Form - different default value for each new line needed

Similar Questions

• What should I do for default values when a new line is created in a tabular presentation?

  Hello all-

  I have a tabular presentation that requires a few columns to be entered by the user when he or she creates a new line, but other fields in the column can just default to certain values.  How to set these values by default so that the user doesn't have to be bothered with enter no data except those which MUST be entered?

  An example:

  Form1

  CITY OF COUNTRIES IN THE REGION

  APAC JAPAN TOKYO

  SIDNEY AUSTRALIA, APAC

  APAC KOREA-SEOUL

  REGION is almost always APAC, then I want that by default.  The user can always adjust if necessary, but I want to put it to the user, only to save having to enter a value.  When the user clicks on the button to add a line, that I want to load this value immediately and leave the two empty fields so the user can enter what they want.

  Thank you!

  John

  Hello

  Go change this column.

  Under attributes of tabular form, you will find options to set the default value

  Kind regards
  Jari

• Type a table defined clusters to hold configuration data - definition of default values for each element of the array

  Hello

  I was wondering if I could get some information and opinions on the use of an array of type defined clusters to store configuration data.  I am creating a program to test several EHR and wanted to have a control of type defined for each HAD with the information needed to create the DAQmx tasks for all signals for it must HAVE.  I am eager to do so that the data are encoded in hard and not in a file that the user might spoil.

  Controls of type def are then put into a Subvi who chooses as appropriate, one based on the enumeration of Type DUT connected to a case structure.

  I have problems with the control of the defined type.  I see issues when you try to save a configuration unique to each element of the array in the array of clusters.  Somehow, it worked at first, but now by clicking on "Operations on the data--> default font of the current value ' on individual elements of the cluster or the entire cluster (array element) does not save data when I re - open the command def.  What I am doing wrong?  I'm trying to do something with the berries of the clusters that I shouldn't do?

  I enclose one of the defined reference type controls.  I tried to change it bare to see if that helped, but no luck.

  To reproduce, change the resource string for the element 0 of the array and do the new value by default.  Then close the def of type, and then reopen it.  The old value is always present in this element.  The VI is saved in LabVIEW 2012.

  The values of a typedef are not proprigated to the instances of the control. They get if created WHEN data values have changed. They will be not updated with the changes to come. You must create a VI specifically to hardcode your values or to implement a file based initialization. The base file would be much better and more flexible. If you don't want users to change the data simply encryption. There is a wedding blowfish library that you can download.

• Is it possible to have a default attachment for each new OP?

  The customer wants to have an attachment of Long text that would be assigned to each new OP. He wants to return automatically to prevent the user from forgetting to inform him.

  We thought to add the printer layout of the PO, but the text is too long and it does not.

  Is it possible to do?

  Thanks in advance,

  Juliana

  Hello

  Have you tried fixing at the level of the supplier?

  I think it can help you

  However, if you are looking for attachments by default/auto regardless of provider, there are two ER opened for this issue:

  Bug 5360495 : NEED to AUTOMATICALLY CREATE the TIE IN. FORMS FRENCH IN. TYPE of ONLINE

  Bug 17837498 : AUTO HOW to APPLY ATTACHMENTS FOR PURCHASE ORDER?

  Concerning

• After update, tools of default reset for each new application launch

  Hi, my recently updated team to update to the latest version of CC and we view every time that we launch, our pot of paint guard reset to the default value in the gradient tool, our pencil tool restores brush, etc. It's very frustrating because we use the program all day every day. Sometimes I don't remember close Photoshop at all and it seems that the tools to reset? Y at - it an option to stop this, I'm not.

  Hi 812 b,.

  It is a known issue with version CC2015.1 and the engineering team is currently working on this topic.

  The workaround is to disable 'show the initial working space' in the Photoshop preferences > General.

  Reference article: Photoshop CC 2015.1: reset with each launch tools

• Several panels reducible Spry with different default values for open - close

  Hello

  The site I'm trying have a page with (5) folding panels Spry. (4) are by default open, (1) is set by default closed.

  I'm trying to get (3) open and (2) closed. However, defining a second flaw of closed panels give a syntax error.

  Someone knows how to operate, if possible at all?

  

  Remove the parenthesis after "CollapsiblePanel5". It should be like this:

  var CollapsiblePanel5 = new Spry.Widget.CollapsiblePanel ("CollapsiblePanel5", {contentIsOpen: false});

• Loading the default limits for each execution

  Hello

  My situation is like this:

  I spend my sequence using the sequential model. Usually, the sequence is executed, 'in the loop', which means that when once the sequential model is launched, we can test unit after unit until we want to put an end for some reason any. The sequence is load dynamically by the sequential model and download after executing the step to discharge option.

  In the sequence, we use limits. Default TS limits similar to below.

  

  All our limitations change during execution depending on what unit we test and on what stage is the unit.

  Problem:

  I thought that if the sequence is loaded dynamically, it is unloaded when executing the next time that the next unit will be tested the default values of the container limits will be charged (in response to being dynamically loaded and unloaded at the step which called the main sequence is executed). Unfortunately, it seems that when we realize continous test the test limits have not returned to the default value, as expected, but they are a superposition of the limits assigned by previous executions. Of course

  Issues related to the:

  1 are my expectations about the behavior of TS are correct?

  2. how to impose default deadline to be 'reset', the default value for each run of the sequence, not only the first execution of sequential model?

  MimiKLM wrote: I am worry the speed of loading, you talked about associated to your solution, but potential problems with memory. Let say, I called the main sequence of 1000 times without breaking execution. So instead of having one copy of the sequence called with wiped/reset all variables and properties I have 1000 copies in the memory. I would call it a waste to have 1000 copies only because I need to have the properties and variables deleted.

  The copy exists only during the execution of the sequence. Once the execution of the sequence is complete, the copy will be destroyed/released. At least as long your code modules do not hold their own reference to it somewhere (which generally do not do).

  If you call from the main sequence 1000 times in a loop, you must still do not have a runtime copy into memory at once. The difference is a new copy is created (and destroyed once that the sequence is made running) each time, rather than create a copy only once and reuse. There is a performance hit in this call of your sequence which is somewhat proportional to the size of your sequence, but unless your sequence is really huge, or test you execution is extremely fast, you probably won't see the difference.

  Hope this helps to clear things up,

  -Doug

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• Want to change the WordPad default values for font size and line spacing

  I use WordPad quite heavily because it is simple and fast.  But the new version of W - 7 seems to not allow you to change the default values for the font, size and line spacing.  The default values are not suitable for a large part of what I do and I'd like to find a way of quickly and easily, either make the changes permanent or change this to open with a single click of mouse or at most two.  Any suggestions?

  It is the "best" solution to workaround.  After you change your Default.rtf custom, simply move it to your system32 directory and add the "Default.rtf" at the end of the location of your target on the property sheet for your file WordPad.exe.

  Every time that you open its default location in the directory c:\program files\windows NT\Accessoires WordPad.exe, it defaults to now your Default.rtf custom.

• Default value for the select list of type of form elements

  Hello
  
  I do not work with Apex that mutch, so this may be a simple question... but I still need help.
  I have a form, in this form, I have a question P19_ONTVANGER_ID, this is based on a LOV.
  This LOV is on a table that has a field of username with the value of APP_USER.
  The table looks like:
  ONTVANGER_ID this is the PK and is going to be the return value from the LOV.
  NAME is the display value for the LOV.
  USERID is the column APP_USER.
  
  What users would like to get is that if they create a new record, the default value for the P19_ONTVANGER_ID field is their own ONTVANGER_ID.
  But they must also be able to select another user.
  
  hope there is someone out there that can and will help me.
  
  Kind regards
  
  Rob
  
  APEX 4.0.2 Oracle 10

  Rob-v-M-Gn-Nl wrote:
  Until now, I had, but I need to select the value of the id of the table and the list of selection item appears the corresponding value.

  How can I do this?

  You can select the Type of default value as the body of the PL/SQL function

  and to add something like that

  declare
  v_return number;
  begin
    select your_id
      into v_return
    from your_table
    where some_column = :APP_USER;
   return v_return;
  exception when no_data_found then
   return null;
  end;
  

  http://www.asktheoracle.NET/PLSQL-function.html

• Type/conditional default value for a form element

  Hello
  
  I have an interactive report with a form on the table 'A' who 'Who' has columns like 'CREATED_BY', 'LAST_UPDATED_BY '. Now, I'm auto these columns in the form with the & APP_USER. function. The scenario occurs when the 'P' user clicks on the button 'CREATE' on the report, these columns of the report get populated info P. After committing this recording, the "Q" user edit this record even with the link 'Edit' in this folder. The two columns get populated by the Q news, ideally only LAST_UPDATED_BY should get populaed by the news of the Q and not the CREATED_BY column, as it is the 'P', which created this record.
  
  To do this, I guess that in the type of default value for these items, I have to use "Body of the PL/SQL function" instead of "static text with Session of Substitutions in State". Problem is to know how to code the filter: If the user pressed 'create' button or the button "Edit". Help, please
  
  Thank you
  Mary

  Hi Mary

  Usually, I would do this sort of thing on a trigger. However, you could do the conditional CREATED_BY field on the primary key of the record is null (which is itself a new record, but it must have a value of an existing record). The LAST_UPDATED_BY field should not be conditional, as it should be the name of the user who recorded the record.

  Andy

• Best way to set the default values for the form elements

  Hello
  
  I have a form with a lot of defaults that is mentioned below...
  

    Field                      value  
    created by             :APPL_USER
    creation_date         SYSDATE
    last_updated_by     :APPL_USER
    last_update_date    SYSDATE
    item1                     value1
    item2                     value2

  I am currently using calculation-> after presents... then when we create/update a record... these computaion takes place and the default value for the inserted values get... THIS WORKS PERFECTLY WELL.
  
  I want to know... If this approach is fine OR we can have a better approach to achieve...?
  
  Thank you
  Deepak

  Hello

  I think it's good if it fits your need.

  But why you have these fields in the form?
  created by: APPL_USER
  CREATION_DATE SYSDATE
  last_updated_by: APPL_USER
  last_update_date SYSDATE

  The user can enter the ones?
  I thought that those who are to audit and I would fill those drop with trigger in the database.
  So that you get the same "correct" values if you need to manipulate the data with example of sql client

  BR, Jari

• ACS5: method of different external authentication for each user account

  ACS4 I could specify a different external authentication for each user account. I'm trying to find a way to do the same thing to the ACS 5? When I go under identity in Access Services, I see the system requirement: username I can use to identify the user who logs in, so that I can directly to a source of different identity, but the separate political configuration for each user is very inconvinient and would require hundreds of policies, in our case.

  I was hoping that we can create a kind of attribute for each user. SysAdmin > Configuration > dictionaries > identity > internal users. I created the new attribute called 'Storage of identity' with the enumeration type, which has 4 values: internal, Entrust Token, Token RSA, counts AD and checked the box "add a political Condition." I can then go under each user and select the storage of identity for each user. But now I can't find where I can use under part of identity of an access policy. I can use it under "Group mapping" but that maps to one group and not to an identity store. I need to use it under the identity somehow, but I can't find how.

  Hello Roman,

  The attribute you created will be available when the user is authenticated through internel ID store, so that you cannot use to select the store ID.

  The best way to do this would be to use other attributes to differentiate the identity store.
  Allows you to create a sequence of identity store so that for each user, ACS will try to authenticate by using multiple identity store.

  For example, you can use these:

  Network status

  > End Station filter

  > Device filter

  > Devide filter Ports

  Here you can import filters from a file and it would therefore be more scalable.

  Hope this helps.

• Specify a default value for a column in a Script

  Greetings fellow Forum inhabitants,

  Thank you in advance for taking the time to read and answer my post! (thumbs up)

  I'll jump in full.

  I've already created table:

  CREATE TABLE Bill

  (

  OrdID number 4 NOT NULL,

  Description VARCHAR2 (30) NOT NULL,

  ProdID NUMBER (6)

  actualprice NUMBER (8.2)

  NUMBER Qty. (8).

  itemtot NUMBER (8.2)

  );.

  I have to create a script to load the rows in the table of the invoice by the intervention of the user. However, I specify a default value for quantity

  That's what I have so far:

  INSERT INTO Bill (ordid, description, prodid, actualprice, qty, itemtot)

  VALUES (& & ordid, & & description, & & prodid, & & actualprice, by DEFAULT, & & itemtot)

  WHERE qty = DEFAULT;.

  or

  WHERE DEFAULT = 1;

  or

  ??

  I don't know where I am going wrong. I apologize if I'm unable to communicate what she I'm actually doing.

  Any advice would be appreciated.

  Thanks again for your time.

  Hello

  e752a7a0-bab5-4ee4-9ea4-bf7c4a2cadab wrote:

  Greetings fellow Forum inhabitants,

  Thank you in advance for taking the time to read and answer my post! (thumbs up)

  I'll jump in full.

  I've already created table:

  CREATE TABLE Bill

  (

  OrdID number 4 NOT NULL,

  Description VARCHAR2 (30) NOT NULL,

  ProdID NUMBER (6)

  actualprice NUMBER (8.2)

  NUMBER Qty. (8).

  itemtot NUMBER (8.2)

  );.

  I have to create a script to load the rows in the table of the invoice by the intervention of the user. However, I specify a default value for quantity

  That's what I have so far:

  INSERT INTO Bill (ordid, description, prodid, actualprice, qty, itemtot)

  VALUES (& ordid, & description, & prodid, & actualprice, by DEFAULT, & itemtot)

  WHERE qty = DEFAULT;.

  or

  WHERE DEFAULT = 1;

  or

  ??

  I don't know where I am going wrong. I apologize if I'm unable to communicate what she I'm actually doing.

  Any advice would be appreciated.

  Thanks again for your time.

  Sorry, I can't understand what you want.

  If you want the production order 1, then put a literal 1 for the value of this column:

  INSERT INTO Bill (ordid, description, prodid, actualprice, qty, itemtot)

  VALUES (& ordid, ' & description', & prodid, & actualprice, 1, & itemtot)

  ;

  or, if that value is used elsewhere in your script, set a variable substitution:

  DEFINE Qty = 1

  INSERT INTO Bill (ordid, description, prodid, actualprice, qty, itemtot)

  VALUES (& ordid, ' & description', & prodid, & actualprice, & qty, & itemtot)

  ;

  I hope that answers your question.

  If this isn't the case, post an example, such as:

  "If the user types... then the created line must contain... but if the user types... then the new line should be... »

  Simplify the question.  Do you really need 6 columns to show what you don't understand?  Why not just 2 or 3 columns?

  See the FAQ forum: https://forums.oracle.com/message/9362002

• [Labview] I want to get the average value in each new 100 samples.

  Hello. I'm Sophie.

  I'm studying Labview for my research.

  For me, the sampling frequency is 125KHz.

  I want to get the average value in each new 100 samples.

  Therefore, I want to get an average value of 1 ~ 100th samples and store this average value. Call assets(1).

  Then, I want to get an average of 101 ~ 200th samples and store this means value, call moyen2.

  .

  .

  .

  .

  I don't know how me I want.

  Thank you

  Sophie.