cant serch for the dates... ERROR_80004002 keeps coming back?

Similar Questions

• I cannot use windows update. The 80070490 error keeps coming back.

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• I keep trying to download an update, but the code 800b0100 keeps coming back?

  Code comes up and says to download a Solver update and try again, but the Solver does not solve the problem, I have windows vista service pack 2, I have a computer format microtour hp dx2400, 3 g of ram and internet broadband. about 240-329 gigabytes hard drive.
  Thank you
  Anthony

  http://support.Microsoft.com/kb/956702

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  Method for Windows Vista or Windows Server 2008

  To resolve this problem, run the tool (Checksur.exe) system update. To do this, follow these steps:

  1. Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After you run the tool, the Checksur.log file is located in the following location:

  %SystemRoot%\Logs\CBS\

  In a default installation of Windows Vista, this file is located in the following folder:

  C:\Windows\Logs\CBS

  http://support.Microsoft.com/kb/947821/

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  If the above does not resolve the problem:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "

  Hello

  So, here are the problems I encounter, and what I did to try to fix myself.
  Whenever I try to connect my MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "  This same thing happens everytime I try to put an SD card in the SD card slot.  However, despite this, I can plug my USB mouse and use it, as well as the keyboard and it records only.  I can also use the HDMI port to use my TV as a second monitor and, also, to record that.
  What I did to solve the problem, it is to restore the system to the previous times before that happened, did not.  I also went into the Device Manager and uninstalled and re installed, USB and SD card drivers.  I also tried something in the sense of taking control of the files via a right click on a folder and go to properties and then security and to the 'advanced settings', the problem with this situation is that I can't in readers at all.
  I am currently running Windows 7 (64 bit) on a laptop Lenovo, the computer itself is actually only a few months.  If someone knows something about this, please let me know.  Thanks in advance.

  Hello

  1. What is the number of brands and models of MP3 player?

  2 are logged in as an administrator on the computer?

  3. are you able to use this device on another computer (not Windows XP)? The MP3 player or SD card already worked on this computer?

  4. Once you get this error message? Do you get this error when accessing the mp3 player and SD card on Windows Explorer?

  Run an antivirus with Microsoft Safety scanner scan and make sure your computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Response with more information to help you.

• How can I disable the pop up message "of making Yahoo your homepage in Firefox" which keeps coming back?

  When I disabled Java and upgraded all the State of plug-in, made Firefox MSN my homepage and I wanted Yahoo. Now the message to my Yahoo home page keeps coming back when well even Yahoo is now in a State of the home page.

  The "Internet settings" in the control panel are just for Internet Explorer, so that you can put those aside for the moment. To check and change the home page of Firefox, you can use the page Options, as described in this article: start-up, homepage, tabs and download settings.

  Amethyst48 said

  Now the message to my Yahoo home page keeps coming back when well even Yahoo is now in a State of the home page.

  Where do you see this message? If it's on Yahoo itself, you can ignore it or click ignore. Sites have no idea of your current home page, because web pages are not allowed to read the settings of your browser. In general they just continually make themselves known, and if tell you them to be quiet, they remember that setting a cookie.

• Firefox will not keep the settings available, they keep coming back to a default value

  I used to be able to change the zoom by using ctrl_scroll and it worked fine (to fit the entire page on a single screen with no scroll bar). Now, even after I have it, as soon as I go to a new site or edit folders in gmail, it keep coming back to a default zoom make the page too big to fit on a single screen. It is especially annoying with gmail...

  There are a couple of modules designed to record your zoom settings. They also allow you to define a new zoom level for all pages, you have not yet visited. I have not tried, but here they are:

  • Default FullZoom Level
  • NoSquint

  If there are sites that are still a concern, feel free to post their URLs.

• An error keeps coming back that there is a problem starting werconcpl.dll - the specified module could not be found. What should I do?

  An error keeps coming back that there is a problem starting werconcpl.dll - the specified module could not be found.  What should I do?

  Hello

  ·         Since when are you facing this problem?

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  This file is a Microsoft Windows System. If you receive the warning on the file, I suggest you to run the latest Microsoft security on your computer Scanner and check if that helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 2: Run scan files (SFC) system auditor

  It will scan your computer to check the integrity of files on your system.

  The System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  SFC follow the steps in the article to run a scan:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• iPhone 4S.  Stuck on request to post a link to iTunes.  Has started after installing the recent software update.  Tried to turn but the iTunes link keeps coming.

  iPhone 4S.

  Stuck on request to post a link to iTunes.

  Has started after installing the recent software update.

  Tried to turn but the iTunes link keeps coming.

  You can not connect the phone to iTunes as requested?

• Updates to Windows during the stoppage has not taken effect and the same updates (16 of them) keep coming back in the next restart.

  Original title: Windows updates has not taken effect.

  My Windows updates during the shutdown did not effect. The same updates (16 of them) keep coming back in the next restart.

  I tried fixed it 50461 mentioned in one post, but the problem persists.

  Any help to appreciate.

  Hi Lee CC,.

  1 windows operating system you are using?

  2. you receive an error code or error messages?

  3. Why have you tried the Fixit 50461? Have you received a 646 error?

  This problem can occur if updates failed to install.

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  You can also read the following article and check if it helps.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Train Simulator error Setup error "Unable to verify the media" keeps coming back.

  Original title: Microsoft Train Simulator Setup error

  Try to install Microsoft Train Simulator on vista and when installing on the error 'Failed to check media' 2nd drive keeps coming back. Have also tried on another computer that has XP and the same results. Can anyone help?

  Hi Rick,

  Given that the CD does not work in Windows XP computer also, there seems to be a problem with the drive itself.

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver part of the disc with a soft and Lint cotton cloth.

  You can read the following article and check.

  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.

  If you are always faced with the question, so you may need to replace the drive.

• After the update (December 2015), Camera Raw does not fit on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  After the update (December 2015), Camera Raw does not on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  Yes, this is the same bug.

  The engineering team working on it.

  We have no fixed timeline.

  In the meantime, you can restore the previous update.

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• How can I get the lines for the date between 2 different days

  Hi all,
  
  How can I get the lines for the date between 2 different days.
  
  Sample data:
  Table name: Articles
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  Title 3 2011-08-21 08-21-2011
  title4 2011-08-28 2011-09-11
  
  Result will be:
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  title4 2011-08-28 2011-09-11
  
  This is my example query:
  SELECT * FROM items WHERE trunc (es.date_start) > = TO_DATE('2011-08-22', 'YYYY-MM-DD') AND trunc (es.date_end) < = TO_DATE ('2011-08-28', 'YYYY-MM-DD')
  
  but I can not get the expected results. Any help would be much appreciated.
  
  Thanks in advance

  not read your question properly before...

  Please try this

  Select * FROM items
  WHERE (TO_DATE ('2011-08-22', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end)) OR
  (TO_DATE ('2011-08-28', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end))

• ADF is intended for the data base designed with vertical diagram?

  Hello
  
  I want to know if ADF 11 g is intended for the data base designed with vertical scheme where even the names of columns will be stored in a generic table?
  
  Thanks in advance.
  
  Published by: user8925296 on April 12, 2010 10:06

  The short answer is no...

  What do you call a 'vertical plan', it's what others have called for a schema of entity-attribute-value or universal data model. I advise you to do some research open minded on these types of patterns if you develop an application before continuing. Great sound in practice, they have very inherent ease of use and scalability problems. [url http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2314483800346542969] This could be a good starting point...

  John