Format of the session of UDP veristand streaming of data flow

Similar Questions

• When the file is transferred to the complete PC in a record of data of Veristand Sessions?

  Hello

  I use the NOR - Veristand - Startand Stop Logging of data Sessions to initiate and conclude the backup on a RT of the data target.

  I noticed that the actual target RT to PC data transfer is done once recording has stopped after the call to Stop Logging of data.

  

  Is there a way to control or at least to check when the data transfer is complete?

  I want to read and possibly to empty the contents of the newly created tdms file in another repository. For a large file, the transfer may take a few seconds, and no doubt my candidacy would open the file before he knew that the transfer was complete with all data...

  I could check the file of course size and see if it continues to change... but there should be a better way to do it.

  THX.

  L

  PS: another post on the subject is here, related to the use of UDP for data recording... But it's more for streaming, which is different than what is done about this post.

  The API you're referring to the target data streams to be connected directly on the host computer. The only generated log files are always on the host computer. In addition, when the command Stop Logging is completed, you are sure that the log file has been closed and no additional data will be get connected to it.

• RECORDING OF THE SESSION OF ASA

  Hi all

  We need to capture the session information from ASAs used for VPN traffic. The requirement is pretty basic, but in particular, we need to capture information about entering any Connect VPN which will then be allowed to hairpin on the Internet. The minimum information we need to connect are the IP address of the Source of the connection of the VPN client, LAN IP and then allotted if the hairpining Internet address allocated public IP and finally the VPN user name. We use PRTG network monitor, but do not know if he will accept the session log files.

  Any ideas on how to achieve this?

  Thank you

  Hello

  To my knowledge you already send Syslogs to a server, then to connect building/disassembly for VPN users messages, you should see the VPN username inside (en).

  The Syslog ID are the usual connection building/disassembly IDS which are

  • 302013 (Build TCP)
  • 302014 (TCP disassembly)
  • 302015 (Build UDP)
  • 302016 (UDP disassembly)

  The TCP connections log message format is for example

  302013
  Error Message    %ASA-6-302013: Built {inbound|outbound} TCP connection_id for interface:real-address/real-port (mapped-address/mapped-port) [(idfw_user)] to interface:real-address/real-port (mapped-address/mapped-port) [(idfw_user)] [(user)] 
  
  302014
  Error Message    %ASA-6-302014: Teardown TCP connection id for interface:real-address/real-port [(idfw_user)] to interface:real-address/real-port [(idfw_user)] duration hh:mm:ss bytes bytes [reason] [(user)] 
  
  As you can see that they contain information about the 'user' (user name), "real address" (ip address, the client has received), 'address topographiee' (public ip to which the connection has been coordinated address) as well as the information where the user is connected.
  EDIT: You mentioned that you want to save the source address of actual VPN connection also? To do this, you will probably need to look for some other ID Syslog
  The actual information on the Syslog message ID can be found here
  http://www.Cisco.com/en/us/docs/security/ASA/syslog-guide/logmsgs.html#wp4770603
  Unfortunately, I can't really comment on the PRTG
  -Jouni
  		   

• I have the two Master Sync activated WITHOUT be asked for master password said at the start of the session and password?

  The basic question is that whenever I start Firefox, I am invited, a few seconds later, my master password, regardless of if I will actually connect a site for which I saved my credentials.
  This same number as well as a replica of his original poster chosen as the best answer has been published on the following link: https://support.mozilla.org/en-US/questions/1039575

  I'm in the same situation as this poster, but I don't want to turn off sync. I need the master password set to protect my passwords stored, and I need the Sync feature enabled to share my profile between different computers that I use.
  If I close the master password prompt at the start of the session and then I go to a page that I recorded the password, I should I get prompted again, and that's all I need. Also, I've installed Sync do NOT share my passwords stored, where the master password invite so that the effect is useless in my case.

  So the question is simply how can I turn off the prompt for password at startup, have it pop up when you access a site that needs a password stored (or ask if I want to save a) and keep the clock running without sharing passwords.

  Thanks in advance.

  No, this is not possible.
  Sync must retrieve the journal of authentication data in password manager and which requires to enter the password to unlock the password.

  The synchronization used in Firefox 34 version then use password manager to store the name (e-mail) and password to use to connect to the synchronization server.
  The chrome://FirefoxAccounts entry in the Password Manager stores (kA and kB) credentials in JSON format.
  Earlier versions of Firefox used to store these data in the signedInUser.json file in the profile folder, but the current version only stores the sessionToken in this file and must the Manager password for the credentials of the synchronization.

• 5132: "the format of the string is not supported.

  Hello

  I'm listening channels of my new USB-5132 on the disk at the same time, using the c# example "scope: live stream To Disk.  I entered "0:1" (without the quotes) in the channel name box.  The result is the error "the format of the string is not supported.  Is there another syntax or example that will allow me to broadcast two channels of 5132 on disk?

  Thank you

  Penny

  Hi Penny,

  Channel string syntax

  If you try an empty string or a string separated by commas (as in "0.1") do you still see this error?

  What version of NOR-SCOPE do you use?  You can find it in Measure & Automation Explorer under software.

  Also, I would be interested to know if you have other devices (besides the 5132) which show the same behavior.

  -Andrew

• Failed to set the specified property while the session is running - 6552

  I created a program to run several different scripts.  The first time through my program works perfectly.  The second time through (without reset of the card, or re - download vectors etc.) but it fails.

  As he tried to run the following command:

  niHSDIO_ConfigureDataVoltageCustomLevels (DIO3_acq_session, 11-13, 18, 19', 1.8, 2.0)

  I have the following error:

  "Specified property cannot set while the session is running.
  Set the property before the opening of the session, or abandon the session before setting the property. »

  Any suggestions on what could happen?  Alternatively, any advice for troubleshooting techniques to learn more about the problem?

  I found my error:

  Several of my scripts include a list of markers so that the records are captured, and I download the recordings captured later.  Whenever I'm about to run a script that has files, I made the "niHSDIO_ConfigureAcquisitionSize" function in order to identify the size and quantity of records.

  However, the first script in my program that I run I don't need records captured, so I didn't bother to call the function "niHSDIO_ConfigureAcquisitionSize".

  So, first map like the default setting for the number of records for the first script (in which I do not bother with all the captured records), but then the subsequent pass in my stream of test cards do not like the fact that I have had set up for many more records that he caught (lack of markers / triggers).

  It's a little confusing to explain, but I found the problem, so any help is needed.

• Convert the Period_Name in GL_JE_Lines table to a date format and then come back year

  I'm working on a data model BI Publisher and I try to convert the Period_Name in GL_JE_Lines table to a date format and then return of the year.

  The sql below works in 11i, but I can't make it work in Fusion.

  to_char (to_date (l. )) period_name , ' MON-RR ' ),'YYYY')
  
  Any ideas?

  Hi Jennifer,.

  To_char (sysdate, 'DDMONYYYY') in BI Publisher does not return a correct results due NLS_DATE_FORMAT/DATE_LANGUAGE settings.

  According to the standards of the I18N, NLS_DATE_LANGUAGE in the database is still hardcoded to NUMERIC_DATE_LANGUAGE. NUMERIC_DATE_LANGUAGE 'MY' in a date format mask is an integer, so you see the correct value.

  You're not supposed to publish direct SQL with fixΘe format masks (unless it's some sort of canonical format used in internal processing, including the end-user will not be), you should return language digital date to the mid range and then make the formatting of y.

  Workaround

  Try adjusting the NLS_LANGUAGE in SQL data model to override formatting from of the

  Data base and values of the Session, for ex: select to_char (sysdate, 'MON-DD-YYYY', 'NLS_DATE_LANGUAGE = AMERICAN') of double;

  I got this Oracle support after lifting a SR.

  Thank you

  Rahul.

• by the way the Session variable of type DATE for opaque filter data view

  Hello world

  You guys can help me please by passing the session variable of DATE in physical layer 'view opaque' data type filter RPD to Oracle database

  I tried following syntax, syntax wise, I didn't get any error, but at the same time this opaque view is not fetch all the records as well. my session variable is 'End_date' and its value is 1998/12 / 31:00:00:00(as_shown_in_RPD_session_windows,_datatype_is_DATETIME)

  SELECT AMOUNT_SOLD, CHANNEL_ID, CUST_ID, PROD_ID, PROMO_ID, QUANTITY_SOLD, SH. SALES TIME_ID

  WHERE TIME_ID = TO_DATE (' VALUEOF (NQ_SESSION.) END_DATE) ", ' MM/DD/YYYY')"

  SELECT AMOUNT_SOLD, CHANNEL_ID, CUST_ID, PROD_ID, PROMO_ID, QUANTITY_SOLD, SH. SALES TIME_ID

  WHERE TIME_ID = TO_DATE (' VALUEOF (NQ_SESSION.) ("' END_DATE ')", ' MM/DD/YYYY') "

  SELECT AMOUNT_SOLD, CHANNEL_ID, CUST_ID, PROD_ID, PROMO_ID, QUANTITY_SOLD, SH. SALES TIME_ID

  WHEN TRUNC (TIME_ID) = TO_DATE (' VALUEOF (NQ_SESSION.) ("' END_DATE ')", ' MM/DD/YYYY') "

  In the past, I could spend a session variable in an opaque display by using the DATE filter, but which was in DB2.

  I appreciate your time and help

  Finally, I had good format. It's here

  TO_DATE (substr ("valueof (NQ_SESSION. End_date)', 1, 10), "yyyy-mm-dd")

  and here is the source where I got this information

  Using Variables in Session OBIEE in some tables of the physical layer

• What apex application to get the session?

  Hello!
  
  Can someone tell me what app to get the session? I use the plugin for the menu drop down and now I have to put the link for the page. I tried to put the link like this f? p = & APP_ID.:2: & SESSION. for browser could use it as localhost: 8080/apex / * f? p = 1000:2:386966391988601: *, but this does not work for me. I also try to put as f? p = 1000.:2: & SESSION. (error I get is Bad request HTTP client sent a request to this server could not understand). or f? p = 1000:2: (here I must log in evry time I want to use this link) and nothing works well for me.
  
  Kind regards
  Dragan
  
  Published by: drama9346 on 26.4.2012 04:11

  The must be in

  HTML Header
  

  and not in

  Page HTML Body Attribute
  

  .

  It's in the right place?

  To test, it adds an alert after the assignment.

  The loading of the page, you should get the alert with the App Id.

  The second thoughts, literature wrote

  To use this menu, you'll need a source of data that provides menu options in the format: ID, Parent ID, name, link and level. 
  

  So why not fill the APP_ID and the Session in the link to the help

  Select ....
  'f?p=' || v('APP_ID') ||':'|| page_no ||':'||v('SESSION') link,
  ....
  

  Kind regards

  Published by: Dominique on April 26, 2012 17:52

• How to check the Session Variables using the analytical web dashboard

  This is my first post. Easy points to the first right answer... If I can figure out how to give points.
  
  Problem: I need to know how to check that the Session Variables with the Administration of Oracle BI tool are used by the web analytics tool.
  
  Environment: Windows running Oracle 10g BI. Connect to the database using web analytics http:// < server >: 9704/analytics, web analytics is running in a windows Explorer browser.
  
  Current situation: the analytical tool is connected to the database and I can use the screen of "Answers" to the table edge to probe the tables look and things as expected.
  In the administration Oracle BI tool I can see the session of web analytics and I see that he thinks that the Session Variables are set correctly.
  I have reasons to doubt that the analytical tool is to get the right variables and I need to check it out.
  I know that I should use the 'Answer' window to create a shape any of a query that includes NQ_SESSION. < my variable >, but I can't understand what the format should be doing the work.
  
  That's all I need.

  What I do is insert a text in my dashboard object and then set the properties of the text object to display the variable.

  for example to display the DISPLAYNAME variable, the text object properties are:

  User: @{biServer.variables ['NQ_SESSION.]} {[DISPLAYNAME']}

• Calculate the Date difference in the session variable

  I use the following to try to establish the number of difference in days between the dates of two different recordsets. The result using test data should be 15, but I get 0. No code error message, but no accurate result either. I checked the date two values involved, and they send the data appropriate to the right format... just can't get the DateDiff function to work in the session... variable all help greatly apprciated.
  
  Code:
  
  < % Session("Lead") = DateDiff ([d], [rsSurvey.Fields.Item("tblShipDat"). Value], [rsOrder.Fields.Item("tblValDat"). % of value]) >

  Thank you very much for any assistance... it was indeed the brackets surrounding table columns names that have crossed upwards. Correct solution:

  < %="">< br="">Session("Lead") = DateDiff ("d", rsSurvey.Fields.Item("tblShipDat"). Value,< br="" >="" rsorder.fields.item("tblvaldat").="" valeur)="">< br="" >="" %="">

  All entries are greatly appreciated. Really the non-professional coder help advance...

  Kind regards

  Chris Robinson

• using the session variable in init. variable init string of session. block

  Hi, experts,
  
  is it permissible to use a session variable loaded (A) in the initialization string in the block of the initialization of the session to another variable (B).
  
  for example,.
  in execution, priority of the initialization of B block, added the initialization of a block
  
  then in the initialization string in the initialization of B block,
  
  the likes of sql:
  
  Select a clause where a.xxx = yyy ' valueof (nq_session. (A)'
  
  What is the correct syntax?
  
  Thank you very much!

  This is the correct format. If it does not work for you then you need to give more information than what is happening, how fill you your Init blocks etc.

• Session variables are available after a restart of the session?

  Hello
  I have a package when I update some variables. All these variables are "non-persistent". In case of error, the values of the variables will keep after you restart the session? Do I have to put my variables 'historize' or 'value' last to achieve this? Any help is appreciated

  Ok

  Overall, a new instance of the variable, which is "declared" then put it in the stream as a first step.

  I tried on my side and works well...

• format of the clock after upgrading to IOS 10

  After the upgrade to IOS 10.0.2on my iphone 6 s the clock passed using two points using a format point.

  Language and region are still like before upgrade: Norway.

  I tried to change in various other regions which, to my knowledge, uses the same format of the clock, but there is still a point. Is there another way to change this?

  Hi, ferdinanden!

  Thank you for reaching out by Apple Support communities. From your post, I understand that your clock is not displayed as expected in the iOS 10. Rather than see a colon, showing time as 07:32, you see just one point, displaying the time as 7.32. I would be happy to offer help!

  There could be a few different things going on to cause this, and change your region has been a great first step to understand that and fixing it. Given that this did not help, try the following steps. Before you start, use this article to create a backup of your iPhone: How to back up your iPad, iPhone or iPod touch
  

  1. Replace it with another under settings > general > language and region. See if that allows you to adjust the way in which the clock is displayed. If so, revert to the language of your choice and see if she spends exactly the point again.
  2. Make sure that the value is automatically enabled under settings > general Date & time
  3. Restart your iPhone by following the steps here: restart your iPad, iPhone or iPod touch
  4. Reset your iPhone settings in settings > general > reset > reset all settings. This will not delete your personal data (such as your photos/videos, contacts, calendar of events, etc.) but it can reset it customizable settings (as the wallpaper / brightness, alert sounds/ringtones, the Date and time settings, etc.) to their default values. It will also remove saved passwords and Wi - Fi networks and all previously used settings APN or VPN.

  Have a great day!

• I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  Hello nancy milano,.

  Thanks for this info and choosing the communities Support from Apple. I know how important is able to complete your update to El Capitan at a later date! The good news is that you can simply delete the "install Mac OS X" install app in the Applications folder on your Mac. Then you can open the Mac App Store when you're ready to update and restart the download from the tab updates or searching through the Mac App Store for El Capitan. This is a resource that explains the process of update more:

  Update of OS X El Capitan

  See you soon!