For the last 12 months from the date of entry

Similar Questions

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• How can I get the lines for the date between 2 different days

  Hi all,
  
  How can I get the lines for the date between 2 different days.
  
  Sample data:
  Table name: Articles
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  Title 3 2011-08-21 08-21-2011
  title4 2011-08-28 2011-09-11
  
  Result will be:
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  title4 2011-08-28 2011-09-11
  
  This is my example query:
  SELECT * FROM items WHERE trunc (es.date_start) > = TO_DATE('2011-08-22', 'YYYY-MM-DD') AND trunc (es.date_end) < = TO_DATE ('2011-08-28', 'YYYY-MM-DD')
  
  but I can not get the expected results. Any help would be much appreciated.
  
  Thanks in advance

  not read your question properly before...

  Please try this

  Select * FROM items
  WHERE (TO_DATE ('2011-08-22', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end)) OR
  (TO_DATE ('2011-08-28', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end))

• Where that we manage for the display and entry date formats

  the specification of the user that is displayed as DD-MON-YYYY dates. Is there a config or properties file that contains the date format for display? Is there a drop down calendar which can be positioned next to an input field to date for a question on a screen?
  Thank you
  Allan

  Hi Allan,

  Just had a look at this takeover bid 10.1 on my machine.

  I noticed that for an attribute date as on a screen, when you use Input type = Year, Month and Day edits (in the file screens), it seems to display the three drop-down lists in the same order (day, month, year), regardless of what's been defined in the configuration line "input-date-formats" in messages. file .properties (locale).

  However, I was not sure of your email if the DD-MON-YYYY format was necessary for the entriesto date, or just for the display of date output. If the latter, then using the following in your messages. (place) .properties file...

  output-date-format = yyyy-MMM-dd
  

  ... will translate dates displayed like this: 1980-Jan-27

  To force the OWD to accept only dates of entry of user in the format '1980-Jan-27' then you can edit the line input-date-formats of configuration:

  input-date-formats = yyyy-MMM-dd
  

  ... However, it is rare to restrict the dates of entry into a single format. As you will see in the messages. (locale) .properties file entry-date-formats is set to a combination of common entry to the regional settings date formats, in addition to the ISO international date format (YYYY-MM-DD, e.g. 1980-01-27).

  See you soon,.
  Jasmine

• Unable to display data for the date where there is no entry in the table

  Hello
  
  I need a urgent, described below:
  
  I have a table named as 'dirty', consisting of three columns: empno, sale_amt and sale_date.
  (Please ref. The table with data script as shown below)
  
  Now, if I run the query:
  "select trunc (sale_date) sale_date, sum (sale_amt) total_sale of the sales group by order trunc (sale_date) by 1.
  It then displays the data for the dates there is an entry in this table. But it displays no data for the
  date in which there is no entry in this table.
  
  If you run the Table script with data in your schema, then u will see that there is no entry for the 28th. November 2009 in
  sales table. Now the above query displays data for the rest as his dates are in the table of the sale with the exception of 28. November 2009.
  But I need his presence in the result of the query with the value "sale_date' as '28. November 2009 "and that of"total_sale"as
  « 0 ».
  
  Y at - there no way to get the result I need?
  
  Please help as soon as POSSIBLE.
  
  Thanks in advance.
  
  Create the table script that contains data:
  ------------------------------------------
  
  CREATE TABLE SALE
  (
  NUMBER EMPNO,
  NUMBER OF SALE_AMT
  DATE OF SALE_DATE
  );
  TOGETHER TO DEFINE
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (DECEMBER 1, 2009 10:20:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 30, 2009 10:21:04 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 29, 2009 10:21:05 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 26, 2009 10:21:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 25, 2009 10:21:07 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 5000, TO_DATE (NOVEMBER 27, 2009 10:23:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 4000, TO_DATE (NOVEMBER 29, 2009 10:23:08 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 3000, TO_DATE (NOVEMBER 24, 2009 10:23:09 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 2000, TO_DATE (NOVEMBER 30, 2009 10:23:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 7000, TO_DATE (NOVEMBER 24, 2009 10:24:19 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 5000, TO_DATE (NOVEMBER 25, 2009 10:24:20 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 3000, TO_DATE (NOVEMBER 27, 2009 10:24:21 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 2000, TO_DATE (NOVEMBER 29, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 1000, TO_DATE (NOVEMBER 30, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  COMMIT;
  
  Any help will be necessary for me
  
  
  Kind regards

  WITH tab AS
    (SELECT TRUNC(sale_date) sale_date,
      SUM(sale_amt) total_sale
       FROM sale
     GROUP BY TRUNC(sale_date)
     ORDER BY 1
    )
   SELECT sale_date,
    NVL(total_sale,0) total_sale
     FROM tab
     model
     REFERENCE refmodel ON (SELECT 1 indx, MAX(sale_date)-MIN(sale_date) AS daysdiff , MIN(sale_date) minsaledate FROM tab)
       dimension BY (indx)
       measures(daysdiff,minsaledate)
     main main_model
     dimension BY (sale_date)
     measures(total_sale)
     RULES upsert SEQUENTIAL ORDER ITERATE(1000) until (iteration_number>refmodel.daysdiff[1]-1)
     ( total_sale[refmodel.minsaledate[1]+iteration_number]=total_sale[cv()] )
  ORDER BY sale_date
  

  using a clause type

  Ravi Kumar

• How to write a query for the data exchange between two columns?

  How to write a query for the data exchange between two columns?
  
  I tried a request, does NOT work.
  

  update tmp t1 set t1.m1=t1.m2 and t1.m2=(select t2.m1 from tmp t2 where t2.student_id = t1.student_id)

  Thank you.
  
  Published by: user533361 on October 23, 2009 14:04

  Just plain and simple:

  update tmp t1
   set t1.m1=t1.m2,
       t1.m2=t1.m1
  /
  

  SY.

• SQL error: ORA-01840: value not long enough for the format of the date of entry

  It is a delete SQL in a driver of demand, which gives no error, but does remove all the lines either. I have converted the removal 'from' to ' Select * ' and may see the following error:
  
  Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
  PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
  ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
  "YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
  PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "CAL_0812")
  Error report:
  SQL error: ORA-01840: value not long enough for the format of the date of entry
  
  
  The interesting thing is that if I attach a condition of emplid, then the SQL above does not give an error and return lines:
  
  Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
  PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
  ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
  "YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
  PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "FM_CG_0812")
  and emplid = "1234"
  
  now, if the number of lines is identified (by giving more number of emplids), it begins to give the error when the number of rows returned is greater than about 30. It is completely independent of what employee is used, so there is no question of data dependence.
  
  Function optimizer cost is off and a subquery nest is off on the init.ora file
  
  subquery UNNEST= false
  
  optimizercost_based_transformation = off
  
  
  I don't know if it has something to do with this problem.
  
  Explanations would be welcome!
  
  Thank you
  Vikas

  I think it is question of data combined with a not very sensible date format mask (it could fail when the null data, because of your concatenation with '01' and work when not null data).
  Have you tried with a simple TRUNC?

  Your code:

  ...TO_DATE(TO_CHAR(ELG.PRD_END_DT, 'YYYY') || TO_CHAR(ELG.PRD_END_DT , 'MM') || '01' , 'YYYY-MM-DD') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
  

  After change:

  ...TRUNC(ELG.PRD_END_DT , 'MM') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
  

  Nicolas.

• cant serch for the dates... ERROR_80004002 keeps coming back?

  As I said in the title I can not serch for the dates, I get error 80004002

  cannot find answer for this error and has never had this problem before?

  anyone in the know that I could use some answers... lol

  Hello

  Method 1:

  I suggest you to see the links and check.

  Error message when you try to install updates by using Microsoft Update or Windows Update Web site: «0 x 80004002»

  http://support.Microsoft.com/kb/956708

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  I also suggest you to run the System File Checker

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ADF is intended for the data base designed with vertical diagram?

  Hello
  
  I want to know if ADF 11 g is intended for the data base designed with vertical scheme where even the names of columns will be stored in a generic table?
  
  Thanks in advance.
  
  Published by: user8925296 on April 12, 2010 10:06

  The short answer is no...

  What do you call a 'vertical plan', it's what others have called for a schema of entity-attribute-value or universal data model. I advise you to do some research open minded on these types of patterns if you develop an application before continuing. Great sound in practice, they have very inherent ease of use and scalability problems. [url http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2314483800346542969] This could be a good starting point...

  John

• Enter the value for the data files:

  Hi all
  I use 10.2.0.1.0
  I have a tablespace "hg" with two data files.
  whenever I use after an order to drop this tablespace I hv asked values for data files
  Welcome is:
  
  SQL > drop tablespace hg, including content and data files;
  
  SQL > drop tablespace hg, including content and data files;
  
  I have two data files to the tablespace named as hg.dbf, hg1.dbf
  
  now what I hv value to enter? or how to calculate the value.
  
  
  Thank you

  Honey says:
  Yes I know its 'AND' but when I using the '&' then oracle asked me of ' enter the values of the data files: "k".
  Please try first, then the calculation of the value.
  It can be a variable binding value.
  If you find the answer please suggest steps

  Simple words, the "DROP TABLESPACE" command does not support '&' character. & is a substitution of placeholder for SQL variable * more.

  Even if you provide the value for the "data files" prompt, the command does not work as it would lead to "drop tablespace including contents tsname *"details of your file *.

• Reading data from txt file and move the engine for the data

  At this point, I had the table and I already read txt file and I want to read the data in table and separate the corresponding element in 3 parts (3 axes: X, Y, Z) and I was able to make the transmission of data to move the motor in this position. and the treatment will be repeated after completing the first point

  Hey, the Index Array function may be what you are looking for. Here is the link to the documentation for this function.

  Function table index

  https://zone.NI.com/reference/en-XX/help/371361L-01/Glang/index_array/

• User for the data from Planning Server

  Hi all
  
  must be the user configured in Planning Server data, an administrator of planning?
  
  When I set up an admin it loads the data successfully using SQL KM in planning
  but when I service is not an administrator, I get the below error.
  
  Any ideas?
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File "< string >", line 64, < module >
  java.io.InvalidClassException: com.hyperion.planning.HspException; incompatible local class: stream classdesc serialVersionUID =-2065834634290912749, local class serialVersionUID = 1173493819024915347 at com.hyperion.odi.planning.wrapper.PlanningWrapper.login (Unknown Source) at com.hyperion.odi.planning.ODIPlanningConnection.connect (Unknown Source) at com.hyperion.odi.planning.ODIPlanningWriter.beginLoad (unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597)
  com.hyperion.odi.planning.ODIPlanningException: com.hyperion.odi.planning.ODIPlanningException: error/demarshaling return; nested exception is:
  java.io.InvalidClassException: com.hyperion.planning.HspException; incompatible local class: stream classdesc serialVersionUID =-2065834634290912749, local class serialVersionUID = 1173493819024915347
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83)
  at java.lang.Thread.run(Thread.java:662)
  
  Thank you

  Yes, it must be an administrator.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Requirements for the data plan BBM

  Hi, maybe this is a stupid question to some, but to buy the blackberry from rim, monthly subscription services will still work the same way that if I had a blackberry, IE. BBM will always use the data?

  Topic title edited to reflect the new topic.

  Wendi1 wrote:

  Hi, maybe this is a stupid question to some, but to buy the blackberry from rim, monthly subscription services will still work the same way that if I had a blackberry, IE. BBM will always use the data?

  Topic title edited to reflect the new topic.

  If you are referring to the BlackBerry OS 7 devices and below, then Yes! BIS is always necessary for users BBOS be able to use the BlackBerry Services like email or BBM. But if you are wanting to use the BIS on your Lumia then Im afraid it won't work. BBM works with regular mobile data or WiFi on iOS, Android, BlackBerry 10 and Windows Phone devices.

  I hope I understood your question.

• SQL queries for the date and year

  Hi friends,

  I have a named view - item_sales with 4 columns

  Item code

  Name of the element

  Transaction_YYYYMM (Date stored in a format YYYYMM)

  QTY_RECEIVED

  QTY_SOLD

  Sample data is

  ITEM_CODE POINT NAME TRANSACTION_YYYMM QTY_RECD QTY_SOLD

  TSHIRT 201307 3000 2000 AX

  TSHIRT AX 500 2000 201308

  TSHIRT 201309 1000 3000 AX

  CX 201307 3000 2000 XLSHIRT

  XLSHIRT CX 201308 3000 2500

  CX 201309 3000 2500 XLSHIRT

  END OF EACH MONTH I'LL RUN THIS QUERY TO FIND OUT THE DETAILS BELOW

  1. TO FIND NOM_ELEMENT WISE - QTY_RECEIVED AND QTY_SOLD (FOR THE CURRENT MONTH - EXAMPLE SEP)

  2. TO FIND NOM_ELEMENT WISE - QTY_RECEIVED AND QTY_SOLD (EXAMPLE EXERCISE OF JAN TO SEP)

  OUTPUT FOR SEPTEMBER MONTH LOOK LIKE THIS

  SEVEN MONTHS JAN TO SEP

  ITEM_CODE NOM_ELEMENT QTY_RECEIVED QTY_RECEIVED QTY_SOLD QTY_SOLD

  TSHIRT 1000, 3000, 6000, 5500 AX

  CX 3000 2000 9000 7000 XLSHIRT

  Pls advise me how to write queries for this

  RDK

  Hello

  This is called a Pivot, and here's a way to do it:

  WITH got_display_yyyymm AS

  (

  SELECT TO_CHAR (ADD_MONTHS (SYSDATE-1)

  , "YYYYMM.

  ) AS YYYYMM

  OF the double

  )

  SELECT i.item_code

  i.item_name

  SUM (CASE

  WHEN i.transaction_yyyymm = d.yyyymm

  THEN i.qty_received

  END

  ) AS month_received

  SUM (CASE

  WHEN i.transaction_yyyymm = d.yyyymm

  THEN i.qty_sold

  END

  ) AS month_sold

  SUM (CASE

  WHEN SUBSTR (i.transaction_yyyymm, 1, 4)

  = SUBSTR (d.yyyymm, 1, 4)

  THEN i.qty_received

  END

  ) AS year_received

  SUM (CASE

  WHEN SUBSTR (i.transaction_yyyymm, 1, 4)

  = SUBSTR (d.yyyymm, 1, 4)

  THEN i.qty_sold

  END

  ) AS year_sold

  Item_sales I have

  CROSS JOIN got_display_yyyymm d

  I.item_code GROUP, i.item_name

  ORDER BY i.item_code, i.item_name

  ;

  If you would care to post a small example of data (CREATE TABLE and INSERT statements) and the results desired from these data, then I could test it.

  The subquery got_display_yyyymm digit which is the previous month; It is not to change anything from month to month.  If you run the query in October 2013, then YYYYMM Gets the value '201309'.  If you run it in January 2014, then YYYYMM will be '201312'.

  As posted, it will work in Oracle 9.1 or higher.  The SELECT... PIVOT function that was introduced in Oracle 11.1 would not help in this problem, so you do not miss anything using Oracle 10 in this case.

• A SCN for the entire database and the different SNA for the data files?

  DB Version: 11 g
  
  I always thought that there is a unique SCN for the database as a whole.
  A quote from the link below as
  When a control point is completed, Oracle stores the RCS individually in the control for each data file file
  http://www.dbapool.com/articles/1029200701.html
  
  
  What does that mean? There is a SNA for the entire database, and there are individual SCN for each data files?

  Well, unfortunately, the article says more bad than good things. Or if I can't call them wrong, they are rather confusing and rather than clear things for the reader, its making them appear to look more confused.

  First things, YVERT is used for read consistency (CR) mechanism and the backbone of the notion of Multiversioning. The control point is the mechanism to help that recovery is decided. Contrary to what said article, not any kind of checkpoints update both the data file and the control file, and also, there is not a type of them as well. In addition, the article says that the LAST_CHECKPOOINT is set to NULL, while its actually set to the infinity since it is not possible to detect the moment when the database is opened, that the last issue of control over the file would be. In the case of complete control point, this number is saved and is also associated with the toa Controlfile own database leader at the next startup. If this is not the case, there is an inconsistency in the stop_checkpoint of the data file and the stop_checkpoint reocrded in the control file, leading to a recovery of the instance.

  There are several types of control points. Similarly, there are several types of SNA as well. Without going into the details of these, IMO, the article simply means that when the control point write over a file passes, oracle updates the file checkpoint on it and this is recorded in the Controlifle. as well.

  HTH
  Aman...