Lenovo G560 INVALID INVALID, Lenovo SN system model
Hello
I have lenevo model G560
When I check ystem information it shows invalid model system and also the SN system as being not valid
The LENOVO system manufacturer
INVALID system model
System Type X 86-based PC
Processor Intel (r) Core i3 CPU M 380 @ 2.53 GHz, 2533 Mhz, 2 Lossnay, 4 logical processors
BIOS Version/Date LENOVO 29CN38WW (V2.15), 28/01/2011
SMBIOS Version 2.6
You will need to contact the Lenovo Support again and have them update the computer with this information.
Tags: Lenovo Notebooks
Similar Questions
-
Convert the function of transfer system model
It is a practice "IF convert to transfer function of CDT.vi" in the system identification toolkit, but is a VI to go the other way? I used the id of system tools to estimate the TF from my system, but I want to compare it to the base of the first order response of the system to my real stimulus data.
I can build a first TF command using the 'create order 1 model.vi CD' but I don't know how do to then turn this into a model of continuous system in which I can plug my real data.
I am able to build a model system using 'IF create system model.vi' but it is a polynomial model, if there is a way to cajole this in the form of an order of 1st exponential base, it would be a great solution as well.
(I'm experienced with LV, but my theory of control is rusty and I am totally new to CD modules and IF - then I apologize if this is a silly question)
Hello
You can use IF partially known continuous transfer (1st order) .vi model function and IF partially assess continuous known model transfer function (1st order SISO) .vi to estimate a 1st order TF, in which the parameters are defined as in CD create 1st order Model.vi
-
BlackBerry.System.Model return undefined
Hello
I have an application based on sencha touch 2.1 and I add the webworks inside lib.
When I try to get the device model using blackberry.system.model returning undefined.
But other api such as blackberry.system.softwareVersion, blackberry.system.name, blackberry.connection.type works fine.
Thank you & best regards
Arun
What operating system you test on? The model property is not supported in BlackBerry 10:
https://developer.BlackBerry.com/HTML5/APIs/BlackBerry.System.html#.model
However, we have an API community for this here:
https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10/deviceInfo
-
Service Manual for Lenovo Edge 15 model 80K 9 to replace the screen
I have and try to find a service manual or a repair for the 15 Lenovo model 80K 9 so I can replace a broken screen. I was not able to find a video or a PDF file that shows how to shoot this model so I can replace the screen.
Thank you
Matt
Good day and welcome to the community.
See your hardware manual: https://download.lenovo.com/consumer/mobiles_pub/lenovo_flex_2_pro_15_edge_15_hmm.pdf
Manual p. 50-58 in the face of the LCD Assembly and its components.
Does that help?
Kind regards.
-
Lenovo P780 system update does not work
Hi all
i, m using Lenovo P780 4 GB
at the present time the OS P780_ROW_S115_130807 worm
4.2.1 Android
I try update day but not workin after I download the update I chood update now, it will restart but nothing happen is like restart as usual, the update does not show
any idea or not can do to update?
Ok... You are grounded. Have you removed all the apps system? If you have done which causes the failure.
Did you also change the replenishment of stocks?In this case, the best way to go is to factory reset the phone and try again to OTA update. (If you have changed the rebuilding of inventories with a recovery of CWM or TWRP, factory reset will not help). You can also try the smart Wizard after the reset.
Important: Please ensure that the download and dosent of process (update) install get interrupted!
Let me know how it goes.
-
Invalid item in System Messages ID
Hello
We went to 11.1.2.1 about 3 months ago and all recently I noticed something in occurring during the system messages and more and filling up the HsvEventLog.log to the point where there are so many lines, it can not be displayed on the web. Here is a copy of the error message. I have a ticket with the support of Oracle, but they were unable to help so far. I don't think it's responsible for problems with the system, but is a constant nuisance. Any thoughts would be appreciated.
Thank you
Jason
Details of the error of the System Messages:
Error code: {FF362A40-964D-46D9-91BD-8C67E7E37337}
Summary of Message System
Invalid item ID.
Details of the Message System
Error reference number: {FF362A40-964D-46D9-91BD-8C67E7E37337}
NUM: 0x8004023b; Type: 0. DTime: 2011-11-09 04:09:49. SVR: NAHQAPP40; File: CHsvDSData2.cpp; Line: 11124; Worm: 11.1.2.1.000.3082;
Here's the info from HsvEvenLog:
Error * 11 * s_hfm * 04:09:50 * CHsvDSData2.cpp * Line 09/11/2011 11124 * <? XML version = "1.0"? >
< C'estr > < Ref > {FF362A40-964D-46D9-91BD-8C67E7E37337} < / Ref > < AppName > GCCons < / AppName > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2147220933 < / Num > < Type > 0 < / Type > < DTime > 09/11/2011-04:09:49 < / DTime > < Svr > NAHQAPP40 < / Svr > < file > CHsvDSData2.cpp < / file > < line > 11124 < / line > < worm > 11.1.2.1.000.3082 < /. Worm > < / CSEC > < / C'estr >Hi JDN,
This is reported as a BUG and fixed in version 11.1.2.2.
Please find below the details of the BUG:
Bug 12876553: NEED of OPTION ON ON / OFF FOR log 'INVALID ELEMENT ID' ERRORHope this helps,
Thank you
Charles Babu J -
Hi all
I'm stumped by a problem with my model. I used this model for many years (on dreamweaver MX) without problem, and now maybe after update dreamweaver CS5, I get these yellow highlights (WARNING: invalid code) on a few links in my model (see code below). Note that these are related to a document URLS. Just below each yellow highltighed code, there are links with a similar path structure that the DW highlight!
So the question is when this template is applied to a page, these links highlight becomes the absolute URL (file:///...) to my local PC, even after I have save my page on the site. This happens for links that are not marked as yellow, they remain as the relative paths to the document - which is the behavior that you expect.
The structure of my site is a folder models with only files .dwt in them. I included a picture of my site structure if it helps.
Any help is appreciated!
And extract of code here:
I'm stumped by a problem with my model. I used this model for many years (on dreamweaver MX) without problem, and now maybe after update dreamweaver CS5, I get these yellow highlights (WARNING: invalid code) on a few links in my model (see code below). Note that these are related to a document URLS. Just below each yellow highltighed code, there are links with a similar path structure that the DW highlight!
So the question is when this template is applied to a page, these links highlight becomes the absolute URL (file:///...) to my local PC, even after I have save my page on the site. This happens for links that are not marked as yellow, they remain as the relative paths to the document - which is the behavior that you expect.
I don't think that the problem is related to the URL.
The first error highlighted is a tag for which closing is inside an Internet Explorer conditional comment (CICE) that DW does not see:
I think that the second error is DW attempts to match the of the first error.
The remaining errors seems to repeat the same pattern.
You must balance your ... tags on IECCs.
HTH,
Randy
-
Satellite Pro L300 - 27H: number invalid would be and model
The school that I work for bought recentley 32 laptops from Toshiba Satellite Pro L300 - 27H.
All laptops have been saved for the extended 3 year warranty and Cashback 2010 promotion.
One of these laptops has now developed an error and needs to be repaired under warranty.I tried to do it via the website of Toshiba, but the system refuses to accept the serial number or model number of the laptop, saying there are not valid.
I sent support in this regard, but had so no response or ackknowledgment.Anyone know why this model is not listed?
John
Hello
If the laptop needs to be repaired, I recommend you get in touch with the local ASP in your country.
The authorized service provider might be able to help you don t send or wait for the mails, but call the guy. It s a common number is your country.Here you can find the ASP, responsible for you:
http://EU.computers.Toshiba-Europe.com-> supported downloads &-> locate an authorized Service partnerGood luck
-
I woke up this morning and turned on my computer. He won't go to the connection as it does normally, but instead, I went to system rescue 3.0 page. I don't know what it means on my computer. I didn't hit any button at startup to the top at all. I thought that my computer has a virus so I did the onekey recovery but I can not yet the chance to my login page. It will only open to the resue system. Any help please?
I could completely, restart the system and leave it alone for an hour, not it works
-
Update system-model and serial number in the BIOS on T61
Hello
We just changed the motherboard on a T61. After Windows XP starts, we would like to launch ThinkVantage SystemUpdate
little, it cannot identify the T61 properly because the system Type is not correct in the BIOS.
In the past, we were able to update it for example on the server X-Series starting with a BIOS update diskette
and typing the correct values.
How do I change them on a T61?
Thanks in advance
Welcome them
Chakoe
You will need the maintenance disk. It is only available to our technicians on the ground, technicians deposit and trading partners IBM/Lenvo. We are NOT allowed to discuss this for security reasons. Hope you understand.
If you are a business partner, you are more than welcome to go to the website of Lenovo business partners or contact them by phone for help with this question.
Kind regards
Mark
-
I am the 2nd owner of computer and appears as former owner had installed a Dell on this HP operating system. would be OK but drive hard contains of disk errors that Windows cannot fix. Leading to intermittent shutdowns and all kinds of fluctuations to get a Win 7 upgrade disk to restart Windows. HP does not sell the RRD more. I'd be willing to pay for the discs, if someone has a set of left.
Hello:
Most of the dc5800 comes with Windows Vista Business or Vista Business downgraded to XP Pro, like yours, so HP has never had recovery disc for the dc5800 W7.
https://h10057.www1.HP.com/ecomcat/hpcatalog/specs/provisioner/05/KA404UT.htm
You call this number (USA/Canada) to see if HP recovery Vista Business left discs?
Demand for 64-bit because otherwise you will get 32 bits.
1-800-334-5144
If they do not, you can still get a set of this provider not HP - looks like only 32-bit however.
You can call and ask if they have Vista Business 64-bit games.
-
Right, I'm wanting to upgrade my ram and graphics card, but I am struggling to understand what I put in and what I can't. I also wouldn't mind research in a new soul who currently use a vpro intel Intel (r) Core (TM) 2 Duo CPU E6750 @ 2.66 GHz, 2660 Mhz. I just want to eventually play some games, but nothing heavy and do some light video editing again once nothing to heavy. Any help would be amazing.
Here is the complete information of the system:
Name of the Microsoft® Windows Vista™ operating system business
Version 6.0.6002 Service Pack 2 Build 6002
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
USER-computer name
System manufacturer Hewlett-Packard
Model HP Compaq dc7800p Small Form Factor system
System Type X 86-based PC
Processor Intel (r) Core (TM) 2 Duo CPU E6750 @ 2.66 GHz, 2660 Mhz, 2 Lossnay, 2 logical processors
BIOS Version/Date Hewlett-Packard 786F1 v01.27, 11/04/2008I would also like to pass well ten Windows. Thank you
Hello:
For a video card, I recommend the AMD Radeon HD 6450 half-height card, which works perfectly with the 240W power supply in your PC.
Make sure that you get one that includes low profile brackets in the area.
Memory... you can install a maximum of 4 x 2 GB memory PC2-6400 for your model if you are running a 64-bit operating system.
I have used this brand in my dc7800 CMT. I bought 2 games and maxed out.
http://www.Newegg.com/product/product.aspx?item=N82E16820231207
Processors... Mine came with the E8300, so I didn't change that.
Here is the link to the quickspecs for your PC. You can find taken processors supported on page 9.
-
However, as it's an exdisplay I don't have books or CDs and do not have a backup disk. How can I fix my blue screen? When I can not open in Safe Mode, I clearly need a VISTA installation disc but how can I get on these without having to buy AGAIN
Hello tamster2708,
Whatever your machine a display model of the manufacturer "must" give you an option to restore your PC to factory conditions. This is done in two ways. (1) a Windows DVD is provided. (2) the operating system is on a hidden partition on the hard drive of the system. Chances are yours is this one.
As you have no literature tell you what keys press when to start your machine which will allow you to access the recovery partition, I suggest you to contact the store you purchased your machine from and to ask their technical support how are you suppose to go on the restoration of your machine to factory conditions.
You might alos visit PC manufacturers Web site and look to the top of the brand and the model of your machine, just in case they have a downloadable guide. If you can download a user guide, browse and search for "restoring your PC back to factory conditions" this will then tell you how to restore program.
If your machine is not a copy of the operating system on a hidden partition then ask the shop how you are going to get an OS DVD, ensuring that you point out that 'they' should have provided a way for you to restore your system should any problems arise.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
Deactivation of the system model 2000-2d27CL "69555780".
It's my mother's laptop. The dogs were running around in his bed and he detached his knees now it gives me system off. Wanted for about an hour on the forum but could not find the admin password... Any help much appreciated. Thank you!
@ Disabled System Code is '69555780 '.
Enter 76433306
Kind regards
DP - K
-
HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.
You need an external DVD drive to get the repair will.
Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.
The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.
A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.
Maybe you are looking for
-
Portege M200: Start-up of the SD in HDD external
"M200 Recovery using the floppy disk or SD cardPosted the: August 15, 2005 10:36I am posting this in the hope that it will help other people seeking to use the CD/DVD recovery, but without a bootable CD. I want to thank the Toshiba of TabletPCBuzz.co
-
Can we install Windows MCE 2005 on Qosmio G20
I want to improve my operating system from Windows XP to Windows XP MCE 2005 is there a way to do it. Help, please
-
DSC 8.5.1 incompatible with already installed products
I try to install DSC 8.5.1 on a Windows XP with LabVIEW 8.5.1 system and already installed 8.6.1. When I try to install the DSC module, the installer tells me that the module will not install because "this function is incompatible with the products a
-
Model: G62-229NR: change forgotten administrator NEEDED for F10 BIOS password at startup
I have a HP G62-229NR laptop running Windows 7 Edition home premium that I forgot the ADMIN password and can't get into the BIOS Setup, it was my wifes computer, and I lost two years before, I continue to use this computer because it makes me feel co
-
Print error 5200, MX340. Tried all the measures to correct
Can someone give me one answer other than to unplug and restart?