For Laserjet Pro P1102w driver on the HP website does not exist. Most recent is corrupt.

Similar Questions

• LaserJet P3010: Cannot install the printer. The print processor does not exist

  I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...

  Problem solved. Use another port.

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Save for precedent: the "Attachment" object does not exist in the previous version

  I'm trying to save a very simple VI from LabVIEW 2013 SP1 to LabVIEW 2009 but I get this strange error.  The VI contains only basic ex that are available in all versions of LabVIEW (shift logical AND Select,<=, u8). ="" when="" i="" try="" to="" save="" it="" for="" labview="" 2009,="" it="" gives="" me="" the="" following="">

  Missing object.  The "Attachment" object does not exist in the previous version.

  I thought first of all it had to do with being possessed by a lvclass, but even after that I removed the class (and unplugged from the lvclass) it always gives me this warning.

  When I try to open it with 2009, it will fail to load the schema-block (error 6).

  The next thing I tried was to copy the block diagram for a new VI and re - create the connector pane, but that doesn't change anything.

  Any ideas?

  Maybe "attachment" made reference to an attached comment (the arrow of a free label for an object on the diagram). I don't expect the presence of attached comments to cause a SFPed VI to not open, but it's the only thing I can think of. Try to remove any comment attached to your diagram and SFPing and see if that solved the problem.

• error 1075 the dependency service does not exist or has been marked for removing windows xp

  The DHCP Client has stopped, but it is configured to start automatically.  When I try to reboot, I get the following message: error 1075 the dependency service does not exist or has been marked for deletion.  I need help to solve this problem.  Because of this problem, I can not connect to the internet.  My connection continues to try to acquire a network address and I lost my IP address.  I need help to fix this error on my Windows XP machine.  Thank you!

  See if this article solves your problem:

  "Error message when you start the DHCP Client service on a Windows XP-based computer:"error 1075.
    <>http://support.Microsoft.com/kb/915162 >

  HTH,
  JW

• error 1075 the dependency service does not exist or has been marked for deletion

  Im trying to find solutions for this error with windows vista. The only solutions with microsoft in the VISTA section is for xp machines. Go figure. Im trying to reboot the Client DHCP service and this is the error I get. (error 1075 the dependency service does not exist or has been marked for deletion). I tried to fix the registry key to match a working vista machine, but it did not work. This is the registry that I corrected. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP

  Just delete the registry entry and restart the system. It should work perfectly. It worked for me.

  1. Click Start, click run, type regedit in the Open box, and then click OK.
  2. In the registry editor, find and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP
  3. Right click on the entry DependOnService , and then click remove instead of change

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Group Policy infrastructure failed due to the error below. The specified domain does not exist or could not be contacted.

  using several Windows 2003 domain in an attempt to push the msi using Group Policy is following on xp sp3 machine error

  Group Policy infrastructure failed due to the error below.
  The specified domain does not exist or could not be contacted.

  Note: Due to the GP Core failure, no other component processes Group Policy policy.  Consequently, status information for the other components are not available.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Forums. Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• C7280 Installation error: the specified service does not exist as an installed service

  All,

  I have an AIO C7280 printer that is connected wireless to my router.  I have a pc (Vista) cable and a laptop wireless (XP) connected to the router as well.  I have no impression of question from the pc.  However, when I try to install the driver on the laptop I get an error just after that he asked me if it's a USB drive or a network printer.  I chose the network and the error appears saying "the specified service does not exist as an installed service.  I ping the printer from the laptop so I know it can 'see '.  I don't know what to do.  I have uninstalled/reinstalled several times without success.  Can anyone help?

  Thank you.

  Edit for more information:

  After building a log of installation failure and 'details', that's what I see:

  Error Situation code: 20364041

  Now Launching = X:\hpzdui01.exe - gateoncmdline easyinstall | XXX f X:\hpoins21.dat-valider No.

  LaunchNetworkInstall retrieves the value unexpected 1060

  RUN: 50 return stops Driver UI plugin

  Exit code = 50

  Message edited by gatorman on 09/18/2009 16:57
  Message edited by gatorman on 09/18/2009 17:10

  The service that the error message refers is the HP network devices support service. Try this...

  Open the contents of the installation CD, and then open the file "setup." Now you will find either a folder named 'netdevicemanager' or simply 'network '. Open if it is present. Now there should be a file with the same name as the file, but with extension .msi. Right-click on this file and click on uninstall. If you get a message stating that the action applies only to products that have been installed, and then click OK. Restart the computer IF necessary. Now, right-click on the file and click on install. Installation do not normally present a window of 'success' You will just see a bar of progress for a few seconds and disappear. Once this happens, restart the PC and check if the HP Network Device Support or similar service appeared in the list of services. If Yes, then reinstall the software, and it should install correctly.

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• "Windows cannot connect to the printer. The print processor does not exist.

  I am trying to connect to a printer on my home network.  LaserJet 1020. Who lives on a different computer on windows 7.  It works fine on his 'home' of that Win 7 cannot connect to the printer. but when I try to network I get this message.  "Unable to connect to the printer. The print processor does not exist.  I downloaded a new driver from HP without success.  All of the suggestions.  Thanks in advance.

  Print processor which is using?  Properties of the printer, Advanced Print processor.   See if changing to wil Winprint allow the connection of the printer. Note the current so you can change back if required. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Family safety has blocked me and said the requested page does not exist, moved or is temp down.

  Original title: parental control

  Family safety has blocked me and said the requested page does not exist, moved or is temp down. Help me!!

  Hello April,

  Thank you for the information. For us to better visualize your main concern, please provide a screenshot of the message/code that you receive when you click on the family within your computer settings. To take a screenshot, you can follow the steps in the link/s below:

  • For XP
  • For Vista/Windows 7
  • For Windows 8

  I got a private message where you can securely download the screenshots. After downloading, please respond to this public thread for us to be warned.

  Visit us for your answer.

  Thank you.

• The specified service does not exist as an installed service. (Error code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  The name of your what appears?

  Error 0 x 80070424   See: http://support.microsoft.com/kb/968002

• Error failed with error 0 x 80070424: the specified service does not exist as an installed service.

  I have DSL and a wireless printer that work well when the system starts; EXCEPT the desktop icons disappeared so I can't manage them! If I stop DSL through the system icons, I get the following error messages when I try to restart or to solve problems: do you know what are the services that I need to install/reboot?

  Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  Diagnosis of last run time: 16/05/12 16:09:47

  Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn	HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
  warn	HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
  warn	HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
  warn	FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
  error	Could not make an HTTP connection.
  error	Could not make an HTTPS connection.
  error	Could not make an FTP connection.

  Thanks for your attempt to solve my problem.

  Curiously he solved my problem of network while solving what has proved to be a problem with the firewall of Windows (see below): who knew?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Security/Windows-XP-Security-Service-Center-error-1060-and/1476c2b6-8161-4ccd-a69f-93292b5152da