Re: Equium U400-145 PSU42E - light does not

Similar Questions

• Equium U400-145 full stop by an accumulation of static electricity

  I recently bought an Equium U400-145, really happy with it except...

  Yesterday, when I tried to turn it on, absolutely nothing happened - no light, no sound, nothing. I checked the plug, battery etc but nothing.

  I took it directly to the store and the guy told me it was due to an accumulation of static. He unplugged the power cord, took out the battery and you press the Start button for 30 seconds (to static discharge), replaced the battery and it started immediately.

  It is great except that it now that I have at home, it does the same thing about whenever I turn it off. I do not think that we live in a particularly "staticy" House and it is a bit of a pain to have to remove the battery, press the button for 30 seconds, replace the battery and turn it on whenever I want to put the machine running!

  I was wondering if anyone else has had the same problem and if there is a simple solution?

  see you soon

  These issues cannot be resolved by simple solutions.
  Simply the solution was done by your local dealer, but as you can see it was a temporary solution only.

  Then, contact the nearest service provider authorized as soon as possible.
  The addresses and telephone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• Equium U400-145 - part number for the LCD cable

  I have a Toshiba Equium U400-145 (series 88102623W). The display acted during the last two weeks by going all blurry with a sort of static green.

  When I move the front cover and back it corrects sort of himself. I am out of warranty and used to be a satellite for the Navy engineer, so I know how to fix the printed circuits, etc. (in other words), that I felt competent to investigate). I found that there is a cable near the left hinge that if I push it sideways slightly corrects the flaw of the screen. If I let go he returns to the 'fuzz '.

  The problem is that explaining that parts team left me a little frustrated because they could not decide if it was one of these two part numbers: A000020640 or A000022790.

  I'm inclined this is the first judging by their description of the element (thick cable that leads from the motherboard), but I was wondering if someone could possibly shed light on this for me?

  Thank you

  VJ

  Hello

  I understand your problem very well, but if they can't help you even that they can identify and check the Toshiba database how we can help you on this forum users?

  Have you contacted Toshiba authorized service provider in your country?

• What is the duration of the normally hard butter on Equium U400-145

  Hi guys,.

  First of all, I can't find the EQUIUM U400-145 in this Web site, and secondly, I would like to ask how long the butter normally lasts.

  Thank you

  Sorry, but I can find it there. I ask what you're doing wrong. It's so easy. There is a single Equium U400. It is PSU42E and it is true of your model.
  Please check again.

• Upgrade of the disk HARD Equium U400-145

  Hello

  I have a Toshiba Equium U400-145 and the vehicle currently has Windows 7 on it and a 160 GB hard drive. Is it possible to move on to bigger hard drive (1 TB) and if so I can use another external HARD disk (that is, connected by USB) to take an image of the current using Clonezilla, then make the hardware upgrade and restore the image to the new drive once its equipped? (Or Windows 7 will need to be reinstalled)?

  Theoretically, it should be possible. Clonezilla is unknown to me, but in the past, many people have done a similar thing with other applications like Acronis. In your case, I think you need to use Clonezilla Live.

  U400 is God machine and works perfectly with Windows 7. I don't know if you were able to install it perfectly including all necessary drivers, tools and utilities.
  Return to the modernization of the HARD drive. I did not have this machine and can not say for sure is everything going to be OK, but I think that new HARD drive should be recognized correctly with full capacity of 1 TB.

• Equium U400-145 - where is the HARD disk protection tool?

  I just bought an Equium U400-145, and in the manual it says there is a Protection of the hard disk utility and properties are accessible from the icon on the toolbar or via the start menu in Toshiba - Utilities.

  There is no icon in the toolbar and without Protection of HARD drive in the start menu. Protection disc HARD drivers are on the C: drive, but when I try to install I get a message HDD Protection is not supported on this model. It's strange because the download from Toshiba site lists the Protection drivers from the HARD drive for this model.

  Any who have HARD drive Protection works on this model or know if it should work?

  I have a U400 to and protection of the HARD drive is not available on all models of laptops U400.
  The user manual has been created for all the U400 laptop models and it of possible that your U400 doesn t support this feature!

• Equium U400-145, recover data from HARD drive

  Hi all

  My Toshiba Equium U400-145 is eventually died after a number of evidence of years of hard work!

  I bought a disc docking sata hard and recovered a number of data on my new computer.
  The problem is that it is only about half of the data, and especially not the elements of my old office of computers.

  Someone at - it ideas how I'd go about obtaining these files?

  Thank you very much

  Ollie

  Hello

  You want to find files that have been placed on the desktop?
  What windows system did you use?

  In Windows 7, you can find the Office at:
  + User C:\User\your account\desktop +.

  Here, in this folder, you can find all files that have been placed on the desktop

• Equium U400-145 memory problems

  Hi, I have the laptop above and I had used it for a long time with 3 GB of memory.

  The system has two locations and in the bottom, I had 1 GB and above, I got 2GB. The system came with 2 x 1 GB and I have kept a module provided and added a new bought Toshiba 2 GB module. The memory is PA3513S-1M2G
  2 GB memory PC2 DDR2 (667 MHz).

  I have just updated to Windows 7. Before I was constantly this that I swapped the two modules autour system crashed when loading, with a screen blue with the Windows startup screen, saying there was a problem with my computer and he was going to shut down to avoid damage. He said I check any recently installed hardware.

  If I have Exchange modules around again, it works great, even on Windows 7, 64-bit.

  I updated the BIOS to ver 4.00 but the same happens.

  I recently bought another 2 GB module to keep the system up to 4 GB, but I have determined that the system will keep crash at startup if:
  -the lower slot has 2 GB with the upper part with 2 GB
  -the top slot has 2 GB and below is empty
  -the bottom has 2 GB and higher has 1 GB

  If the bottom has 2 GB it works, just as superior with 2 GB and 1 GB lower!

  There is clearly something wrong with the ability of the system to deal with memory. [Another poster | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=154992𥵰] asked on memory max capacity of this system and its investigation was * bad * responded indicating that this system may have only 2 GB. * This is completely false * as I've used it with 3 GB without problem for 1 year.

  If anyone can help I would be extremely grateful.

  Concerning

  Lucius

  Hello

  Equium U400-145 has been equipped with Mobile Intel® GL960
  Express Chipset. Is this good?

  Here are some features of this chipset:
  http://www.Intel.com/products/Notebook/chipsets/GL960/GL960-overview.htm

  As you can see the chipset handles the 533 Mhz max modules, so you can use 667 Mhz, but the modules will run at 533 Mhz ONLY

  Here you can find the chipset specifications:
  http://www.Intel.com/assets/PDF/datasheet/316273.PDF

  Point 1.3:
  There you can clearly find the info that chipset supports 2 GB RAM max and modules are limited to DDR2 533 Mhz!

  Maybe you were able to use the 3 GB of RAM but the chipset has a limitation, and usually the most memory RAM is not supported.

• Equium U400-145 - can I he move to 4 GB?

  Hello
  I was hoping someone could sort out some confusion for me, I recently bought a u400-145 and love but I find when using vista more memory the better so I was thinking of upgrading the memory. It comes with 2 GB (2x1GB) and when I checked on this site that I found it reads as follows...

  standard: 2 048 (1 024 + 1 024) MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM (667 MHz)

  but then I fell on the follow-up on ebay...

  http://CGI.eBay.co.UK/WS/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:it & it em = 220339636122

  and they claim that this laptop supports up to 4 GB.

  can someone advise me on this subject, I can pass this laptop to 4 GB or not.
  Thanks in advance.

  I checked the specification of the system on the Toshiba site and the Equium U400-145 can only be upgraded to 2 GB.

  Up to 4 GB would not work in your notebook. :(

• Police Segoe UI Light does not

  Segoe UI Light does not work in Firefox 8 when you use it in CSS.

  You may need to use additional selectors to get this specific light family group Segoe UI font.

  See this for an example on Arial.

  • [797446/questions/797446]

• Equium L300 - 17Q - "Enter" button does not

  As read you on the title my TOSHIBA EQUIUM L300 - 17Q enter button does not.

  screen-on the built-in keyboard works is that all the other keys work.
  I have reinstalled the keyboard from the device manager driver, then perform full system recovery and still does not.

  Hello

  It looks like a malfunction of the simple keyboard in this case, you will need to replace the internal keyboard. Otherwise, you can use the USB keyboard

• Satellite M30: Wireless light does not come

  My wireless on my laptop light is not.
  I switch wireless enabled but the light does not come and my router is turned on.

  Also, I can't check the local networks.
  Could someone help me identify this problem?

  Hello

  The wireless network card is properly installed and listed in Device Manager? To check first please all NICs.

• PPP light does not blink

  The ppp of light does not illuminate & cannot connect 2 sites only 2. Always have access to all other Web sites & email. What can I do to fix this?

  Hello

  These websites is secure? You did changes to the computer?
  What Internet browser do you use?

  Method 1.
  For modem problem, you can contact the modem manufacturer. As far as websites are concerned, I would ask to add these sites to the zone of confidence and check.

  Method 2.
  a. If the problem persists, I recommend allows you to optimize the internet explore.
  See the article below for steps optimize internet explore. Also check if you can access these webistes in mode without modules if you have Internet Explorer 7 or above.
  http://support.Microsoft.com/kb/936213
   
  b. If nothing works to solve the issue try reset Internet Explorer.
  How reset internet Explorer?
  http://support.Microsoft.com/kb/923737
  IE reset warning:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  I hope this helps.

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• Touch Pad v7.5 light does not, if I turn off the red light button lights up.

  Synaptics Touchpad white light v7.5 works do not, if I turn off the TouchPad, the red light does not illuminate. Is there a fault or is it possible to turn it on?

  The TouchPad seems to work fine

  Thanks for the ansswer...  He solved the problem.