RECORDING OF THE SESSION OF ASA

Hello

To my knowledge you already send Syslogs to a server, then to connect building/disassembly for VPN users messages, you should see the VPN username inside (en).

The Syslog ID are the usual connection building/disassembly IDS which are

• 302013 (Build TCP)
• 302014 (TCP disassembly)
• 302015 (Build UDP)
• 302016 (UDP disassembly)

The TCP connections log message format is for example

302013
Error Message    %ASA-6-302013: Built {inbound|outbound} TCP connection_id for interface:real-address/real-port (mapped-address/mapped-port) [(idfw_user)] to interface:real-address/real-port (mapped-address/mapped-port) [(idfw_user)] [(user)] 

302014
Error Message    %ASA-6-302014: Teardown TCP connection id for interface:real-address/real-port [(idfw_user)] to interface:real-address/real-port [(idfw_user)] duration hh:mm:ss bytes bytes [reason] [(user)] 

As you can see that they contain information about the 'user' (user name), "real address" (ip address, the client has received), 'address topographiee' (public ip to which the connection has been coordinated address) as well as the information where the user is connected.
EDIT: You mentioned that you want to save the source address of actual VPN connection also? To do this, you will probably need to look for some other ID Syslog
The actual information on the Syslog message ID can be found here
http://www.Cisco.com/en/us/docs/security/ASA/syslog-guide/logmsgs.html#wp4770603
Unfortunately, I can't really comment on the PRTG
-Jouni
 
         
 
         
 more
 
		 
 Tags: Cisco Security
 
         
         
 
          
Similar Questions
 
          
 
            
           
 
		     
Problems with playback and the recording of the sessions
 
			 
Hi, covered!
I met two annoying problems:
(1) for some unknown reason, reading in new sessions is limited to-3db. So when I start a new session 16/41000 and import an mp3 commercial track just to check its spectrum or the tone, it's only hit - 3d on a meter, but it should be as 0db and cutting. Follow-up volume = 0, master volume = 0. I've never seen before, it happened to my Audition for a week or two, and I'm pretty shure I wouldn't change a thing.
(2) for the recording of the huge sessions with titles of 35-45 or more, sometimes it suggests to save without modifying the audio files, too (so I find myself with fresh, fresh generals (2), (3), (4), etc.) It's the most annoying thing, baaargh!
All of the pieces of advice?
			 
Potapka wrote:
(1) for some unknown reason, reading in new sessions is limited to-3db. So when I start a new session 16/41000 and import an mp3 commercial track just to check its spectrum or the tone, it's only hit - 3d on a meter, but it should be as 0db and cutting. Follow-up volume = 0, master volume = 0. I've never seen before, it happened to my Audition for a week or two, and I'm pretty shure I wouldn't change a thing.
Hmm... go to Preferences > multitrack and reset the stereo panning mode to l/r cut logarithmic and no - 3dB Center. This will not happen then.
(2) for the recording of the huge sessions with titles of 35-45 or more, sometimes it suggests to save without modifying the audio files, too (so I find myself with fresh, fresh generals (2), (3), (4), etc.) It's the most annoying thing, baaargh!
Yes, it's boring. If you are absolutely sure that they are not modified, then remove additional ones. You can take a look at Mediasweeper too.
Hi, covered!
All of the pieces of advice?
Please use English spelling normal - this way, I don't feel as if I want to run...
		   
 
            
           
 
		     
How can I record the sessions of navigation and reopen it in Firefox 4?
 
			 
I don't have tools and options with all this that cutesy c * like FF used to have. FF4 has two bars of different option under Firefox Orange drop-down list menu, and another drop options to the bottom of the menu box options. So how the hell do I record a browsing session? So how do I open it again? Can I put this thing to reopen the last browsing tabs session as normal browsers do? And I can get this stuff without crushing the thing cursed every 5 minutes? Thank you-keimanzero
			 
For FF:
... Why I have to jump through obstacles to get the FF reload my previous session? Why change something that already works? "it works,

SECOND OF ALL, if I close FF and then click on a link somewhere in a Microsoft Word, then FF will open it! and guess what? Restore previous session will be grayed out.
ESPECIALLY, when you see "26 of 58 people found this answer helpful" that means that you...
Here it says "Add image." I would have taken a dump, take a picture of it and put everything here... FF does not deserve my dump!
Edited by a moderator because of the language. See the rules and lines guidelines .
		   
 
            
           
 
		     
How to prevent a counterpart of the school session easyvpn ASA
 
			 
Hi all!
Please someone explaint how to prevent school session easyvpn ASA with the help of the external source of a customer address filtering a host.
Thank you is advanced.
			 
If you want to deny access from a certain ip address known vpn, then you can do that using an access-control list plan:
access-list foo deny udp host 1.1.1.1 all isakmp eq
foo ip access list allow a whole
Access-group foo in interface out-of-control plan
(if you have IPsec over TCP or via UDP configured IPsec, you may need to modify the ACL accordingly).
The option "control-plane" means that this acl is applied to traffic destined to the ASA itself, while a normal ACL apply only to traffic passing by the ASA.
HTH
Herbert
		   
 
            
           
 
		     
Use the session variable in insert record
 
			 Help, please!


I need to add a record to a table; one of the fields in the table is the user_id. When I try to use the insert record server behavior, there is no way to select the session user_id variable!
How this is done?			 
> I need to add a record to a table. one of the fields in the table is the
> user_id. When I try to use the insert record server behavior, there is no
> way
> to select the session user_id variable! How this is done?
Use a hidden form variable and assign the value of the session.
		   
 
            
           
 
		     
I have the two Master Sync activated WITHOUT be asked for master password said at the start of the session and password?
 
			 
The basic question is that whenever I start Firefox, I am invited, a few seconds later, my master password, regardless of if I will actually connect a site for which I saved my credentials.
This same number as well as a replica of his original poster chosen as the best answer has been published on the following link: https://support.mozilla.org/en-US/questions/1039575
I'm in the same situation as this poster, but I don't want to turn off sync. I need the master password set to protect my passwords stored, and I need the Sync feature enabled to share my profile between different computers that I use.
If I close the master password prompt at the start of the session and then I go to a page that I recorded the password, I should I get prompted again, and that's all I need. Also, I've installed Sync do NOT share my passwords stored, where the master password invite so that the effect is useless in my case.
So the question is simply how can I turn off the prompt for password at startup, have it pop up when you access a site that needs a password stored (or ask if I want to save a) and keep the clock running without sharing passwords.
Thanks in advance.
			 
No, this is not possible.
Sync must retrieve the journal of authentication data in password manager and which requires to enter the password to unlock the password.
The synchronization used in Firefox 34 version then use password manager to store the name (e-mail) and password to use to connect to the synchronization server.
The chrome://FirefoxAccounts entry in the Password Manager stores (kA and kB) credentials in JSON format.
Earlier versions of Firefox used to store these data in the signedInUser.json file in the profile folder, but the current version only stores the sessionToken in this file and must the Manager password for the credentials of the synchronization.
		   
 
            
           
 
		     
Make the midi recording when the track is not selected
 
			 
Hi, asking for my friend and will try and find a solution when I get home, but...
My friend (using logic 9.1.8) made some record with about 12 actors/singers alive. I suggested to him that he must save the midi for keyboard player (who is also the composer of all parts) as well as the audio just to give them some flexibility later. It is a great keyboard player and uses its own external keyboard. (i.e. not logic instrument). All the other singers/actors are all audio.
So it is easy to implement but as such sessions can become a little hectic and although the midi for keyboard track is in record mode, the midi does not record unless the track is selected on the left. Sometimes, in the madness of him the entire midi track remains not selected and if the midi data does not get saved. Is it possible to routing in the environment where the midi will get recorded although the midi track is not selected? Don't forget, the midi track is always made armed.
Thank you very much
			 
Looks like you entered only followed for the targeted track has allowed...
This picture isn't in X 9 - but it's the same setting...
Make sure that this is not the case-
		   
 
            
           
 
		     
Failed to set the specified property while the session is running - 6552
 
			 
I created a program to run several different scripts.  The first time through my program works perfectly.  The second time through (without reset of the card, or re - download vectors etc.) but it fails.
As he tried to run the following command:
niHSDIO_ConfigureDataVoltageCustomLevels (DIO3_acq_session, 11-13, 18, 19', 1.8, 2.0)
I have the following error:
"Specified property cannot set while the session is running.
Set the property before the opening of the session, or abandon the session before setting the property. »
Any suggestions on what could happen?  Alternatively, any advice for troubleshooting techniques to learn more about the problem?
			 
I found my error:
Several of my scripts include a list of markers so that the records are captured, and I download the recordings captured later.  Whenever I'm about to run a script that has files, I made the "niHSDIO_ConfigureAcquisitionSize" function in order to identify the size and quantity of records.
However, the first script in my program that I run I don't need records captured, so I didn't bother to call the function "niHSDIO_ConfigureAcquisitionSize".
So, first map like the default setting for the number of records for the first script (in which I do not bother with all the captured records), but then the subsequent pass in my stream of test cards do not like the fact that I have had set up for many more records that he caught (lack of markers / triggers).
It's a little confusing to explain, but I found the problem, so any help is needed.
		   
 
            
           
 
		     
LINKSYS WRP400: Voice recorded but the number doesn't work don't no (not in service) (no SIP response)
 
			 
Hello everyone,
I have a weird and frustrating problem with some Linksys WRP400 and I hope you can give me advice.
Long story short: the voice on the WRP400 line keeps stop working, even if it is registered on my SIP PBX. Only a reboot of the router or a stop put on the line temporarily fix the issue.
Let's add some details: I had a lot of WRP400 installed and running, and not all of them have this problem. They all have the same configuration.
I tried to work around the problem, reducing registry expires 3600 to 1200, defining to call without Reg and years call without Reg, setting on restrict the IP Source address and reset daily at 05:00. It doesn't seem to help.
When the problem occurs, if I call the voice line number I get an error "the number you have dialed is not in service" or similar. Sometimes my clients said they can make an outgoing call, while the problem is still on, but more often, the line is totally silent on the outbound road.
On my SIP PBX, I see that the number is regularly recorded, with the right timing.
If I do a sniff of Wireshark on my SIP PBX, I see some regular "ask: INVITE sip:[email protected]/ * /: 5060; transport = udp, with description of session' a PBX to the router but the router never answers.
If I reboot, the vocal line to re-register and start working again.
I have attached a screenshot and the Wireshark Sniffer.
I use the 2.00.32 latest firmware.
You have any advice? It becomes an annoying problem and I am groping in the dark.
Best regards
Maurizio
PS: Should I I asked Belkin or is it always in the right place?
---
http://about.me/mauriziotroilo
			 
Hi, we use the WRP400 of the years and the voice module has always been problematic.
I have a theory on this problem: I think that the safety function to "Restrict the IP Source address" crashes after a few hours of regular work and it filters all incoming SIP messages.
You can confirm this idea by turning on the trace of the sip. In my case the trace shows all SIP entering until the reboot request.
Can I ask you how many CPES you have?
What is the frequency of this problem?
In our network, we have about 2000 installed platform and we must restart on unit 2-3 per day.
Kind regards.
		   
 
            
           
 
		     
With the help of ASA for our VPN
 
			 
I was curious, if through the ASDM, there is a way to show that was recorded in the last week and for how long?  I know through the CLI I can use the sh sessiondb-vpn l2l to see who is connected, but trying to get a report of its total use by user, date and time?
			 
Hi Dan,.
The ASA does not all historical data connections so it won't be possible.
You can view the users connected to the part followed by ASDM but you do not have the reporting features.
Kind regards
Nicolas
		   
 
            
           
 
		     
The upgrade of ASA 5520
 
			 
Has just received a new ASA 5520 and I'm trying to update the ASA s/w to 7.2 and the ASDM to 5.2. I copied the Flash files, but when I run "asdm image flash: / asdm521.bin ' I get an error that it is not an image file and I don't know where to start with the ASA. Any help would be appreciated. I can't find any info in my documentation.
			 
Try this,
To update/install the ASDM follow the example of the procedure,
ASA (config) # copy tftp flash
Address or name of remote host [xxxx]?
Source [pix704.bin] file name? ASDM - 504.bin
Destination file name [asdm - 504.bin]?
Access t... ftp://x.x.x.x/asdm-504.bin!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Writing flash file: / asdm - 504.bin...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
5958324 bytes copied in 165,460 seconds (36111 bytes/s)
ASA (config) #.
ASA (config) # sh flash
Directory of flash: /.
7 rw-5437440 21:12:42 pix704.bin 24 November 2005
5919340 - rw - 11 20:59:06 November 24, 2005 asdm - 504.bin
-7017 rw-13 14:00:58 22 July 2005 admin.cfg
ASDM - 504.bin is now copied into the flash. We should now set to use PIX
This image to load ASDM.
ASA (config) # asdm image flash: / asdm - 504.bin
Final steps involve configuration running record in memory as we
changes to boot files and reload the PIX.
ASA (config) # write memory
Building configuration...
Cryptochecksum: d4f498de e877e418 2f9effa7 62ca0d6b
4807 bytes copied in 3.20 seconds (1602 bytes/s)
[OK]
ASA (config) # reload
Once the PIX comes back to the top, we can check that upgradation succeeded
using the command 'show version '.
Consult the ASDM upgrade procedure
http://www.Cisco.com/en/us/customer/products/HW/vpndevc/ps2030/products_tech_note09186a00804708d8.shtml#T8
I hope this helps... all the best... the rate of responses if deemed useful...
REDA
		   
 
            
           
 
		     
Save the session before disconnecting
 
			 
Hi to everyone.
Could the ultimate function of windows 7 like that?
Could they 'save' my session in the case of an immediate restart? We need automatic replacement
for example several IE Windows with its open tabs, in the State that they were before the action.
I saw this on some GNU/Linux distributions.
			 
Hello
Welcome to the Microsoft community. I'll help you with this problem.
Looks like you want to know if you can record the session Internet Explorer in case of an immediate restart.
Yes, Internet Explorer sessions will be saved in case of an immediate restart, and next time when you open the Internet Explorer window will ask you to choose Restore last session.
Additional information.
Please refer to this link: http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/when-using-restore-last-session-manually-in/e20aecd7-f27d-e011-9b4b-68b599b31bf5
I hope this helps.
		   
 
            
           
 
		     
by the way the Session variable of type DATE for opaque filter data view
 
			 
Hello world
You guys can help me please by passing the session variable of DATE in physical layer 'view opaque' data type filter RPD to Oracle database
I tried following syntax, syntax wise, I didn't get any error, but at the same time this opaque view is not fetch all the records as well. my session variable is 'End_date' and its value is 1998/12 / 31:00:00:00(as_shown_in_RPD_session_windows,_datatype_is_DATETIME)
SELECT AMOUNT_SOLD, CHANNEL_ID, CUST_ID, PROD_ID, PROMO_ID, QUANTITY_SOLD, SH. SALES TIME_ID
WHERE TIME_ID = TO_DATE (' VALUEOF (NQ_SESSION.) END_DATE) ", ' MM/DD/YYYY')"
SELECT AMOUNT_SOLD, CHANNEL_ID, CUST_ID, PROD_ID, PROMO_ID, QUANTITY_SOLD, SH. SALES TIME_ID
WHERE TIME_ID = TO_DATE (' VALUEOF (NQ_SESSION.) ("' END_DATE ')", ' MM/DD/YYYY') "
SELECT AMOUNT_SOLD, CHANNEL_ID, CUST_ID, PROD_ID, PROMO_ID, QUANTITY_SOLD, SH. SALES TIME_ID
WHEN TRUNC (TIME_ID) = TO_DATE (' VALUEOF (NQ_SESSION.) ("' END_DATE ')", ' MM/DD/YYYY') "
In the past, I could spend a session variable in an opaque display by using the DATE filter, but which was in DB2.
I appreciate your time and help
			 
Finally, I had good format. It's here
TO_DATE (substr ("valueof (NQ_SESSION. End_date)', 1, 10), "yyyy-mm-dd")
and here is the source where I got this information
Using Variables in Session OBIEE in some tables of the physical layer
		   
 
            
           
 
		     
To access the Session Bean?
 
			 
Hello
With the help of Jdev 11.1.1.7.0. mrequirement is I need to access session Bean on the Module of the Application.

so I use this way in my implementation of the application module class .
SessionBeanClassName sessionBeanClassObject is JsfUtils.getManagedBean ("recorded in the adfc-config sessionBeanName").
I can able to access via the module of the application.
My question is:
1. is this good sense?
2. No Impact on this approach?
3. is this a good practice?
4 is one way to access the variable from Session Bean on the application module.
Thank you.
			 
Q2) the impact is that you break the mvc pattern and therefore the model of coupling to the display. Later, this can be a problem because your application doesn't fit. Add pass you ui state model (am) you might encounter problems when querying comes into play.
Sample of Q4) Chris did not access to a bean in scope session leave an application module, but how to get there from an another view layer bean.
Joel Ramamoorthy-Oracle and Cvele_new_account and myself you asked before, without a real use case all we can say is: don't access scope the model layer session bean.
Timo
		   
 
            
           
 
		     
The task of the Session information, as follows,
 
			 Hello


After the execution of any scenario - I want to insert / update the session ID in the target table for each record.


Let's say 100 records are updated and 50 are now inserted as a result of the execution of any of IKM.
now I want to update the ID of session on all these inserted and updated the file. What is the best way to do it?


Secondly - if it was updated / inserted in a time / task of IKM - should I update task ID / or session id?




See you soon			 
Hello
You have 2 ways:
1)
In your target table, create a field that contains the ID of this session.
You have the choice:
* only 1 field: it will be updated if necessary
* 2 fields: 1 for the insert row, 1 for the update
In your interface, mapp the fields with the following mapping:

<%=snpRef.getSession( "SESS_NO" )%>
(if you have 2 fields, beware of the indicators of insert/update)
2)
You can also change your IKM to do it automatically:
* create an option in your IKM who will receive the name of the column
* in the steps "insert new lines" and "updating a line", adds< %="snpRef.getSession" (« sess_no »)="" %="" >="" à="" la="" fin="" de="">