For 'Post online', these files can be exported to another server?

Similar Questions

• I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that no such interface supported.

  I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that: {26EE0668-A00A-44D7-9371-BEB064C98683} not this interface supported...

  Hi MAMARDA,

  Welcome to the Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Windows 7 use you?

  (b) what is the exact error message you are getting?

  Method 1: You can also try to perform a file system (scan SFC) verification tool. This tool will fix the system files are corrupted.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  Method 2: If this is a recent problem that has developed you can try to perform a system restore and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Method 3: you can try to start safe mode and restore the system, if you are unable to do it in normal mode.

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  When you are in safe mode, follow the steps mentioned above to complete the restore of the system.

  Hope the helps of information.
  Please post back and we do know.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photos modified in Photoshop then saved, PhotoShop or Mac doesn't give the photo a file extension, and these files can not reopened.

  Photos modified in Photoshop then saved, PhotoShop or Mac doesn't give the photo a file extension, and these files can not reopened.

  I use a mac with PhotoShop CC and have experienced a problem during the recording of pictures once I've retouched in Photoshop. If I open a RAW or DNG file in camera RAW, or a TIF or JPG created in Lightroom in Photo and then change the file, everything looks OK. When I came to save the RAW as a TIF or JPG, or a TIF or JPG saved previously, or DNG PhotoShop or Mac file does not give a picture of a file extension.

  These files cannot be reopened by myself in PhotoShop to be re-edited or opened by someone, I send the photos to use them or for them to print. Also, when I try to load these pictures on a website they are not recognized and rejected. Adobe Bridge recognizes the file in the format that I saved and saved in the metadata window file format, but does not show a file extension.

  So far to solve the problem I had to export the file with the < file > < Export > function, otherwise I do not use PhotoShop like my photo editor. Export gives the file saved a file extension.

  I use a Pro-impression who explained I had sent her one of these files without file extension and it is not able to open, edit, print, or save the file. My printer also explained that he experienced this problem on several other occasions.

  Can Adobe indicate what changes you made and how to overcome this problem please?

  Ian

  Hello

  On a Mac, go to Finder > Preferences > advanced > (select / click) see the any file extension. (might help)

  Stone

• The content of these files can be deleted?

  The content of these files can be deleted?

  In the Finder, and then to the library I have two files, one is called caches and cookies to others.  What is inside them can be deleted?

  I have an iMac running macOS Sierra 10.12.

  Thank you

  Select this option.

  There are actually several 'library' files in the Finder and it is better that you don't mess with them.  Most browsers have ways to delete the cookies in the browser itself and adjusting the size of browser cache.  Caches speed up the operation of the computer, and unless you have a specific problem, you have not and should not, remove them.  At best he probably will do nothing, and at worst you may have to reinstall your operating system.

• I would like to work with DICOM files, so I can buy Photoshop CS6 extended. A TIFF file can be exported from a DICOM file in Photoshop CS6 Extended?

  I would like to work with DICOM files, so I can buy Photoshop CS6 extended. A TIFF file can be exported from a DICOM file in Photoshop CS6 Extended?

  Yes.

  Mylenium

• export to another server

  Hello
  10g R2 on UNIX, I can export to another server (physical machine):

  exp userid=user/pwd@db tables=MYTABLE FILE=myfile LOG=anotherserver.smtng.com:/home/oracle/MY_LOG
  
  
  
  Export: Release 10.2.0.4.0 - Production on Tue May 31 13:09:12 2011
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  
  EXP-00028: failed to open anotherserver.smtng.com:/home/oracle/MY_LOG for write
  EXP-00000: Export terminated unsuccessfully

  How?
  Thank you.
  
  PS: I use scp to copy the file:
  SCP anyfile anotherserver.smtng.com:/home/oracle/

  user522961 wrote:
  Hello
  10g R2 on UNIX, I can export to another server (physical machine):

  exp userid=user/pwd@db tables=MYTABLE FILE=myfile LOG=anotherserver.smtng.com:/home/oracle/MY_LOG
  
  Export: Release 10.2.0.4.0 - Production on Tue May 31 13:09:12 2011
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  EXP-00028: failed to open anotherserver.smtng.com:/home/oracle/MY_LOG for write
  EXP-00000: Export terminated unsuccessfully
  

  How?
  Thank you.

  You can set your source database tns entry and start "exp" on the remote server (target)?

  tables userid=user/pwd@db exp = FILE = myfile LOG MYTABLE = MY_LOG

  Concerning

  Grosbois

• "These files can not be opened","your internet security setting prevented one or more files being opened.

  I followed aid guidelines that provided me by windows, but it does not solve my problem,

  I'll click on Device Manager and I get this error message which is "Can't open these files", "your internet security setting prevented one or more files being opened.

  I have tried everything that windows told me to do but without success!

  I click on options internet and changed levels of security around but yet once, without success! Does anyone have an idea?

  Thank you very much for the support, I thought of a solution, I bought Windows 7, I installed it on a partition again and fortunately I no longer receive errors

• I want to map a drive of google as a network drive for copy and move files stored on a drive different server periodically. It is said

  invalid folder. How can I do this on Windows Explorer, longer aged and on my RT of Area2 8.1

  Hello Andrea,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This can happen due to some problems of synchronization with the disc you are trying to map.

  I suggest you use the "subst" command to map a folder as drive letter. Please follow these steps:

  a. type cmd in the start search box.

  b. right click on cmd in the search results, then click on run as administrator.

  c. type the following command at the command prompt and press ENTER.

  subst g: "c:\users\username\Google Drive".

  Additional information:
  https://support.Google.com/drive/answer/2565956?hl=en

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Tablespace can be migrated to another server withou t

  We lost our Oracle 10 g software disk partition which also contained the control files, repeat the tablespace newspapers and users, among others. Other files in the tablespace on different disks are intact and I move/add these files to the tablespace to an installation of Oracle 11 g. Is it possible to install a new tablespace definition less than 11g and 'restore' the 10g tablespace files?

  I have spent a lot of time reading about RMAN commands to move the tablespaces, but have not found the right combination of commands. Can you point me in the right direction or tell me that it is not possible to move a tablespace in this way?

  Thanks for any help you can offer.

  user4487126 wrote:

  We lost our Oracle 10 g software disk partition which also contained the control files, repeat the tablespace newspapers and users, among others. Other files in the tablespace on different disks are intact and I move/add these files to the tablespace to an installation of Oracle 11 g. Is it possible to install a new tablespace definition less than 11g and 'restore' the 10g tablespace files?

  I have spent a lot of time reading about RMAN commands to move the tablespaces, but have not found the right combination of commands. Can you point me in the right direction or tell me that it is not possible to move a tablespace in this way?

  Thanks for any help you can offer.

  Sorry, not possible.  A given data file belongs to a database at a given level of version.  There is information in the file header that identifies it as such and is verified when the file is opened by the database instance.  You can't just take a file from a database and willy nilly plug it into a different database - especially one from a different version - especially if, as it looks - the data file wasn't closed properly because the database instance has crashed.

  So... what the status of your backups, server and database... levels?

• Retrieve a data file from a backup on another server

  Hi all
  
  I usually take backup hot data files to a different like that server because I don't have enough space in the same server. I have
  
  SQL > alter tablespace XXXX begin backup;
  SCP/bu1/oradaTA/XXXXX/XXXXX host [email protected]: / db1dw/oradata/backup/dec2010/XXXX
  alter tablespace end OPS backup;
  
  If I want to recover the datafile can I normally do the drop offline from the data file and copy the backup data file that is located in differnet thorugh scp server and check the online data file? and the database is in archivelog mode, but I dislike abt log files. I just need to recover the data file as the last backup.
  or do we have to use all the controls recover datafile? If need to use everything recover datafile command go where it will recover the data file?
  
  I have not any backup or restore script, I just manually PCs from data files.
  
  Help please, thanks in advance...

  It is a ' user backups managed by "in the terminology of the Oracle.
  The database does not care how you copy (backup or restore) the data file from a backup location. So, you can use scp to copy the backup to the backup file.
  HOWEVER , you can recover only a datafile to the single point of the backup. Given that the rest of the database (i.e. all the other data files) have advanced further, you must RETRIEVE the DATA file and apply all ArchiveLogs since this backup of data file point to the current point (i.e. recovery would be until it again online that would apply automatically).
  Therefore, if you have had the "transactions" (e.g. deletions) against this tablespace, they will be replayed.

  Hemant K Collette

• A Dreamweaver file can be exported to the Muse of editing?

  Export a file Dreamweaver.htm for Muse?

  I don't think so.  Muse is not an HTML editor.  You can have the best chance to create a new page in Muse and then copy and paste text from your page of DW in your page of Muse.  Either way, if you decide to use the Muse, you should plan on used during the life of your site.  You cannot switch back & forth between Muse and other HTML editors.

  Nancy O.

• Help Pages for a great thesis - it can he manage?

  I just bought a mac in February this year and downloaded MS office.  I had to continual problems with Word - error messages when I go to save as there is an error on startup disk can not save or there is a serious disk on the job file error and I have to save a new copy.  Temporary files remain in the Finder all my Docs.

  MS Office looks at the console logs and says Word uses a huge amount of CPU (I have loads of disk space left btw) and thought it was an error in the coding of the finder of sense of startup disk did not know where to put temporary files and was not to delete when the doc is closed - so to publish a mac.

  Apple when they finally decided to support said to do a reinstall of the iOS.  I did and the problem seemed to settle.

  However, I am coming for the final stretch of a major wholesale and I don't know if I can trust MS office on Mac - even if I think it's basically my mac is the question. Of course Apple worry at all because it is MS Office and does not give me a replacement even if they said there must be problems with the disk or the iOS, I had was corrupted - so it is the Mac.  Stock of health equipment but frankly, someone needs to make a correct diagnosis. Apple do not seem to do this more so less impressed in the care of apple product.  At least with windows machines they take repair and return!

  If someone has already tried to use Pages to write a lengthy document which will contain a lot of setting in shape?  Risk of you using MS Word to this moving forward?

  I think of buying a laptop not expensive windows as backup - which seems a ridiculous gesture after spending all that money on the mac. But don't take risks and cannot count on apple being a support.

  What will be the reviewers will use, MS Office or Pages? I would write my paper using the same tools that the examiners/graders will use. You said there will be a lot of formatting, this is a signal of the course there are incompatibilities between products and even products versions when viewing your work.

  And, given that there may be other problems with your computer that I save at least often on an external drive. Make sure that you manage frequent backups of your work. If it were me, I would have my computer professionally checked before relying on it for such an important project.

• Windows security - these files can be harmful

  Recently, this annoying pop up has been appearing everytime I try to open some shortcuts or move a file/shortcut to another folder. It has never happened before and has only recently begun. I'm not on a home network or something similar, I have reset the settings of internet explore (even though I never touched it). I also tried to enter a command prompt to restore the integrity level way, everything and nothing works. How can I get rid of this pop up, and what may have caused it?

  I would be grateful for any help on this problem.
  Thank you
  Jean-Marie Ilakkiyan
  P.S This warning of 'Security' is a not warned me of "potential threats" before, and it even appears for some very safe and verified files.

  Edit: Found a fix:

  Looking for a 'false' desktop folder in C:\users\yourname\favourites. Right click > properties > location > move to and select the 'REAL' office located in C:\users\yourname folder.

  Hello

  1. what security software is installed on your computer?

  2. do you have active Windows Defender?

  3. did you of recent changes to the computer before this problem?

  4. What if the problem occurs with all the shortcuts?

  This could be the work of the security software installed on your computer.

  Since you do not know that the files are safe, the best option here is to disable windows defender if it is enabled and all other security software that are installed on the computer temporarily and perform the operation again.

  For Windows Defender, see article below.

  Enable or disable the Windows Defender
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Defender-on-or-off

  Note: Be sure to activate security software once you have completed the steps above.

  It might be a virus infection, of security Microsoft Scanner or use the antivirus installed on your computer completely software scan the computer and check if it detects anything.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Please return to the State of the question.

• How to scan to a computer, for example, provide a file can I send an email?

  1. name and number: HP Photosmart C7280 all-in-One printer Fax Copier Scanner

  2. installed OS: Windows 7 64-bit

  3. error message: no Scan option (refer to the device documentation for troubleshoot) don't get on the LCD of the printer after I press menu followed by Scan to Scan to computer

  4. all changes made to your system until the problem occurred: I have not tried to do this function since I upgraded from Vista to Windows 7 form, then yes a chang was made.

  5. in the title of the topic, include a brief and accurate description of the problem and your product information (e.g., the product name of your laptop, laptop computer, printer or other device, etc.): I have desktop computer is a HP Pavilion m9040n

  I hope to hear from someone soon with a solution.

  Thank you

  Richard Sandige

  You must reinstall the software and drivers on HP website.  Try now.

• Is it possible that the encrypted file can be read on another computer?

  Original title: can I send encrypted file

  Hello!

  I just want to know that in windows 7, if I've encrypted by bitlocker and I sent this file that is located on the bitlocker drive after opening it by entering the password by car. so if I send this file to anyone, may be able to read this file? pls let me know this.

  Concerning
  Fahed

  Here is a very quick way for you to discover:

  1. Create a Hotmail account.
  2. Send the file to this account.
  3. See if you can open it.

  Your question suggests that you are not completely familiar with BitLocker. If Yes, then you must run this very simple test that many people forget to run:
  1. Pretend that your hard drive crashed this morning. It is now completely illegible.
  2. Take your backup drive to another PC and check if you can open your encrypted files.

  If you can't, you must review your backup strategy and how to treat the encrypted files.