSION['db'], $valid)) {
    require_once('../Connections/connStr_' . $_SESSION['db'] . '_db.php');
  } else {
    header('Location: http://www.example.com/404.php');
    exit;
  }
  

• Cannot set color for comments JavaScript codes

  The color for my comments JavaScript and JQuery is silver, but looks like I did what I have to make them green:

  

  Nobody knows what they are still money? I use Dreamweaver CS4.

  Thank you

  Yes.  I just did again, by clicking OK twice to exit completely.

  But I got it!

  The code JavaScript is inside a php file, and Dreamweaver color controls have a special section for JavaScript in PHP, that is totally separate from the JavaScript right.

  Thanks for making me look more closely.

• Just a click away from the archives in the Wayback Machine of current page (JavaScript codes ask for bookmarklet)

  I wish, I can click a bookmarklet in the bookmarks bar to display the search results of the Wayback Machine for the current page. In other words, I wish that there may be a bookmarklet that opens at the following URL:

  http://wayback.archive.org/web/ * / URL_of_current_page

  I know I can drag a bookmarklet to the bookmarks bar and then his right - click on the Properties menu, change the text of the location to the JavaScript codes that opens the URL of the Wayback Machine above. I know nothing about programming.

  So, could someone help me with the necessary JavaScript code?

  Thank you.

  PS: I know that there are some add-ons that deals with WaybackMachine, such as 'Resurrect Pages' or 'Wayback Machine 20100602 ". But I have not found one that does what I want.

  javascript:{var%20url=location.href;void(window.open("http://wayback.archive.org/web/*/"+url));}

• Popup of console log in Chrome for the Javascript code for the Adf application

  Hello

  I use JDev 11.1.1.7.

  In our application, I used the same code as in the example (http://www.oracle.com/technetwork/testcontent/27-long-running-queries-169166.pdf) adf code corner next.

  I used this code to my command button on my page.

  The problem is, when you run the application in the browser Chrome, clicking this command button displays a warning for javascript popup (Please find below printscreen).

  The application is not break and continues to work even if this popup comes.

  I tried with other browsers, it is works well and do not show this javascript error.

  You can all help to suggest? Is there something wrong with the javascript code? Thank you.

  Best regards

  cmoster

  Hi Timo,

  The problem is now resolved.

  We have corrected by adding these params of context in the web.xml file to work around the problem.

      org.apache.myfaces.trinidad.DEBUG_JAVASCRIPT

      fake

   

   

      oracle.adf.view.rich.profiler.ENABLED

      fake

   

   

      oracle.adf.view.rich.LOGGER_LEVEL

      OFF

   

   

      oracle.adfinternal.view.faces.DISABLE_CONTENT_COMPRESSION

      fake

   

  Best regards

  cmoster

• Javascript code necessary for the reset button to remove required fields

  I have a form with a reset button. I have check boxes that once verified will require some required fields on this form. When I hit the reset button, it will clear the text entered, but not the requirement on the fields. Is there a javascript code I can add to the reset button which will remove the requirements on a list of fields, and if so what would it be? Any advice would be greatly appreciated. Thank you.

  Just the property required of each field set to false:

  getField("text1").required = false;

  getField("text2").required = false;

  Repeat for all other fields

• Multiplication of JavaScript code for form Acrobat XI

  The value on the Textfield3 is the result of the multiplication of 2 x the added values in the Textfield1 or the Textfield2 separately.

  Please provide JavaScript code that performs this action.

  

  In this case the value in the Text3 will be 0.00

• Help with Javascript Code

  I have need of a few write him a fast JavaScript code. I have no experience in JavaScript, but enough to know what to understand. I'm helping to write a very simple writable document in Adobe Acrobat Pro. We need a code which would be specific when a checkbox is clicked on it auto fills with information in the other text boxes. In other words: If mailing address is the address of work so she fills out this information. I have included my variables with the correct names below.

  Thank you for taking the time. Can anyone help?

  I need something that will:

  If checkbox = 'On '.

  then 'employment Address1' = Address1

  then "employment Ville1" = Ville1

  then 'employment State1' = State1

  then 'Job postal Code' = Zip Code 1

  then 'employment County' = County1

  then 'job City, State Zip1' = city, State Zip1

  on the other

  If checkbox = "Off".

  each the first variables remains empty and accessible writing.

  Double readings:

  this.getField("Job_State1").value; = this.getField("State1").value;

  has a semicolon which it does not belong. The line should read:

  this.getField("Job_State1").value; = this.getField("State1").value;

  Then all of the code is:

  If (event.value! = "Off") {}

  fill in the fields of employment;

  this.getField("Job_Address1").value = this.getField("Address1").value;

  this.getField("Job_City1").value; = this.getField("City1").value;

  this.getField("Job_State1").value = this.getField("State1").value;

  this.getField("Job_Zip_Code").value; = this.getField("Zip_Code1").value;

  this.getField("Job_County").value; = this.getField("County1").value;

  this.getField("Job_City,_State_Zip1").value; = this.getField("City,_State_Zip1").value;

  else {}

  Clear fields;

  this.getField("Job_Address1").value = "";

  this.getField("Job_City1").value; = "";

  this.getField("Job_State1").value; = "";

  this.getField("Job_Zip_Code").value; = "";

  this.getField("Job_County").value; = "";

  this.getField("Job_City,_State_Zip1").value; = "";

  }

  You need to find how to set each field if only one is updated. The combined field may need to be updated by each field component. I use the blur action on and avoid using personal calculation action.

• Enter the JavaScript Code in JavaScript Action of link Annotation dictionary

  Hello

  It is for the plugin Dev with Acrobat SDK (XI) in C++

  having problem to get Javascript code into my cosdict of javascript action.

  (If you're wondering, yes I read the reference PDF and Acrobat SDK - livedocs, samples, and QAnywhere ^^ but I am new to Acrobat Dev and C++)

  I can't understand how to correctly create the dictionaries of the action (it was necessary for the subtypes "JavaScript" and "GoToE")

  and then re-branded to existing annotations (subtype 'link', old action is "URI").

  PDF reference, I would say I need to "S" and "JavaScript" key in my CosDict.

  If I just wrote: (myPDDoc is my open PDF Document)

  NewAction PDAction is PDActionNew (myPDDoc, ASAtomFromString ("JavaScript"));.

  PDLinkAnnotSetAction (annot, newAction);

  in Acrobat, can I get a link-JavaScript Annotation - but no code (this is why it is not included).

  If I try to build the dictionary I get a broken action or the same result without javascript code.

  NewAction PDAction is PDActionNew (myPDDoc, ASAtomFromString ("JavaScript"));.

  CosDoc myCosDoc = (myPDDoc) PDDocGetCosDoc;

  CosObj cosAction = CosNewDict (myCosDoc, false, 3);

  cosAction = PDActionGetCosObj (newAction);

  String jsText = "here comes my javascript code.   It comes to std::string

  CosDictPut (cosAction, ASAtomFromString ("S"), CosNewName (PDDocGetCosDoc (myPDDoc), false, ASAtomFromString ("JavaScript")));

  CosDictPut (cosAction, ASAtomFromString ("JS"), CosNewString (PDDocGetCosDoc (myPDDoc), false, jsText.c_str (), 0));

  newAction = PDActionFromCosObj (cosAction);

  PDLinkAnnotSetAction (annot, newAction);

  What is the correct way for the construction of the cosDicts action?

  Are there examples for these dicts. or linkAnnotations generally?

  Because the livedocs for textAnnotation example but not enough to linkAnnotation.
  

  OK Please forgive me, got the answer myself.

  CosDictPut (cosAction, ASAtomFromString ("JS"), CosNewString (PDDocGetCosDoc (myPDDoc), false, jsText.c_str (), 0));

  must be

  CosDictPut (cosAction, ASAtomFromString ("JS"), CosNewString (myCosDoc, false, jsText.c_str (), jsText.length ()));

  Feel a little stupid, had in mind that this number is optional and can be 0.

• How to use an if statement of javascript code

  Hello

  I have a lot of script transformation to search for text "signature of the employee" on each page in a multiple page and file for then the list in the console all pages that do not have the text of the "Signature of the employee" included.

  The script is still functional as one if statement must be included.

  Can someone advise please how to use an if statement in javascript code?

  var this.numPages = NUMPAGES;
  for (var i = 0; i < numpages; i ++)

  Search.Query ("Signature of the employee", "ActiveDoc");
  Console.println ("Pages that do not include a signature of the employee:" + this.pageNum + "");

  Any help will be most appreciated.

  "The signature of the employee" are the 2 words and not one. The method that you use to get the word gets only a single word. You also want to identify the "not true" found for the situation of the page and not the "real" found on the page.

  var ckWords; pair of words to test
  var bFound = false; Logical state of the words found
  Browse through the pages
  for (var i = 0; i)< this.numpages;="" i++="" )="">
  bFound = false; all found false
  numWords = this.getPageNumWords (i); number of words on the page
  loop through the words on the page
  for (var j = 0; j)< numwords;="" j++)="">
  get the pair of words to test
  ckWords = this.getPageNthWord (i, j) + ' ' + this.getPageNthWord (i, j + 1); test words
  do a check to see if the pair of words is string "Signature of the employee.
  If (ckWord == 'Signature of the employee') {}
  bFound = true; indicate the logical value found
  Console.println ("Pages that includes a signature of the employee:" + (this.pageNum + 1) +' ' "");
  break; no need to test more to this page
  } / / end of Signature of the employee
  } / / end of Word loop
  a test to see if the words not found
  if(Bfound == false) {}
  Console.println ("Pages that do not include a signature of the employee:" + (this.pageNum + 1) +' ');
  } / / end not found on the page
  } / / end of page loop

• How can I buy albums and or full albums and have them charged to my store credit?  I'm always brought to the family account for albums or "complete my album".

  How can I buy a track or "Complete my Album" and charged it to my store credit?  When I try both that I am brought to account family for approval.  I have no problem loading of individual tracks to my store credit and this happens only for Album or "Complete my album purchases.

  By "brought to the family for approval account" you mean...?

  As long as you're not the family Organizer then your balance should be automatically charged for the purchase - card organizer shall only be charged if your balance does not cover the price (plus applicable taxes), in which case the excess charge on their card. If you are being invited to enter the Organizer card security code, it does not necessarily mean that the card will be charged (even if a temporary store holding fresh can be applied, which the issuing company must automatically delete).

• I want to export a report to several pages to CSV using javascript code... Please suggest

  I want to export a report to several pages to CSV using javascript code... Please suggest

  Hi SubhajitChakraborty,

  If you are using Internet explorer as web browser, then confirm your request in Internet Explorer development Forums.

  http://social.msdn.Microsoft.com/forums/en-us/iewebdevelopment/threads

  If you use a Web browser to explore, then look for JavaScript communities to help.

• y at - it an update for mappoint for postal codes E20 to the Olympic Village

  Can someone tell me if there is an update for mappoint 2011 to include the postcode for Olympic Village postal codes the new E20

  Thank you

  Hello

  You can contact Microsoft Support for assistance on the question MapPoint.

  Technical support of Microsoft MapPoint

  http://www.Microsoft.com/MapPoint/en-us/support.aspx

• QML code completion?

  I just installed the QNX Momentics IDE and created a new project of "Hello World" of cascades. When I change the 'hellocascades.qml' I get no code completion.

  Who is wrong?

  It works for me .

  Hit results Ctrl + Space in a window to appear with a list of attributes can be defined for a given element.

  If this does not work then please reply back with some details of what is happening:

  (1) your operating system

  (2) the code and the location slider where you try to use the code completion/assits

• Missing code completion

  Hey guys,.

  I am developing a small application BlackBerry and after implementation of a

  development environment (Plugin v1.3, SDK6.0), I noticed that I don't have a code completion!

  It doesn't matter what configuration is required to make this work?

  coding without code completion is a little boring

  concerning

  mast

  JCarty thanks for your suggestion, in fact 'Java proposals' should be checked ON.

  After doing this, everything works perfectly!