for the mobile camera Lenovo vibe turbo p1 is worse.

Similar Questions

• What prevents my last sony ericsson pc suite for the mobile c905 downlaoding computer after uninstalling the olderversion?

  What prevents my computer to download the last sony ericsson pc suite for the mobile c905 after uninstalling the olderversion?

  Check the requirements of the new PC suite

• Re: the problem of Firefox/GMX I just posted. When I connect to my GMX email, Firefox takes me by mistake for the mobile email from GMX. It's nothing I'm doing

  I understood why my GMX email looking for strange and abstract with Firefox. Although I connect everything as I always do the same favorite site (and I even tried to type in the web address of gmx.fr again to be sure) instead of take me to my mail, Firefox has suddenly started taking me to login GMX MOBILE instead which is a different web address altogether. Firefox has a clean mind. It doesn't matter what I can no longer do for my personal mail account using the Firefox browser. I have to use IE. Until the last few hours, Firefox took me there very well. Then all of a sudden it started give me the mobile GMX e-mail instead. PLEASE SOLVE THIS PROBLEM AS SOON AS POSSIBLE. It is a flaw of Firefox, not a flaw GMX.

  You can delete all data stored in Firefox with a specific area through "Forget this Site" in the context menu of a history entry ("" history > view history "or" view > sidebar > History "") or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from that domain you don't want to lose then check that back up these data or make a comment.

  You can't recover from this "forget" unless you have a backup of the files involved.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• 2558 HP HC MONITOR DRIVERS for THE WEB CAM AND MIC AND the OTHER BUILD IN DEVICES CE WHO IS BUILT IN MS7 IS BAD, AND IT SHOWS the errors of devices

  It takes the right drivers for hp w2558hc monitor, is the web cam and microphone and other devices. Now what a windows MS7 is incorrect and when the pc doc runs it says it devive pilot problesm we tried to remove the drivers, that it doesn't always, the only way to solve this is unplu cable webcam, while the device driver goes.  It was working OK in vista and when hp gave me free ms7 upgrade, when the errors started. I still have the thing he had trouble even on vista because of the blue projection. MICROSOFT and HP has to happen to get together and put the correct drivers MS7 or update the old was the last time, she was last updated 2006.  They sstesm now I have is a 64-bit MS7, we tried everything. It works but it does not just because of the problem of driver and the only way to remedy to the webcam cable monitor unplu when not in service.  It gives you 3 errors and it organizations all the internal features of this monitor as a web cam, mic. any suggestions out there?

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/33d7bcee-b0ed-489b-a15d-c087c421cb55 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have a Vaio VGN-FE730FM how do I install the drivers for the web cam Motion eye?

  I need drivers for Vaio VGN-FE730FM

  I have a Vaio VGN - FE730FM how should I install the Motion Eye web camera, I search the web site vaio I found the driver and used, but did not work. Is there a procedure for o it. I had to reinstall my whole system and I lost the SM bus drivers, bus modem high definition Audio, USB 2.0 web camera. How should I install the web cam?

  Hello

  • What happens when you try to use it?
  • You receive an error message?
  • Have you checked the State of the Webcam in Device Manager?

  Here are the steps:

  1. Click Start, then type devmgmt.msc and press ENTER.
  2. Check the status of the Webcam.

• Not able to download programs BBC i-player for the Mobile Archos device

  I Player of BBC downloads

  Trying to download programs from the bbc for Archos (mobile devices option) and get the message «the need to upgrade media player»  However, the only option is apparently the one I have on Vista.  I can download on Vista laptop, but no more for Archos - worked a few months ago.  Any suggestions please?

  Hi MagsD1,

  ·    You have a third-party codec pack installed on the computer?

  You can check if you have installed a third-party codec pack on the computer and try to uninstall it and try to download the BBC i on the computer drive and check if this may help,

  You can also navigate to the link below and follow the steps to fix Media Player on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  If the steps above do not help, you can contact the BBC i-player support to check if they have any updates on this issue and check if you need to make changes to install the program.

  Link to the help section of BBC i-player:http://iplayerhelp.external.bbc.co.uk/

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Compositions for the 3D camera zoom question

  Hello.

  So, I have a question about compositing with 3D in after. I tried to import a drawn to the radius of photoshop 3d object with size 1920 x 1080 with the 3D plugin after and what I want is to turn while the camera's zoom in as in a dolly (from far almost) movement reached a point where the camera switches the object in 3D rotation, which disappears at this point. Streight pretty basic forward camera movement. So what is happening is that while the camera moves forward and to get closer to the object, the objects are pxelate wrong and when the unit is super close, it seems terribly pxelated. I guessed that after that effects condition as image objects instead of the real 3D object then, that sucks semi and so tried to make a larger composition 3D in photoshop then import it to legacy so that when the zoom of dolly-camera movement happens this isn't Pixelize. I made a model of 6000 X 4000 in photoshop and tried to import to after effects and what has happened is that it took about 8 minutes to import the composition (literally) in legacy and when I tried the camera movemenet this has worked, the pixelation-no I mean, but then after effects takes forever to make a change/ram preview or anything at all moving from one image to another takes like 30 seconds or more, even at a quarter of resolution. So obviously I can't work like this at all, especially as it's just a 3D composition which I want to have a lot in the same project. I have a pretty good machine, Quad core i7 2, 3 GB with 8 GB of ram, so there is nothing I can do to improve it. So given this information on what I want to do, can you give any advise how to solve this, if possible? Thank you!

  J

  The only objects that you can move the camera in and no pixelation are vector objects such as Illustrator, shape layers or hidden file strong. In all other cases, when the unit is at the same distance from the layer as the zoom value (object in the center of the model and z = 0, the 1000 camera zoom value, camera centered in the model and z =-1000) the layer is 100% wide and you see pixel for pixel. If you move the camera over nearly half the effective scale scale becomes 200%. It does not take much to end up with a mess.

  Most of the time, if I'm so close, I hide chunks with motion blur.

  With regard to the acceleration of work with large layers I'd watch a downward revision to the resolution of the window of your model (set to 1/4) or learn more about the use of proxies. Get the movement the way you want to look at, light motion blur and make a test.

  If you have really large files you can do the trick of the crop and scale and then stack them in a 3D space and cut between them. Here's the trick. Start with an image that is 10 X the size of your model, duplicate and it reduce by 50%, that duplicate and resize it down 50%. Now crop the original image to 25% of the original size, the second at 50% of the original size of the cultures.  You can do this with the size of the canvas. Leave the last full-size.

  This gives you three images that you can intensify in AE but install away from the camera. The last of them became the wide shot, and as you move in you cut to the next, then the next close of cultures. This keeps the size of the images on 2 X the size of the model, saves a lot of rendering time and makes your publication much easier to manage. The trick is to use the scale property on the first two copies (zoom full width and environment) so that the size of the image corresponds to the next layer below. The broader picture is 400% across (even less), the second 200% scale, and the third left at 100%. You won't have pixilation problems, you will have a more manageable composition and your render time will be reduced.

  I hope these suggestions help.

• I have an old camera a Canon AE1 since the 1970s. Any adapter to fit the old for the new cameras lens

  Can anyone give me any advice on whether I can buy an adapter to fit my old lens on newer model cameras. I have 3 old lens that has worked with the old AE-1 a 55mm, a 35-70mm and a 100-200mm. Any thoughts would be surely appreciated.

  Do not waste your money on an adapter even if they exist. Much better to buy modern lenses that incorporate Auto Focus. The new cameras have an accent like a split screen or whatever your film body has help.

• In the edition of browser - can be used for the mobile version of a site?

  Hi can someone please tell me if a customer can use the browser in the system on the mobile version of its site of edition? She's obviously use it to adjust the desktop version, but I have been unable to know if she can use it to adjust the mobile version of its site. Thank you - Anne Taylor

  Hello Portia,

  Yes, at any time allows the browser to edition to change the three - office / phone / Tablet layouts of your muse site.

  Check this document http://creativepro.com/introduction-to-browser-editing-adobe-muse, which will give you a procedure step by step to follow.

  Kind regards

  Ankush;

• change port number for the mobile server after installation

  Jin
  I use windows 2003 server release 2, Server Oracle 11 g R2 and oracle database lite 10g R3. I installed successfully the mobile server with port 80, but when I start the mobile server I get an error message indicating that port 80 is already in use. Now, I need to change the port number of the mobile server. can someone tell me the solution.

  If the Oracle Lite installation type is INDEPENDENT, then to change the port number of Olite in any other available free port number, you must edit the file by default-web - site.xml or site.xml - web-http file present in $OLITE_HOME/mobile_oc4j/j2ee/mobileserver/config directory.

  You can at any time change the port in the file http web - site.xml and bounce services, the new port will take effect.

• Satellite L650 - update of the need for the Mobility Radeon HD 5650 driver

  Hello

  I'm looking for some updated for my vga card drivers, and the only ones left are 2011 (who are old enough).
  I managed to update with AMD generic drivers, but since I have a 24 "display when I do, I get black borders in resolution max. It happens, I think, because the graphics card has been tweeked by Toshiba so my only option is that you have some updated drivers for it.

  Any help/info would be great.

  Data sheet:
  Satellite L650-11F PSK1JE
  Processor Intel I5 2.1 ghz
  Mobility radeon hd 5650 graphics card
  4 GB of ddr3 memory
  hard drive 500 GB

  > I managed to update with AMD generic drivers, but since I have a 24 "display when I do, I get black borders in resolution max. It happens, I think, because the graphics card has been tweeked by Toshiba so my only option is that you have some updated drivers for it.

  Drivers Toshiba re changed but I don t think that your right/left borders on the external screen are related to this change. The drivers of Toshiba support protection against overheating, but AMD drivers don't support such feature.

  However, I think that the question that is related to the bad resolution. You must choose the native resolution used by the external monitor.
  In addition in the ATI catalyst, you should check the settings that are associated with the border I put t know the exact description, but as I remember there is an option that eliminates the left/right border.

• Do I need previous updates to get the update of the marshmallow on lenovo vibe x 3?

  So far I didn't my update of Marshmallow yet for vibe x 3, I still havn't installed upgrading 317 MB, I must first install to get the marshmallow?

  Welcome to the Sougat_Sharmaforums!

  There is an order of updates that must be followed if you want to install the Android Messrs. it update-there's no way how to jump special updates and install only some of them.

  Kind regards

• Support for the new camera [how to open files from Nikon D500 Raw in CS6?]

  I want to download a more recent version of ACR that supports my D500 on CS6. The web seems to indicate that 9.1.1 is the latest version for CS6 and 9.6.1 for CC only.  I have LR 6.6.1 and it works fine but how open in CS6 with the DNG Converter or the opening of LR? Thank you

  I want to download a more recent version of ACR that supports my D500 on CS6.

  It is not possible. You need Camera Raw 9.5 or later which is only compatible with versions of Photoshop Cloud.

  You'll have to convert to DNG for edit in CS6.

  The web seems to indicate that 9.1.1 is the latest version for CS6 and 9.6.1 for CC only.

  That is right.

  I have LR 6.6.1 and it works fine but how open in CS6 with the DNG Converter or the opening of LR?

  You CAN convert the D500 Raw files to DNG with the DNG Converter

  Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC

  Camera Raw: How to use Adobe DNG Converter - YouTube

  But since you already have LR 6.6.1 use it to convert to DNG, then edit the DNG in CS6.

• install the patch for the format camera raw in 12 items

  Where is the patch to a new format for camera raw in 12 items?

  Thank you.

• Game for the HARD Y510p Lenovo Ultrabay drive performance

  Hey all, I just installed a 2 to Samsung SpinPoint drive via Ultrabay caddy in my Y510p. I was able to install my games on it without any problem, but when I started to play Alien isolation, the game was extremely laggy. I was wondering if it was a problem can be fixed with the graphics settings, or if its just hard to get the quality of play in the ultrabay. If someone could help me, it would be much appreciated.

  In fact, I don't know why, but when I restarted my computer, the game began to run normally again. I don't know how it happened, but I'm not complaining! Thanks for your comments